Carrying forward accounts with value as '0' (zero) for consolidation

Hi,
I have a query regarding carrying forward accounts with value as '0' (zero) for consolidation. Actually when there is any account having zero value then on calculating contribution the value is carried only to Parent Currency Total dimension. After proportion level the value for that account becomes null. Can anyone suggest if there is a way where i can carry the value 'zero' till value dimension "Contribution Total".
Thanks in advance

Hi,
couldn't you do a rule that copies from PCT to proportion level ( either this level or one above that lets you have rule input)

Similar Messages

The document contains no posting lines with value other than zero

Hi!
We are having problems posting a invoice in MIRO. When entering the PO number we receive the error message "The document contains no posting lines with value other than zero".
What could be the problem?
/Anders

Hi!
The GR_BASEDIV is set in the PO. The PO is replicated from SRM where this flag has been set for no reason. Only GR and IV are set and we have implemented a note 1155266 so that Confirmation-Related IV will not be set.
How come it is set anyway?
Sincerely
Anders

Carry forward of variable value in cross-tab charts

Hi Experts,
I have a cross-tab which calculates the inventory of items (based on count). For a particular date range (quarterly here), if i have to generate the cross-tab, i set the inventory count to zero for the first quarter, and from the next quarter, i add to the inventory count, the new inventory items. At the end of each quarter this value gets accumulated and gets carried forward to the next quarter. From the next quarter, it just is the sum of count of the new items. Now, i have this cross-tab calculate the values at WhilePrintingRecords evaluation time.
When i have created a chart out of this cross-tab, the chart doesnt reflect the values that are observed in cross-tab.
Is there any way i can get these calculated values to get reflected on the chart?
Your help is greatly appreciated.
Thanks,
Roshan.

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly

GL Balance carry forward have wrong value in FS10N ?

Hello
i use FS10N to see value GL99600.
in year 2009
i have cumulative value 1,587,437,736.05 at end of year 2009
but in year 2010 cumulative value beginning of year = 2,156,975,057.43
why system have different value between 2 year ?
in OB53 my system have 5 GL set for Balance carry forward.
and GL99600 is in one of 5 GL.
you can see picture of year 2009,2010 in link below.
http://www.flickr.com/photos/53547794@N06/4948154682/
http://www.flickr.com/photos/53547794@N06/4948171380/
please help

Hi,
Do once again balance carryforward to fiscal year 2010 in test run mode (select balances in retain acct)so you can able to see the balances to be carryforward.
Check the balances with t.code FAGLB03 instead of FS10N.
Regards,
Sankar

Carried forward Account for Alternative Chart of Account

Hi Experts,
I'm implementing an alternative chart of account for France Company (local chart of account). Now I have to insert the Account related to Carried forward (transaction code OB53). Do you have any suggestion? which is the GL code account?
Another question, must I create the management accounts and I have to associate these accounts in the Operative Chart of accounts?
Thank in advance
Kind Regards
Giampaolo

yes u can do
fist
u can make the entry and blank valuation class and give the gl account in wrx
so that it will take this GL account for blank materia number
or
u cna give valuation class to material group
MM purchasing -- materal master -- Entry Aids for Items Without a Material Master
hope this helps

HOW TO CARRY FORWARD RG1 CLOSING BALANCE TO OPENING BALANCE FOR NEW FISCAL

Hi Experts
How to carry forward the RG1 closing stock at the year end to opening balance of Rg1 for new year.
Wt are the steps required for closing activity of RG1 and carry forward closing balance of last year to opening balance of new year.
Thanks

