Cartoon filter turning footage black when in full quality

Cartoon filter works fine when in lower qualities but when comp is full quality footage goes black??
Running:
Mac OSX 10.9
2.8GHz Intel Core i7
8GB Ram
Graphics AMD Radeon HD 6770M 512 MB

What exact version of CS6 are you using? 11.0.0? 11.0.1? 11.0.2? 11.0.3?
When you say it "goes black" do you mean the whole comp is completely black or does it just get mostly black with some color in spots?

Similar Messages

N8 Display turns totally black when incoming call ...

My N8's display always turns totally black when there is an incoming call, or even when the
alarm rings. Before can see the caller's name and answer the call, I have to disable the screen's "keylock".
I tried to find a point in the phone settings wher I can avoid this, but didn't find any. Is anybody out there to give me a hint ?
Thanx in advance

When I am inside, the screen acts normally: it goes black when held close to face. It returns to normal as soon as taken from my face. However, the screen also goes black if I am outside in daytime when I have an incoming call, and when I make calls also, as soon as I press the green call button. It "thinks" it is near my face. If I slide the button on the right side of the phone down twice, the screen lights back up normally but the touch screen will not function. At that point I cannot answer the phone, or if I'm already making a call I cannot hang up nor press the speaker phone button.
There is nothing over the face of the phone. I removed the protective plastic cover but that did not help.
This seems to occur only when I am outside in the sunlight, so it has something to do with a sensor, either light or heat.
I am aware that this problem has occurred on other N8s. I have not found any solutions for it. Perhaps it is not a problem on every N8. I updated the software last week to 111.040.1511 Symbian Belle. That software date is from 2012-07-28.

TIF thumbnails initially populate, but turn 80% black when I "Open With PS"

I'm scanning photographs with a relatively-new Epson 10000XL scanner. I save the scans as ~300MB TIFs, copy the entire folder, then crop the copies with Photoshop CS5 12.0.3 on a Win XP 2.2GHz Pentium Dual Core CPU with 3.25GB RAM. The crop goes fine and the the save seems to go fine. Filesize of all cropped files is consistent. A few days later, I notice the image is 80-90% black, with only the top strip OK. This happens to about 15% of the images I've scanned. The original scans are always OK, so I think I can rule out the scanner. The cropped image thumbnails look good in Bridge, but when I right click and "Open with PS", the thumbnail turns 80% black and an 80% black TIF shows up in Photoshop...baffling. Sometimes half the image is black, but usually it is mostly black. Always, it is the bottom area of the image that is black. I can rescan and recrop the image, but a 15% rescan rate at 6-7 min/scan is killing me. What the devil is causing this? Is this a hardware issue, and if so, is it a RAM deficiency? Defective RAM? Defective hard drive? Conflicting software? Whimpy graphics card? Something else?

