CAS Array created but Outlook 2007 still points to first CAS Server

Hi All,
I just created a DAG between two servers and CAS Array between two other servers.
DAG:- EX01 -Mailbox, CAS,HT (First Exchange Server)
EX02-Mailbox
CAS Array: CA-HT01 (CAS & HT Role)
CA-HT02 (CAS & HT Role)
I created CAS Array and assigned an FQDN for that array but It does not get changed in outlook 2007 it still uses old server EX01.So when I am shutting down server ex01 for testing all outlook 2007 client
get disconnected.
Does this required to change profile for all outlook 2007 users? I am more than 1600 users I am not sure how many users using outlook 2007.
Please guide.I already configure Autodiscover service as it is suggested somewhere online but no luck.
Thanks

Mike,
I tried with shutdown original RPCCLientAccessServer for two days but still that old value did not
chnaged to new one.Can you guide me what is the exact method of creating Autodiscover so that outlook 2007 will point to new RPCCLientAccessServe value when
existing is down/not accessible.
Thanks
If the RPCCLientClientAccess Server referenced in the Outlook profile is not accessible, then Outlook should have found the new one at some point or failed to connect to Exchange entirely. Are you saying the Outlook clients continue to connect to Exchange
even though the server defined in Outlook was not accessible?
If you close and re-open Outlook does it show the new RPCCLientAccessServer value in the profile?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Similar Messages

Outlook 2013 won't open calendar items created on Outlook 2007

I have a user that recently got office 2013 pro plus on his computer. We created a new profile and connected him to exchange 2010. Now when he tries to open up a calendar item that was created prior to the 2013 install it just spins and you have
to cancel outlook. He can create new calendar items and then open them up again but any item that was created with 2007 locks up.
Any ideas?
Thanks

Hi Jason,
I agreed with ED's point. If everything in your mailbox can work well in OWA and Outlook 2007, the mailbox in your server side should be healthy and configured properly.
Personal opinion, I suggest that we can try another computer with Outlook 2013 to check whether the issue persists. Also start Outlook by using Outlook /safe and Outlook /cleanprofile switches to have a try.
Thanks,
Winnie Liang
TechNet Community Support

Acrobat 8.1 and Outlook 2007, still can't save as pdf

I have intalled Acrobat 8.1, and while all the PDF goodies seem installed in Word 2007, they are not installed in Outlook 2007. Still can't save as pdf in Outlook 2007.
I querried at MS Forums, only to be referred to Adobe Forums. --GJ

To PDL
It doesn't matter what are the names of these forums. Major companies provide these *official* forums to harvest troubleshooting results of their products for free. You never be able to test your product on this number of various environment this much cheap.
Unlike their support services these "USER" forums provides them with those product issues they are looking for without ANY obligation to solve them or even accept their existence. And best of all they collect all these information at no cost.
However, in honest and considerate companies, development team members share their opinions with forum users. They even admit they are aware of issues but have no solution for them at this time. If team members do not have enough time for providing feedback, they somehow use *well-trained* individuals to discuss the issues.
Those companies do not "Read and Hide". They "read and discuss".
Anyway, unfortunatly, the links you found are not related to this discussion. They are about PDFMaker issue in other component of Office not Outlook.

Outlook 2010 cached mode cannot see GAL but Outlook 2007 can via Exchange 2010

Hi,
I have a problem similar to
this but with a different cause.
Our OAB config looks good from both Outlook 2007 and Outlook 2010. Both can see the GAL in non-cached mode but in cached mode only 2007 can see the GAL. In 2010 it's just not there. Even the same user can only see it in 2007.
Does anyone have any suggestions as to why this is?
Cheers,
Rob

Hi,
I have got the same issue, that I can't see updated OAB in outlook 2010.
Can you share the detailed path of the locations you have mentioned here:
In Office 2010, this happens but these values also exist in the [Service1] section and are blank:
OfflineAddressBookPath=
OfflineFolderPathAndFilename=
And how do we add locations to these paths?
Thank you in advance.

