Carrying out Transactions on Mobile Device Interface

Hi
We installed IIS and we have checked the AII mobile transactions through WebSAPConsole. It is working fine.
We now want to carry out these transactions through the Intermec IP4 handheld device that we have. What are the things that need to be in place for us to carry out the mobiletransactions on this device? Will I be able to scan an RFID tag and see the UID on the screen? The device is an intelligent device, has Win CE on it.
What are the steps.
I have accss to the pdf: "SAP AII mobile RFID device integration Guide".
Regards
S

Hi Ron
Sorry for coming back after such a long time gap. I am asking a lot of questions here in this message, sorry about that.
I am unable to explain to our device supplier and get the XSLT file for Intermec device. I could not find it online, like other manuals of Intermec. Any idea how I get this file for the IP4 model?
You mentioned i-Browse. Will the XSLT work only if the browser is i-Browse? Will it not work with IE on the handheld? Will the XSLT file require mofications then? Maybe if I had the XSLT, I would not be asking you as many questions.
If we have the XSLT file, are you saying that once the reader trigger is pressed to read a tag, the UID value would appear on the ID text box on the screen? How is this achieved? I would like to understand the architecture here please :- how the tag value gets passed from reader to the handheld to display on the active cursor field.
Regards
Sankar

Similar Messages

SAP AII 5.1 Transactions from Mobile device - Using SAPConsole

Hi Friends ,
1 . From Mobile devices [ SAPConsole enabled ] , can we execute all SAP AII 5.1 transactions ( Like Tag commissioning, decommissiong , Packing ,Loading etc ., ) ?
2. We specifilcally looking for 2DBarcode and Liner barcode not for RFID .So, will it fulfill our needs ?
Please provide some inputs and it would be great if you provide some help links .
Regards.,
V.Rangarajan

Hi Henrik,
Did you find the solution to your problem ?
I'm facing the same issue, so I'd be pleased to know the solution!
Regards
Stekam

Apple Mobile Device Service installation rolls back

Hey there,
I've been having problems installing iTunes 9 or even 8 on my computer. While running the iTunes setup, part of the installation rolls back and when I launch iTunes after that, I get the message saying that
"This iPod cannot be used because the required software is not installed. Run iTunes installer to remove iTunes, then install iTunes again."
However, the installation doesn't work no matter how many times i reinstall it. I've fully uninstalled everything related to apple and used the microsoft's utility to check if they were properly uninstalled before reinstalling itunes, but I still got the same message.
I found out that Apple Mobile Device Service was not installed and that was the problem. When i extracted AppleMobileDeviceService.msi from the iTunes installer and ran it, it rolled back too. So I used the /l*v command to create an installation log and this is the error.
DIFXAPP: INFO: opening HKEY_USERS 'S-1-5-21-4128058654-1677487342-2165978628-1007\Software\Microsoft\Windows\Curr entVersion\DIFxApp\Components\{9AA3828A-F852-11DB-8E29-6C6B55D89593}' (User's SID: 'S-1-5-21-4128058654-1677487342-2165978628-1007') ...
DIFXAPP: INFO: ENTER: DriverPackageInstallW
DIFXAPP: INFO: usbaapl.inf: checking signature with catalog 'C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\USBAAPL.CAT' ...
DIFXAPP: INFO: Driver package 'usbaapl.inf' is WHQL signed.
DIFXAPP: ERROR: Create Driver Store entry failed. (Error code 0x6E: The system cannot open the device or file specified.)
DIFXAPP: INFO: Successfully removed '{9AA3828A-F852-11DB-8E29-6C6B55D89593}' from reference list of driver store entry ''
DIFXAPP: INFO: RETURN: DriverPackageInstallW (0x52)
DIFXAPP: ERROR encountered while installing driver package C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\usbaapl.inf
DIFXAPP: InstallDriverPackages failed with error 0x52
DIFXAPP: RETURN: InstallDriverPackages() 82 (0x52)
Action ended 17:15:17: InstallFinalize. Return value 3.
Can anyone help me please? Any help will be appreciated =P
Cheers

I have recently been fighting my system to get itunes to recognise my iphone and i ran into a similar problem.
I couldnt uninstall the old version of apple mobile device support, and installing the new itunes over the top did not seem to help either.
But i found a work around.
Try opening the itunes.exe install package with winrar. (www.winrar.com, its a free program) and then extracting only the applemobiledevicesupport.exe file.
Reboot your system, run that file and then reboot again.
It should work.
If it doesnt, then good luck to you :P
-Adam

Apple mobile device support wont install on windows 7

while trying to install itunes 11.04 it encounted an error i finally worked out that apple mobile device support is not intalling i have tired to install it separtely but it just keeps rolling back near the end of the install just cant work out what the issue is please help

Can anyone help?? Please???