Hi Rohan,
For RG1 and RG23 A Part I and RG23 C Part I
Go to SE16, here enter Table Name - J_2IRG1BAL and Click on "Create" button in initial screen, it will give the maintenance screen. Here mainatin following;
For each of these materials, you have maintained the material form in table J_2IRG1BAL as below. Do not make any entries in fields that are not listed below:
EXGRP - Materialu2019s excise group
DATUM - Date from which RG1 report is required, normally the date of going live
MATNR - Material
FORM - Enter P (Packed) or L (Loose). Do not leave this field blank.
WERKS - Leave this field blank.
OP FN UOM, OP BN UOM, CB FN UOM - Leave these fields blank. All quantities in this table are updated in the base unit of measure of the material
USNAM - User ID of the person filling out the table.
CPUDT - Date of entry
CPUTM - Time of entry
Note: - This is to be done before J1I5, J2I5.
Also refer link;
Update of Registers RG 1 and RG 23 (Part I)
For RG23 A Part II, RG23 C Part II and PLA
Go to SE16, here enter Table Name - J_2IACCBAL and Click on "Create" button in initial screen, it will give the maintenance screen. And maintain following;
Excise Group
Data element for Register names
Date
Plant
Basic duty (OP BAL)
Basic duty (CL BAL)
Basic duty (EXAMT)
Extract Indicator
User name
Entry Date
Entered at
Note: -
1. Enter OP BAL, CL BAL and EXAMT all as same as opening balance. For e.g. opening balance for RG23ABED is 1400 then this value is to be entered in all the 3 fields.
2. You have to enter separate line items for all the accounts;
RG23ABED
RG23ASED
RG23AAED
RG23CBED
RG23CSED
RG23CAED
PLABED
PLASED
PLAAED
PLACESS
RG23AECS
RG23CECS
PLAECS
RG23AAT1
RG23CAT1
PLAAT1
3. Enter Date is one day before of the opening. For e.g. if opening date is 01.04.2008 then enter it in 31.03.2008
Then go for J2I5 - Extract and J2I6 - Print Utility
use following
http://help.sap.com/bp_bblibrary/470/Documentation/J33_BPP_32_CHEM_EN_IN.doc
http://help.sap.com/saphelp_erp60_sp/helpdata/en/18/8e113999724854e10000000a11405a/content.htm
Reefer this link for complete Excise transactions
http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
Re: Excise -initial upload
Hopefully this will helpfull to resolve your answer.
Thanks & regards,
Pankaj Mahajan

If I create a new Apple id account with the same bank details for a old Apple id account will I lose my old account?

My daughter has created a Apple Id account with my bank details and I have an Apple id account myself on her phone it's comimg up with "This Device Is Already Associated With an Apple ID. If you turn on Automatic Downloads with your Apple ID, you cannot auto-download or download past purchases with a different Apple ID for 90 days." Does this mean if she presses cancel or transfer will my account be affected in anyway.

I set up FaceTime and Messages on four different devices with only one Apple ID. I used the exact method that is described in the video that AnaMusic has provided to you in the link in her response above. That method worked fine for my family, but you can create new Apple ID's just to use for FaceTime and Messages if you like. Many users prefer doing that as opposed to adding new email addresses.
IMO - using unique email addresses (like in the video) makes sense, because we (my family) all have different email addresses anyway, and it was very simple to add each family members email address to both apps and remove my Apple ID email address as the contact address on each device.
BTW .... if you are using your Apple ID on both devices - your phone number should be the number that is showing in the settings - not you daughter's. Did you set up the Apps with your Apple ID?

How to create a Drop down with values in Module Pool for a screen field.

Hi all,
I have created a Screen on which one field is created Say Bank Name. I would like to give some spcific value for this fileld where user can select only seeing in drop down cann't enter.
Can anyone tell how can we do it ?

Hi,
The selected value key will be stored in the parameter.
eg: Refer below code. Here if i select Vinod then po_name will be 1. After this read i_values WITH this key and get the actual value.
PARAMETERS: po_name(30) TYPE c VISIBLE LENGTH 20 AS LISTBOX.
TYPE-POOLS: VRM.
DATA: i_values TYPE vrm_values,
      wa_values LIKE LINE OF i_values.
AT SELECTION-SCREEN OUTPUT.
wa_values-key = '1'.
wa_values-text = 'Vinod'.
APPEND wa_values TO i_values.
wa_values-key = '2'.
wa_values-text = 'Kumar'.
APPEND wa_values TO i_values.
wa_values-key = '3'.
wa_values-text = 'Reddy'.
APPEND wa_values TO i_values.
CALL FUNCTION 'VRM_SET_VALUES'
       EXPORTING
            id              = 'PO_NAME'
            values          = i_values
       EXCEPTIONS
            id_illegal_name = 1
            OTHERS          = 2.
START-OF-SELECTION.
READ TABLE i_values INTO wa_values WITH KEY key = po_name.
MOVE wa_values-text TO w_name. " This will be ur actual value.
Thanks,
Vinod.
Edited by: Vinod Reddy Vemuru on Jul 8, 2008 4:16 PM

