Carrying out Physical inventory Specifying A Class items

Dear Team,
Is there any way to Specify the ABC Classification at the time of carrying out Physical inventory for WM.
Apperciate ur inputs.
Regards
Zulfikar

No there is no such option in SAP.

Similar Messages

Carrying out physical inventory count for Consignment stock.

Hello,
Can you please tell me what are the steps for carrying out physical inventory count for Consignment stock provided by vendor?
Sincerely,
Ketan

HI
IN MI01,, select the special stock indicater,, then PI will be created for consignment stock also.
regards,
sudhakar

Not all storage bins in LX16 transaction Carry Out continous inventory

Hello,
I would be please if anybody knows the way of working of transacction LX16. Our client is running this transaction and have the problem that for a warehouse number and storage type, the report not shows all the storage bins that is created and with stock. If we run LX03 transacction, for the same selection we obteins all the storage bins, but if we do the same for LX16 the storage bin is not showed.
Can somebody help us??
Thanks in advance

hi
LX16 transaction is only for " Continious Physical inventory Counting Only"
LX03 is for bin status Report
Take Continuous Inventory
Purpose
With the continuous inventory method, you take inventory for a certain number of storage bins in a storage type. The inventory can take place at any time during the fiscal year.
Continuous inventory has the following advantages over the annual inventory count at the end of the fiscal year:
The effort and costs for the inventory is not concentrated on a certain day or days but is distributed over the entire year. This means that the warehouse supervisor can plan the workforce needed for the workload in the warehouse more accurately.
Inventory can be conducted during slow times in the warehouse, such as during summer vacation periods.
With a reduction in the effort required at the end of the fiscal year, you can respond better to problems that might arise during a year-end closing.
When an inventory is carried out on a continuous basis, up-to-date information about the correspondence between the warehouse stock and the book inventory is always available.
Prerequisites
Inventory methods are defined for each storage type. To define a continuous inventory for a storage type, see Activities ® Physical Inventory ® Define Types per Storage Type in the Warehouse Management section of the Implementation Guide (IMG) documentation.
Process Flow
To run a continuous inventory, you need to complete the following steps in the order displayed:
Plan the inventory by selecting storage bins, for which you want to take inventory.
Create the system inventory record
Activate the system inventory record
Print the warehouse inventory list.
Take physical inventory in the warehouse.
Enter the inventory results
Close the inventory
Process differences in Warehouse Management (WM) and record them in Inventory Management (IM).
hope this helps to solve your issue
regards
KKY

Carry out continuous inventory LX16 when click Actvitatesystem giving error

Hi,
In transaction LX16 when click Activate system giving error message that Quant 3000000017 for storage bin OPEN can not be counted.
Pls replay as soon as possible.
regards
rk

Hi
The inventory counting is based on the storage bin, therefore as you
noticed correctly transaction LX16 will list all materials per bin
independently from additional selection criterias.
Even if you select for only one materials you will still get the
other materials on the bin(s) as well. The only way to get a quant
like inventory counting is to use the cycle counting with transaction
LICC. Please also read the online documentation for this
topic 'CC-inventory on quant level'.
Regards,
Ramana

MM-Physical Inventory

Hi all,
Is it possible to do backdated Physical Inventory for Customer Consignment??
I have tried it however sysyem always compares stock with the current stock and posts the difference ,,,not with reference to the back date i am referring to,,
Experts any suggestion on it??
Refards
Shrinivas