Error at end of installation Service (Apple Mobile Device) failed to start - help

Hi, I'm trying to downloade iTunes onto my laptop and keep receiving the error "Service (Apple Mobile Device) failed to start. Verify that you have suffficient privileges to start system services"
Can anyone help please?

Hello redanne,
The following article provides information that can help sort out the Apple Mobile Device service.
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Cheers,
Allen

HT1414 In updating my iTunes,I got a message "Service Apple Mobile Device failed to start. verify that you have sufficent priviliges to start system services". Cant figure out what to do

In updating my iTunes,I got a message "Service Apple Mobile Device failed to start. verify that you have sufficent priviliges to start system services". Cant figure out what to do

So many people are having this problem! Doehunter's instructions here worked for me! Hope this helps. https://discussions.apple.com/message/23824640#23824640

Hi - a new and confusing message when I try to connect my iphone with itunes on my laptop: "this iphone cannot be used because the Apple Mobile Device Service is not started". Any idea of my way out of this cul-de-sac?? Brian

Hi, I'm getting a new and confusing message when I connect my Ipad/phone to my laptop: "This iphone cannot be used because the Apple Mobile Device Service is not started" ... any idea, anyone, how I get out of this cul-de-sac. Brian

try this http://melchoi.wordpress.com/tag/this-iphone-cannot-be-used-because-the-apple-mo bile-device-service-is-not-started/
Hope it's gonna help

How mobile device ( rfid/barcode reader) communicates with SAP transaction.

Dear Friends !
Good morning, How are you ?
I want to understand that in ITSmobile How Mobile device ( RFID Reader ot Barcode scanner/reader) to fetch the data and supply the ITS screen.
I believe every mobile device has some .dll file or something in that we have some methods if we call it say in .net or java application we can read the rfid or barcode and from the returning paramter of the .dll method we can get information what we want ( if i m not wrong).
now the question is if I have some barcode /rfid number which is assigned to sap material number. if on mobile device I run mm02 transaction code n trigger the gun can I get the material number in material number field . ( assume I have program which can fetch the material number from barcode/rfid number.) ? but to pass rfid number / barcode what should I do. I can write javascript and call that method but dont know weather I can use javascript or not in that.
to be simple:
How can I get barcode / rfid number to my sap transaction. if possible
please give me any suggestion. document link... help.... whatever may help me to understand this. I will greatly appreciate your reply
Thanking you
Regards
Naeem

Hi Ajay,
Please refer to note 1057759 for the delivered Drivers for Peripherals in SAP DOE. This lists all the supported barcode scanners for SAP Netweaver Mobile. Those derivers are certified after testing to work only with that device and OS configuration.
The Javadoc to get an idea about how to use those PIOS API for barcode scanner
http://help.sap.com/javadocs/nwmobile/SP3/laptops/com/sap/ip/me/api/pios/scanner/ScannerConnection.html
As input from Barcode scan have to be taken in Wedge Mode, there is no need to do any developments in MI JSP Application. To enable barcode scan one can download barcode scan tools available from Handheld Vendor sites
Regards,
Amith

How can I carry a Xcelsius Dashboards on mobile devices?

Hi Everybody !!
On my company we like to do Dasboards with Xcelsius, but then the intention is to carry dasboards to mobile devices,
Somebody know or have something about this functionality?
I appreciate your help!!
Best Regards
Monica

Hi Monica,
not sure if this this tool supports Xcelsius Dashboards, but take a look at SAP BusinessObjects Mobile:
[http://www.sap.com/solutions/sapbusinessobjects/large/business-intelligence/information-infrastructure/enterprise/mobile/index.epx|http://www.sap.com/solutions/sapbusinessobjects/large/business-intelligence/information-infrastructure/enterprise/mobile/index.epx]
Also this thread about Xcelsius + iPhone:
How to publish dashboards on iphone
Regards
Victor

Can't install new itunes upgrade on Windows 7. Keep getting Apple Mobile Device Service timed out

Ever since the new upgrade of iTunes came out I can no longer open iTunes. I have uninstalled and reinstalled numerous times to no avail. I keep getting the Apple Mobile Device Service warning that it timed out. I go into Services and I can't start the mobile device there either. I have followed every suggestion online and still can't get it to work.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Not all storage bins in LX16 transaction Carry Out continous inventory

