Cartiage Problem-on​e or more cartiages are missing or damaged

Officejet 6600
I unpluged the printer briefly.  After I plugged the printer back in I began receiving the following.
X Cartridge Problem
Until Cartridges are installed, make sure the printer is turned on to avoid damage to the printer.  One or more cartridges are missing or damaged.
I pressed the OK button and it would cycle and go back to the above screne.  Also, on the main scene in the upper right corner there are 4 droplets, each representing each color.  Above the second from the right (Yellow), there is a yellow triangle sign with a !.
I have replaced the cartridges and still have the problem.

Hi @prince041181 
I'd like to help you with your Officejet 6600. Please complete the troubleshooting steps presented in the following document; A 'Cartridge Problem,' 'Ink Cartridge Failure,' or 'Incompatible Ink Cartridges' Error Message Displ....
If the issue persists, I suggest calling us. Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. We will, at our option, either replace products under warranty that prove to be defective or refund the purchase price.
We could even determine after troubleshooting that it is a problem with the printer, in which case they may offer you a discount on a newer model.
The number to call is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

  • I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1

    I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!

    As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system.  I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).

  • Home Sharing Problem: Import Button & "Show" Dropdown menu are missing?

    Hi Everyone,
    My wife and I are both running iTunes on Macbook Pros and we are both logged into eachother's iTunes libraries through Home Sharing accounts. However, the Import button on the bottom has disappeared, so has the "Show" dropdown menu that is typically to the left of the Import button on the bottom of the screen when you are in the other person's Music Library. The Show dropdown memu typically displays the options: All and Not in Library. We can play and listen to each other's music, however we can't Import songs. Can anyone help me troubleshoot this problem??
    Thanks,
    Patrick

    To clarify as I have this problem repeatedly here is the description and the cure.
    Sharing is enabled in the sharing tab.  Other computers can see this computers library but cannot import.  The icon for the home sharing doesn't show the "house" - it just shows some musical notes.
    This means that home sharing is not enabled.  JUST SHARING.
    In Itunes 11 use: File/Menu/Home Sharing/Turn on Home sharing.
    But you are not done.
    When home sharing shows up now in the left panel - click it. The right panel will present a sign on for your apple ID.  Sign on and enable home sharing.
    Then you will be able to import form the target computer again.
    It gets disabled with OS upgrades and sometimes with iTunes updates.

  • Problem with infoset/query: Some data are missing

    hi all,
    i created an infoset and a query with tables AGR_AGRS (composite/single roles) and AGR_TCODES (tcodes in roles)with SQ01/02.
    Problem is that some roles without tcodes dont appear in the report(no data in AGR_TCODES)
    I tried to change properties of joints in SQ02 (external) but it doesnt work..
    Any idea? Let me know if you need further info,
    julien

    Hi Sujay,
    My infoset is built like this:
    agr_define_____________agr_agrs___________________agr_texts
    .............................................. |_______________________agr_tcodes____________________agr_texts
    I tried to change  agr_define_____________agr_agrs and agr_agrs_____________agr_tcodes using left inner joing but no result.
    I appreciate your help,
    Julien
    Edited by: JULIEN LEGAL on Aug 16, 2010 9:47 AM

  • One or more Object are missing in the User Role

    How to assign/add Objects to the User Role?
    Thank you in advance

    I dont understand exactly what you want to say...r u talking about how to generates roles..
    Pls visit the PFCG transaction enter the role name
    now goto change mode and maitain the values..or the object..
    From the SAP menu you can switch on the technical names for ur reference.
    Regards
    Prakhar

  • Loading assemblies using Reflection when dependant dlls are missing.

    Hello All,
    I've created a sample WinForms application where I upload a dll (present in my local machine).
    I just need to read the public types (classes) defined in the assembly. So I've used the ExportedTypes property.
    When the dependant dlls are present in my machine, I'm able to read the public types of the assembly using the ExportedTypes property.But when the dependant dlls are not available in my machine, I get the following error:
    "Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information."
    Please let me know how to overcome this problem even when the dependant dlls are missing.
    NOTE: When the same dll, is looked upon using  ILDASM.exe we are able to view its classes, even when the dependant dlls are not present.
    Thanks, Satish Bommideni "Success usually comes to those who are too busy to be looking for it."