My ipad wont let me buy any thing i have about 26 dollars and it says i need to confirm my account with security questions that i for got is there a way to change them?

i have 26 dollars and want to buy an app for .99 it says i need to answer security questions but i for got the answers am i able to reset those questions or i can't

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

How to convert/move Mail POP accounts *with folders/subfolders* to Gmail for Business?

I currently have several email addresses for my two domains, an Earthlink account (which I will phase out eventually) and a couple of Gmail accounts. They are all POP accounts.
I would like to convert to Gmail for Business, but I can't figure out how to migrate 10s of 1000s of emails that are housed in 200+ folders and subfolders from Mail to Gmail for Business.
The mail migration tools out there don't seem to cover Mac Mail.
Has anyone out there done this?

OK.
From Mail:
Add the new account to Mail. One at a Time copy each folder from the POP account to the Google IMAP account, do not copy more than a few hundred emails at a time, they have to be uploaded to the IMAP server, uploads are slow, it takes a while and tends to fail if there are too many.
Repeat until complete
PS: not just your dull life, the dull lives of everyone who sends an email to you as well, wonder how they would think about that (if you told them)

How do i access my adobe account with the touch screen app for tablets? i do no see a sign in option

see above

Apps and ibooks you should be able to re-download for free, assuming that they are still available in the store and you use the same iTunes account that you originally used to buy/download them : http://support.apple.com/kb/HT2519 . Music bought from iTunes can only currently be re-downloaded if you are in the US, and I assume that you are in Carlisle here in England in which case you won't be able to re-download music.
Have you still got the purchases on your computer, or on a backup that you can copy back onto the computer and then load into iTunes ?

ERROR with CX_SY_ARITHMETIC_OVERFLOW and RAISING clause (for Consolidation)

Hello,
When we run the Consolidation several times on the same data range several times the tool adds the results, so we need to execute in a single package a CLEAR data, the Currency Conversion and the Consolidation.
Our package launches a ScriptLogic with the following code:
*XDIM_MEMBERSET C_ACCT=<all>
*XDIM_MEMBERSET FLOW=<all>
*XDIM_MEMBERSET TIME= %TIME_SET%
*XDIM_MEMBERSET GROUPS= %GROUPS_SET%
*XDIM_MEMBERSET C_CATEGORY=%C_CATEGORY_SET%
*XDIM_MEMBERSET ENTITY=<ALL>
*XDIM_MEMBERSET C_DATASRC = <ALL>
*XDIM_MEMBERSET CECO = <ALL>
*XDIM_MEMBERSET INTCO = <ALL>
*WHEN GROUPS
*IS <>"LC", "EUR"
     *WHEN C_DATASRC
     *IS <>"INPUT","T_MAN"
          //Here, we need an instruction to erase the data
          *REC(FACTOR=-1,
                    TIME="%TIME_SET%",
                    GROUPS="%GROUPS_SET%",
                    C_CATEGORY="%C_CATEGORY_SET%")
     *ENDWHEN
*ENDWHEN
*COMMIT
*INCLUDE FXTRANS.LGF
*INCLUDE CONSOLIDATION.LGF
And when we run the package we get the following error:
An exception with the type CX_SY_ARITHMETIC_OVERFLOW occurred, but was neither handled locally, nor declared in a RAISING clause
Overflow in the operation *
On the one hand, we want to solve the issue and, second, Is it normal that the tool accumulates the results when we run several times the consolidation?
Best regards,
Miguel.