Outlook 2007 with Exchange 2010SP3 Scheduling assistant "Server unavailable"

Windows Server 2008 R2
Exchange Server 2010
Windows 7 Clients
Outlook 2007(fully patched)
When a user clicks "Scheduling Assistant" in outlook 2007 you immediately get a message popup saying...
"The connection to Microsoft exchange is unavailable. Outlook must be online or connected to complete this action"
I will include a Screenshot when allowed
Outlook is connected and no other issues/symptoms are present. out of office assistant works, everything else works.
You CAN access and use Scheduling assistant from the OWA
I did a wire-shark capture to see if maybe some packet would tell me what was going on however im not sure what i was seeing, its a 3 packet response.
1 0.000000000
xx.xx.xx.Host xx.xx.xx.Server DCERPC
290 Request: call_id: 43, Fragment: Single, opnum: 7, Ctx: 0
Header checksum: 0x0000 [incorrect, should be 0x5066 (may be caused by "IP checksum offload"?)]
2 0.001848000
xx.xx.xx.Host xx.xx.xx.Server DCERPC
274 Request: call_id: 44, Fragment: Single, opnum: 9, Ctx: 0
Header checksum: 0x0000 [incorrect, should be 0x5075 (may be caused by "IP checksum offload"?)]
3 0.203054000
xx.xx.xx.Host xx.xx.xx.Server TCP
54 65082 > 6008 [ACK] Seq=457 Ack=265 Win=255 Len=0
Header checksum: 0x0000 [incorrect, should be 0x5150 (may be caused by "IP checksum offload"?)]

hi,
how u resolved that problem or what AD changes u done?
Thanks Regards,
Pradeep

Sync ok but outlook 2003 contacts filed by first name

I have a Treo 600 smartphone using the palm os and just bought BB Rim curve 8310. The sync went fine but all my contacts are filed by first name which is unacceptable. The "file as field" in outlook does not come up in the advanced sync choices. Please tell me how to change this. Many thanks.

Hi and welcome to the forums,
See if this relevant to your problem:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB03050&sliceId=SAL_Pub...
Thanks,
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Mirgrate from 2003 to 2010, mailbox migrates complete, but recipient mailbox still shows connected to 2003 server

Last night I migrated the last of my 2003 accounts to 2010 server. (we have successfully migrated 1000+ accounts with no issue). This morning, I looked at the Move Requests and they all showed as Completed. Some users reported being unable
to open their mailboxes. When I look in EMC, the mailbox recipient shows still connected to the old 2003 mailbox. When I try to manually migrate them, I receive an error that the user is already in the target database. (I have already cleared the
move request)
Looking in Disconnected mailboxes - they do not show up.
2003 ESM shows them as disconnected mailboxes.
How can I get them to connect to the database in 2010?

Both servers have been rebooted - thereby, restarting the store.
If other people try to email these users they receive the following bounce messages.
Delivery has
failed to these recipients or groups:<o:p></o:p>
[email protected]
There's a problem with the recipient's mailbox. Please try resending this
message. If the problem continues, please contact your helpdesk.<o:p></o:p>
Diagnostic information for administrators:<o:p></o:p>
Generating
server: SvrEX01.mydomain.local
[email protected]
#554-5.2.1 mailbox disabled 554 5.2.1 STOREDRV.Deliver.Exception:AccountDisabledException.MapiExceptionMailboxDisabled;
Failed to process message due to a permanent exception with message Cannot open
mailbox /o=Hospice/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=SvrEX01/cn=Microsoft System
Attendant. 16.55847:9F000000,
17.43559:000000001001000000000000CA00000000000000, 255.23226:00000000,
255.27962:FE000000, 255.17082:6C090000, 0.26937:00000000, 4.21921:6C090000,
255.27962:FA000000, 255.1494:00000000, 255.26426:FE000000, 2.22787:00000000,
4.13032:0F010480, 0.25848:0F010480, 4.7588:0F010480, 0.25840:0F010480,
4.6564:0F010480, 0.22086:0F010480, 0.51399:0F010480, 4.2567:6C090000,
0.19452:0F010480, 4.2199:6C090000, 0.56415:0300AF80, 4.48223:6C090000,
4.17097:6C090000, 4.8620:6C090000, 255.1750:B0844210, 0.26849:0F010480,
255.21817:6C090000, 0.26297:0F010480, 4.16585:6C090000, 0.32441:0F010480,
4.1706:6C090000, 0.24761:0F010480, 4.20665:6C090000, 0.25785:0F010480,
4.29881:6C090000 ##<o:p></o:p>