Hi
Please go with following transaction
MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
(After getting Physical inventory document number you go with MIO4)
MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAPu201D Count entered for phys. inv. doc. 100000112"
(After completed above transaction you please go with MI07)
MI07>you will get Post inv.differences: initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button (Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
Physical Inventory:
Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
Physical inventory can be carried out both for a companyu2019s own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documentation creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without special stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transpiration material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
- Physical Inventory document can be printed based on the physical inventory document status and or item status
- Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
- Based on the inventory document printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
- On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
- If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
- Once count is posted in the system, difference analysis can be carried out using transaction MI20
- The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
- The output gives information about the book quantity, Counted quantity, difference in quantity and value.
- From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
- If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
- New inventory document will be created for selected items or for entire document
- The original document items will be deactivated once recount is initiated so original document will not be available for further process.
- On initiating recount, you need to process same as for new count document.
7. Post the difference
- Several options are available for posting difference
- Post difference after count is posted using transaction code MI07
- Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
- Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
some more points for posting difference
- Posting period must be open to post inventory difference.
- The fiscal year is set by specifying a planned count date when creating a physical inventory document.
- Tolerence to crear difference per user group can be set in customization.
- The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
- The movement type in material document will be 701 or 702 based on gain or loss of material.
Serial Numbers in Physical Inventory
If material is managed with serial number then it is possible to carry out physical inventory for material with serial number. There are some pre-requisite before you carry out physical inventory for serialized materials.
- Serial number profile must be maintained in the material master.
- the serialization procedure MMSL (maintaining goods receipt and goods issue documents) has to be assigned to serial number profile.
- The stock check indicator in the serial number profile should be configured.
- Maintain basic settings for the serial numbers in customization for Serial Number Profile.
- Configure serial number management for physical inventory in the Settings for Physical Inventory step in Customizing for Inventory Management.
Blocked Stock Returns are the stock which is return stock from Customer or the stock which can be return back to vendor. To restrict the usage of this stock mostly business do transfer posting for this mateial as BLOCKED stock
Rgds,
Rajesh

How to do Physical inventory process in Warehouse

Hi Guys
What is the procedure for Physical inventory process in Ware house
Kindly provide step by step procedue

Hi
Please go with following transaction
MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
(After getting Physical inventory document number you go with MIO4)
MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAPu201D Count entered for phys. inv. doc. 100000112"
(After completed above transaction you please go with MI07)
MI07>you will get Post inv.differences: initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button (Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
Physical Inventory:
Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
Physical inventory can be carried out both for a companyu2019s own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documentation creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without special stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transpiration material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
- Physical Inventory document can be printed based on the physical inventory document status and or item status
- Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
- Based on the inventory document printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
- On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
- If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
- Once count is posted in the system, difference analysis can be carried out using transaction MI20
- The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
- The output gives information about the book quantity, Counted quantity, difference in quantity and value.
- From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
- If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
- New inventory document will be created for selected items or for entire document
- The original document items will be deactivated once recount is initiated so original document will not be available for further process.
- On initiating recount, you need to process same as for new count document.
7. Post the difference
- Several options are available for posting difference
- Post difference after count is posted using transaction code MI07
- Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
- Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
some more points for posting difference
- Posting period must be open to post inventory difference.
- The fiscal year is set by specifying a planned count date when creating a physical inventory document.
- Tolerence to crear difference per user group can be set in customization.
- The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
- The movement type in material document will be 701 or 702 based on gain or loss of material.
Serial Numbers in Physical Inventory
If material is managed with serial number then it is possible to carry out physical inventory for material with serial number. There are some pre-requisite before you carry out physical inventory for serialized materials.
- Serial number profile must be maintained in the material master.
- the serialization procedure MMSL (maintaining goods receipt and goods issue documents) has to be assigned to serial number profile.
- The stock check indicator in the serial number profile should be configured.
- Maintain basic settings for the serial numbers in customization for Serial Number Profile.
- Configure serial number management for physical inventory in the Settings for Physical Inventory step in Customizing for Inventory Management.
Blocked Stock Returns are the stock which is return stock from Customer or the stock which can be return back to vendor. To restrict the usage of this stock mostly business do transfer posting for this mateial as BLOCKED stock
Goto SPRO -> Sales and Distribution -> Billing -> goto Copy Control -> use Copy control Between billing doc to sales doc.
select the line which refers to ur billing doc and Return Sales doc.
Goto Item level and please check the Check box saying Update Doc Flow .
This check box will keep track of Refernce qty between Billing Doc and Return Sales Doc.
Rgds,
Rajesh

Physical Inventory - need to reverse the posting

Hello Everybody,
We performed a cylce count on work center in a plant. There were 4 numbers that we had to do a recount on. I was unable to enter the recounts. By mistake I posted the document before the changes were made. I tried to cancel the mat doc but was unsuccessful. I need this posting reversed.
Can anyone pls guide me.....?

