Case-endcase use with Radio button ...

Hi,
I am writing a small ABAP report.
It has following selections:
Parameter1
Parameter2
Radio1
Radio2
Radio3
Now after I finish complete selection.
Function module DB_GET_TABLE_FIELDS uses parameter 1.
I have done till this part.
Now, after this parameter2 should get concatenated with
'ABC' if radio1 or
'XYZ' if radio2 or
'LMN' if radio3.
How can I do this using case-endcase ?
Regards,
Rajesh.

Hello Rajesh
I have seen quite a few times the following coding within the SAP standard:
CASE 'X'.
    WHEN radio1.
    WHEN radio2.
    WHEN radio3.
    WHEN others.
    ENDCASE.
Needless to say that this is ugly programming.
Regards
Uwe

Similar Messages

Using the radio button component to go to a frame on a MovieClip

hello,
I am using the radio button component in Flash with a continue button.
When the user clicks their option in the radio button and then clicks continue, I want it to go to a movieClips Specific frame.
Here is the breakdown and the script I have so far is below.
The radio group os named RadioButtonGroup
The instance names for each of the three options are noviceButton,intermediateButton,expertButton
My continue button has an instance name of continueButton
and my movie clip I am trying to target has an instance name of level_mc
here is my code so far:
continueButton.enabled=false
noviceButton.addEventListener(MouseEvent.CLICK, revealContinue);
intermediateButton.addEventListener(MouseEvent.CLICK, revealContinue);
expertButton.addEventListener(MouseEvent.CLICK, revealContinue);
function revealContinue(evt){
continueButton.enabled=true;
continueButton.addEventListener(MouseEvent.CLICK, clickContinue);
function clickContinue(evt){
var frameNumber=mc_levels.Number(noviceButton.group.selectedData)
gotoAndStop (frameNumber);
the problem starts with my varFrame line-I don't know how to get it to go to the movieClip and gotoAndStop at a specific frame, based on which radio button was clicked and after the continue button is clicked.
Does anyone out there have any ideas?
thanks
babs

use:
continueButton.enabled=false
noviceButton.addEventListener(MouseEvent.CLICK, revealContinue);
intermediateButton.addEventListener(MouseEvent.CLICK, revealContinue);
expertButton.addEventListener(MouseEvent.CLICK, revealContinue);
function revealContinue(evt){
continueButton.enabled=true;
continueButton.addEventListener(MouseEvent.CLICK, clickContinue);
function clickContinue(evt){
var frameNumber=mc_levels.Number(noviceButton.group.selectedData)
level_mc.gotoAndStop (frameNumber);

How do I move a table with radio buttons to another page?

I created a document in Word, converted to PDF, added a page (which was created in Adobe Forms Central, only way to get a table with radio buttons - see below for example).
The issue I have is whilst using the Trial of Adobe XI Pro I was able to move this table up a page and place it under the header. Now that the trial has run out I cannot complete this task with other documents.
I started to edit using LiveCycle but it won't let me move the table.
We have Acrobat X Pro but when I go to edit, it directs me to edit in LiveCycle. I have tried moving the table using all of these programs. Can anyone help/guide please?

Thank you for your reply. I am new to editing a pdf and using these programs. I have subscribed to Acrobat XI Pro. When I try to edit the document it directs me to LiveCycle. I cannot move the table in LiveCycle. It won't let me, and I cannot make changes in XI Pro as I did in the trial as it directs me to edit in LiveCycle. Am going in circles.

ADF 11g Row Selection in a Table with radio button

Hi there,
I need to select one row with a radio button and then take some action on those rows via command buttons.
I need to use a Radio Button and not the table property rowSelection provided with the latest features of ADF 11g.
In ADF 10g you can use tableSelectOne component that missing in 11g. How you can implement that with ADF 11g?
Regards, Alex

Well, ADF 11g doesn't have that capability, so you have to build it yourself. If don't want to build it yourself, you could use the Trinidad components instead of ADF 11g. If you don't want either of those options, then sorry :)
John

Replacing SAP Object Selector with Radio Button in ALV table in WD ABAP

Hi All,
I have a view in Webdynpro ABAP which displays data in an ALV table view (using SALV_WD_TABLE component).
By default we have the SAP Object Selector for selecting a particular row of the table. This has to be replaced with radio buttons.
I mean instead of using the SAP Object Selector, I need radio buttons at the start of each row.
What I have thought of is to make the SAP Object Selector Invisible and create another attribute for the radio button in the node which contains ALV output data.
Can you please let me know how to remove the SAP Object Selector from ALV output table and also how to include a column with radio button in the ALV output table.
Thanks and Regards,
Sayan Ghosh

Hi Lekha,
I am working with HRASR00_PROCESS_EXECUTE WD component of MSS application. In order to generate the data, this in turn calls another component called DATAOBJECTPROVIDER. I need to make the table selection as none and replace the SAP Object Selector with the radio button.
Do you know under which method in DATAOBJECTPROVIDER do we need make the changes. I tried to search all the methods but couldnt understand a suitable one.
Thanks and Regards,
Sayan Ghosh

Popup window with radio button-urgent

Hi..
Is ther any functionmodule for dispalying a popup window with radio button ....

Use This
K_KKB_POPUP_RADIO2
I_TITLE   ...                      This is the title
I_TEXT1   ...                      first radio button
I_TEXT2    ...                     second radio button
I_DEFAULT     ...                  default
reward if useful
Amit Singla

I want to build a form with radio buttons to limited clients ticking every option.

I want to build a form with radio buttons to limited clients ticking every option. I have a range of products and in order to quote accurately I want to get specific information.

