Cascading picklist

hi
i have created one cascading picklist.parent picklist have the predefault value based on country field in User entity.child picklist values based on parent picklist value selection.parent picklist not exposed in UI.
The problem is whenever creating a new record the child picklist shows all values regardless of the parent picklist value.
But when editing the existing record it works fine.
Any suggesstions..?
regards
sowm

Could you please see, While creating what is the value pf parent picklist?
If Parent value is blank then child (cascaded) picklist will show all values.
Once you change/ select value in parent picklist, it should reflect the corresponding value in child.
Dinesh

Similar Messages

  • Best Practices to update Cascading Picklist mapping for Account record type

    1. Most of the existing picklist values name in parent and related picklist has been modified in external app master list, so the same needs to be updated in CRMOD.
    2. If we need to update picklist value, do we need to DISABLE the existing value and CREATE a new picklist.
    3. Is there any Best Practices to avoid doing Manual Cascading picklist mapping for Account record type? because we have around 500 picklist values to be mapped with parent and related picklist.
    Thanks!

    Mahesh, I would recommend disabling the existing values and create new ones. This means manually remapping the cascading picklists.

  • OnDemand CRM - Sales Stage Cascading Picklists?

    I have a problem in that sales stages for one opportunity type are not the same as the other opportunity types.  I am trying to standardize these values.  I am also unable to modify the sales stage.  I suspect that this has something to do with the standard reports.  But I am unable to determine how these were modified at one point.  Could an upgrade have broken this?  Also, cascading picklists do not seem to be set up so I have no idea where to go with this.  Any suggestions?

    Dear User,
    Thanks for using Oracle communities.
    I did not got your problem fully but what I got is, you are not sure form where to modify opportunity stages.
    I think this is picklist, then you need to determine picklist type and modify the values for that type from list of values. You can find same in Administration - Data > List of values.
    I hope it helps.
    Best Regards,
    Chetan

  • Cascading picklists and lists

    I have made use of cascading picklist, but have hit a problem. Assume I have a cascading picklist from field A to field B. I now build a list that contains fields A and B. When I try use in-line editing to change field B in the list, I get a browser error (yellow triangle in lower left corner of the browser with "Error on page"). Is this expected behavior? My work around is to open the record, make the edit, and return to the list (lots of clicks).
    Jeff

    This is what I received from Customer Care:
    This is a browser error. Please try this to troubleshoot your browser: A. 1. Go to www.google.com and search for "download Java". 2. Install or upgrade Java Sun B. 1. Open an IE page 2. Click on Tools / Internet Options 3. Click on Delete.. button (under Browsing history) 4. Click on Delete Files and Delete Cookies. 5. Click on Close. 6. Click on Security tab and then select Trusted Sites and click the Sites button. 7. Uncheck the box for Require Server Verification option and add the following as trusted sites: *.crmondemand.com , *.oracle.com , *.oraclecorp.com 8. Click Close 9. Click on Privacy tab 10. Uncheck the Pop-Up Blocker 11. Click on Advance Tab 12. Uncheck Use TLS 1.0 option. 13. Check Enable third-party browser extensions check-box under Browsing section 13. Click Apply then OK 14. Close all your browsers and reopen an IE page. C. Go to Start, Control Panel, Java, Settings, Delete Files.
    It didn't work. Any ideas?

  • No Picklist to select from when relating cascading picklists

    Hi all!
    I am trying to do something really straight forward: Relating two picklists for cascading behaviour. The problem is: I am not getting any picklist to choose from in step 2.
    I am using CO 3 and working in a non PRD environment.
    Has anyone an idea why this is happening?
    Thanks in advance
    JC

    Try these
    PRAM Reset: http://docs.info.apple.com/article.html?artnum=2238
    SMC Reset: http://support.apple.com/kb/HT3964

  • Using Cascading picklist .. is this possible ..

    The parent picklist consists of several values, let's call them A B C D E and F.
    I only want the subordinate picklist to have values for the parent of E and F. I don't see a way to define the parent of A-D with no values for the related picklist. Am I missing this ?? It would be nice to also have the child picklist only valid when item E or F was selected.
    Any thoughts ?

    Although that is not what I would have like to hear .. thanks for the answer. I must have been thinking of something else (perhaps another product) where the child picklist would only be enabled if certain parent values were selected.