Replies to Curt and Omke:
In original post you said you were running Win XP, so it that home computer and work is Win7?
Work PC = Win XP, Photoshop CS5, Dual-core processor and 4 GB RAM. Home PC = Win7, Photoshop 5.0, Quad-core processor and 4GB RAM. Both are 32-bit OS. I cropped and saved 20 of these TIFs on the home Win7 machine, and had no problems with black images at any time. I tested those same TIFs on a work machine that is identical to my Win XP work machine, and had lots of problems with them turning black. This suggests that the OS, video card and/or CPU are causing trouble on the work machine, not necessarily the RAM. It doens't seem to be a problem unique to my PC, but rather to all the PCs that are just like my PC (our organization buys in bulk, and we all have identical PC setups).
Most likely it is the RAM. With a 64 bit machine you are really handicapping yourself with 4 gigs. You also need a good deal of space on the scratch disk, so make sure you have ample free space.
I have 62GB out of 150GB free on C drive, but it’s fragmented. Will try defragmenting to see if that helps. I think, with my 32-bit Win XP, I am limited to 4GB, right? Does a 64-bit system have that much improvement over 32-bit?
Graphics card is the other likely suspect.
On the work PC that is causing me trouble, graphics card= ATI Radeon HD 3450.
In Bridge go to advanced preferneces and check "use software rendering". That will help if graphics card is underpowered.
That will help with what, exactly? Will that help avoid corrupted files? It seems like the problem lies in Photoshop, not necessarily with Bridge.
In photoshop go the edit/kpreferences/file handling and make sure Open GL is not checked.
It was checked. I unchecked it, but still had images turning black on me when I cropped and saved them.
Your files are still OK, they only show not good in Bridge? or are they all damaged?
~15% of cropped scan tifs open mostly black in PS and Windows Explorer, and open mostly black in Bridge full-screen preview also. The other 85% look OK in all programs. The 15% initially look OK as thumbnails in Bridge, but after ~30 min, or if I try to open them in PS or full-screen preview, they turn mostly black. It would appear to me that those 15% of cropped scan files are corrupt, and perhaps only look OK in Bridge initially because Bridge is accessing some embedded low-resolution preview, then later updating the preview using the actual image file, but I’m not sure on that last point.
You state to have PS 12.0.3 in, while I'm on a Mac I have 12.0.4 installed s the latest so first try a software update.
That’s a pretty involved process with our IT dept. I don’t have Admin privileges to do that, but I’ll raise the issue.
Also check your PS performance settings. If you have only 4 GB RAM installed and you did point PS to more then the default and having some other applications open you will become soon short of RAM. (Bridge pointed to that already)
This is a point of confusion for me. PC specs list 3.25GB RAM, but in PS prefs, “Available RAM: 1691MB, of which 71% (1201 MB) is allowed for PS use. I would think PS would at least recognize all the PC RAM as available, but this is also the general trend on my home PC where PS doesn't recognize all the RAm that Windows does...must be a distinction between total RAM and available RAM.
In Bridge Prefs the default setting for maximum file size to build HQ preview is 1GB. Could you check if this is also your case?
Yes, that is the case.
And I also agree with Curt that if you have multiple files open with that size your machine specs should be above average, and you should have at least 10 % free space on your HD.
I’m running at about 50% free HD space, though fragemented. I would like to make some sort of recommendation to IT about a system upgrade, and it seems like a better processor is a key factor, followed by the OS and graphics card. Without going to a 64-bit system, I believe I'm maxed out on RAM, but correct me if I'm wrong. Our organization prefers everyone to be on the same OS, which is why we're all still on WinXP.

Aspect ratio when exporting full quality -- is this a bug?

Hi,
I'm new to iMovie. I'm really enjoying playing around with it and think it's a really nice tool and very intuitive. But there's one thing that is bothering me. I'm working with 16:9 aspect ratio (Widescreeen) as the project type which corresponds to how the movies were recorded (a Canon MVX4i or Optura 600 in the USA I think). Everything works fine until I try to export in full quality format (using Export). The .dv file only plays back in 4:3 aspect ratio. I tried using the Expert settings, with 16:9 set and both PAL and NTSC but QuickTime and Preview still only see the movie in 4:3 aspect. If I understand correctly, the aspect ratio is just a flag that is set somewhere.
Is this a bug or am I missing something? I don't have QT Pro by the way?
One more question: in expert settings for DV Export settings, does anyone have a recommendation for what I shold pick for DV Format, and Scan mode?
Thanks very much in advance,
David
Powerbook G4 Mac OS X (10.4.4)