If I get this , you want to show form options to specific clients not to all site viewers ?
You would need to create a secure zone for this where permitted viewers can login and view the form with all options , in form itself we cannot setup this as few customers will view other options and others will view a different one.
This can be done from your hosting end. Or if you are using Adobe server for hosting then you can create some profiles for customers and then setup a separate form altogether to achieve this.
Thanks,
Sanjit

How to render radiogroup with radio buttons spread out across 2 columns

Hi,
I would like to render the following html using JSF (Renderer ??). How do I do that ?
Basically it has a radiogroup with radio buttons spread out across 2 columns. and with an
attached input text box along with
the label for each radiobutton in the radio group.
Any pointers or examples I can look at to do something like this is appreciated.
<selectOneRadio does not achieve my functionality nor does MyApacheFaces with a layout="spread" option.
TIA,
Vijay
Here is the html source for what i want to achieve:
<TABLE border="0" cellpadding="0" cellspacing="1">
     <TBODY>
          <TR>
               <TD></TD>
               <TD><span id="searchForm:searchText1">Application Number</span></TD>
               <TD></TD>
               <TD><span id="searchForm:searchText2">Agreement Number</span></TD>
          </TR>
          <TR>
               <TD><input type="radio" id="searchForm:customerSearchRadioGroupId" value="applicationNumber"/></TD>
               <TD><input type="text" id="searchForm:applicationNumberId" value=""/></TD>
               <TD ><input type="radio" id="searchForm:customerSearchRadioGroupId" value="agreementNumber"/></TD>
               <TD><input type="text" id="searchForm:agreementNumberId" value=""/></TD>
          </TR>
          <TR>
               <TD></TD>
               <TD><span id="searchForm:searchText3">Infolease Cust.#</span></TD>
               <TD></TD>
               <TD><span id="searchForm:searchText4">eCredit Cust.#</span></TD>
          </TR>
          <TR>
               <TD><input type="radio" id="searchForm:customerSearchRadioGroupId" value="infoLeaseCustNumber"/></TD>
               <TD><input type="text" id="searchForm:infoLeaseCustNumberId" value=""/></TD>
               <TD ><input type="radio" id="searchForm:customerSearchRadioGroupId" value="eCreditCustNumber"/></TD>
               <TD><input type="text" id="searchForm:eCreditCustNumberId" value=""/></TD>
          </TR>
          <TR>
               <TD></TD>
               <TD><span id="searchForm:searchText7">Client Number</span></TD>
               <TD></TD>
               <TD><span id="searchForm:searchText8">Customer Name</span></TD>
          </TR>
          <TR>
               <TD><input type="radio" id="searchForm:customerSearchRadioGroupId" value="clientNumber"/></TD>
               <TD><input type="text" id="searchForm:clientNumberId" value=""/></TD>
               <TD style="color:red"><span id="searchForm:searchText9"> AND </span></TD>
               <TD><input type="text" id="searchForm:custNameId" value=""/></TD>
          </TR>
     </TBODY>
</TABLE>

Yeah, I would love to know about this too.
What I did is (you will hate this solution) I hacked my designers design to make the first column (the radio column) to be one big column. In side this column, I did
<h:selectOneRadio id="customerSearchRadioGroupId" layout="pageDirection">
<f:selectItem ..... />
<f:selectItem .... />
</h:selectOneRadio>
this is wack, but I can't think of any other solution. in ASP.NET you get a groupName attribute, which make thigns a lot flexible.
The problem with this solution is the layout of the output (a table of radio button) didn't line up with the next column of textbox, so I had to go to my designer and have her modify her css.
If anybody have a solution for this, please let us know.

Pre-populating forms with radio button values

I have been pulling my hair out trying to figure out why my action page is not being pre-populate with the value that is passed from the radio button selection. Can get my hands around what I am actually doing wrong. I have changed my code several times and can not keep up with any more. So below, I have included the main page and the action page that needs to be pre-populated with the data from the database. Thank you in advance for you help and time.
MAIN.cfm
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">

<cfset today = DateFormat(Now(),"mmmm d, yyyy")>
<cfset current_time = TimeFormat(Now(),"h:mm tt")>
<cfset application_name = "Corporate Intranet Directory">
         <cfset current_url ='http://'& #CGI.SERVER_NAME# & ':'& #CGI.SERVER_PORT# & #CGI.SCRIPT_NAME#>
<cfset current_browser = #CGI.HTTP_USER_AGENT#>
<html>
<head>
<title>Employee Directory</title>
</head>

<h1>Employee Directory</h1>
<body>

<cfoutput>Today's date is #today#</cfoutput><br>
<cfoutput>The current time is #current_time#</cfoutput><p>

<p><cfoutput>URL of this template: #current_url#</cfoutput>
<cfoutput>Browser used: #current_browser#</cfoutput></p>

<tr bgcolor = "yellow">
<td>Search</td>
</tr><br>
Email: <input type="text" name="EmailAddress"
size="20" maxlength="100"><br>
<input type="Submit" value="Search"><p>

<cfquery name="employeeOfTheMonth" datasource="Directory">
    select
            e.FirstName,
                e.LastName
            from
            Employees e
            where
            e.ManOfTheMonth = 'Yes'
        </cfquery>

<cfquery name="employees" datasource="Directory">
select
e.EmployeeID,
e.FirstName,
e.LastName,
e.Title,
                e.PhoneExtension,
                e.EmailAddress,
                d.DepartmentName,
d.DepartmentID
from
Employees e,
                Departments d
            where
            e.DepartmentID = d.DepartmentID
</cfquery>
<table border="2" bordercolor="blue">

          <cfoutput query="employeeOfTheMonth">
<tr>
            <th align="center" colspan="5">Employee of the Month: #employeeOfTheMonth.FirstName# #employeeOfTheMonth.LastName# </th>
            </tr>
            </cfoutput>
            <tr>
<th>ID</th>
<th>Name</th>
<th>Title</th>
<th>Department</th>
<th>Phone Extension</th>
                <th>Email</th>
</tr>

