Case for MuVo V

Does anybody know where to get a Leather (Like that one for MuVo slim) ?
And No, I don't want the armband

luksajer wrote:
Hey guys!
I was wondering why isn't there such a thing available for MuVo V200?
It comes only with a neck string too, but the armband isn't even available
as an accessorie! Is it possible that it's the same case for the TX and V200
even it doesn't say so?
Thanx
Creative Worldwide website.
PB

Similar Messages

Cases for MuVo TX

Just after places where I can purchases arm band, wrist band or a belt clip for my muvo tx fm - the guy at the place i bought it from said to checkout the website but they don't sell any cases is aus... thanks

Do you just want something to store your player in or do you want to be using it in the waterproof case? Specialists like Aquapac do cases that would work - they do one that fits the Zen Micro and has a headphone connection built in.
PB

Where to get protective case for muVo V20

hi , same as the topic title.. do creative sell any pouches for the player? i tink dat would be nice.
as i place the place inside my bag together with keys, hope to prevent it from scratches.

Hi ppl,
I'm a Singaporean. My dad bought me a muvo 200 as a birthday present a month ago. I was thinking of getting a case too as tiny sratches are increasing on my v200. Can anyone kindly tell me where to get one, or does Creative has their own designed case? Thanks.

Waterproof cases for muvo tx fm or na

i think creative should make some waterproof cases esp for their small form mp3 players like iri'ver...would anyone buy one if they made some because i would...

Do you just want something to store your player in or do you want to be using it in the waterproof case? Specialists like Aquapac do cases that would work - they do one that fits the Zen Micro and has a headphone connection built in.
PB

Protective cover/case for the MuVo TX

Does Creative make like a hard cover/case for the MuVo TX FM? Not the little plastic sleeve that come with it either. Like a complete covering case.

Check the shop on this website, they should have a protecti've case for the MuVo TX FM although i'm not sure if they make hard cover cases, they should.

Need carrying case for MUV

I'm looking for a carrying case for my MUVO^2. I'd like to be able to secure it at my waist for running and working out. The only case that I've seen is one made by Case Logic (not specific for MUVO^2) that straps to your arm. Has anyone found a good case that might even allow you to access the buttons without removing the player from the case entirely?
Thanks.

Creative [url="http://us.creative.com/products/product.asp?category=3&subcategory=57&product=0563 2 target=_blank>sell one[/url].

I'm trying to change my phone case, i have the bumper that screws in if i goto the apple store will they unscrew the case for me?

I have the bumper case that screws in so it doesn't fall apart, but i want to take it off. Will the apple store unscrew the case for me? or would i have to go to At&T to have them screw it off?

Hey,
I can confirm what xtremecaron has said, Apple will defo not remove the bumper for you. Best bet is to try different screwdrivers.

Trying to buy a protective case for MacBook Pro MD314B/A 13.3"

Hi
It's my first message on here so hope someone can help me. I've been an Apple user for three years now and absolutely love all of their products and currently have a MacBook Air, iPad 2 and iPhone 5.
I am trying to buy a protective cover/case for a friends son who is getting a MacBook Pro MD314B/A for his birthday but I'm having a lot of trouble trying to find one for that particular model, in all my searches (pretty exhaustive so far) all I seem to find are ones for the model A1278 none seem to be coming up for the MD314B/A model that I am wanting.
I only have that to go by as that is all I have been given by his mum who's pretty computer and Apple savvy so I presume it's the correct information, I just can't understand why I can't find one as I it was a doddle when I found a cover for my MacBook Air.
I know it is the 2011 model of MacBook Pro and really don't want to guess and order a wrong cover and disappoint someone on their birthday.
I hope someone can throw some light on how to make sure I find the right one, obviously I can't check on the MacBook itself as it is all boxed up ready for the big day.
Many thanks to you all

Then you want to post in the respective forums, this one is devoted to Mac Pro (tower) not notebooks.
Place that would be most likely to have accessories, upgrades too: http://www.macsales.com
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro

I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

Hi T,
Either of these will give you the info you seek:
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html

How to relate dispute case for a AR document

Hi Gurus,
I have a requirement to change the reason code change date of dispute case(DIspute management) for the related AR document.
Basically i am posting a AR document through BAPI. Now i wanted to take the last dunned date(MADAT) and find the related dispute case after that change the reason code change date using last dunned date.
so my question how to relate relevent dispute case for the AR document?
Thanks advance.
Regards,
Radhakrishna.