Hi
Please go with following transaction
MI01>Create physical inventory document>Enter Document Date>Planned count date>Plant Code>Storage Location>Click on Enter button>you will get the separate screen>Enter material code>and click on SAVE button (Ctrl+S)>you will get Physical inventory document number. (MI02-Use for delete)
(After getting Physical inventory document number you go with MIO4)
MI04>click on enter button>you will get "Enter inventory count screen>Enter Phys. inventory doc.no>Fiscal year>Count date>click on enter button>you will get separate screen>Enter physical qty>and click on save button ((Ctrl+S)>you will get massage from the SAPu201D Count entered for phys. inv. doc. 100000112"
(After completed above transaction you please go with MI07)
MI07>you will get Post inv.differences: initial screen>Enter Phys. inventory doc.> Fiscal year> Posting date>click on enter button>you will get separate screen with deference qty>click save button (Ctrl+S)> you will get document number generated from the system (Diffs in phys. inv. doc. 100000112 posted with m. doc. 4900001246)
Physical Inventory:
Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
Physical inventory can be carried out both for a companyu2019s own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documentation creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without special stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transpiration material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
- Physical Inventory document can be printed based on the physical inventory document status and or item status
- Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
- Based on the inventory document printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
- On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
- If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
- Once count is posted in the system, difference analysis can be carried out using transaction MI20
- The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
- The output gives information about the book quantity, Counted quantity, difference in quantity and value.
- From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
- If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
- New inventory document will be created for selected items or for entire document
- The original document items will be deactivated once recount is initiated so original document will not be available for further process.
- On initiating recount, you need to process same as for new count document.
7. Post the difference
- Several options are available for posting difference
- Post difference after count is posted using transaction code MI07
- Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
- Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
some more points for posting difference
- Posting period must be open to post inventory difference.
- The fiscal year is set by specifying a planned count date when creating a physical inventory document.
- Tolerence to crear difference per user group can be set in customization.
- The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
- The movement type in material document will be 701 or 702 based on gain or loss of material.
Serial Numbers in Physical Inventory
If material is managed with serial number then it is possible to carry out physical inventory for material with serial number. There are some pre-requisite before you carry out physical inventory for serialized materials.
- Serial number profile must be maintained in the material master.
- the serialization procedure MMSL (maintaining goods receipt and goods issue documents) has to be assigned to serial number profile.
- The stock check indicator in the serial number profile should be configured.
- Maintain basic settings for the serial numbers in customization for Serial Number Profile.
- Configure serial number management for physical inventory in the Settings for Physical Inventory step in Customizing for Inventory Management.
Blocked Stock Returns are the stock which is return stock from Customer or the stock which can be return back to vendor. To restrict the usage of this stock mostly business do transfer posting for this mateial as BLOCKED stock

PHYSICAL INVENTORY.Urgent.

Hi experts
gud morng to all.
Can anubody explain me..?
1.What is Physical inventory.
2.Why we are doing P.I in company.
2.What is need of Physical inventory in Company.
3.Please explain me overview abt Physical inventory in SAP with T.codes with som examples.
Thanks
sap-mm

Physical Inventory:
Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
Physical inventory can be carried out both for a companys own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documetion creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without spcial stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transporation material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
- Physical Inventory document can be printed based on the physical inventory document status and or item status
- Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
- Based on the inventory doucmen printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
- On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
- If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
- Once count is posted in the sytem, difference analysis can be carried out using trasnaction MI20
- The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
- The output gives information about the book quantity, Counted quantity, difference in quantity and value.
- From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
- If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
- New inventory document will be created for selected items or for entire document
- The original document items will be deactivated once recount is initiated so original document will not be available for further process.
- On initiating recount, you need to process same as for new count document.
7. Post the difference
- Several options are available for posting difference
- Post difference after count is posted using transaction code MI07
- Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
- Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.
some more points for posting difference
- Posting period must be open to post inventory difference.
- The fiscal year is set by specifying a planned count date when creating a physical inventory document.
- Tolerence to crear difference per user group can be set in customization.
- The system will generate material document for the difference qty and post the value to appropriate account (for valuated stock)
- The movement type in material document will be 701 or 702 based on gain or loss of material.