<form action="admin3.cfm?EmployeeID=#EmployeeID#" method="post">
<cfoutput query="employees">
<cfswitch expression="#DepartmentID#">
    <cfcase value="1">
       <cfset backgroundcolor="00FFFF">
   </cfcase>
<cfcase value="2">
       <cfset backgroundcolor="ff6699">
   </cfcase>
<cfcase value="3">
       <cfset backgroundcolor="99ff99">
   </cfcase>
<cfcase value="4">
       <cfset backgroundcolor="ffcc99">
   </cfcase>
<cfcase value="5">
       <cfset backgroundcolor="cc99ff">
   </cfcase>
    <cfdefaultcase>
        <cfset backgroundcolor="red">
    </cfdefaultcase>
</cfswitch>
<tr bgcolor=#backgroundcolor#>
<td><input type ="radio" name="EmployeeID" value="#employees.EmployeeID#"</td>
<td><a href="http://localhost:8500/spiderbytes/assignments/employee_details.cfm?EmployeeID=#EmployeeID#"> #employees.FirstName# #employees.LastName#</td>
<td>#employees.Title#</td>
                <td>#employees.DepartmentName#</td>
<td>#employees.PhoneExtension#</td>
                    <td>#employees.EmailAddress#</td>
</tr>
</cfoutput>
<tr>

<td align="right" colspan="5"><cfoutput>#employees.recordCount# Employee(s) found.</cfoutput></td>
</tr>
</table>
<input type="Submit" name="Action" value="Add New Employee">
<input type="Submit" name="Action" value="Edit Employee">
<input type="Submit" name="Action" value="Delete Employee"><p>
</form>

<CFINCLUDE template="footer.cfm">
</body>
</html>
ADMIN.cfm
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title>Add New Employee</title>
</head>
<body>
<CFIF ISDEFINED("Action")>

<h1><CFOUTPUT>#Action#</CFOUTPUT></h1>

<CFIF Action IS "Edit Employee" OR Action IS "Delete Employee">

<cfquery name="DisplayEmployeeRecord" datasource="Directory">
SELECT *
FROM Employees
Where EmployeeID = #EmployeeID#
</cfquery>
<cfoutput query="DisplayEmployeeRecord">
<cfset variable.EmployeeID = "#EmployeeID#">
<cfset variable.FirstName = "#FirstName#">
<cfset variable.LastName = "#LastName#">
<cfset variable.DepartmentID = "#DepartmentID#">
<cfset variable.Title = "#Title#">
<cfset variable.Salary = "#Salary#">
<cfset variable.PhoneExtension = "#PhoneExtension#">
<cfset variable.HomeAddress = "#HomeAddress#">
</cfoutput>
</CFIF>
<form action="query.cfm" method="post">
<table border="2">

<input type="hidden" name="EmployeeID_required" value="First Name is
a required field">
<input type="hidden" name="FirstName_required" value="First Name is
a required field">
<input type="hidden" name="LastName_required" value="Last Name is
a required field">
<input type="hidden" name="DepartmentID_required" value=" Department ID is
a required field - Please fill in the coorsponding Department ID for the employee">
<input type="hidden" name="EmailAddress_required" value="Email Address is
a required field">

<tr>
<td>
First Name (required): </td>
<td><input type="Text"
name="FirstName" size="35" maxlength="35"><br></td>
</tr>
<tr>
<td>
Last Name (required): </td>
<td><input type="Text" name="LastName"
size="35" maxlength="35"><br></td>
</tr>
<tr>
<td>
Department Number (required): </td>
<td><input type="Text"
name="DepartmentID" size="35" maxlength="4"><br></td>
</tr>
<tr>
<td>
Title: </td>
<td><input type="Text"
name="Title" size="35" maxlength="35"><br></td>
</tr>
<tr>
<td>
Salary: </td>
<td><input type="Text" name="Salary"
size="35" maxlength="10"><br></td>
</tr>
<tr>
<td>
Email (required): </td>
<td><input type="Text" name="EmailAddress"
size="35" maxlength="35"><br></td>
</tr>
<tr>
<td>
Work Phone: </td>
<td><input type="Text" name="PhoneExtension"
size="35" maxlength="10"><br></td>
</tr>
<tr>
<td>
Address: </td>
<td><input type="Text" name="HomeAddress"
size="35" maxlength="50"><br></td>
</tr>

<tr>
<th align "center" colspan ="2">
<br><input type="Submit" name="Action" value="<cfoutput>#Action#</cfoutput>">
</th>
</tr>
</table>
</form>

<CFINCLUDE template="footer.cfm">
</body>
</html>
</CFIF>

Thanks for your reply. The radio button was placed inside the anchor so that when the user selects that employee, it will pre-populate the from base upon the "Action" selected (i.e. Edit Employee and Delete Employee). I quite sure this can be done with out using javascript. I know that I accomplish this by using a drop-down list, but I would like to use the radio buttons instead because I would have to change my code.
Here is the code with the radio button:
<tr bgcolor=#backgroundcolor#>
<td><input type ="radio" name="EmployeeID" value="#employees.EmployeeID#"</td>
<td><a href="http://localhost:8500/spiderbytes/assignments/employee_details.cfm?EmployeeID=#EmployeeID#"> #employees.FirstName# #employees.LastName#</td>
<td>#employees.Title#</td>
                <td>#employees.DepartmentName#</td>
<td>#employees.PhoneExtension#</td>
                    <td>#employees.EmailAddress#</td>
</tr>
Here is are some ways that I coded my form action is coded:
<form action="admin3.cfm" method="post"> OR
<form action="admin3.cfm?EmployeeID =# EmployeeID#" method="post">

