CAS servers became unresponsive while applying rollup 7

When I applied rollup 7 to a CAS/Hub server, it became unresponsive for several minutes. Users in outlook were disconnected from their mailboxes, and some still hit the bad server on closing/reopening outlook.
Is there an easy way to take a CAS server "out of the loop" while applying the rollup?

You need to remove the server from the load balancer pool *BEFORE&* you start doing maintenance on it.
Do this via the various management interfaces that the LB device has - web UI, command line or fat client.
There is nothing in Exchange 2010 that will do this for you. It needs to be done on the load balancer.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

My screen became unresponsive to scrolling while i was using google.

While i was trying to download some software from one of the poker sites, the scrolling feature became unresponsive and the screen sort of went dim. Any thoughts, i've only had the ipad for about a week?

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

OWA 2013 Redirect to CAS Servers 2010 Randomly

Hello there!!
I think my case is not a problem, I just need a workaround or some fine adjustment to serve my needs. Follow my scenario:
One Exchange 2013 Server (CU3) with Mailbox and CAS role (coexisting with the 2010 Servers, ready for migration)
Two Exchange 2010 CAS Servers SP3 no rollups
Two Exchange 2010 Mailbox Servers SP3 no rollups (in a DAG)
I have two organizations who share the same exchange infrastructure, just using different smtp address, for example, some users use @yyy.com addresses and others use @zzz.com. We have two CAS servers just to use two different and customized OWA layouts (with
distinct OWA Internet addresses), one for @yyy.com users and other for the @zzz.com users
Also, I have the following database organization:
DB01 - @yyy.com mailboxes - 2010
DB02 - @zzz.com mailboxes - 2010
DB03 - @zzz.com mailboxes - will migrate to 2013
I need to do a partial migration to Exchange 2013, which is to migrate all mailboxes from DB03 database to Exchange 2013,
which will use the owa address for the @zzz.com addresses (We will point it to the new 2013 server).
The problem is that when users from DB02 try to use the 2013 OWA (@zzz.com), Exchange will bring up one of the 2010 OWA interfaces, sometimes the yyy.com customized interface and sometimes the zzz.com customized interface, and I need them to use just
the zzz.com interface.
There is any way that I can force Exchange 2013 to redirect the 2010 OWA users from a specific database to a specific CAS server? I found the command "Set-MailboxDatabase "Database Name" -RpcClientAccessServer EX2010-1.domain.local"",
but this work only for internal use (Outlook over RPC)
Best Regards Folks

Hi,
Firstly, I’d like to explain, the property RpcClientAccessServer shows the CAS server which mailbox connects to. It applies to all users and has no influence on OWA redirection. Because this value determines the location of the RPC end point and OWA request
use HTTPS protocol.
As far as I know, when there are many CAS Servers with same version in the same site, we couldn’t determine the CAS server which OWA request will redirect to.
Maybe we can take advantage of Proxy: proxy request from Exchange 2013 to Exchange 2010 and "disable" redirection:
http://social.technet.microsoft.com/Forums/exchange/en-US/999e3d3c-5919-4fa2-8e3e-a2c952214159/exchange-2010-cas-redirection
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Error while applying patch 3384350

Hi all,
I'm receiving the following error while apply patch 3384350 (Supply Chain Management Family Pack J 11i.SCM_PF.J) to an 11.5.9 instance.
from adpatch.log:
The following Oracle Forms objects did not generate successfully:
inv forms/US INVTDILT.fmx
from worker log:
Compiling package body CHECK_RESERVATIONS_ALLOCATIONS...
Compilation error on package body CHECK_RESERVATIONS_ALLOCATIONS:
PL/SQL ERROR 358 at line 12, column 9
column 'INVENTORY_ITEM_ID' exists in more than one table; use qualifier
PL/SQL ERROR 0 at line 10, column 2
SQL Statement ignored
I have a SR open, but thought I would ask here as well in case anyone else had ran into this issue. There was only 1 direct hit on metalink for this error and it provided no solution and it's bug # link was not accessible to the public.
thanks in advance,
-Chad

Compiling package body CHECK_RESERVATIONS_ALLOCATIONS...
Compilation error on package body CHECK_RESERVATIONS_ALLOCATIONS:
PL/SQL ERROR 358 at line 12, column 9
column 'INVENTORY_ITEM_ID' exists in more than one table; use qualifier
PL/SQL ERROR 0 at line 10, column 2
SQL Statement ignoredA workaround is to precede the column name ('INVENTORY_ITEM_ID') with the table name so that the column reference is unambiguous. Please note that this is only a workaround to fix the issue if you cannot afford waiting to hear back from Oracle support with a proper solution.