CAS Array and DAG Site Resiliency (2 Remote Sites via Point to Point Protocol)

Hi, we are planning to deploy Exchange HA and Site Resiliency but i had some troubles understanding some concepts.
Out current configurations settings:
Datacenter A:
1 MB/CAS/HT (MB01)
1 CAS (CAS01)
1 Point to Point link between Datacenter A and Datacenter B (We create a VLAN in the remote datacenter pointing to the Active Directory site where our Exchange server is).
1 Active Directory Site with 2 Domain controllers (with VLAN 192.1.3.x in Datacenter A and VLAN 192.1.20.x in Datacenter B)
Datacenter B:
We want to install a new Exchange CAS Server (CAS02) in VLAN 192.1.20.x, is it posible to create a CAS Array with this configuration considering the replication network for the cluster in the MS Windows Server NLB, so that our Virtual IP of the cluster points
to 192.1.3.x VLAN? What are the network considerations to the replication and MAPI network between VLANs? Does we need some third party NLB or this could be achieved with MWS2008R2?
Same configuration for the DAG, with a new server (MB02) just for the MB role. The idea is to remove the CAS role from MB01 and have 2 Exchange Mailbox servers members of the DAG and 2 Exchange CAS Servers members of the CAS Array, so in case of a disaster
in Datacenter A our clients automatically failover to Datacenter B in this case all of our clients will be pointing to the CAS Array in their Outlook.
Hope you can help me with this, i don't know if this is possible with our actual infraestructure.
Best Regards,
Gerardo

Thanks Ed,
So in that case we will need at least 4 servers in Datacenter A (2 MB members of DAG and 2 CAS/HUB members of the CAS Array) to get a decent HA solution, Am I correct?
What about the other server in Datacenter B for DR, it will be a passive node or just another multirole server. So in case of DR (Let's say our Datacenter A is totally wrecked) I will need to switchover manually with my DB backups and switchover the user
mailbox and outlook clients to point to the DR server? I didn´t get the point of the DR server in Datacenter B, can you explain a little bit more?
I'm totally agree with you about the false positive failovers because our network doesn't meet that requeriments at all.
Hope you can help me to clear my mind.
Best Regards,
Gerardo

Can't synch calendar appts with outlook 2007 but only in one direction?

i have the verizon iphone and aside from this one MAJOR glitch, i'm loving the phone. no dropped calls, and well, i had a palm centro, so this is a major upgrade in every way except for this one MAJOR glitch...
i'm synching my iphone with my work pc and using outlook 2007 on my company's exchange server. i first synched an ipad last month and now this iphone to my laptop and exchange and i'm having the problem with both actually.
i can add an appointment on my laptop and it pushes to my calendar on my iphone and ipad. BUT if i add an appointment on my iphone or ipad, it doesn't update to my calendar on my laptop. this is very strange!! i can see the added appointment from either one of the idevices on the other, BUT it never pushes to my laptop calendar. however, at the time i add the event, i'm looking at my laptop calendar and in the lower right corner where the exchange status bar is, i can see it quickly switch to say "waiting to update folders" and then it goes back to "all folders are up to date." so it appears that the devices and laptop outlook are communicating in some capacity, but the appointment doesn't make it to it's final destination on the calendar.
it gets even more strange. if i even EDIT an existing event from either one of my idevices, it will ERASE the event on my laptop calendar. to be clear, i don't know if this problem began with the initial intro of the ipad last month as i had never used it to edit calendars and only discovered it when i decided to test all scenarios.
so basically my i devices are communicating and pushing updates between each other, but my laptop updates are only pushing in one direction. if i do anything from either idevice it either doesn't push or it ERASES IT??!!
this is a major problem, but what i'm not certain of is where the origin is. is it iphone related, pc related, exchange related, software, firmware, hardware?
oh and otherwise everything else pushes fine in both directions with outlook exchange: contacts, email, even notes (although iphone notes are useless)
sorry for the lengthy explanation, but i am just stumped.
thanks in advance for any help!! if no luck, guess i'll have to try bellying up to the genius bar...