How to raise pop up window along with radio buttons in module pool program

how to raise pop up window along with radio buttons in module pool program

FUNCTION zscheme_determination.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(I_KUNNR) TYPE KUNNR
*" EXPORTING
*"     REFERENCE(E_VALUE) TYPE NETWR_AK
*" TABLES
*"      G_ITEM_DATA_ITAB STRUCTURE ZITEM_DATA
* TYPES: BEGIN OF ty_sord,
*         include type ZSD_SCHEME_DTL,
*         END   OF ty_sord.
* data : gt_sord type standard table of ZSD_SCHEME_DTL,
*         wa_sord type ZSD_SCHEME_DTL.
* select * from ZSD_SCHEME_DTL into table
* gt_sord
* where matnr = i_matnr.
* T_ITEM_DATA
*********Data Declarations
   DATA:
         salesdocumentin LIKE bapivbeln-vbeln,
         orderheaderin LIKE bapisdhd1,
         orderheaderinx LIKE bapisdhd1x,
         sender LIKE bapi_sender,
         binaryrelationshiptype LIKE bapireltype-reltype,
         intnumberassignment LIKE bapiflag-bapiflag,
         behavewhenerror LIKE bapiflag-bapiflag,
         logicswitch LIKE bapisdls,
         testrun LIKE bapiflag-bapiflag,
         convert LIKE bapiflag-bapiflag,
         return LIKE bapiret2 OCCURS 0,
         orderitemsin LIKE bapisditm OCCURS 0,
         orderitemsinx LIKE bapisditmx OCCURS 0,
         orderpartners LIKE bapiparnr OCCURS 0,
         orderschedulesin LIKE bapischdl OCCURS 0,
         orderschedulesinx LIKE bapischdlx OCCURS 0,
         orderconditionsin LIKE bapicond OCCURS 0,
         orderconditionsinx LIKE bapicondx OCCURS 0,
         ordercfgsref LIKE bapicucfg OCCURS 0,
         ordercfgsinst LIKE bapicuins OCCURS 0,
         ordercfgspartof LIKE bapicuprt OCCURS 0,
         ordercfgsvalue LIKE bapicuval OCCURS 0,
         ordercfgsblob LIKE bapicublb OCCURS 0,
         ordercfgsvk LIKE bapicuvk OCCURS 0,
         ordercfgsrefinst LIKE bapicuref OCCURS 0,
         orderccard LIKE bapiccard OCCURS 0,
         ordertext LIKE bapisdtext OCCURS 0,
         orderkeys LIKE bapisdkey OCCURS 0,
         extensionin LIKE bapiparex OCCURS 0,
         partneraddresses LIKE bapiaddr1 OCCURS 0.
   DATA : wa_orderpartners LIKE bapiparnr,
          wa_orderitemsin LIKE bapisditm,
          wa_orderitemsinx LIKE bapisditmx,
          wa_orderschedulesin LIKE bapischdl,
          wa_orderschedulesinx LIKE bapischdlx,
          wa_orderconditionsin LIKE bapicond,
          wa_orderconditionsinx LIKE bapicondx,
          wa_return LIKE bapiret2,
          lv_value TYPE netwr_ak.
   DATA : lv_dtyp TYPE char45,
          lv_sorg TYPE vkorg,
          lv_sdch TYPE vtweg,
          lv_sdiv TYPE spart.
   TYPES : BEGIN OF ty_sord,
           zsdscheme TYPE comt_scheme_id,
           posnr TYPE posnr_va,
           matnr TYPE matnr,
           disc_type TYPE rebate_disc_type,
           calc_type TYPE catyp,
           qty_from TYPE kwmeng,
           qty_to TYPE kwmeng,
           spart TYPE spart,
           custcondgrp TYPE kdkg1,
           werks TYPE werks_d,
           matmn TYPE matnr,
           END   OF ty_sord.
   DATA : gt_sord   TYPE STANDARD TABLE OF ty_sord,
          gt_sordd TYPE STANDARD TABLE OF ty_sord,
          wa_sord TYPE ty_sord,
          wa_knvv TYPE knvv,
          lv_cal_foc TYPE p DECIMALS 3,
          lv_cal_dis TYPE p DECIMALS 3,
          lv_new_qty TYPE kwmeng,
          lv_posmat TYPE posnr_va,
          lv_posfoc TYPE posnr_va.
   DATA:lv_diff TYPE kwmeng.
******Schemes Selection Logic
* Get Valid Schemes
* Validate Scheme for validity Period, Material, Customer Type and Plant
   TYPES : BEGIN OF ty_rtab,
           sign   TYPE c LENGTH 1,
           option TYPE c LENGTH 2,
           low    LIKE mara-matnr,
           high   LIKE mara-matnr,
         END OF ty_rtab.
* TYPES : ty_matnr TYPE RANGE OF ty_rtab.
   DATA : it_matnr TYPE TABLE OF ty_rtab,
          wa_matnr TYPE ty_rtab,
          wa_it    TYPE zitem_data,
         wa_tab TYPE zitem_data.
*order table declaration
   TYPES:
         BEGIN OF ty_order,
           zsdscheme TYPE comt_scheme_id,
           matnr     TYPE matnr,
           kwmeng    TYPE kwmeng,
         END OF ty_order,
   BEGIN OF ty_scheme,
    zsdscheme TYPE comt_scheme_id,
*                matnr     TYPE matnr,
    kwmeng    TYPE kwmeng,
END OF ty_scheme.
   DATA:
         gt_order      TYPE TABLE OF ty_order,
         gt_scheme     TYPE TABLE OF ty_scheme,
          wa_scheme    TYPE ty_scheme,
          wa_order     TYPE ty_order.
   DATA:i_kwmeng TYPE kwmeng.
* Transfer all the material received from order to internal table
   LOOP AT g_item_data_itab INTO wa_it.
     MOVE : wa_it-matnr TO wa_matnr-low,
            'I'          TO wa_matnr-sign,
            'EQ'         TO wa_matnr-option.
     APPEND wa_matnr TO it_matnr.
     CLEAR wa_it.
   ENDLOOP.
* Get the Valid Schemes based on given criteria
   SELECT
           zsd_scheme_dtl~zsdscheme
           zsd_scheme_dtl~posnr
           zsd_scheme_dtl~matnr
           zsd_scheme_dtl~disc_type
           zsd_scheme_dtl~calc_type
           zsd_scheme_dtl~qty_from
           zsd_scheme_dtl~qty_to
           zsd_scheme~spart
           zsd_scheme_hdr~custcondgrp
           zsd_scheme_hdr~werks
           zsd_scheme_hdr~matnr
   FROM zsd_scheme_hdr
   INNER JOIN zsd_scheme ON zsd_scheme~zsdscheme = zsd_scheme_hdr~zsdscheme