    Hi Darin,
    Thanks again.!!
    I'm having trouble reading a COM dll.
    I'm using following code  and using the LoadTypeLib method to fetch the dlls ITypeLib.
    [DllImport("oleaut32.dll", CharSet = CharSet.Unicode, PreserveSig = false)]
            static extern ITypeLib LoadTypeLib(string szFile);
    I'm able to get the classes/ProgIds. But I need to fetch only those classes which implement a particular interface. I tried using the following code to fetch the implemented interface, but its not successful for the case where multiple classes implementing
    that interface
    var typeLibrary = LoadTypeLib(openFileDialog1.FileName);
    int typeCount = typeLibrary.GetTypeInfoCount();
    for (int i = 0; i < typeCount; i++)
    System.Runtime.InteropServices.ComTypes.TYPEKIND TKind;
    System.Runtime.InteropServices.ComTypes.IMPLTYPEFLAGS implInterface;
    typeLibrary.GetTypeInfoType(i, out TKind);
    if (TKind == System.Runtime.InteropServices.ComTypes.TYPEKIND.TKIND_COCLASS)
    Type objType = typeLibrary.GetType();
    Type objInterface = objType.GetInterface("IMyInterface", true);
    try
     obj.GetImplTypeFlags(i, out Interfa);
    Thanks, Satish Bommideni "Success usually comes to those who are too busy to be looking for it."

  • Customer Master Data attributes are missing in BW when populated in R3?

    Hi,
    We have got a problem like - Customer Master Data attributes are missing in Business Warehouse when populated in R3.
    <b>Eg.</b>
    Account Number: 1081202 - No customer clasification. In BW it is not assigned.
    Account Number: 2023902 - In BW region field is not assigned, In R3 it shows SA.
    No customer clasification, in R3 it shows OP.
    How do we check & resolve this problem.

    Hi Venkata,
    Its a master data.
    How will the PSA come into picture.
    Its directly loaded into the characteristic. no PSA is used in between.
    We need to run manually the hierarchy/attribute change run?
    Please give the steps for running it manually.
    <b>Shabar Alibhai:</b> I dont have the sufficient R/3 authorisations for checking the data in r/3 side.
    The problem needs to be identified with respect to BW side only.
    Thanks & Regards

  • "One or more pages are in use and could not be deleted" - AGAIN.

    Open a PDF file.
    Save it under a different name
    Try to delete a page
    You'll get this error:
    "One or more pages are in use and could not be deleted"
    I've had this billions of times now and the only solution that works 100% of the time is closing and re-opening the file. This leads me to believe it's something with "locking" the file while saving, but not unlocking it after done saving.
    GET THIS FIXED PLEASE because it's annoying LOADS and LOADS of people.
    As evident by the 7000+ search results for the exact phrase "One or more pages are in use and could not be deleted".
    And that's just the part of the userbase that actually reports the problem.
    There are several topics about this issue, some marked as "solved" erroneously.
    Note, I'm a paying customer, use Photoshop/Illustrator/Dreamweaver/Fireworks and Bridge during my daily work, and have had this issue for months and months across several different computers (two different workplaces, and at home) and have ran into this time and again, when all I want to do is cut a PDF into several smaller PDFs.
    Closing and re-opening your program because you're unable to fix this issue is NOT ACCEPTABLE. It's THE WORST kind of user experience, as this issue is the ONLY reason I use Acrobat at all, and it can't even do that.
    Cheers,
    - Dirk
    Ps.: Sorry, I'm very frustrated running into this time and again, and then having to wade through thick mud (your site is a UX nightmare) to report this issue, which has been report oodles of times on this board before.

    Yup.  I get this problem too.  And I'm posting in April of 2015, so I see this problem has existed a long time.  Acrobat "Pro" (ha ha) is full of stupid, annoying problems.  And the interface is clunky.  I'm going use PDF Split and Merge to remove the page I'm struggling with.  Ridiculous that Adobe Acrobat Pro cannot remove one page from a PDF file.  I am NEVER upgrading this product.  I am done with Adobe.