Opatch error while applying Windows patch 6 (9.2.0.8.0) on EBS 11i Database

Hi,
I am upgrading our EBS 11i database (9.2.0.5.0) to 9.2.0.8.0 by following note : 216550.1 (Interoperability Notes Oracle Applications Release 11i with Oracle9i Release 2 (9.2.0)).
I have installed Opatch 2617419 and then installed 6880880 (p6880880_101000_WINNT.zip) (OUI patch).
While applying Windows patch 6 (5916268) ,using opatch I am getting the following error:
OPATCH_JAVA_ERROR=OPatch Exception while trying to check for Mini Patchset
Cannot check bug/file conflict and component prerequisite checks.
ERROR: OPatch failed during prerequisite check.
OPatch returns with error code = 150
Any help to resolve the issue is appreciated.
I saw note +'OPATCH_JAVA_ERROR=OPatch Exception While Trying to Check for Mini Patchset' while applying patch using opatch 1.0.0.0.x [ID 971783.1].+
There are no '&' in the inventory file. There are a lot of '<'. I dont know if this note is applicable.
Thanks
Thiru.

Hi,
I am following section 2 only.
In Section 2, # 7 we have to apply latest Oracle Patching Tool (OPatch) patch 2617419 and in # 8 we have to apply additional 9.2.0.8 RDBMS patches ( in our case it is Windows patch 6.
I am getting issue while applying Windows patch 6 using opatch.
Rgds,
Thiru

Getting error while applying BP08 in OIM

While applying BP 08 on OIM I am getting below error.
export-metadata:
[exec] Error: Could not find or load main class oracle.iam.patching\patchAutomationExportMDS
BUILD FAILED
C:\Oracle\Middleware\Oracle_IDM1\server\setup\deploy-files\automation.xml:145: The following error occurred while executing this line:
C:\Oracle\Middleware\Oracle_IDM1\server\setup\deploy-files\automation.xml:53: exec returned: 1
I am following the steps mentioned in "Stage 3: Patching the Oracle Identity Manager Managed Servers" running patch_oim_wls.bat
Please help
Thanks,
Gaurav

See the below link
Oracle DBA and RAC DBA Expert: Reason: Cannot apply patch due to fatal error & CheckActiveFilesAndExecutables failed
I hope it resolves your issue.
Regards,
http://www.oracleracexpert.com

Dispatcher stopped because of error while applying patches.