   INNER JOIN zsd_scheme_dtl ON zsd_scheme_dtl~zsdscheme = zsd_scheme_hdr~zsdscheme
   INTO TABLE gt_sord
   WHERE zsd_scheme_dtl~matnr IN it_matnr
*    zsd_scheme_hdr~matnr IN it_matnr
*    AND zsd_scheme_hdr~werks = '1509'
     AND zsd_scheme_hdr~werks = '1529'
     AND zsd_scheme_hdr~custcondgrp = '01'
     AND zsd_scheme~datuv LE sy-datum
     AND zsd_scheme~datub GE sy-datum.
   SORT gt_sord BY zsdscheme ASCENDING.
* LOOP AT gt_sord INTO wa_sord.
*    READ TABLE g_item_data_itab INTO wa_it WITH KEY matnr = wa_sord-matnr.
*    wa_order-zsdscheme = wa_sord-zsdscheme.
*    wa_order-matnr = wa_it-matnr.
*    wa_order-kwmeng = wa_it-kwmeng.
*    COLLECT wa_order INTO gt_order.
*    CLEAR wa_order.
* ENDLOOP.
   LOOP AT g_item_data_itab INTO wa_it.
     READ TABLE gt_sord INTO wa_sord WITH KEY matnr = wa_it-matnr.
     wa_order-zsdscheme = wa_sord-zsdscheme.
     wa_order-matnr = wa_it-matnr.
     wa_order-kwmeng = wa_it-kwmeng.
     COLLECT wa_order INTO gt_order.
     MOVE : wa_sord-zsdscheme TO wa_scheme-zsdscheme,
            wa_it-kwmeng TO wa_scheme-kwmeng.
     COLLECT wa_scheme INTO gt_scheme.
     CLEAR : wa_order, wa_scheme.
   ENDLOOP.
   CLEAR wa_scheme.
   DATA w_line TYPE sy-tabix.
* Updating table based on Schemes
   LOOP AT gt_scheme INTO wa_scheme.
     CLEAR w_line.
     gt_sordd[] = gt_sord[].
*    DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme and disc_type NE 'FOC'.
     DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type NE 'F'.
     DELETE ADJACENT DUPLICATES FROM gt_sordd COMPARING zsdscheme matnr.
     DESCRIBE TABLE gt_sordd LINES w_line.
     IF w_line GT 1.
* popup message to select one foc type.
     ELSE.
       CLEAR wa_sord.
       READ TABLE gt_sordd INTO wa_sord INDEX 1.
       IF sy-subrc EQ 0.
         i_kwmeng = wa_scheme-kwmeng.
         lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
         lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
         MOVE : lv_cal_foc TO wa_it-kwmeng,
                wa_sord-matnr TO wa_it-matnr.
         APPEND wa_it TO g_item_data_itab.
         SORT gt_order BY kwmeng DESCENDING.
         LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
           IF lv_cal_dis GT 0.
*        LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme
*                                             AND lv_cal_dis GT 0.
*                  LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
*                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                     LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                       wa_orderconditionsin-itm_number = wa_tab-posnr.
*                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                       wa_orderconditionsin-cond_st_no = '001'.
*                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                       IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZTPB'.   "'ZREG'.
*                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                       ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZTPP'.   "'ZREG'.
                       ENDIF.
                       wa_orderconditionsin-currency = 'INR'.
                       wa_orderconditionsin-conpricdat = sy-datum.
                       APPEND wa_orderconditionsin TO orderconditionsin.
                       CLEAR wa_orderconditionsin.
*Update Discount Conditon
                     ENDLOOP.
*                  ENDLOOP.
*Modify balance of Item
             CLEAR wa_tab.
             READ TABLE g_item_data_itab INTO wa_tab WITH KEY matnr = wa_order-matnr.
             IF sy-subrc EQ 0.
               lv_diff = wa_tab-kwmeng - lv_cal_dis.
               IF lv_diff GT 0.
                 wa_tab-kwmeng = wa_tab-kwmeng - lv_cal_dis.
*            MODIFY g_item_data TRANSPORTING kwmeng index sy-tabix.
                 MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
               ELSE.
                 wa_tab-kwmeng = lv_cal_dis.
                 lv_cal_dis = lv_diff.
                 MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
*            MODIFY G_ITEM_DATA_ITAB TRANSPORTING kwmeng index sy-tabix.
               ENDIF.
               gt_sordd[] = gt_sord[].
               DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type EQ 'F'.
               DESCRIBE TABLE gt_sordd LINES w_line.
               IF w_line GT 1.
                 SORT gt_sordd BY zsdscheme DESCENDING.
*              SORT gt_sordd BY quantity DESCENDING.
                 CLEAR wa_sord.
*              LOOP AT gt_sordd WHERE quantity_from LT wa_shceme-kwmeng AND quantity_to GT wa_shceme-kwmeng.
                 LOOP AT gt_sordd INTO wa_sord WHERE qty_from LT wa_scheme-kwmeng AND qty_to GT wa_scheme-kwmeng.
*             LOOP AT gt_order INTO wa_order WHERE scheme = wa_scheme-scheme.
                   LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
*                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                     LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                       wa_orderconditionsin-itm_number = wa_tab-posnr.
*                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                       wa_orderconditionsin-cond_st_no = '001'.
