Case for micropho

Does anyone know where to get a case for the microphoto? I just bought one and can't find a case anywhere!

http://www.bestbuy.com/site/olspage....ct&id=88447668?The ad says Micro...But click the "enlarge picture" link, and it clearly shows a MicroPhoto in the case. And it's under a dollar. Wow.

Similar Messages

I'm trying to change my phone case, i have the bumper that screws in if i goto the apple store will they unscrew the case for me?

I have the bumper case that screws in so it doesn't fall apart, but i want to take it off. Will the apple store unscrew the case for me? or would i have to go to At&T to have them screw it off?

Hey,
I can confirm what xtremecaron has said, Apple will defo not remove the bumper for you. Best bet is to try different screwdrivers.

Trying to buy a protective case for MacBook Pro MD314B/A 13.3"

Hi
It's my first message on here so hope someone can help me. I've been an Apple user for three years now and absolutely love all of their products and currently have a MacBook Air, iPad 2 and iPhone 5.
I am trying to buy a protective cover/case for a friends son who is getting a MacBook Pro MD314B/A for his birthday but I'm having a lot of trouble trying to find one for that particular model, in all my searches (pretty exhaustive so far) all I seem to find are ones for the model A1278 none seem to be coming up for the MD314B/A model that I am wanting.
I only have that to go by as that is all I have been given by his mum who's pretty computer and Apple savvy so I presume it's the correct information, I just can't understand why I can't find one as I it was a doddle when I found a cover for my MacBook Air.
I know it is the 2011 model of MacBook Pro and really don't want to guess and order a wrong cover and disappoint someone on their birthday.
I hope someone can throw some light on how to make sure I find the right one, obviously I can't check on the MacBook itself as it is all boxed up ready for the big day.
Many thanks to you all

Then you want to post in the respective forums, this one is devoted to Mac Pro (tower) not notebooks.
Place that would be most likely to have accessories, upgrades too: http://www.macsales.com
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro

I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

Hi T,
Either of these will give you the info you seek:
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html

How to relate dispute case for a AR document

Hi Gurus,
I have a requirement to change the reason code change date of dispute case(DIspute management) for the related AR document.
Basically i am posting a AR document through BAPI. Now i wanted to take the last dunned date(MADAT) and find the related dispute case after that change the reason code change date using last dunned date.
so my question how to relate relevent dispute case for the AR document?
Thanks advance.
Regards,
Radhakrishna.

Hi.............
Better and simplest way you can get it through a simple qury report. Create a query by joining two tables ODLN and OINV. OINV's docdate means the closing date of delivery challan.
Regards,

How can I use the same event case for different controls dynamically

OS: Linux 2.6.24-1-686 #1 SMP Sat Apr 19 00:37:55 UTC 2008 i686 GNU/Linux
LabVIEW: Version 8.2
I have a lot of (about 50) controls (numeric, boolean) on my front panel. If a "Value Change" event will be fired by any of them the same event case shall be executed. As I do not want to add all 50 controls to the same event case manually I am looking for a way to do it at run time. Additionally the VI is still under contruction, i.e. controls will be added and removed.
Thanks for any help here.
Regards,
Johannes
Solved!
Go to Solution.

Hi Johannes,
collect all your control references (you can use the FP property for it) and create a user event. Connect this user event to your event structure. Now you have one event case for all your controls. See the attached picture.
Mike
Attachments:
Unbenannt1.PNG ‏11 KB