<b>Hi All,
I was applying basis patch level 12 on a Netweaver '04 application server but unfortunately the tablespace got filled up and the SAP application became unresponsive.
Now i have created new datafiles and also deleted the patch entry from tables PAT01 and PAT02. But still the dispatcher stops when i try to logon.
I am pasting the contents of the file dev_disp.
Please somebody help me out.</b>
trc file: "dev_disp", trc level: 1, release: "640"
Tue Feb 27 13:00:30 2007
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid   560 (PC with Windows NT)
relno      6400
patchlevel 0
patchno    43
intno      20020600
make:      multithreaded, Unicode
pid        3816
***LOG Q00=> DpSapEnvInit, DPStart (00 3816) [dpxxdisp.c   1100]
     shared lib "dw_xml.dll" version 43 successfully loaded
     shared lib "dw_xtc.dll" version 43 successfully loaded
     shared lib "dw_stl.dll" version 43 successfully loaded
     shared lib "dw_gui.dll" version 43 successfully loaded
Tue Feb 27 13:00:35 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm)          25008     (1316)
DpShMCreate: sizeof(tm_adm)          2780232     (13832)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpShMCreate: sizeof(comm_adm)          290000     (580)
DpShMCreate: sizeof(vmc_adm)          0     (372)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY          (addr: 04550040, size: 3207168)
DpShMCreate: allocated sys_adm at 04550040
DpShMCreate: allocated wp_adm at 04551B58
DpShMCreate: allocated tm_adm_list at 04557D08
DpShMCreate: allocated tm_adm at 04557D30
DpShMCreate: allocated wp_ca_adm at 047FE978
DpShMCreate: allocated appc_ca_adm at 04804738
DpShMCreate: allocated comm_adm_list at 04806678
DpShMCreate: allocated comm_adm at 04806690
DpShMCreate: allocated vmc_adm_list at 0484D360
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0484D388
DpShMCreate: allocated wall_adm at 0484D390
MBUF state OFF
Tue Feb 27 13:00:36 2007
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1227 blocks reserved for free list.
ES initialized.
Tue Feb 27 13:00:37 2007
J2EE server info
start = TRUE
state = STARTED
pid = 2244
argv[0] = F:\usr\sap\HMI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = F:\usr\sap\HMI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=F:\usr\sap\HMI\SYS\profile\HMI_DVEBMGS00_hsdnt2400904
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1108
argv[5] = -DLISTEN_PORT=1109
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=HMI
argv[8] = -DSAPMYNAME=hsdnt2400904_HMI_00
argv[9] = -DSAPPROFILE=F:\usr\sap\HMI\SYS\profile\HMI_DVEBMGS00_hsdnt2400904
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c   1462]
***LOG Q0K=> DpMsAttach, mscon ( hsdnt2400904) [dpxxdisp.c   9736]
Tue Feb 27 13:00:39 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
Tue Feb 27 13:00:40 2007
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Tue Feb 27 13:00:42 2007
DpJ2eeLogin: j2ee state = CONNECTED
Tue Feb 27 13:01:17 2007
ERROR => W0 (pid 936) died [dpxxdisp.c   12187]
ERROR => W1 (pid 2252) died [dpxxdisp.c   12187]
ERROR => W2 (pid 3820) died [dpxxdisp.c   12187]
ERROR => W3 (pid 2264) died [dpxxdisp.c   12187]
ERROR => W4 (pid 732) died [dpxxdisp.c   12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W5 (pid 2268) died [dpxxdisp.c   12187]
ERROR => W6 (pid 2292) died [dpxxdisp.c   12187]
ERROR => W7 (pid 2300) died [dpxxdisp.c   12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W8 (pid 2308) died [dpxxdisp.c   12187]
ERROR => W9 (pid 2316) died [dpxxdisp.c   12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W10 (pid 1732) died [dpxxdisp.c   12187]
ERROR => W11 (pid 1704) died [dpxxdisp.c   12187]
ERROR => W12 (pid 2344) died [dpxxdisp.c   12187]
ERROR => W13 (pid 2352) died [dpxxdisp.c   12187]
ERROR => W14 (pid 2360) died [dpxxdisp.c   12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W15 (pid 2368) died [dpxxdisp.c   12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W16 (pid 1740) died [dpxxdisp.c   12187]
ERROR => W17 (pid 2384) died [dpxxdisp.c   12187]
ERROR => W18 (pid 2328) died [dpxxdisp.c   12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-936 (SIGUSR2)
ERROR => DpWpKill(936, SIGUSR2) failed [dpxxtool.c   2468]
killing W1-2252 (SIGUSR2)
ERROR => DpWpKill(2252, SIGUSR2) failed [dpxxtool.c   2468]
killing W2-3820 (SIGUSR2)
ERROR => DpWpKill(3820, SIGUSR2) failed [dpxxtool.c   2468]
killing W3-2264 (SIGUSR2)
ERROR => DpWpKill(2264, SIGUSR2) failed [dpxxtool.c   2468]
killing W4-732 (SIGUSR2)
ERROR => DpWpKill(732, SIGUSR2) failed [dpxxtool.c   2468]
killing W5-2268 (SIGUSR2)
ERROR => DpWpKill(2268, SIGUSR2) failed [dpxxtool.c   2468]
killing W6-2292 (SIGUSR2)
ERROR => DpWpKill(2292, SIGUSR2) failed [dpxxtool.c   2468]
killing W7-2300 (SIGUSR2)
ERROR => DpWpKill(2300, SIGUSR2) failed [dpxxtool.c   2468]
killing W8-2308 (SIGUSR2)
ERROR => DpWpKill(2308, SIGUSR2) failed [dpxxtool.c   2468]
killing W9-2316 (SIGUSR2)
ERROR => DpWpKill(2316, SIGUSR2) failed [dpxxtool.c   2468]
killing W10-1732 (SIGUSR2)
ERROR => DpWpKill(1732, SIGUSR2) failed [dpxxtool.c   2468]
killing W11-1704 (SIGUSR2)
ERROR => DpWpKill(1704, SIGUSR2) failed [dpxxtool.c   2468]
killing W12-2344 (SIGUSR2)
ERROR => DpWpKill(2344, SIGUSR2) failed [dpxxtool.c   2468]
killing W13-2352 (SIGUSR2)
ERROR => DpWpKill(2352, SIGUSR2) failed [dpxxtool.c   2468]
killing W14-2360 (SIGUSR2)
ERROR => DpWpKill(2360, SIGUSR2) failed [dpxxtool.c   2468]
killing W15-2368 (SIGUSR2)
ERROR => DpWpKill(2368, SIGUSR2) failed [dpxxtool.c   2468]
killing W16-1740 (SIGUSR2)
ERROR => DpWpKill(1740, SIGUSR2) failed [dpxxtool.c   2468]
killing W17-2384 (SIGUSR2)
ERROR => DpWpKill(2384, SIGUSR2) failed [dpxxtool.c   2468]
killing W18-2328 (SIGUSR2)
ERROR => DpWpKill(2328, SIGUSR2) failed [dpxxtool.c   2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:27 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long)               Tue Feb 27 07:31:27 2007
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA      936 Ended         no      1   0             0
1 DIA     2252 Ended         no      1   0             0
2 DIA     3820 Ended         no      1   0             0
3 DIA     2264 Ended         no      1   0             0
4 DIA      732 Ended         no      1   0             0
5 UPD     2268 Ended         no      1   0             0
6 UPD     2292 Ended         no      1   0             0
7 UPD     2300 Ended         no      1   0             0
8 ENQ     2308 Ended         no      1   0             0
9 ENQ     2316 Ended         no      1   0             0
10 BTC     1732 Ended         no      1   0             0
11 BTC     1704 Ended         no      1   0             0
12 BTC     2344 Ended         no      1   0             0
13 BTC     2352 Ended         no      1   0             0
14 BTC     2360 Ended         no      1   0             0
15 SPO     2368 Ended         no      1   0             0
16 UP2     1740 Ended         no      1   0             0
17 UP2     2384 Ended         no      1   0             0
18 UP2     2328 Ended         no      1   0             0
Dispatcher Queue Statistics               Tue Feb 27 07:31:27 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          13
wake_evt_udp_now     0
wake events           total     9, udp     7 ( 77%), shm     2 ( 22%)
since last update     total     9, udp     7 ( 77%), shm     2 ( 22%)
Dump of tm_adm structure:               Tue Feb 27 07:31:27 2007
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Tue Feb 27 07:31:27 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:32 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2244)
killing process (2244) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiSelClear: removed hdl 8 from selectset
DpDelSocketInfo: del info for socket 8 (type=8)
NiBufClose: clear extensions for hdl 8
NiBufSetStat: bufstat of hdl 8 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 8 / socket 1324
NiSelClear: removed hdl 4 from selectset
DpDelSocketInfo: del info for socket 4 (type=9)
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 1548
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (2216) (SOFT_KILL)
Stop icman
killing process (2220) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:2216 HANDLE:1568)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:33 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:2216 HANDLE:1568)
[DpProcDied] Process died (PID:2220 HANDLE:1560)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:34 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:35 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:36 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:38 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:39 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:40 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:41 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:42 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:43 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:44 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:45 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:46 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:47 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:48 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:49 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:50 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:51 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:52 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:54 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:55 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:56 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:57 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:58 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:01:59 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:00 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:01 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:02 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:03 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:04 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:05 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:06 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:07 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:08 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:09 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:10 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:11 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:12 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:13 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:14 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:15 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:16 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:17 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:18 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2244 HANDLE:1536)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1589
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Feb 27 13:02:19 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:2244 HANDLE:1536)
NiIMyHostName: hostname = 'hsdnt2400904'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name          -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/19
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 1540
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3816) [dpxxdisp.c   8495]
Good Bye .....
<b>Thanks in Advance,
Abhishek Srivastava</b>