*                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                       IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
*                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                       ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
                       ENDIF.
                       wa_orderconditionsin-currency = 'INR'.
                       wa_orderconditionsin-conpricdat = sy-datum.
                       APPEND wa_orderconditionsin TO orderconditionsin.
                       CLEAR wa_orderconditionsin.
*Update Discount Conditon
                     ENDLOOP.
                   ENDLOOP.
                 ENDLOOP.
               ELSE.
               ENDIF.
             ENDIF.
           ENDIF.
         ENDLOOP.
       ENDIF.
     ENDIF.
   ENDLOOP.
* select
*          ZSD_SCHEME_DTL~ZSDSCHEME
*          ZSD_SCHEME_DTL~POSNR
*          ZSD_SCHEME_DTL~matnr
*          ZSD_SCHEME_DTL~DISC_TYPE
*          ZSD_SCHEME_DTL~CALC_TYPE
*          ZSD_SCHEME_DTL~QTY_FROM
*          ZSD_SCHEME_DTL~QTY_TO
*          ZSD_SCHEME~SPART
*          ZSD_SCHEME_HDR~CUSTCONDGRP
*          ZSD_SCHEME_HDR~WERKS
*          ZSD_SCHEME_HDR~MATNR
* from ZSD_SCHEME_DTL
* inner join ZSD_SCHEME on ZSD_SCHEME~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
* inner join ZSD_SCHEME_HDR on ZSD_SCHEME_HDR~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
* into table
* gt_sord
* where ZSD_SCHEME_DTL~matnr = i_matnr and
*        ZSD_SCHEME~DATUV LE sy-datum and
*        ZSD_SCHEME~DATUB GE sy-datum.
* break-point.
* Process Common Logic for Schemes Processcing
   CLEAR wa_sord.
* Convert FOC Quantity and Materials
* LOOP AT gt_sord INTO wa_sord.
**   lv_cal = i_kwmeng / wa_sord-QTY_FROM.
*    lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
*    lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
* ENDLOOP.
*lv_new_qty = i_kwmeng - lv_cal_dis.
* Get the Sales Document Type
   SELECT SINGLE low
FROM tvarvc
INTO lv_dtyp WHERE
name = 'SD_DOC_TYPE'.
   SELECT SINGLE * FROM knvv INTO wa_knvv WHERE kunnr = i_kunnr.
   IF sy-subrc = 0.
     lv_sorg = wa_knvv-vkorg.
     lv_sdch = wa_knvv-vtweg.
     lv_sdiv = wa_knvv-spart.
   ENDIF.
* Give the Popup for schemes with multiple FOC
* Schemes Specific Processing
* Schemes Specific Processing
   orderheaderin-doc_type = lv_dtyp.
   orderheaderin-sales_org = lv_sorg.
   orderheaderin-distr_chan = lv_sdch.
   orderheaderin-division = lv_sdiv.
   wa_orderpartners-partn_role = 'AG'.
   wa_orderpartners-partn_numb = i_kunnr.
   APPEND wa_orderpartners TO orderpartners.
*    wa_ORDERPARTNERS-PARTN_ROLE = 'WE'.
*    wa_ORDERPARTNERS-PARTN_NUMB = p_ship.
*    append wa_ORDERPARTNERS to ORDERPARTNERS.
* Item number begin
   CLEAR : lv_posmat.
   lv_posmat = lv_posmat + 10.
   wa_orderitemsin-itm_number = lv_posmat.
   wa_orderitemsin-material = wa_sord-matmn. "i_matnr.
   wa_orderitemsin-target_qty = lv_new_qty.
* wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
   APPEND wa_orderitemsin TO orderitemsin.
   wa_orderitemsinx-itm_number = lv_posmat.
   wa_orderitemsinx-material = 'X'.
   wa_orderitemsinx-target_qty = 'X'.
   wa_orderitemsinx-target_qu = 'X'.
   APPEND wa_orderitemsinx TO orderitemsinx.
   wa_orderschedulesin-itm_number = lv_posmat.
   wa_orderschedulesin-sched_line = lv_posmat.
   wa_orderschedulesin-req_qty = lv_new_qty.
   APPEND wa_orderschedulesin TO orderschedulesin.
   wa_orderschedulesinx-itm_number = lv_posmat.
   wa_orderschedulesinx-sched_line = lv_posmat.
   wa_orderschedulesinx-req_qty = 'X'.
   wa_orderschedulesinx-updateflag = 'X'.
   APPEND wa_orderschedulesinx TO orderschedulesinx.
   wa_orderconditionsin-itm_number = lv_posmat.
   wa_orderconditionsin-cond_st_no = '001'.
   wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
   wa_orderconditionsin-currency = 'INR'.
   wa_orderconditionsin-conpricdat = sy-datum.
   APPEND wa_orderconditionsin TO orderconditionsin.
   wa_orderconditionsinx-itm_number = lv_posmat.
   wa_orderconditionsinx-cond_st_no = '001'.
   wa_orderconditionsinx-cond_type = 'ZDPD'. "'ZREG'.
   wa_orderconditionsinx-updateflag = 'X'.
   wa_orderconditionsinx-cond_value ='X'.
   wa_orderconditionsinx-currency = 'X'.
   APPEND wa_orderconditionsinx TO orderconditionsinx.
****18/06Beg
* if not lv_cal_dis is initial.
*    lv_posmat = lv_posmat + 10.
*    wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
*    wa_ORDERITEMSIN-MATERIAL = WA_SORD-MATMN. "i_matnr.
*    wa_ORDERITEMSIN-TARGET_QTY = lv_cal_dis.
** wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
*    append wa_ORDERITEMSIN to ORDERITEMSIN.
*    wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
*    wa_ORDERITEMSINX-MATERIAL = 'X'.
*    wa_ORDERITEMSINX-TARGET_QTY = 'X'.
*    wa_ORDERITEMSINX-TARGET_QU = 'X'.
*    append wa_ORDERITEMSINX to ORDERITEMSINX.
*    wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
*    wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
*    wa_ORDERSCHEDULESIN-REQ_QTY = lv_cal_dis.
*    append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
*    wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
*    wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
*    wa_ORDERSCHEDULESINX-req_qty = 'X'.