Hi.............
Better and simplest way you can get it through a simple qury report. Create a query by joining two tables ODLN and OINV. OINV's docdate means the closing date of delivery challan.
Regards,

How can I use the same event case for different controls dynamically

OS: Linux 2.6.24-1-686 #1 SMP Sat Apr 19 00:37:55 UTC 2008 i686 GNU/Linux
LabVIEW: Version 8.2
I have a lot of (about 50) controls (numeric, boolean) on my front panel. If a "Value Change" event will be fired by any of them the same event case shall be executed. As I do not want to add all 50 controls to the same event case manually I am looking for a way to do it at run time. Additionally the VI is still under contruction, i.e. controls will be added and removed.
Thanks for any help here.
Regards,
Johannes
Solved!
Go to Solution.

Hi Johannes,
collect all your control references (you can use the FP property for it) and create a user event. Connect this user event to your event structure. Now you have one event case for all your controls. See the attached picture.
Mike
Attachments:
Unbenannt1.PNG ‏11 KB

How to get total,maximum,mimumum no. of cases for this report

Description:     Reason For Contact For Customer - This report will provide the total number of cases created for a particular Reason For Contact for a particular Customer with a valid Business Code. This report will also provide the Maximum, Minimum and Average number of cases created for a particular Reason For Contact for that particular type of Customer. This report will take From Date, To Date, Agent Group and Business Code as inputs and generates the report on the screen. All the input criteria will be mandatory.
See the attachment for the Report.
NOTE :1) FOR TOTAL,WE HAVE COUNT NUMBER OF CASES CREATED for a particular Reason For Contact for a particular Customer with a valid Business Code
2) FOR Maximum, Minimum and Average CONSIDER number of cases created for a particular Reason For Contact for that particular type of Customer.
   For this report,I am using 5 tables. In the table ScaseParty i have C_Bus_Code,C_cust_type coulumns are there.
I am taking Input Criteria For Business code(ie c_bus_code).suppose business code is 'F0106',I have to get how many cases(means records) are there for a particular Reason For Contact for that Business Code.I AM GETTING THE TOTAL BUT
for getting maximum,minimum,average , i have to check the C_cust_type For that Business code ,after that I have to take all the business codes for that C_Cust_Type and with in the business codes ,i have to take the maximum number of cases which business code have for that particular Reason for contact For that particular customer type.
Eg: Reason for contact Businesscode   customer type
     Delivery Timing     0306            1
     Delivery Timing     0306            1
     Delivery Timing     0310            1
     Delivery Timing     0310            1
     Delivery Timing     0310            1
     Delivery Timing     0310            1
   In this way i want the result
    Maximum =4 since, for reason for contact(delivery timing) for that customer type(customer type =1),the maximum no. of cases are 4 bcz, business code = 0310 comes 4 times.
Minimum =2 bcz, business code = 0306 comes 2 times.
   The Problems i am facing
1) Since i have taken the input criteria Business code = 'f0106' ,the data filters in the where condition and the getting the number of cases exist for that business code(f0106) for that Contact of Reason data only.But i have to take all the business code exists for that Particular type of customer for that Particular reason for contact for getting the max,min,avg.
I can't handle max,min,avg in one report since it checks total cases for that Business code only.
SO,I THINK I HAVE TO INVOKE A SUBREPORT PASSING THE C_CUST_TYPE,iSN'T IT????
2) iF I TAKE THESE THINGS IN SUB REPORT,HOW CAN I find out the maximum number of case with in the business codes for reason for contact for that particular customer type.
CONSIDER THE ABOVE EXAMPLES, I AM GETTING 3 CASES FOR CODE = 0306 N 2 RECORDS FOR CODE= 0310 ,hOW CAN I GET mAXIMUM cASES ie 3 BY COMPARING THESE TWO CODES FOR THE DELIVERY TIMING . IS THERE ANY FUNCTION??????
In which way i have to handle this report.
Regards,
Vijay
mail : [email protected]