Hi Matt,
I am pasting the contents of tha file dev_w0.
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Tue Feb 27 17:34:23 2007
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\HMI\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\HMI\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\HMI\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.39)
B New connection 0 created
M systemid   560 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    43
M intno      20020600
M make:      multithreaded, Unicode
M pid        2664
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2664) [dpxxdisp.c   1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm)          25008     (1316)
M DpShMCreate: sizeof(tm_adm)          2780232     (13832)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpShMCreate: sizeof(comm_adm)          290000     (580)
M DpShMCreate: sizeof(vmc_adm)          0     (372)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 04550040, size: 3207168)
M DpShMCreate: allocated sys_adm at 04550040
M DpShMCreate: allocated wp_adm at 04551B58
M DpShMCreate: allocated tm_adm_list at 04557D08
M DpShMCreate: allocated tm_adm at 04557D30
M DpShMCreate: allocated wp_ca_adm at 047FE978
M DpShMCreate: allocated appc_ca_adm at 04804738
M DpShMCreate: allocated comm_adm_list at 04806678
M DpShMCreate: allocated comm_adm at 04806690
M DpShMCreate: allocated vmc_adm_list at 0484D360
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0484D388
M DpShMCreate: allocated wall_adm at 0484D390
X
X Tue Feb 27 17:34:24 2007
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Feb 27 17:34:27 2007
M calling db_connect ...
C Got ORACLE_HOME=F:\oracle\HMI\920 from environment
C *** ERROR => Couldn't initialize Oracle Client Library
please check your installation
[dbsloci.c    8095]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1269]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9413]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server hsdnt2400904_HMI_00 on host hsdnt2400904 (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Tue Feb 27 17:34:27 2007
M * RELEASE     640
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        9589
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2664) [dpnttool.c   357]
Please help me out if you have any solution.
Regards,
Abhishek Srivastava

Error while applying leave request though poratl

Hi All,
In portal Employee is unable to apply any leave. The system is giving the error message as
"As per policy, Casual Leave cannot be taken for more than 1 working day consecutively,
Please utilise Privilege leave for this purpose. In case you do not have Sufficient PL balance, Please apply for LOA."
But when trying to raise a "Privilege/ Sick" leave , he is still getting the same message.
So he is not able to raise any kind of leave.
So can anyone please suggest a solution.
Regards,
Muni.