*    wa_ORDERSCHEDULESINX-updateflag = 'X'.
*    append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
* endif.
* lv_posmat = lv_posmat + 10.
* wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
* wa_ORDERITEMSIN-MATERIAL = i_matnr. "WA_SORD-MATMN.
* wa_ORDERITEMSIN-TARGET_QTY = LV_CAL_FOC.
* wa_ORDERITEMSIN-ITEM_CATEG = 'ZDGN'.
** wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
* append wa_ORDERITEMSIN to ORDERITEMSIN.
* wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
* wa_ORDERITEMSINX-MATERIAL = 'X'.
* wa_ORDERITEMSINX-TARGET_QTY = 'X'.
* wa_ORDERITEMSINX-TARGET_QU = 'X'.
* wa_ORDERITEMSINX-ITEM_CATEG = 'X'.
* append wa_ORDERITEMSINX to ORDERITEMSINX.
* wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
* wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
* wa_ORDERSCHEDULESIN-REQ_QTY = LV_CAL_FOC.
* append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
* wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
* wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
* wa_ORDERSCHEDULESINX-req_qty = 'X'.
* wa_ORDERSCHEDULESINX-updateflag = 'X'.
* append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
****18/06End
* Item number end
* Switch off dialog (BAPIs always run without)
   CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
   CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
     EXPORTING
*     SALESDOCUMENTIN               =
     order_header_in               = orderheaderin
*     ORDER_HEADER_INX              =
*     SENDER                        =
*     BINARY_RELATIONSHIPTYPE       =
*     INT_NUMBER_ASSIGNMENT         =
*     BEHAVE_WHEN_ERROR             =
*     LOGIC_SWITCH                  =
*     TESTRUN                       =
*     CONVERT                       = ' '
*   IMPORTING
*     SALESDOCUMENT                 =
   TABLES
     return                        = return
     order_items_in                = orderitemsin
     order_items_inx               = orderitemsinx
     order_partners                = orderpartners
     order_schedules_in            = orderschedulesin
     order_schedules_inx           = orderschedulesinx
     order_conditions_in           = orderconditionsin
     order_conditions_inx          = orderconditionsinx
*     ORDER_CFGS_REF                =
*     ORDER_CFGS_INST               =
*     ORDER_CFGS_PART_OF            =
*     ORDER_CFGS_VALUE              =
*     ORDER_CFGS_BLOB               =
*     ORDER_CFGS_VK                 =
*     ORDER_CFGS_REFINST            =
*     ORDER_CCARD                   =
*     ORDER_TEXT                    =
*     ORDER_KEYS                    =
*     EXTENSIONIN                   =
*     PARTNERADDRESSES              =
*    commit work.
   CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*     EXPORTING
*       WAIT          =
*     IMPORTING
*       RETURN        =
   LOOP AT return INTO wa_return.
     WRITE:/ wa_return-message.
   ENDLOOP.
ENDFUNCTION.
*& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
PROGRAM ZSD_SO_CHANGES2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   VBAP,kna1.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
TYPES: BEGIN OF T_ITEM_DATA,
          POSNR LIKE VBAP-POSNR,
          MATNR LIKE VBAP-MATNR,
          KWMENG LIKE VBAP-KWMENG,
          VRKME LIKE VBAP-VRKME,
        END OF T_ITEM_DATA.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
           G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
DATA:     G_ITEM_DATA_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
DATA:GV_NUM TYPE I VALUE 1,
       GV_NUM2 TYPE I.
DATA:     G_T_YREC_TAB_LINES LIKE SY-LOOPC.***********top*************
*& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
PROGRAM ZSD_SO_CHANGES2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   VBAP,kna1.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
TYPES: BEGIN OF T_ITEM_DATA,
          POSNR LIKE VBAP-POSNR,
          MATNR LIKE VBAP-MATNR,
          KWMENG LIKE VBAP-KWMENG,
          VRKME LIKE VBAP-VRKME,
        END OF T_ITEM_DATA.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
           G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
DATA:     G_ITEM_DATA_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
DATA:GV_NUM TYPE I VALUE 1,
       GV_NUM2 TYPE I.
DATA:     G_T_YREC_TAB_LINES LIKE SY-LOOPC.
************************pbo*******************
*& Include           ZSD_SO_CHANGES2_PBO
*&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: COPY DDIC-TABLE TO ITAB
MODULE ITEM_DATA_INIT OUTPUT.
   IF G_ITEM_DATA_COPIED IS INITIAL.
*&SPWIZARD: COPY DDIC-TABLE 'VBAP'
*&SPWIZARD: INTO INTERNAL TABLE 'g_ITEM_DATA_itab'
*    SELECT * FROM VBAP
*       INTO CORRESPONDING FIELDS
*       OF TABLE G_ITEM_DATA_ITAB.
*    G_ITEM_DATA_COPIED = 'X'.
     REFRESH CONTROL 'ITEM_DATA' FROM SCREEN '4000'.
   ENDIF.
   ITEM_DATA-LINES = G_T_YREC_TAB_LINES + 15.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MOVE ITAB TO DYNPRO
MODULE ITEM_DATA_MOVE OUTPUT.
   MOVE-CORRESPONDING G_ITEM_DATA_WA TO VBAP.
ENDMODULE.
*&      Module STATUS_4000 OUTPUT
*       text
MODULE STATUS_4000 OUTPUT.
   SET PF-STATUS 'APAR'.
* REFRESH G_ITEM_DATA_ITAB.
    GV_NUM = 1.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_4000 OUTPUT