Miguel,
Check if you are running in t o this note..
Note 1355621 - overflow in WriteBack concurrent locking
https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1355621
Summary
Symptom
System exception CX_SY_ARITHMETIC_OVERFLOW throwed. The exception occurs in CL_UJR_WRITE_BACK=>CHECK_CONCURRENT_LOCK.
Other terms
WriteBack, Overflow
Reason and Prerequisites
    This is a program error. The variable(integer) is not large enough to calculate number of all possible combination of dimension members used in one WriteBack data package.
    This Note will increase the variable length to 100 to handle a googol (10E100) of combinations.
Solution
Please apply this Note or upgrade to Support Package.
Header Data
Release Status:     Released for Customer
Released on:     16.07.2009 05:08:14
Master Language:     English
Priority:     Correction with low priority
Category:     Program error
Primary Component:     EPM-BPC-NW-DM-WBV WriteBack Validation
Secondary Components:     EPM-BPC-NW NetWeaver Version
Affected Releases
Software
Component
hope this helps..
Edited by: Vishal Mahawadhi on Dec 10, 2009 10:28 AM

Error in Asset Value carry forward to next year

As a regular periodic process of Month/Year closing activities in SAP, Asset Year 2015 was opened and then closes the year 2014 and carried forward the Asset values to the year 2015. But unfortunately some of the Asset value had not been transferred to the year 2015. As a result, Depreciation had not been charged for those Asset for the year 2015. Need to transfer the Asset value to the current year immediately. Can any one help me regarding the problem ? The APC Start value is showing in the year 2014 but its not showing in 2015.
The Closing value of Current APC of year 2014 does not match with the Opening value of the APC Start, so what should be the possible reasons for that ?

Hi Erika,
I did that on last January 2015. First i use the T-code: AJRW for the Fiscal Year Change and then T-code: AJAB - for Year end-closing Asset Accounting as i did that for last 4 years. Though there was as error message indicating error in depreciation calculation, our consultant assured me that that will not create any problem. The Error was like below:
600981 0 Secretariat Table 2014 Error in dep. calculation

Business Rule Currency Conversion and Carry Forward

Hello Guys,
I have a question related to the Business Rules Currency Conversion and Carry Forward
I configured the business rule "Currency Conversion" and I selected "Apply to Periodic". What this rules does with the flag selected is to get the value of the previous month converted and add the factor (Local Currency previos month - Local Currency Actual month) * Exchange Rate of Current Month
For Example: USD previos month +
This rule applies perfectly from FEB to DEC but if I run it for January, it does not consider the value of USD previos month and LC previous month for calculations so the result I get is:
(and of course it´s because it only applies to periodic)
I need to include into my results this amounts and factor so the question is: Is not a flag I can activate to force the system to act as it does for FEB to DEC periodic ??
I also set up the Business Rule "Carry Forward" so with this rule Im able to bring values converted in USD from DEC to JAN for example from a Data Source Input, but the problem is that it erase any other value I have in other Data Source members and I need to keep that info.
Hope you can come with a suggestion.
Im working with SAP BPC NW 7.5 SP08

Hello guys,
Yes, my fiscal year is from JAN to DEC and Im using a YTD app,
As you mentioned for P&L accounts the rule works fine; but we want to carry forward LEQ accounts. Is there a way to use or configure the currency conversion rule with the flag "Apply to Periodic" to carry forward LEQ accounts for the next following year?
Here is how we configured our Carry Forward Business Rule
Source and Destionation account = 4111
Source and destionation Flow= FCLO
Reverse Sign= False
Data Source Type= ALL
Same Period= False
Apply to Periodic=False
Opening Data Source=DatosBase
Source Data Source = AJ_AC
Regards

Balance carry forward profit center - detailed info

Hello team,
Could you please help me with the request?
Through transaction 2kek, the business does a carry forward of profit center values from a year to the other.
Is there a transaction that allows to check, profit center by profit center, the amounts that have been carried forward, account by account?
thanks for letting me know
regards
Hana

Hi Hana
I am sorry if I end up talking nonsense, But I dont have 2KES access on my system to check before writing this.
You can refer following sap notes, to check if it meets your requirement.
389610
- 2KES: The profit center field is missing in the log
674085
- 2KES Log with profit and loss accounts
I hope with both notes implemented, you should get the desired output.
Hope it is helpful
Regards
Mustafa

Carrying forward accounts with value as '0' (zero) for consolidation

Similar Messages

Maybe you are looking for