Physical inventory document - for all A parts

Hi,
We are in the process of preparing our system for physical inventory count for all A parts (Cycle count indicator is A).
1. We ran MI24 to get all open physical inventory documents.(they are around 100).
2.Then we ran MI31 (didn't create batch input) for all A parts and the following are checked - 1. Material marked for deletion 2. only materials w/o zero stock 3. Unrestrcited use 4. Blocked 4. Include inventoried materials 5. Included inventoried batches. The variant for MI31 includes all A parts in the material selection and the required plant and SL are input. The output said, phy inventory documents could be created for 656 materials.
3. I wrote a query with MARC and MARD to get all A parts with unrestricted quantity > 0 for the above specified plant and SL. The list produced 882.
The above two counts are not matching.
I ran MI31 for some of the materials which are in the list materials as per point 3 but not in the above 2. But MI31 said, no physical inventory document can be created.
We want to make sure both the both numbers are equal (step 1 + 2 = step 3), to make sure all A parts will be counted. Can anyone explain why they are not matching? or Am I missing something?
OR any other ways to make sure all A parts will be counted. Thanks,
Regards,
Sundar.

Please refer my comment. It may be useful for you.
There are two ways if you want to carry out Physical Inventory count
1)Manual -
First check if there are no open PI document for a material using MI31.
Then carry out three transactions one after another MI01, MI04, MI07
2) Automatic
Maintain CC physical inv. indicator in material master i.e A, B, C
Before that ensure that you have maintained SPRO setting for A, B and C.
Ok Now check the planned count date in MARC table. Run a Z program to change the last count date
Now run MICN and schedule a job to create PI documents

Physical Inventory user guide

Anybody has physical inventory user guide with all transction details ?

Physical Inventory:
Physical Inventory is a business process in which physical stock is matched with book (system) stock. It is legal requirement to carry out physical inventory at least once in a year.
Physical inventory can be carried out both for a companys own stock (Unrestricted, Quality, Blocked Stock) and for special stocks (Customer Consignment stock, Vendor consignment stock from vendor, Returnable packaging). This inventory is carried out saperately for both type of stocks.
Physical Inventory Processes:
Several inventory processes available for physical inventory which includes as follow:
1. Periodic Physical Inventory
o All stocks of the company are physically counted on the balance sheet key date
o Every material must be counted
o Entire warehouse must be blocked for material movements during count.
2. Continuous Physical Inventory
o Stocks are counted continuously during the entire fiscal year.
o It is important to ensure that every material is physically counted at least once during the year.
3. Cycle Counting
o In this method of physical inventory, inventory is counted at regular intervals within a fiscal year.
o These intervals (or cycles) depend on the cycle counting indicator set for the material in Material Master record as CC indicator in plant view data.
o With this Cycle Counting Method of Physical Inventory allows fast-moving items to be counted more frequently than slow-moving items.
4. Inventory Sampling
o Randomly selected stocks of the company are physically counted on the balance sheet key date.
o If found not much variance between the counted stock and the book book stock, it is presumed that the book inventory balances for the other stocks are correct.
Physical Inventory Process Cycle Flow
1. Creation of physical inventory document
- Physical inventory document(s) is created individually or using the batch program, click for more information
- The transaction codes for creation physical inventory are as follow
Individual Inventory documetion creation
MI01 - Individual physical inventory creation
MIS1 - Inventory Sampling document creation
MICN - Cycle count inventory document creation
Collective Inventory document creation
MI31 - Own stock without spcial stock
MIK1 - Vendor consignment
MIQ1 - Project stock
MIM1 - Returnable Transporation material
MIW1 - Customer Consignment stock
MIV1 - Returnable material with customer
MIO1 - Material provided to Vendor (Subcontracting material)
2. Print physical inventory document
- Physical Inventory document can be printed based on the physical inventory document status and or item status
- Transaction code MI21 is used to print the inventory document where print default value can be populated
3. Count the physical stock
- Based on the inventory doucmen printout, the warehouse person will check the stock of material physically and note that on print out. This is completely physical process.
4. Enter count in system
- On completion of physical count, the count result is needs to be entered in the system. This can be with reference (using Tcode MI04) or without reference (using Tcode MI04) to the physical inventory document.
- If count quantity for that material is ZERO then select ZC (zero count) column instead of putting 0 in qty field. If 0 is used for zero count then systm will consider that as "not counted"
5. Analyze difference
- Once count is posted in the sytem, difference analysis can be carried out using trasnaction MI20
- The output gives information based on the input criteria i.e. physical inventory document, plant, material etc.
- The output gives information about the book quantity, Counted quantity, difference in quantity and value.
- From this output list, you can carry out further process ie initiate recount, change count quantity, post difference
6. Initiate recount and follow the steps 3,4,5
- If found unacceptable difference, recount is initiated using directly from difference analysis list (transaction code MI20) or using transaction code MI11.
- New inventory document will be created for selected items or for entire document
- The original document items will be deactivated once recount is initiated so original document will not be available for further process.
- On initiating recount, you need to process same as for new count document.
7. Post the difference
- Several options are available for posting difference
- Post difference after count is posted using transaction code MI07
- Posting the count and inventory differences using transaction code MI08, here you have created physical inventory but not counted so with this you can count and post difference in sinle step.
- Entering the count without a document reference using trasnaction code MI10, with this you can create inventory document, enter the count and post difference in single step.