Hi David,
This isn't entirely unique to DV. But in simplistic terms what happens is that the widescreen footage that you capture with your camera is the same resolution as square screen. The number of pixels (the dots that make up the picture) for PAL, which is the format used in Portugal I believe, is 720 x 576.
The pixels are squashed into a kind of oblong shape but then when played on widescreen kit the pixels become square causing the picture to stretch sideways. When you view the footage in QT it simply shows the picture as is - meaning that it outputs the picture as 720x576 with the oblong display.
However, when you view the footage in iMovie there's a flag in the file that tells iMovie that the footage is wide and therefore to stretch it accordingly.
There's a differing opinion of whether this display difference in QT is a bug or a feature. As Dan says, if you want to display widescreen footage in QT you're better off exporting a widescreen QT movie using the expert settings:
From within iMovie...
- Select File --> Export from the menu
- In the Quicktime section choose Compress Movie For "Expert Settings"
- Click the Share button
- In the save dialog box that pops up Select "Movie to QuickTime Movie" in the Export section
- Click Option...
- In the Movie Settings dialog box click on settings
- Select DV - PAL from the compression type
- Keep the Frame Rate at Current
- In the Compressor settings choose your Quality
- Set the scan mode to Interlaced
- Set the Aspect Ratio to 16:9 ( this is the bit that tells QT to play in widescreen)
- Click OK
- In the sound section click the Setting button
- In the sounds settings dialog box set the Format to Linear PCM
- Set the channels to Stereo (L R)
- Set the Rate to 48.000kHz
- Set the Sample Rate Converter settings to Quality Normal and the Linear PCM Settings to a sample size of 16 bits.
- Uncheck all the other options (Little Endian, Floating Point and Unsigned)
- Click OK
- Uncheck the Prepare for Internet Streaming box
- Click OK and set a destination for your file.
- Click save to compress the file.
The resulting file that is created above should now show in QT as widescreen. However you should bear in mind that you should work off the raw DV file rather than this new created one in iMovie. As a rule of thumb you should be thinking a little bit about the output media of the file. So for example if your final output medium is DVD then you can continue to work in iMovie and iDVD without problem. If you want to create a QT file for viewing on your computer then it's advisable to create a seperate QT file for this pupose.
If you'd like to know a little more about the way aspect ratios works here's some links for you:
Wikipedia
World easiest explanation of anamorphic 16:9
Hope this makes a little more sense now and sorry if I've covered stuff you already know. Hopefully this information will be of use to you but post back if you need more help.
Cheers.
David.
PowerMac G4 Dual 1.25Ghz / 1GB RAM Mac OS X (10.4.5) PowerBook 12" 1Ghz / 768MB RAM

Video clips black when viewed full screen or exported?

I'm just taking my first steps with iMovie - apologies if this is a real newbie question or a FAQ (I have searched for answers already without success).
I've imported some video from my camera (Pentax W90) without a problem. I've split it into clips, selected sections, and added some simple titles and effects - all seems quite easy. I can view my new movie with no problem in the preview window.
However, if I try to view the movie full screen, or export it, the video content is all black. The titles are fine, just none of my video footage. I've tried exporting in various formats and sizes and it's always the same.
Where did I go wrong and how can I fix this?

*edit
Found workaround for this problem on web.
1. right click on itunes on your desktop and go to properties.
2. click on compatibility tab
3. check box for "Disable display scaling on high dpi settings and apply.
You will get a warning when you open itunes now that display settings are now set to an older version or something like that but just hit ok....and now full screen video! Probably isn't quite as clear as it should be if apple fixed this problem (I mean come on I know there have to be a ton of us out here that use large lcds or plasmas as our monitors so why its not fixed beats me) but hey at least it works in fullscreen mode this way. The major problem with this workaround is that it makes it quite hard to see text and other things in itunes store because they are now quite small. So what Ive had to start doing is keep it on normal settings while I go into itunes, and do my searching and renting and buying videos, then close it, make the changes of the workaround and then reopen it so that I can watch in fullscreen. Yeah its a pain but it works.
Message was edited by: batou01

720 p50 MXF doesn't playback on full quality

I had troubles with log&transfer so I bought Raylight for mac and it worked just fine until...
I have (shot with panasonic hpx555) DVCPRO HDi50 clips, so I adjusted the sequence setting based on these clips and some slow mo clips 720p50 that I'm using on the same sequence. When on pause the quality of the 720p50 clips is perfect but on playback the video looks like its pixelated.
I tried these slow mo clips on a new sequence and adjusted the settings thinking it will solve the problem but it didn't. I tried different settings on raylight but stil getting the same pixellated playback.
Do You have any information why wouldn't these clips (DVCPRO HD 720 p50) playback on full quality.
P.S. I apologize for threadjack, not on purpose!