Found the problem. The iMac G5 that I couldn't connect to (but could connect from) was actually connected to another company's wireless network that is on our floor. After switching back to our network all problems were resolved. A relief...

Is Outlook 2007 compatible with Office 365?

Is Outlook 2007 compatible with Office 365? The Office 365 will be part of Windows 2012 Essentials.

As of the time I am writing this, outlook 2007 still works (but I can personally attest that the experience isn't great.) By the time you read this, that can change and it may not work anymore. Microsoft only guarantees compatibility wothnoffoce
products in mainstream support. So that is 2010 and 2013 (or 365 Pro Plus equivalents.) 2007 is only in extended support, so MS has no guarantees or obligation to maintain compatibility, and they *specifically* call out 2007 support in their supported client
documentation.
More info here:
http://office.microsoft.com/en-us/office365-suite-help/office-365-system-requirements-HA102817357.aspx

Icloud add-in is missing in outlook 2007

I installed icloud control panel on Windows 7 running Outlook 2007...The first time it synced by Contacts to iCloud. After that,no more syncing. I checked for icloud add-in trust center..nothing.
I have uninstalled and installed icloud countless times...tried everything..
Contacts will sync the first time (causing more duplications), but after that...nothing.
I also have added constact to the icloud contacts (not regular contacts folder)...no sync..
I have called apple support...they listened but no help.
icloud is worthless!?

I had this problem and have just now solved it. Here is what I did.
My system is Win 7 Ultimate with Outlook 2013 64 Bit.
1. Unchecked the tick in front of "Mail, Contacts, Calenders and Tasks" in the iCloud Control Panel
2. Signed out of the iCloud Control Panel
3. Uninstalled the control panel
4. Rebooted
5. Access the "Mail" applet in the Windows 7 Control Panel
6. Clicked the "Show Profiles" button
7. Clicked on the "Add..." button and created a new profile
8. I set this "New" profile as the default one by selecting "Always use this profile" and picking the new profile just created
9. Downloaded the iCloud control panel and reinstalled it
10. Let the iCloud Control Panel do its thing.
11. Setup your me.com or icloud.com address when prompted
12. Start up Outlook
13. iCloud will start up and setup the Outlook System to work with iCloud
14. Problem Solved
15. Add all your other email accounts now

Emails disappear automatically from outlook 2007 exchange 2010

Hello All,
I have an urgent issue with my CEO , my environment contain exchange 2010 mailbox/HUB/CAS, CEO have an outlook 2007 and he face an issue with his emails, he received emails and before he open it disappear after few time, when i open the recovery deleted items
i found the emails and they didn't appear in deleted item folder only on recovery deleted items, so any suggestions please.
notes :
No rules in outlook
No Auto archive
his computer have a FEP as antivirus.

Hi,
Can you see the missing emails from OWA?
Have you tried to start Outlook in safe mode to check if any third-party add-ins caused this problem? To do this, press Windows key + R, type
outlook.exe /safe in the Run dialog box and press Enter.
If the issue would be gone in safe mode, please disable suspicious add-ins referring to the following article:
http://office.microsoft.com/en-in/help/enable-or-disable-add-ins-in-office-programs-HA010034127.aspx
Please also check if your virus scanner is integrated with your Outlook. If so, disable it to check the result.
If possible, we can try to create a new mail profile in control panel to check if the issue persists:
http://support.microsoft.com/kb/829918/en-us
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support

ICloud + Outlook 2007 sync issues..........