Hello,
I would be please if anybody knows the way of working of transacction LX16. Our client is running this transaction and have the problem that for a warehouse number and storage type, the report not shows all the storage bins that is created and with stock. If we run LX03 transacction, for the same selection we obteins all the storage bins, but if we do the same for LX16 the storage bin is not showed.
Can somebody help us??
Thanks in advance

hi
LX16 transaction is only for " Continious Physical inventory Counting Only"
LX03 is for bin status Report
Take Continuous Inventory
Purpose
With the continuous inventory method, you take inventory for a certain number of storage bins in a storage type. The inventory can take place at any time during the fiscal year.
Continuous inventory has the following advantages over the annual inventory count at the end of the fiscal year:
The effort and costs for the inventory is not concentrated on a certain day or days but is distributed over the entire year. This means that the warehouse supervisor can plan the workforce needed for the workload in the warehouse more accurately.
Inventory can be conducted during slow times in the warehouse, such as during summer vacation periods.
With a reduction in the effort required at the end of the fiscal year, you can respond better to problems that might arise during a year-end closing.
When an inventory is carried out on a continuous basis, up-to-date information about the correspondence between the warehouse stock and the book inventory is always available.
Prerequisites
Inventory methods are defined for each storage type. To define a continuous inventory for a storage type, see Activities ® Physical Inventory ® Define Types per Storage Type in the Warehouse Management section of the Implementation Guide (IMG) documentation.
Process Flow
To run a continuous inventory, you need to complete the following steps in the order displayed:
Plan the inventory by selecting storage bins, for which you want to take inventory.
Create the system inventory record
Activate the system inventory record
Print the warehouse inventory list.
Take physical inventory in the warehouse.
Enter the inventory results
Close the inventory
Process differences in Warehouse Management (WM) and record them in Inventory Management (IM).
hope this helps to solve your issue
regards
KKY

Installing 10.4.10 and cannot install Mobile Device Support. I have followed the documentation at the support pages and have totally cleaned out Apple software so that I could do a total clean "new" install. Still no success. Any suggestions?

In trying to install iTunes 10.4.1.10 I could not get Apple Mobile Device Support to work. Following Apple support (docs Ht1923 ?71926 + TS1538 et al) cleaned out all Apple software for a "new" install. Still can not get Mobile Device Support to install. What am I missing?

See also Troubleshooting issues with iTunes for Windows updates if you haven't already done so.
After uninstalling iTunes and the related components it is useful to physically delete any files that may remain in the specified locations before attempting to reinstall.
If that still doesn't work you could try downloading 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). AMDS might not install right now, but you may get a more useful error message as to why not, and you might be able to run iTunes even if you can't update your devices at this stage.
Make sure you download a fresh copy of the installer as it was updated some time after the initial release.
tt2

Why are the buttons faded out (cant use them) on mobile device details?

Good Afternoon
I am having a little trouble figuring out why the buttons are faded (cant use them) on the: User Mailbox -> Mailbox features -> Mobile Device Details. Any help would be appreciated. Thanks.

Hi Andy
This option is greyed out only for one user or its for all users ?
Do you have any MDM in place for managing the active sync devices ?
Have you tried disabling this feature through Powershell ?
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

I have windows 7I have downloaded most updates and use no mobile devices just use itunes my pc. what programs can I eleminate as I'm running out of memory?

What itunes/sony programs can I elimnate from my pc if I only use it on my pc? I have no mobile devices and afraid Im have sony, safari browser and other programs on my computer. I routinely down loaded all updates and afraid I have many uneeded programs and also have problems of running out of memory, can somebody help

Thank you for your quick response, BalusC. I really appreciate your answer.
Yes, you are right. If I manually code the same amount of those components in the JSF pages instead of generating them dynamically, the server will still run out of memory. That is to say, JSF pages might not accommodate a great deal of concurrent visiting. If I upgrade the server to just allow 1,000 teachers making their own test papers at the same time, but when over 2,000 students take the same questionnaire simultaneously, the server will need another upgrading. So I have to do what you have told me, using JS+DOM instead of upgrading the server endlessly.
Best Regards, Ailsa

I can not start my apple mobile device. the computer will attempt to start it up but then bumps me out. I have tried everything.

I can not start my apple mobile device. It will attempt to start and then bump my out. I think I need a third party and I do not know how to get a third party of to start the apple mobile device. I have looked online at people who had the same problem as me and tried to do what they did to get it started. I am still not able to get it started and I have been working on this for three day. please help if you can

See this article for instructions on restarting and re-installing the Apple Mobile Device service if necessary.
How to restart the Apple Mobile Device Service (AMDS) on Windows
B-rock

Carrying out Transactions on Mobile Device Interface

Similar Messages

Maybe you are looking for