  • Firefox not responding, seems like other browser is hijacking inquiry, will not let me reset, states cannot reset because one or more windows are open

    when i type in a search, firefox says it's not responding. Although firefox still showing not responding I am taken to websites that I did not request. I tried to reset firefox but it said there is a problem because one or more windows tabs are open even though they are not.
    What is cloudnet? just one of the items that pops up on the bottom right of the screen during my search

    Getting redirected to unwanted websites can be caused by an add-on, or by external malware, or by a change to your connection settings.
    (1) Check Extensions
    (A) In Firefox:
    Try disabling ALL nonessential or unrecognized extensions on the Add-ons page. Either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Extensions. Then, if in doubt, disable. Or if it's clearly crap, remove.
    Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
    (B) In the Windows Control Panel
    If there is no remove button on the Add-ons page, typically the extension was installed externally and can be removed through the Windows Control Panel, Uninstall a Program.
    If you click the "Installed on" column heading to group the entries by date, you may find some undisclosed bundle items that snuck in with some free software. Take out as much trash as possible.
    (2) Malware scans
    Our support article lists free tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]]. If you notice a pattern of search engine result links being diverted to unrelated pages, this can be a stubborn infection involving a rootkit, so try the TDSS Killer first.
    (3) Connection settings
    Normally Firefox piggybacks on your IE connection settings. You can change that (or malware might have changed it). To view and modify:
    "3-bar" menu button (or Tools menu) > Options > Advanced > Network mini-tab > "Settings" button
    Change to "No proxy" and see whether that makes any difference.

  • When I try to delete page(s) from a PDF document I created, I geth the following message: "One or more pages are in use and could not be deleted." Any suggestions?

    When I try to delete page(s) from a PDF document I created, I geth the following message: "One or more pages are in use and could not be deleted." Any suggestions?

    I sent an email to TerraGo Support and they sent the following response: "This has bug has been discovered and our development team is quickly creating a patch to resolve the problem. The patch should be available within a week or two. For your reference, the bug number assigned to this case is: 3620. Check back in about two weeks and hopefully the patch will be available. Again, I apologize for the inconvenience."