Hi Binu,
It is a Std error which you r getting in the system while maintaining EL on that day. Is 07.03.2012 is a paid holiday ?? Then it will give the same error while applying the leave on that day...
You need to check the Holiday class for that abs type in the system.
Regards,
Prasad Lad

Error in while applying database patchset

steps to upgrade EBS database from 9.2.0.6 to 10.2.0.2
while applying this patchset p4547817_10202_LINUX.zip
i am getting error like
[oradev@sql Disk1]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-07-13_06-59-10PM. Please wait ...[../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/filegroup2.jar]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
note: ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/filegroup2.jar may be a plain executable, not an archive
Error in writing to directory /tmp/OraInstall2009-07-13_06-59-10PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
**Even though /tmp has more than enough space, and I have changed all the
**permissions for /tmp recursively to 777

Hi,
End-of-central-directory signature not found. Either this file is nota zipfile, or it constitutes one disk of a multi-part >archive. In thelatter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
note: ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/filegroup2.jar may be a plain executable, not an >archive
Error in writing to directory /tmp/OraInstall2009-07-13_06-59-10PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.Can you please run the installer in debug mode to know the exact problem you can do the same by
runInstall -debug*
and paste the error than.
Thanks,
Anchorage :)

Premiere Pro CC 2014 very unresponsive while rendering on background with Adobe Media Encoder

Usually while I eddit videos on Premiere, I'm rendering on the background with AME. Or at least I used to. Some time ago, this process suddenly stopped working, as rendering on the background bagan to make Premiere really unresponsive, and quite impossible to work with. I couldn't think of any change I made other than switching my HDD, and I blamed it on that (it made sense because new HDD is one of those WD Green ones, a little worse than my old Seagate one). So I adapted to just queueing everything and start rendering when I was done edditing. But yesterday I installed a 240gb Kingston HyperX SSD, re-installed Windows and the main apps on it, and tried again, hoping to see an improvement. Now I was storing the original media on the HDD, running OS, Premiere and AME on the SSD, and rendering to the HDD. It did not work. Premiere still became slow while I rendering with AME. So I thought it might get better if the HDD was not reading and writing at the same time, and I switched the original media to the SSD, while still rendering to the HDD. Also didn't help. I don't know why this setup suddenly does not work, and I really need to fix it.
My setup:
Windows 7 Home Premium 64bit
Intel Core i7 2600 @ 3.4GHz
12GB of RAM
nVidia GeForce GTX 560 (yes, drivers are up to date)
Dual monitors (one for Premiere workspace and one for a bigger program monitor)
2TB WD Green HDD where I keep most of my junk (and media files)
240GB Kingston HyperX SSD where I run the OS and important apps (Premiere and AME included)
I'm running Adobe Premiere Pro CC 2014 (8.1.0 build) and AME CC 2014 (8.1.0.122 build)

Hi chriscorrell,
Thank you for posting on Adobe forums.
Upgrading your OS might be a good idea because Premiere CC 2014's OS requirement is OS X 10.8.
See here: System requirements | Adobe Premiere Pro
Thanks,
Rameez

Why does Firefox on my Windows 7 PC hang (become unresponsive) while it waits for most pages to load or run scripts?

Firefox hangs (becomes unresponsive) when accessing many sites including Gmail. Eventually, when hung, Firefox will throw up a window saying "WARNING: A script has become unresponsive" or, in the case of Gmail, the page itself will say "Some Gmail features have failed to load due to an internet connectivity problem."
IE8 and Google Chrome are working normally. I've tried Firefox in safe mode, re-installing and even running Firefox portable from a USB thumb drive. Each time with the same result—Firefox hangs or becomes unresponsive while it waits for most pages to load or run scripts.
#### PC Workstation Environment ####
Firefox 13.0.1
Windows 7
Symantec Endpoint Protection 11.0.6200.754
--