  • How to add new picklist value to states and countries to Address object

    Hi,
    I like to query and update picklists, state and country, in the address. What're the record type and filed name for them?
    I tried record type, Address and field name, State and Country, with no luck.
    Thanks

    Hi,
    As far as I know you cannot modify the address object at this point of time.
    If you want to add values or modify the picklists for State & Country, you would need to use custom fields and add all required values and then use those fields. (You can remove the Addres Object completely from the layout and then substitue it with the custom picklists that you have designed - possibly cascading picklists with Country as parent and State as child )
    Hope it helps.

  • More than 1,000 values in a picklist

    Hello
    Does any one has a solution or a workaround? In release 15 I used to add more than 1000 values to a picklist throught import (csv) but now in release 16 this bug has been corrected, I tried also throught web service and now it is not possible. The problem here is that I need to add more than 1000 values to a picklist (town) and use it in a cascading picklist, I'm not able to use dynamic layouts because they are used for anther field that it is really important too.
    I need this because in Mexico we have state and municipality (city hall, town); each state has certains towns and this field could not be captured by the user because it is a key field.
    Can you help me please? Any suggestion you might have please let me know.
    Regards Catalina Valadez

    This is a helpful answer but I have a doubt, example picklist 1 "country" = Mexico, picklist 2 "state"= DF, NUEVO LEON, CAMPECHE, SONORA, SINALOA ....... but with customobject it wont be possible to filter de Municipality in order to appears just the town's related with Nuevo Leon, or just the town's releated with Campeche.
    Regards Catalina

  • Picklist field

    Hi,
    In your implementations, have/had you a picklist field with more than 1000 values (active+disabled)? ..at any time (../R12/13/14/)
    Paddy

    At times using Cascading Picklist can change 1000 values to 10 + 100 or 30 + 30 or may be 100 + 10 values making it easy for the users.
    Maybe a Custom Object can also help.
    - Prakash

  • All picklists for Contact, Opty, Lead, Activity objects - Exported to exter

    We have a requirement for extracting all picklists to an external database on a daily basis. We would like to use the Web Services to do that. We have no cascading picklists. We would like to use English and French languages (if not possible to haev English and French side by side, then English alone would be ok). Initial snapshot would take everything and then, only records which have been modified since last time data was extracted (if possible).
    It would be nice to have the external table look like:
    Object
    Field Name
    Value English
    Value French
    Enabled flag
    Date CRMOD created
    Date CRMOD modified
    1) What would be the WS call(s) to achieve initial extract?
    2) Can we extract for all objects at once or do we have to go object by object?
    3) What would be the WS call(s) to get records that would have changed since last time?
    Thanks

    The web service for this is in the services WSDL. Its a pretty straight forward SOAP message with only a few parameters to set.
    From the web services guide:
    Support for Multi-Select Picklists
    A multi-select picklist is a picklist from which the user can select multiple values. In Web Services
    On Demand, multi-select picklists are only exposed for the following record types:
    ■ Account
    ■ Activity
    ■ Contact
    ■ Custom Object 01
    ■ Custom Object 02
    ■ Custom Object 03
    ■ Lead
    ■ Opportunity
    ■ Service Request
    For these record types, all standard and custom multi-select picklist fields are exposed. You can add,
    remove, replace or query selections in parent-level multi-select picklist fields, however child-level
    multi-select picklist fields are not supported.
    Input and output values are language-independent code (LIC) delimited, but the multi-select picklist
    delimiter is always a semicolon regardless of locale for input and output: <LIC1>;<LIC2>.
    I hope this helps

  • Dynamic Picklist content.

    Hi all, I would like to have the content of a pick list controlled by the active Page Layout for an object. E.g.
    When Role 1 opens the object the field 1 pick list should have values A and B.
    When Role 2 opens the object the field 1 pick list should have values C and D.
    Is this possible and how?
    I was thinking of cascading pick lists but I don't want the user to have to select the parent value. This should be pre selected by the role accessing the object and I guess this could be done in the object page layout connected to the role accessing the object.