  • [HELP] Conky: one or more $endif's are missing

    Hello
    Today, I tried to custom a conkyrc file found in the web.
    I've at least one syntax problem when I try to start conky:
    [evasivefr@desktop ~]$ conky
    Conky: one or more $endif's are missing
    Conky: desktop window (120002e) is subwindow of root window (1a7)
    Conky: window type - override
    Conky: drawing to created window (0x2800001)
    Conky: drawing to double buffer
    I don't know really what I've done which cause this problem, can you help me please ?
    Here is my conkyrc:
    # Use Xft?
    use_xft yes
    xftfont DejaVu Sans:size=9
    xftalpha 0.9
    text_buffer_size 2048
    # Update interval in seconds
    update_interval 1
    # This is the number of times Conky will update before quitting.
    # Set to zero to run forever.
    total_run_times 0
    # Create own window instead of using desktop (required in nautilus)
    own_window yes
    own_window_transparent yes
    own_window_type override
    #own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
    # Use double buffering (reduces flicker, may not work for everyone)
    double_buffer yes
    # Minimum size of text area
    minimum_size 180 0
    #maximum_width 250
    # Draw shades?
    draw_shades no
    # Draw outlines?
    draw_outline no
    # Draw borders around text
    draw_borders no
    # Stippled borders?
    stippled_borders 0
    # border margins
    border_margin 5
    # border width
    border_width 1
    # Default colors and also border colors
    default_color white
    #default_shade_color black
    #default_outline_color white
    own_window_colour white
    # Text alignment, other possible values are commented
    #alignment top_left
    alignment top_right
    #alignment bottom_left
    #alignment bottom_right
    # Gap between borders of screen and text
    # same thing as passing -x at command line
    gap_x 35
    gap_y 50
    # Subtract file system buffers from used memory?
    no_buffers yes
    # set to yes if you want all text to be in uppercase
    uppercase no
    # number of cpu samples to average
    # set to 1 to disable averaging
    cpu_avg_samples 4
    # number of net samples to average
    # set to 1 to disable averaging
    net_avg_samples 2
    # Force UTF8? note that UTF8 support required XFT
    override_utf8_locale yes
    # Add spaces to keep things from moving about?  This only affects certain objects.
    use_spacer none
    TEXT
    TIME ${hr 2}
    ${alignc 35}${font Arial Black:size=20}${time %H:%M}${font}
    SYSTEM ${hr 2}
    Kernel  ${alignr}${kernel}
    RAM ${alignr}$memperc%
    CPU Freq ${alignr}${freq} Mhz
    CPU1 - ${cpu cpu1}% ${alignr}CPU2 - ${cpu cpu2}%
    CPU3 - ${cpu cpu3}% ${alignr}CPU4 - ${cpu cpu4}%
    Uptime ${alignr}${uptime}
    STORAGE ${hr 2}
    ${voffset -5}Home:
    ${voffset 4}${fs_free /home}/${fs_size /home} ${alignr}${fs_bar 9,60 /home}
    ${voffset -5}Data:
    ${voffset 4}${fs_free /mnt/data}/${fs_size /mnt/data} ${alignr}${fs_bar 9,60 /mnt/data}
    NETWORK ${hr 2}
    ${if_existing /proc/net/route eth0}
    ${voffset -6} Up ${alignr}${upspeed eth0} kb/s
    ${voffset 4} Down ${alignr}${downspeed eth0} kb/s
    ${voffset 4} Upload ${alignr}${totalup eth0}
    ${voffset 4} Download ${alignr}${totaldown eth0}
    ${voffset 4} Local Ip ${alignr}${addr eth0}
    ${voffset 4} Public Ip ${alignr}${execi 3600 /home/evasivefr/.scripts/conky/myip.sh}
    ${else}${if_existing /proc/net/route eth1}
    ${voffset -6} Up ${alignr}${upspeed eth1} kb/s
    ${voffset 4} Down ${alignr}${downspeed eth1} kb/s
    ${voffset 4} Upload ${alignr}${totalup eth1}
    ${voffset 4} Download ${alignr}${totaldown eth1}
    ${voffset 4} Local Ip ${alignr}${addr eth1}
    ${voffset 4} Public Ip ${alignr}${execi 3600 /home/evasivefr/.scripts/conky/myip.sh}
    ${endif}${else}${if_existing /proc/net/route wlan0}
    ${voffset -6} Up ${alignr}${upspeed wlan0} kb/s
    ${voffset 4} Down ${alignr}${downspeed wlan0} kb/s
    ${voffset 4} Upload ${alignr}${totalup wlan0}
    ${voffset 4} Download ${alignr}${totaldown wlan0}
    ${voffset 4} Signal ${alignr}${wireless_link_qual wlan0}%
    ${voffset 4} Local Ip ${alignr}${addr wlan0}
    ${voffset 4} Public Ip ${alignr}${execi 3600 /home/evasivefr/.scripts/conky/myip.sh}
    ${endif}${else}
    Network Unavailable
    ${endif}
    TEMP ${hr 2}
    M/B - ${platform f71882fg.2560 temp 2} .0°C ${alignr}GPU - ${exec nvidia-settings -q gpucoretemp | grep '):' | awk '{print $4}'}0 °C
    CPU1 - ${platform coretemp.0 temp 1} .0°C ${alignr}CPU2 - ${platform coretemp.1 temp 1} .0°C
    CPU3 - ${platform coretemp.2 temp 1} .0°C ${alignr}CPU4 - ${platform coretemp.3 temp 1} .0°C
    COOLING ${hr 2}
    CPU1: ${platform f71882fg.2560 fan 1} RPM ${alignr}CPU2: ${platform f71882fg.2560 fan 2} RPM
    Thanks !
    PS: If you see any others errors (syntax, or other) please tell me

    Just in playing with it, I added an extra ${endif} at the end of the network section and the error went away.   Since I only have one network connection, I don't know if it breaks something else or not.

  • HELP!!!  Message - (One or more applications are using the iTunes scripting interface. Are you sure you want to quit?)  How do I get this to stop?

    I bought a new Sony Vaio Laptop running Windows 8, 64bit, i7 processor.  Everytime I open iTunes and then close out, the following message occurs: (i-tunes message - One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) Then it starts counting down from 20 seconds unless I just click on the (Quit) button.  How do I get this to stop?  Please be specific, I am challenged when it comes down to computers.
    Thank You

    This was extremely annoying for me, also.  I started uninstalling unneeded Sony applications to try to narrow down the problem.  It turned out not to be a Sony application... it is some functionality built into the bluetooth driver software package by Broadcom.  Uninstalling the bluetooth package (via the control panel) takes care of the problem.  Itunes also boots up way quicker.  But uninstalling it will remove features related to bluetooth and nfc.   For me, that isn't an issue, since I don't use them.  Since you said you're "computer challenged" I would probably just send an email to sony complaining about the problem.  They'll get in touch with Broadcom eventually (the manufacture of the drivers) and get the problem fixed.
    Side note: the Broadcom package is huge...  nearly 1GB in size.  Which is crazy.  I can't imagine what it does considering the size of it.  Entire operating systems can take up less storage.  Also, I have no idea how it starts an itunes plugin without placing it into the standard plugin directories.