iCloud: Mail server settings for email clients
While synchronizing folders for *name*@me.com (or @icloud.com), outlook 2007 could not connect to the server…. I have checked all icloud mailserver settings several times and have also reinstalled the icloud control panel twice…
Reason why this is frustrating me is is because I use the calendar sync function with my iOS devices…. At this moment my iCloud calendars are not being synced anymore.
The settings I have tried are from this page http://support.apple.com/kb/HT4864. But i have tried a couple of other settings of that as well…
Also the icloud refresh button is gone. I checked whether the addin is disabled. It was, so I enabled it but still no synchronization……
I'm about to throw the **** thing out of the window and switch to android….nah just kidding
I really Hope you guys have the solution for me. I need to have this fixed!
Thanks!
Niels

How strange is this!!!
I tried this today several times (at work). It did not work, time after time. now im at home, the setup runs fine and settings are making the whole thing work after all.
Maybe it has something to do with VPN and Firewalls at work....
Thanks for your suggestion, however i already knew I did work!
Thanks!

Outlook 2007 - Outgoing mail server from a 3rd party

I tried to set up the outgoing mail server for my Outlook 2007 with a 3rd party mail server. e.g. mail.xxxx.com, and I could not send the e-mail at all. If I set up the outgoing mail server as outgoing.verizon.net, I can send the email to everyone else but not to this 3rd party mail server mail.xxxx.com. I received the undeliverable message from Verizon that the mail was rejected due to not being able to log on to this 3r party mail server. I am working for this company from home and it requires me to set up this for my outgoing mail server. Does anyone know how to fix this, including specifying what needs to be done at the 3rd party mail server to change to accept emails sent from outgoing.verizon.net? Thank you in advance. Andy

Port 25 is the standard for SMTP, although some now use a submission port, 587. I know port 25 off network is blocked for residential users, I don't know if 587 is blocked off network because I have never tried it. I suspect it is. Verizon is by no means the only ISP to do this.
Business accounts do not have blocked ports as far as I know, so if you have a business account, you are free to communicate using port 25 anywhere.
Verizon has recently gone to non-standard port assignments for SMTP and POP servers. see
http://www22.verizon.com/ResidentialHelp/FiOSInternet/Email/Setup+And+Use/QuestionsOne/124289.htm?CM...

Duplicate Emails - Outlook 2007

Hi
We had configured Pop account in Outlook 2007 and set email remove from server after receiving to outlook. Also using BlackBerry Torch Device email. There was no problem with duplicate emails because no email on the mail server. Working both fine
( Office Outlook and BB Torch)
Now we brought BlackBerry Z10 Device. Configured email account on it. If send email from sender first receive it on the BB device and when sync with Outlook all emails deleted from mail server. After deleting mail server it automatically delete from BB device.
In short we are in trouble in both side. If set delete email after receiving in outlook then unable to see on BB. If want to see all emails on BB need to keep leave copy in outlook and duplicate emails receive problem. it's duplicate email issue
is occur suddenly it may come after 2 months Or 6 months.
Is there any connection with size of pst file for duplicate emails? Is there connection with location of pst file ( C:\........ OR different)?
Please guide us for that we need to do.
Thanks & Regards,
Suhas

Hi,
Based on the description, if you receive emails on Outlook first, since the emails are removed from the server, you are not able to see the emails on your BlackBerry device. If you receive emails on your BlackBerry device first, you encounter the "Duplicate
emails" issue.
Is my understanding correct?
Please kindly detail what it means by "Duplicate emails", does it mean you receive two same messages on the BlackBerry device?
Try to re-setup the account on your BlackBerry device and test if you still get duplicate emails.
If your ISP provides IMAP protocol, we suggest you setup the account via IMAP, which keeps the emails synced on all of your devices.
For further support about your BlackBerry device, please contact BlackBerry support:
http://worldwide.blackberry.com/gettingstarted/?CPID=OTC-GETSTARTED
Regards.
Melon Chen
TechNet Community Support

CAS Array created but Outlook 2007 still points to first CAS Server

Similar Messages

Maybe you are looking for