Your problem sounds like the one that a co-worker and I started to have about the same time. Check your Symantec client management control log. You might see a line like the following.
Date and Time Severity Level Action Test / Production Description API Class Rule Caller Process ID Caller Process Parameter User
2012-07-30 10:48:09 AM 15 Block Production Unauthorized NT call rejected by protection driver. System Built-in rule 1608 FlashplayerPlu FuncID-B6H, R... None
At first we thought that it was a Javascript problem until we noticed this log. The key words are 'Block' and 'FlashPlayerPlu'. This problem recently started for us, perhaps with a software push 1-2 weeks ago. Internet Explorer does not hang when accessing pages with Flash.
The Flash page does eventually load after a long time. However, since the whole browser hangs for a while, for the most part having the Flash plugin enabled makes Firefox unusable if accessing pages with Flash.
Disabling the Flash plugin solves the hanging problem, but I do not know what is causing the problem, nor do I know when a combination of Windows 7, Flash, and Symantec will work. Your later version of Symantec shows that we might have the problem for a while, but I do not know what customization CSC did with Symantec. My coworker did run a complete virus scan, uncovering nothing. Another co-worker is running Windows XP. She does not have the problem, but I do not know what other versions of software she is running.
Symantec Endpoint Protection version 11.0.6100.645
Flash version 11.3.300.268
Firefox version 14.0.1
Windows 7 32-bit service pack 1

Problem: Mixed Exchange 2007 / 2013 CAS Servers with wildcard certificates in Europe and non-wildcard Certficate in China

Hi,
we have following problem. We have a mixed multi-domain one-forest AD environment. We also have still a mixed exchange 2007 / 2013 environment. We also have different CAS Servers for 2007 SP3 (RU15) and 2013 (CU8) in europe and one 2007 SP3 (RU15) CAS Server
in China, because of bad connection to Europe. For the Migration to 2013 in Europe we installed a wildcard-certificate *.xyz.com and used the Set-OutlookProvider EXPR -CertPrincipalName msstd:*.xyz.com, so the wildcard certificate is accepted. Everything in
Europe works fine, inside and outside also between exchange 2007 and 2013 (both CAS Server 2013 and 2007 use the same wildcard certificate). But since the change of the Set-OutlookProvider EXPR we are facing problems with our CAS Server in China, because this
server has a different non-wildcard certificate and a different domain name (cas-server.xyz-china.com instead xyz.com). Now we have the problem that this Chinese CAS server the Outlook Anywhere does not work anymore and prompts always for the username. As
I see it is because of the EXPR change. Is it possible to set the the Outlook-Provider EXPR per Cas-Server ? (They also have their own Autodiscover on this front-end server). Because I see that the Outlook-Provider can only be stored forest-wide.
If not the other solution would be to register the chinese cas server in our xyz.com domain and use the same wildcard certificate on this system right ?
Any help would be appreciate….

Yes setting the EXPR value is most likely the cause of your issue. When you set this value you are telling Outlook to only accept connections from connections that have the cert with the subject name you specify here.
Unfortunately, based on my experience I believe this is an organization wide setting and cannot be configured on a CAS by CAS basis (If I'm wrong someone please keep me honest :)).
So the only option would you have is to change all the URLs to be on *.xyz.com domain. There's no need to change the domain the server actually resides on. The other option would be to purchase a UCC Cert with all the names you need and apply
to all your CAS servers and reset the EXPR value.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

An error occurred while applying SQL script for the feature BackendStore. For details, see the log file