Where is this footage stored? Faster drives take care of this. But regardless,
#2 Blurry Playback
Shane's Stock Answer #2: Blurry playback
ONLY JUDGE THE QUALITY OF YOUR MATERIAL ON AN EXTERNAL BROADCAST MONITOR, OR AT LEAST A TV.
The Canvas shows you what happens after the codec you are working with has been applied. The Viewer shows you the material in its native format. Once you drop the footage from the Viewer into the timeline, it inherits the attributes of the sequence. If it is a DV sequence, the footage will render out as DV.
1. Disable overlays on the Canvas.
2. Make sure you've rendered everything (no green bars at the top of the timeline).
Video playback requires large amounts of data and many computations. In order to maintain frame rate and be viewable at a normal size, only about one-fourth of the DV data is used in displaying the movie to the screen. However, the DV footage is still at full quality, and is best viewed thru a TV or broadcast monitor routed thru your camera or deck.
Shane

Full Quality Export looks Poor

hi everyone,
i have a question because I am trying to do a full quality export for my compositor and color corrector.
the "export quicktime" - make movie contained option seems to create a movie that appears grainy and the fonts created on livetype are very blurry.
can finalcut export a full quality picture? or is exporting to tape the best option?
or is the problem from the import? I shot my footage on a panasonic dvx100A (25p PAL) and imported as a DV PAL. Should I have chosen another option?
appreciate any advice! thanks!
joshua lim

#2 Playback is blurry
Shane's Stock Answer #2:
ONLY JUDGE THE QUALITY OF YOUR MATERIAL ON AN EXTERNAL NTSC MONITOR, OR AT LEAST A TV.
1. Disable overlays on the canvas
2. Make sure you've rendered everything (no green bars at the top of the timeline
http://docs.info.apple.com/article.html?artnum=24787
DV footage requires large amounts of data and many computations. In order to maintain frame rate and be viewable at a normal size, only about one-fourth of the DV data is used in displaying the movie to the screen. However, the DV footage is still at full quality, and is best viewed thru a TV or NTSC monitor routed thru your camera or deck.
#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane
"There's no need to fear, UNDERDOG is here!"

Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black but I can see the arrow (pointer). And only after few seconds the arrow and the screen really shut down.

Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black (although I can see it is stil on) and I can see the arrow (pointer). Only after 15 seconds the arrow and the screen really shut down. It did not occur before, as a matter of fact it was instantaneous. What could be the problem?

Note the time in your Mac's menu bar or some other accurate timepiece. Then, press the button to put the MBA to sleep. Wait until the cursor disappears and for all indications that the Mac appears to be asleep.
Then, wake the Mac the way you normally wake it.
Then, find the Console app - it is in your Utilities folder and looks like this
You can find it by selecting Utilities from the Finder's Go menu.
Open Console.
If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu.
Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's sleep problem. To do that type the words sleep cause in the Filter field at the upper left of the Console window:
That will cause all log entries to be hidden, except for the entries containing those words. The last entry in the list will correspond to the last time you woke the Mac. It will have a time stamp in the form hh:mm:ss later than the time you noted in the Mac's menu bar prior to putting it to sleep.
Make note of that exact time in hours, minutes, and seconds.
Next: Clear the filter field by clicking the x in the above screenshot. It should then look like this:
All previously displayed log entries will reappear.
Next: Find the log entry that corresponds exactly to the time you noted in hours, minutes, and seconds containing the words "previous sleep cause". You may have to scroll up or down a considerable distance. When you find that line, select it and drag your cursor up and prior to the entry corresponding to the approximate time you noted before putting the Mac to sleep. This will result in a selection of perhaps 50 to 100 lines or so.
One or more of them, along with their time stamps, may reveal the reason for the fifteen second delay.
Copy and paste those log entries in a reply.
Most of the entries will be cryptic but will contain information you might consider personal such as your Mac's name. If you do not want that information to appear, delete or obscure it when posting your reply. Leave enough information so that the entries can be deciphered.