How to get total,maximum,mimumum no. of cases for this report

Description:     Reason For Contact For Customer - This report will provide the total number of cases created for a particular Reason For Contact for a particular Customer with a valid Business Code. This report will also provide the Maximum, Minimum and Average number of cases created for a particular Reason For Contact for that particular type of Customer. This report will take From Date, To Date, Agent Group and Business Code as inputs and generates the report on the screen. All the input criteria will be mandatory.
See the attachment for the Report.
NOTE :1) FOR TOTAL,WE HAVE COUNT NUMBER OF CASES CREATED for a particular Reason For Contact for a particular Customer with a valid Business Code
2) FOR Maximum, Minimum and Average CONSIDER number of cases created for a particular Reason For Contact for that particular type of Customer.
   For this report,I am using 5 tables. In the table ScaseParty i have C_Bus_Code,C_cust_type coulumns are there.
I am taking Input Criteria For Business code(ie c_bus_code).suppose business code is 'F0106',I have to get how many cases(means records) are there for a particular Reason For Contact for that Business Code.I AM GETTING THE TOTAL BUT
for getting maximum,minimum,average , i have to check the C_cust_type For that Business code ,after that I have to take all the business codes for that C_Cust_Type and with in the business codes ,i have to take the maximum number of cases which business code have for that particular Reason for contact For that particular customer type.
Eg: Reason for contact Businesscode   customer type
     Delivery Timing     0306            1
     Delivery Timing     0306            1
     Delivery Timing     0310            1
     Delivery Timing     0310            1
     Delivery Timing     0310            1
     Delivery Timing     0310            1
   In this way i want the result
    Maximum =4 since, for reason for contact(delivery timing) for that customer type(customer type =1),the maximum no. of cases are 4 bcz, business code = 0310 comes 4 times.
Minimum =2 bcz, business code = 0306 comes 2 times.
   The Problems i am facing
1) Since i have taken the input criteria Business code = 'f0106' ,the data filters in the where condition and the getting the number of cases exist for that business code(f0106) for that Contact of Reason data only.But i have to take all the business code exists for that Particular type of customer for that Particular reason for contact for getting the max,min,avg.
I can't handle max,min,avg in one report since it checks total cases for that Business code only.
SO,I THINK I HAVE TO INVOKE A SUBREPORT PASSING THE C_CUST_TYPE,iSN'T IT????
2) iF I TAKE THESE THINGS IN SUB REPORT,HOW CAN I find out the maximum number of case with in the business codes for reason for contact for that particular customer type.
CONSIDER THE ABOVE EXAMPLES, I AM GETTING 3 CASES FOR CODE = 0306 N 2 RECORDS FOR CODE= 0310 ,hOW CAN I GET mAXIMUM cASES ie 3 BY COMPARING THESE TWO CODES FOR THE DELIVERY TIMING . IS THERE ANY FUNCTION??????
In which way i have to handle this report.
Regards,
Vijay
mail : [email protected]

Hi Vijay,
The most efficient way to acheive what you want will be to create a stored procedure or command object in which you have a subquery that calculate your maximum, minimum and average values.
If you are looking at a solution within Crystal Reports without having to write a SQL Query, then as you said, you can use a subreport that will returns the cases created for a particular Reason For Contact for that particular type of Customer.
( You will need to link the subreport to filter the data down )
Then you can calculate the minimum values in the subreport by using the Minimum function and manually counting the values in a variable, the formula will look like:
WhilePrintingRecords;
Shared NumberVar MyMinimum;
If Minimum({Business Code}) = {Business Code} Then
   MyMinimum := MyMinimum + 1;
Insert the formula in the details section of the subreport.
This will count the number of time the minimum Business Code appears in the subreport.
You can create a similar formula for the maximum values by using the Maximum function.
As for the average, you can create a summary that counts the number of of Business Code, divided by the distinct count of Business Code, so it will give you the average. The formula will look like:
WhilePrintingRecords;
Shared NumberVar MyAverage;
MyAverage :=
( If DistinctCount({Business Code}) <> 0 Then
     Count({Business Code}) / DistinctCount({Business Code}))
Then you can display the above shared variables on your main report.
Hope this help!
Regards,
Patrick

Looking for a decent high quality case for the Omni10 Omni 10

For anyone looking for the best case for the Omni 10 then this fits perfectly and is the best match for this tablet currently
http://targus.com/uk/product_details.asp?sku=THZ200EU
In the UK, where I live, it is available from John Lewis

It appears that the Targus case has a cutout that would allow you to charge the device with the cover closed. The HP case doesn't allow for that.
I wrote a review here on the HP case. I wouldn't recommend it. I should also note that the HP store personnel chose not to make my review public...seems there's some selective editing going on there which means I will never trust any reviews on that site.
You can search here for my whole review, but basically the HP case has a couple of problems.
1. It's very heavy for a case.
2. The holes don't line up particularly well with things like the camera (no matter how many times you adjust the tablet and tighten loosent the velcro closure.
3. The aforementioned charging issue.
4. You can't have any cables plugged into the device while in Stand mode (probably also an issue with the Targus).