Physical inventory with CIN

Hi All,
After carrying out physical inventory transactions ex MI01, MI04 and MI07.
Which transaction is to be used to adjust for excise duties -Credit /debit.
With Regards,
Vijaykumar P

Hi,
check J1IH process in following document
[http://wiki.sdn.sap.com/wiki/display/bpxproj/CINUsermanuvalforMM]
Regards
Kailas Ugale

Physical inventory - Last inventory date

Hi,
We carry out physical inventory using LICC. Two parts were counted on previous day, however when a new list was generated to count parts two parts that were counted previously also appeared in this list.
'Old inventory date' field on table LAGP for these two parts did not get updated either.
Please can anyone let me know whey this could be happening ?
Thanks
Mira

I thought the same thing when i checked quant values in LINV and LAGP.
1. I did find more than one quant for the same material.
2. User did not give any values in LICC except range of material (to include all the parts in given warehouse and storage type), warehouse number and storage typ.
Should not this take into account whatever quants there are in the system ?
I am not IM expert and appreciate your quick reply.
Thanks
Mira

Physical inventory block configuration.

Hello,
We have a business requirement to block the bin so that users can not even created deliveries. In the standard system, we have 'posting block' with which you can create an STO, Out bound delivery but can not post the goods.
But here the requirement is users should not be able to create delivery also, if the particular materials are blocked for physical inventory.
How to do this
Regards

Use Xplant matl status functionality and make a key "blocked for delivery" in the plant which is carrying out physical inventory. Or a development is required byputting the logic if there is any posting block on any material in PI doc then system should throw an error message while creating delivery.

Automatic physical inventory

Hi...
I have a requirement to carry out physical inventory every month, the system should inform you that the physical inventroy for this materail is due.
Does SAP provides any such functionality in physical inventory..

Hi,
Try with ABC Analysis for Cycle Counting (Physical Inventory) and follow the link
http://teds02.state.pa.us/eups/Procurement/MIBC_TV0160_1.htm
Regrads,
Biju K

Btach determination during Physical inventory

Hi Gurus,
Just wanted to know that while carrying out Physical Inventory, batches are getting automatically determined when i am creating the document and later viewing it.
Can it be elaborated?
Regards,
SS

SAP searches for any batch for this material in the same storage location that has stock and is not counted in the current fiscal year.
with settings in the selection screen, you can even control to include batches of the same material and storage location that have zero stock
and you can control to include even already counted batches to be counted again.

Carrying out Physical inventory Specifying A Class items

Similar Messages

Maybe you are looking for