Hello
i got this error in step2
Error: An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][09_05_16].log'
here is full summary
> Bootstrap-CsComputer
Logging status to: C:\Users\administrator.RCC\AppData\Local\Temp\2\BootstrapFull-[2013_09_23][12_17_37].html
Checking prerequisites for bootstrapper...
Checking prerequisite WMIEnabled...prerequisite satisfied.
Checking prerequisite NoBootstrapperOnBranchOfficeAppliance...prerequisite satisfied.
Checking prerequisite SupportedOS...prerequisite satisfied.
Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
Host name: lync.rcc.local
Disabling unused roles...
Executing PowerShell command: Disable-CSComputer -Confirm:$false -Verbose -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Disable-CSComputer-[2013_09_23][12_17_46].html"
Checking prerequisites for roles...
Checking prerequisite SupportedOS...prerequisite satisfied.
Checking prerequisite SupportedOSNoDC...prerequisite satisfied.
Checking prerequisite SupportedSqlRtcLocal...prerequisite satisfied.
Checking prerequisite WMIEnabled...prerequisite satisfied.
Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
Checking prerequisite PowerShell...prerequisite satisfied.
Checking prerequisite WindowsIdentityFoundation...prerequisite satisfied.
Checking prerequisite SupportedServerOS...prerequisite satisfied.
Checking prerequisite NoUnsupportedWinFab...prerequisite satisfied.
Checking prerequisite SupportedSqlLyncLocal...prerequisite satisfied.
Checking prerequisite SupportedSqlRtc...prerequisite satisfied.
Checking prerequisite IIS...prerequisite satisfied.
Checking prerequisite IIS7Features...prerequisite satisfied.
Checking prerequisite ASPNet...prerequisite satisfied.
Checking prerequisite KB2646886Installed...prerequisite satisfied.
Checking prerequisite BranchCacheBlock...prerequisite satisfied.
Checking prerequisite WCF...prerequisite satisfied.
Checking prerequisite WindowsMediaFoundation...prerequisite satisfied.
Checking prerequisite SqlInstanceRtcLocal...prerequisite satisfied.
Checking prerequisite VCredist...prerequisite satisfied.
Checking prerequisite SqlNativeClient...prerequisite satisfied.
Checking prerequisite SqlClrTypes...prerequisite satisfied.
Checking prerequisite SqlSharedManagementObjects...prerequisite satisfied.
Checking prerequisite UcmaRedist...prerequisite satisfied.
Checking prerequisite WinFab...prerequisite satisfied.
Checking prerequisite MicrosoftIdentityExtensions...prerequisite satisfied.
Checking prerequisite SqlInstanceLyncLocal...prerequisite satisfied.
Checking prerequisite SqlInstanceRtc...prerequisite satisfied.
Checking prerequisite RewriteModule...prerequisite satisfied.
Checking prerequisite SpeechPlatformRuntime...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_ca-ES_Herena...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_da-DK_Helle...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_de-DE_Hedda...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-AU_Hayley...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-CA_Heather...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-GB_Hazel...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-IN_Heera...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-US_Helen...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_es-ES_Helena...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_es-MX_Hilda...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_fi-FI_Heidi...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_fr-CA_Harmonie...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_fr-FR_Hortense...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_it-IT_Lucia...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_ja-JP_Haruka...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_ko-KR_Heami...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_nb-NO_Hulda...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_nl-NL_Hanna...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_pl-PL_Paulina...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_pt-BR_Heloisa...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_pt-PT_Helia...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_ru-RU_Elena...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_sv-SE_Hedvig...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_zh-CN_HuiHui...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_zh-HK_HunYee...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_zh-TW_HanHan...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_ca-ES_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_da-DK_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_de-DE_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-AU_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-CA_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-GB_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-IN_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-US_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_es-ES_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_es-MX_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_fi-FI_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_fr-CA_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_fr-FR_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_it-IT_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_ja-JP_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_ko-KR_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_nb-NO_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_nl-NL_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_pl-PL_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_pt-BR_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_pt-PT_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_ru-RU_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_sv-SE_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_zh-CN_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_zh-HK_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_zh-TW_TELE...prerequisite satisfied.
Checking prerequisite UcmaWorkflowRuntime...prerequisite satisfied.
Installing any collocated databases...
Executing PowerShell command: Install-CSDatabase -Confirm:$false -Verbose -LocalDatabases -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Install-CSDatabase-[2013_09_23][12_17_52].html"
An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][12_17_54].log'
what should i do?
Please help me

Hi,
The issue may be related to disk read and write cache. Here is a similar case for your reference:
http://blog.kloud.com.au/2013/07/15/publish-lync-2013-with-2012-r2-preview-web-application-proxy/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