Can anyone tell me if they know where I can find a hard case for the new Retina Macbook Pro?

Can anyone tell me where I can find a hard case for a new 15" retina macbook pro?

I have not tried this.
http://www.amazon.com/Kuzy®-MacBook-Display-Rubberized-Aluminum/dp/B005G88RC4

Getting error while writing JUnit test case for RestFul Services

Hi All,
I have written Restful services in Netbean 6.8.
It's running well...no issues.
{color:#0000ff}While writing JUnit test cases for them, I am getting following error:
{color}{color:#993300}Testcase: testGetAuthenticated(com.ct.services.LoginServicesTest): Caused an ERROR
Implementing class{color}
java.lang.IncompatibleClassChangeError: Implementing class
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)
at org.eclipse.persistence.jpa.PersistenceProvider.createEntityManagerFactory(PersistenceProvider.java:160)
at org.eclipse.persistence.jpa.PersistenceProvider.createEntityManagerFactory(PersistenceProvider.java:65)
at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:52)
at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:34)
at com.ct.services.LoginServices.getAuthenticated(LoginServices.java:205)
at com.ct.services.LoginServicesTest.testGetAuthenticated(LoginServicesTest.java:84)
Test com.ct.services.LoginServicesTest FAILED
F:\NetbeanProjectsWorkspace\DemoProject\nbproject\build-impl.xml:972: Some tests failed; see details above.
BUILD FAILED (total time: 11 seconds)
{color:#0000ff}Strange thing is that when I am commenting below lines and its related calls:
{color}
{color:#ff0000}EntityManagerFactory mEmf = Persistence.createEntityManagerFactory("AnyName");
EntityManager mEm = mEmf.createEntityManager();
{color}
{color:#0000ff}from my code, JUnit test cases are working fine.
{color}Anybody having any idea about this ?
Thanks
Avi
Edited by: Avi007 on Aug 28, 2010 5:17 AM

Hi All,
[http://stackoverflow.com/questions/2778295/test-driven-development-problem]
Please refer the above link for the solution
Thanks
Avi
Edited by: Avi007 on Aug 30, 2010 12:33 AM

Looking for a leather case for the ipod Touch 4G

Hello everyone,
I'm looking for a real *GENUINE LEATHER* case for the iPod Touch 4G, preferably one that has a belt clip.
I just wasted $34 on the new Belkin "genuine leather case with belt clip" only to find out it smelled like rubber and felt nothing like what real leather would feel/smell like. Totally disappointed in Belkin advertising their cases as genuine leather when in fact they are made of cheap synthetic leather.

You can right click your video file, go to "Get Info", and select the Video tab and change the file type to Movie, TV Show, or Music Video, and then once that video is synced to the iPod it will be sorted into the proper location.
You can also create playlists of your video content. That would be the easiest/best way to get your genre classification system going.

Looking for specific case for iPod touch to

I saw this awesome case for an iPhone, it was pretty thick, made of rubber I think. The feature that blew me away was that in the back panel of the case was a place to wind up the ear phone cord, and two notches for the ear buds to snap in, and they seemed pretty flush with the case when in them. Even though it was for an iPhone I was curious if they had one for iPod touch, I couldn't find anything like it in the Apple Store. Does anyone know the one I'm describing?