How to write a numeric value to a plc register using a radio button

I'm want display a HOA (HAND/OFF/AUTO) on my screen. Lookout is connected to a Allen Bradley PLC. I am trying to write to a "N" register. I want to write a zero to open all (eg) N7:10 bits, writing a one (1) will close a contact N7:10/0 and writing a two (2) will close N7:10/1 etc. How do I do it? Can I use a radio button and if so, how?

ICI,
Just wanted to let you know that you have posted your question in the
MATRIXx part of the forum. There is a specific board for
Lookout. If you repost your message there you will be more likely
to get a good answer.
Carl L
National Instruments

How to use a radio button in enabling/disabling a text box in report progra

Hi,
    Could any please let me know, how to use a radio button in enabling/disabling a text box in report program.

*& Report ZMR_RADIO_BUTTONS
REPORT ZMR_RADIO_BUTTONS.
PARAMETERS : R1 RADIOBUTTON GROUP G1,
             R2 RADIOBUTTON GROUP G1.
PARAMETERS : A1 TYPE I,
             A2 TYPE I.
AT SELECTION-SCREEN OUTPUT.
*initialization.
IF R1 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 0.
ENDIF.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 1.
ENDIF.
ENDLOOP.
ENDIF.
IF R2 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 1.
ENDIF.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 0.
ENDIF.
modify screen.
ENDLOOP.
ENDIF.
START-OF-SELECTION.
*IF R1 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
   SCREEN-ACTIVE = 1.
ENDIF.
*ENDLOOP.
*ENDIF.
*IF R2 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
   SCREEN-ACTIVE = 0.
ENDIF.
*ENDLOOP.
*ENDIF.

How do I change the text in a field with radio buttons or check box?

Hi All:
I have a form that has a list of things with check boxes (could be done with radio buttons) at the bottom. The client wants a single field at the top of the form that repeats the text next to the checkboxes. For example if a user checks the box next to the words "You did thing 1 wrong" the client wants "You did thing 1 wrong" to appear in this text box at the top of the form. If the user checks the box next to the words "You did thing 2 wrong" the client wants the words "You did thing 2 wrong" to appear in the magic box at the top of the page. There are 10 different check box options, so the box at the top would need to be able to have 10 different things in it.
Client is not interested in a drop down menu. I asked.
I am in a bit over my head here, so my question is twofold.
1. Can you do this in Acrobat Pro 10 on a Mac?
2. Can you supply me with code?
Thanks in Advance,
Amy W.

Create a text field and make this script its custom calculation script :
     var a ="";
     if (this.getField("Check1").value == "Yes"){
     a="You did thing 1 wrong";
     event.value = a;
Also, replace "Check1" with the name of your check box or radio button, and give it an export value of "Yes".

How to define parameters with radio button

HI
How to define parameters with radio button, but that radio button should display in front of the variable name not after variable name. and under that radio button variable I hve to define parameters, select-options and some other radiobutton varibles.
I don't know how to paste figures here, otherwise i will provied u the figure for more details.
Regards.

PARAMETERS : r1 RADIOBUTTON GROUP radi.
Go to --> text elements --> selection text
R1 <your text>
You can change the program selection screen lay out in screen painter (se51) .
screen number for your selection screen is 1000.
Regards,
Santosh reddy
Edited by: Santosh Reddy on Dec 9, 2008 11:21 AM

Dynamic table with radio buttons

I need to load a dynamic table with radio buttons that allow
the user to select an item in the table. I need to have it add a
radio button with a unique identifier for each table item.
For example: the table will load all of the seminars
locations available in a certain state, the radio button will allow
the user to select the city in which they would like to attend and
that value will get passed to the registration page. The value of
each radio button would be equal to the location_id in the database
for each of the locations in the table (The table includes the
date, day, venue, address, hotel info, etc. details for each city.)
When I add dynamic radio buttons and set the value to the
location_id in the database, it allows the user to select multiple
radio buttons. I cannot find any information on how to
resolve.....??
Any help is appreciated.

beanieboo wrote:
> I need to load a dynamic table with radio buttons that
allow the user to select
> an item in the table. I need to have it add a radio
button with a unique
> identifier for each table item.
>
> For example: the table will load all of the seminars
locations available in a
> certain state, the radio button will allow the user to
select the city in which
> they would like to attend and that value will get passed
to the registration
> page. The value of each radio button would be equal to
the location_id in the
> database for each of the locations in the table (The
table includes the date,
> day, venue, address, hotel info, etc. details for each
city.)
>
> When I add dynamic radio buttons and set the value to
the location_id in the
> database, it allows the user to select multiple radio
buttons. I cannot find
> any information on how to resolve.....??
> Any help is appreciated.
Give each radio button the same name
<input type="radio" name=theLocation" value="<?php
$recordset['location_id'] ?>">
Mick

Case-endcase use with Radio button ...

Similar Messages

Maybe you are looking for