Problem while applying configuration to SCE 8000 using SCE-API

We are facing an issue while applying service configuration to SCE 8000 device using SCE API supplied by CISCO.
We have sample .pqb file which we are using to upload to SCE 8000. We are using 3.5.5 version of firmware on SCE.
Attached is exception file which contains sample .pqb and trace log that we see when we apply configuration. Please note, that we are using RHEL5 platform, JDK 1.5.0_1 and standalone java program to apply configuration on SCE using API
com.pcube.management.common.InvocationException: null ### java.lang.NullPointerException java.lang.NullPointerException
         at com.pcube.management.framework.fsmanager.RFileInputStream.close(RFileInputStream.java:240)
         at java.io.BufferedInputStream.close(BufferedInputStream.java:440)
         at com.pcube.apps.engage.management.Utilities.copyDeviceToLocalRMI(Utilities.java:357)
         at com.pcube.apps.engage.policy.ConfigurationRetriever.retrievePolicy(ConfigurationRetriever.java:85)
         at com.pcube.apps.engage.policy.Test.fetchPpUpgradeVersion(Test.java:15)
         at com.elitecore.pm.SCEConfiguration.main(SCEConfiguration.java:460)
com.pcube.management.common.InvocationException: null ### java.lang.NullPointerException java.lang.NullPointerException
failed to fetch current pp upgrade version listjava.lang.NullPointerException0.0.0 PP0com.pcube.apps.engage.common.ApplyException: Client version 3.5.5 PP20 is different than SCE version 0.0.0 PP0, therefore apply is not allowed
        at com.pcube.apps.engage.policy.SEPolicyMediator.checkPpVersion(SEPolicyMediator.java:335)
         at com.pcube.apps.engage.policy.SEPolicyMediator.applyPolicy(SEPolicyMediator.java:114)
         at com.pcube.apps.engage.policy.SEPolicyMediator.applyPolicy(SEPolicyMediator.java:95)
         at com.elitecore.pm.SCEConfiguration.main(SCEConfiguration.java:461)
com.pcube.management.common.InvocationException: null ### java.lang.NullPointerException java.lang.NullPointerException
         at com.pcube.management.framework.fsmanager.RFileInputStream.close(RFileInputStream.java:240)
         at java.io.BufferedInputStream.close(BufferedInputStream.java:440)
         at com.pcube.apps.engage.management.Utilities.copyDeviceToLocalRMI(Utilities.java:357)
         at com.pcube.apps.engage.policy.ConfigurationRetriever.retrievePolicy(ConfigurationRetriever.java:85)
         at com.pcube.apps.engage.policy.Test.fetchPpUpgradeVersion(Test.java:15)
         at com.elitecore.pm.SCEConfiguration.main(SCEConfiguration.java:460)
com.pcube.apps.engage.common.ApplyException: Client version 3.5.5 PP20 is different than SCE version 0.0.0 PP0, therefore apply is not allowed
        at com.pcube.apps.engage.policy.SEPolicyMediator.checkPpVersion(SEPolicyMediator.java:335)
         at com.pcube.apps.engage.policy.SEPolicyMediator.applyPolicy(SEPolicyMediator.java:114)
         at com.pcube.apps.engage.policy.SEPolicyMediator.applyPolicy(SEPolicyMediator.java:95)
         at com.elitecore.pm.SCEConfiguration.main(SCEConfiguration.java:461)

You are likely hitting CSCtb94072.
The policy file should be manipulated by development engineer.
Please open a case with TAC and ask the CSE to fix the policy (by getting development engineer assistance).
Once you have the fixed policy PQB file perform the following CLI procedure on all SCEs on which the problem was observed:
SCE2000>enable
Password:
SCE2000#cd engage
SCE2000#delete MYENGAGE.PQB
SCE2000#rename MYENGAG1.PQB MYENGAGE.PQB
SCE2000#
Once done you should be able to apply the fixed policy without any issue.
Note: after performing the above CLI procedure, you can also successfully retrieve the policy,
however, you must avoid doing it since the retrieved poilcy would not be the last applied one, it would be the penultimate one which you probably don't want to use.
After applying the fixed policy, you should be able to retrieve policy successfully with no fear.
====
This is more of a clarification regarding the workaround procedure:
To get you better understand the issue.
The last policy applied to the SCE successfully is kept under the SCE "/engage" directory by the name MYENGAGE.PQB
The penultimate applied policy is also kept there under the name MYENGAG1.PQB
When the SCA-BB GUI applies a policy it first verifies the matching SCA-BB and PP version by inspecting this MYENGAGE.PQB file.
If the file has the corruption dealt in this defect, the apply will fail with the message of the kind:
"Client version 3.5.5 PP18 is different than SCE version 0.0.0 PP0, therefore apply is not allowed"
The MYENGAG1.PQB is the penultimate applied policy and it's not corrupted, renaming it MYENGAGE.PQB will assure us that the apply operation won't fail when verifying the versions are matched.
Alternatively (for the renaming procedure) user may copy the fixed policy file into the SCE disk space under /engage directory and name it MYENGAGE.PQB, then the apply should also work fine.

Exclude Weekends and Holidays while applying for leave...

Hi,
Could anyone help me out in excluding holidays while applying for leave via absence management (employee self service) in R12? While clicking on calculate duration it includes weekends as well by default. Since updating the formula BG_ABSENCE_DURATION will involve creating UDTs, modify UDF and additional effort; I tried creating workschedulle and updated the profile HR: Schedule Based Absence Calculation to 'Yes' following the metalink note 'Schedule Based Absence Calculation in Self Service' [ID 437083.1] but no luck. Is there any other additional setup that needs to be done or its better to update Fast Formula. Kindly advise on the same. Thanks in Advance!!!
Thanks,
Ahmed

Thanks much Gaurav. I was able to work it out by creating work schedule itself. I reckon I missed out selecting the schedule pattern. We need to ensure that after creating schedule the pattern needs to be selected and launched. After a while it gets effected in the system. Just in case if others are trying to implement work schedule for working days between Saturday to Wednesday following are the step involved. I have created two schedule pattern with day start as 1 and day stop as 4; and another pattern with day start as 7 and day stop as 7. It works like charm....:)
Regards,
Ahmed

CAS servers became unresponsive while applying rollup 7

Similar Messages

Maybe you are looking for