I think this is the case you're describing:
http://www.nextdaypc.com/main/products/details.aspx?PID=4067661&rsmainid=ND01300 14

Protective screen case for 80Gb iPod

Hi
I'm a newbie and hope I get this onto the system and apologise in advance for any mistakes I make. I bought the above iPod for my daughter this Xmas and thought it came with a screen protecting case.
The only types on sale are for the 30Gb and 60Gb and in every shop selling iPOds I was told that these wouldn't fit. I can't fathom why there isn't a case for the 80Gb? Unless the shops are wrong?
My daughter wants to protect the screen and the iPod before using it so, whilst this is not a technical problem, I would really appreciate any advice on any suitable alternative case that can be used.
Happy New Year
Matt_henry
Windows XP Pro
Windows XP Pro

Hi
Thank you Rudi AK and Grimmjac you have greatly helped to clear my doubts. With three solutions I can't see how I can go wrong; I shall allow my daughter the choice!
I had some misgivings about going on any forum at all but it's been a positive experience. Having started to read about iPods, I am beginning to have a hankering for one myself, although I shall probably go for a 30Gb. I've realised just how easily it will take my entire CD collection, which I am currently backing up on windows media player. It will certainly take less space than a Personal CD player. I shall also be looking into the additional camera as it sounds very useful. Probably let my daughter try it out first.
Once again, thanks for your help and I hope I've followed convention in using your names and responding with a reply on one name. Still all new to me.
Regards
Windows XP Pro
Windows XP Pro

ZCover iPod Nano case for sale in UK, anyone interested?

I am selling a zCover ipod nano case for anyone in the UK that wants it. Used for 1 week, but need to sell as I no longer have an ipod!
Comes with the 2 cases and screen protector. Cheapest in the UK is £20, but I am starting bids at £10
If anyone is interested please go to
http://cgi.ebay.co.uk/zCover-iPod-Nano-Silicone-Case-Clear-AS-NEW_W0QQitemZ58259 58158QQcategoryZ56170QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Item number: 5825958158

I had a look at this case sounds good, but when checked it out on the web, saw this review.
I tend to agree, if doesn't protect the screen what use is it.
Another thing to add about the review, sounds a little like they were promoting this web site, when checking it out, did have a review but has been archived, and they expected to buy $$ to read the cramy opinion.
If you click RainDayMagazine you notice they only posted on this topic and identical in each stream, purely promoters not ipod users helping others.
I stick clear of this case. One last thing, you cant see your ipod either through the metal finish of this case.
Google search on iKeychain case:-
There have been a lot of rumblings in the Apple community about how easily the iPod Nano’s screen gets scratched so I am surprised that iLounge rewarded this case with an 8 even though it doesn’t offer any protection to the screen. It’s a very stylish case and the keychain aspect of it makes it very chic, but if I can’t read the screen due to it being scratched up then the case serves me no purpose.
You have to assume that because this case fits on a keychain it will be surrounded by keys and from what I have learned through extensive research over the past 17 months is that keys scratch stuff, .....
Who be stupid enough to run over their ipod really, please.

Need help locating a wallet case for an Xperia T2 Ultra Smartphone that has a slot on the side for the mini-usb

I realize this board is for Xperia tablets, but I don't see a board for Xperia Smartphones. I do hope someone here can help. I have a Sony Xperia T2 Ultra smartphone. I love the phone, but I purchased a case for it not realizing that the case doesn't have a slot on the side for the mini-usb connector, which means that I have to charge the phone with the case open.
I called Sony accessories, and they don't seem to make a case with a slot on the side. They have a very nice case, but again, it doesn't have the correct opening for the charger and you have to charge the phone with the case open.
I have also searched several websites for such a case with no luck.
Does anyone here know where I can find a wallet-style case for the Sony Xperia T2 Ultra with a magnetic closure (or some way of securing the case closed) that will actually allow me to charge the phone while the case is closed? Please let me know.

This is the only "question" I could extract out of your confusing post:
"I want to know if it even can be done in Flash or would we need to use something else like PHP or Javascript?"
It can`t be done in Flash alone you need php.
With the experience level you already admitted to, I strongly advise to stay away from such a project, you will save you and our customer a lot of headaches, no offense.

Case for micropho

Similar Messages

Maybe you are looking for