  • Solaris 10 wont install - One or more disks are found

    Hi,
    Hi I am new to installing Solaris on a E450 server.
    I place the cdrom and type boot cdrom
    Answering questions about network region etc.
    The installer starts the installation and comes with an error:
    One or more disks are found, but one of the
    following problems exists:
    > Hardware failure
    > Unformatted disk.
    So no installation.
    How do I solve this?
    I have tried different disks and even to format the disks.
    I have had FreeBSD running on this system without any problem.

    The solution:
    If you���re trying to install Solaris (SPARC) on a disc which previously had another O/S (*BSD) on it, you will more then likely come across the following error after the system identification stage is complete:
    One or more disks are found, but one of the following problems exists:
    > Hardware failure
    > Unformatted disk.
    The problem is to do with the disc label, at the shell fireup format with the e switch
    format -e
    select the disc which you are trying to install onto, if you are told that the disc doesnt not contain a disk label, would you like to write a lablel, say yes & specify the type as SMI Label, If youre not asked about the label & presented with a menu, goto the partition section, choose label, specify the type as SMI.
    quit & reboot & all should be well

  • Adobe standard 9 "one or more pages are in use and could not be deleted"

    I am an experience user from 4 to now 9 standard.  At work when extracting pages from a block scan I keep getting "one or more pages are in use and could not be deleted" it does not extract the pages but deletes some and leave some in the master document.  This happens on a regular basis and is so frustrating when trying to split a block document into individual ones. This is on adobe 9 professional... Process is 3500 pages document, open up the page tab to see the pages. Highlight the first and last page of the document you want to extract. Right click and select extract, tick the box delete after extracting.  Some times it works and a lot of the time I get the error above.  I have google’d this error and there seems to be no feedback to cover the reason as to why it creates this error and what does it mean?
    Thanks

    I use this feature once a month to extract / delete some 200 pages from an 800 page file. I found the release notes for 10.1.4 stated that this issue was fixed. I updated my Acrobat to the 10.1.4 release and i was still having the problem. I finally fixed it by disabling the Win XP compatability feature that i had enabled in the properties of the Acrobat executable. I had enabled this feature a couple of months ago as a fix to this specific problem, now it's not necessary.
    Environ: Win 7 32-bit and Acrobat X, 10.1.4.

  • DVD 6.0.3 problems--- Is this what other folks are experiencing?

    Up until recently, I've had absolutely no problems burning DVDs w/iDVD and now suddenly, it's not working. It goes through the entire process and then says there were errors burning to DVD. The DVD appears blank.
    Reading through the posts, it sounds like I am not alone. However, I think I may have narrowed the problem down and wonder if this is what others are experiencing.
    If you use a Theme 6.0 menu and click to see the menu tree, are you getting those little caution signs, saying "Menu has empty drop zones"?
    Oddly, this error message appears for more menus using the first theme than say, the Watercolor theme.
    When I search under "Project Info", the project duration length appears right and the Media scrollable list looks good, however the Track Bar shows nothing. Clicking between Best Performance and Best Quality changes the amount of data for the DVD Capacity bar, but still nothing on the Track bar.
    Burning a disc image from iMovie seems to work and burning movies directly through Toast is also working, leading me to believe it's an iDVD problem.
    So... is this what others are experiencing? And, even more importantly, are there any solutions/workarounds?
    I have tried reinstalling iDVD 6.0.3

    Burning a disc image from iMovie seems to work ....
    you can only burn a disc image thru iDVD (from the file menu).
    Click Here
    you cannot burn a disc image thru iMovie however you can back up an iMovie project to DVD-R media.
    The two are vastly different (the latter won't play in a standard set top dvd player).

Maybe you are looking for