Why does my screen turn black when I play iTunes while working on iPhoto?

Why does my screen turn black when I play ITunes while working on iPhoto? I can't click off of the screen but get a message that reads Shut down computer by pressing button in back then turn computer back on by pushing button in back. That's followed by Chinese letters (which I cannot read). I have had other problems when playing iTunes (actually, a radio station on the Internet) while working on iPhoto. Before, I got a window that would pop up and tell me I had no disk space available, that I would have to quit applications that were open. Not many were open.
It would be nice if I could solve this problem once and for all.
Thanks in advance for all the suggestions. I truly appreciate your help.
Jan

That was easy. Thanks. Jan
Interval Since Last Panic Report: 1949305 sec
Panics Since Last Report:          1
Thu Feb 6 15:29:32 2014
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d89ff3, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7acd4a2a7c, CR3: 0x0000000085d3b000, CR4: 0x0000000000000660
RAX: 0xffffffff4bffff56, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000000
RSP: 0xffffff807867b7c0, RBP: 0xffffff807867b800, RSI: 0xffffff7acd4a2a7c, RDI: 0xffffff8065292000
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0xffffff7f81d44200, R11: 0xffffff800f8b45e8
R12: 0xffffff8065292000, R13: 0xffffff807867b860, R14: 0x0000000000000001, R15: 0xffffff7acd4a2a7c
RFL: 0x0000000000010286, RIP: 0xffffff7f81d89ff3, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff7acd4a2a7c, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff807867b470 : 0xffffff8000220792
0xffffff807867b4f0 : 0xffffff80002c4794
0xffffff807867b6a0 : 0xffffff80002da55d
0xffffff807867b6c0 : 0xffffff7f81d89ff3
0xffffff807867b800 : 0xffffff7f81d8a694
0xffffff807867b890 : 0xffffff7f81d8b4ed
0xffffff807867b8d0 : 0xffffff7f81d472a1
0xffffff807867ba40 : 0xffffff7f81d8bd6d
0xffffff807867bb00 : 0xffffff7f81d44346
0xffffff807867bb60 : 0xffffff8000655f3e
0xffffff807867bb80 : 0xffffff800065681a
0xffffff807867bbe0 : 0xffffff8000656fbb
0xffffff807867bd20 : 0xffffff80002a3f08
0xffffff807867be20 : 0xffffff8000223096
0xffffff807867be50 : 0xffffff80002148a9
0xffffff807867beb0 : 0xffffff800021bbd8
0xffffff807867bf10 : 0xffffff80002af140
0xffffff807867bfb0 : 0xffffff80002dab5e
      Kernel Extensions in backtrace:
         com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d390 00->0xffffff7f81dfbfff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 b0000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f8089e000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80865000
BSD process name corresponding to current thread: iPhoto
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 11526391261403
last loaded kext at 23020191300: com.apple.driver.AppleHWSensor    1.9.5d0 (addr 0xffffff7f8234b000, size 28672)
last unloaded kext at 522057763087: com.apple.driver.AppleFileSystemDriver    13 (addr 0xffffff7f8254c000, size 12288)
loaded kexts:
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AppleBluetoothMultitouch    70.12
com.apple.filesystems.autofs    3.0
com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
com.apple.driver.AudioAUUC    1.59
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleHDA    2.2.5a5
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMikeyDriver    2.2.5a5
com.apple.driver.AppleBacklight    170.2.2
com.apple.driver.AppleMCCSControl    1.0.33
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.AGPM    100.12.75
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.3
com.apple.driver.ApplePolicyControl    3.1.33
com.apple.GeForce    7.3.2
com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.8f17
com.apple.driver.AppleUSBCardReader    3.0.6
com.apple.driver.AppleIRController    312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.1.0
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleFWOHCI    4.9.0
com.apple.driver.AirPort.Atheros40    505.67.1
com.apple.driver.AppleAHCIPort    2.3.1
com.apple.nvenet    2.0.17
com.apple.driver.AppleUSBHub    5.1.0
com.apple.driver.AppleUSBEHCI    5.1.0
com.apple.driver.AppleUSBOHCI    5.1.0
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.4
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.AppleMultitouchDriver    231.4
com.apple.driver.IOBluetoothHIDDriver    4.0.8f17
com.apple.kext.triggers    1.0
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.driver.DspFuncLib    2.2.5a5
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.iokit.IOSurface    80.0.2
com.apple.iokit.IOAudioFamily    1.8.6fc18
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleGraphicsControl    3.1.33
com.apple.driver.AppleHDAController    2.2.5a5
com.apple.iokit.IOHDAFamily    2.2.5a5
com.apple.nvidia.nv50hal    7.3.2
com.apple.NVDAResman    7.3.2
com.apple.iokit.IONDRVSupport    2.3.4
com.apple.iokit.IOGraphicsFamily    2.3.4
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
com.apple.driver.IOPlatformPluginFamily    5.1.1d6
com.apple.driver.AppleSMC    3.1.3d10
com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
com.apple.iokit.IOBluetoothFamily    4.0.8f17
com.apple.iokit.IOSCSIBlockCommandsDevice    3.2.1
com.apple.iokit.IOUSBMassStorageClass    3.0.3
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBMergeNub    5.1.0
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.8
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOUSBFamily    5.1.0
com.apple.driver.NVSMU    2.2.9
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.11
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4
System Profile:
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST3500418ASQ, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x26200000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1003, 0x06400000 / 3
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x020b, 0x06430000 / 4
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 6