    Well we have implemented the below requirement as follows in our project:
    We have a read-only custom picklist field 'Role' . The values of the picklist are Role 1 and Role 2. The validation on this field = Jobtitle(). While creating the User, we mention the Job Title same as Ondemand Role.
    Now we have created Cascading picklist between Read-only field 'Role' and Action picklist (having values A,B,C,D).
    Hope this helps.
    Sandy

  • Any way to upload mapping for dynamic picklists.

    Hi,
    We have a requirement where parent picklist (p1) is having 1000+ values and we have to define cascading picklist between p1 and another picklist p2. To define the mapping between these two there will be so much manual work as we have to define the mapping 1000+ time. So is there any way to upload that mapping?
    Thanks
    Saurabh

    Hi, There is no import facility available. But you can write a webservices program if it has to periodically updated and maintained
    -- Venky CRMIT

  • How to limit the visibility of records of product?

    Hello,
    I would like to restrict access to a range of products. Specifically, the company has different departments (different OD CRM users), and depending on the department to which it belongs is requested or not the visibility of the products.
    I tested with groups shared computer, books, and permission level roles, but the Product entity does not have any of these options ...
    In CRM On Demand Administration forum suggest me the following:
    "if you clicked on a weblink in the opportunity object which could bring up a new window via a custom web service program and in the new window you could do a search of products. The web service program could determine the user and department and control which products are available."
    I have the following doubts:
    1) How can I call a WS via a pop window?
    2) In a WS I can search products, but how can I control the access/visibility of products over CRM OD with the custom WS program? Because in the Product WS I think the only operations allowed are: Execute, Insert, Update and Delete records.
    Thank you and regards.

    Hi,
    If you just wanted to restrict the search resuilt when you select product on opportunity page, I dont think you have to use web services, my recommendation is using report with Javascripts;
    You can do a report with product name, department, and other fields you need. then you put javascripts in the report with Static Text function, this java script is to simulate a cascading picklist, you first select department, then you select prodcut, the listed products will be only within this department. and another function of this java scripts is after you select the product, the product will be auto-fill into product field on your opportunity or product revenue page.
    you also need a weblink to show this report on your opportunity or product revenue page, so that you can do the search/product select.
    you could also put a filter in the report, eg, the department which the current login use belongs to, then when the use select the product from the weblink, it will be only the products they shoud see.
    I havn't done this on product object, but I did this rescrition on other objects, it works. if you need some sample code of javascript, let me know I will send to you.
    Hope it is helpful.

  • Help on UpdateCascadingPicklists in Web Services v2.0

    Hello All,
    I have a problem when trying update child picklist values,using UpdateCascadingPicklists API it is over writting old picklist values.But I just want to add the new values.Is it possible ,If possible how? I set CreateNew Argument to "N".
    what happens if CreateNew Argument set to "Y"?
    Any Clues?
    Sandra.

    Thank You for your response Jaya.
    You mean it will create new (child) picklist values in On Demand or adding new values to child?
    For Example :
    P1 and P2 are parent and child picklist.(Both are cascade picklists)
    P1 has a feild BMW,TATA,Infinity...
    P2 has these set of values 1 series,3 series,7series,Indica,Infinity SN1,InfinityFVI,.... values
    BMW cascade with 1 series,3 series,7series
    Now for BMW I want to add a new value "8 series"
    If I set CreateNew to "N" for UpdateCascadingPicklists API, It will over write old values and shows only "8 series".
    But For BMW I want to see all these values : 1 series,3 series,7series,8 series
    Is it possible by UpdateCascadingPicklists API?
    Regards,
    Sandra.

  • Product selection filtered by a category

    Hello,
    When adding a product to an opportunity, the lookup for products shows all the products and then we can filter it by a specific category.
    We shall have around 2000 products...
    a) Would the lookup be slow ?
    b) we´re studying the possibility of having the user first select a Product Category and then when clicking in the lookup for Products, the list would be shown just for that category select (similar to the concept of cascading picklists).
    Would that be possible ?
    Txs. for any help
    Antonio

    Hi Lombo,
    You can goto "Admin/Application Customization/product/Product Lookup Window Setup"
    and uncheck "Execute Default List on Lookup Window"(If the option is not selected, no records are displayed when the Lookup window is opened.)
    For the options to take effect, you must sign out of the application and sign in again.
    Hope this will help U.

Maybe you are looking for