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring,so i open cimcas now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.

How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

I have upgraded from 10.5 to 10.6 and found that all folders/files/pics have pixelated (either white or black) patterns on them. But it turns out fine when i open up the affected files/folders/pics. And this phenomenon persists after updating software.

I have upgraded from 10.5 to 10.6 and found that all folders/files/pics in my disk drive have 'dotted' (either white or black) patterns on them. But it turns out fine when I open up the affected files/folders/pics. And this phenomenon persisted even after updating to the latest software. I proceeded to upgrade to 10.8 and updated the latest software thinking that this might resolve the problem but still stays the same way as it was. Could it be the Adobe flash player that is causing this problem? Please help.

this posting shows how to migrate wiki. http://discussions.apple.com/thread.jspa?threadID=2205892
I did it and it worked.

After resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!

after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!

Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device

My macbook pro doesn't turn on. The battery is charged but the screen stays black when I press the power button. Anybody has a solution for me please?

My macbook pro doesn't turn on. The battery is charged but the screen stays black when I press the power button. Anybody has a solution for me please?

Try a #1 SMC Reset and see the Apple links, if that doesn't work make a appointment for a evaluation.
..Step by Step to fix your Mac

When moving the MacBook09 screen, turns display black/dimmed

This problem might be a loose wire, but which I highly doubt it...
Anyways everything is working fine w/ the MacBook09, it's just that when I move the Screen; tilt, display screen turns dimmed black(still able to see through it w/ all my programs running etc.) The lights of the screen ONLY come back on if I sleep the laptop OR not move the laptops screen at all.
Has anyone have this issue, and had it fixed some how. By the way, sadly that I don't have warranty for my laptop hopefully it's still fixable.
Please notify ASAP. Thanks Community

I've been havign the same trouble and I tried resetting the SMC (you can find the instructions on apple.com/support/macbook ) and it didn't work for me. I'm taking mine to an authorized shop to see if I should replace the backlight or not. Apparently this is very expensive. My macbook is also from Mid09.

Cartoon filter turning footage black when in full quality

Similar Messages

Maybe you are looking for