Hi Vijay,
The most efficient way to acheive what you want will be to create a stored procedure or command object in which you have a subquery that calculate your maximum, minimum and average values.
If you are looking at a solution within Crystal Reports without having to write a SQL Query, then as you said, you can use a subreport that will returns the cases created for a particular Reason For Contact for that particular type of Customer.
( You will need to link the subreport to filter the data down )
Then you can calculate the minimum values in the subreport by using the Minimum function and manually counting the values in a variable, the formula will look like:
WhilePrintingRecords;
Shared NumberVar MyMinimum;
If Minimum({Business Code}) = {Business Code} Then
   MyMinimum := MyMinimum + 1;
Insert the formula in the details section of the subreport.
This will count the number of time the minimum Business Code appears in the subreport.
You can create a similar formula for the maximum values by using the Maximum function.
As for the average, you can create a summary that counts the number of of Business Code, divided by the distinct count of Business Code, so it will give you the average. The formula will look like:
WhilePrintingRecords;
Shared NumberVar MyAverage;
MyAverage :=
( If DistinctCount({Business Code}) <> 0 Then
     Count({Business Code}) / DistinctCount({Business Code}))
Then you can display the above shared variables on your main report.
Hope this help!
Regards,
Patrick

Looking for a decent high quality case for the Omni10 Omni 10

For anyone looking for the best case for the Omni 10 then this fits perfectly and is the best match for this tablet currently
http://targus.com/uk/product_details.asp?sku=THZ200EU
In the UK, where I live, it is available from John Lewis

It appears that the Targus case has a cutout that would allow you to charge the device with the cover closed. The HP case doesn't allow for that.
I wrote a review here on the HP case. I wouldn't recommend it. I should also note that the HP store personnel chose not to make my review public...seems there's some selective editing going on there which means I will never trust any reviews on that site.
You can search here for my whole review, but basically the HP case has a couple of problems.
1. It's very heavy for a case.
2. The holes don't line up particularly well with things like the camera (no matter how many times you adjust the tablet and tighten loosent the velcro closure.
3. The aforementioned charging issue.
4. You can't have any cables plugged into the device while in Stand mode (probably also an issue with the Targus).

Can anyone tell me if they know where I can find a hard case for the new Retina Macbook Pro?

Can anyone tell me where I can find a hard case for a new 15" retina macbook pro?

I have not tried this.
http://www.amazon.com/Kuzy®-MacBook-Display-Rubberized-Aluminum/dp/B005G88RC4

Getting error while writing JUnit test case for RestFul Services

Hi All,
I have written Restful services in Netbean 6.8.
It's running well...no issues.
{color:#0000ff}While writing JUnit test cases for them, I am getting following error:
{color}{color:#993300}Testcase: testGetAuthenticated(com.ct.services.LoginServicesTest): Caused an ERROR
Implementing class{color}
java.lang.IncompatibleClassChangeError: Implementing class
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)
at org.eclipse.persistence.jpa.PersistenceProvider.createEntityManagerFactory(PersistenceProvider.java:160)
at org.eclipse.persistence.jpa.PersistenceProvider.createEntityManagerFactory(PersistenceProvider.java:65)
at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:52)
at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:34)
at com.ct.services.LoginServices.getAuthenticated(LoginServices.java:205)
at com.ct.services.LoginServicesTest.testGetAuthenticated(LoginServicesTest.java:84)
Test com.ct.services.LoginServicesTest FAILED
F:\NetbeanProjectsWorkspace\DemoProject\nbproject\build-impl.xml:972: Some tests failed; see details above.
BUILD FAILED (total time: 11 seconds)
{color:#0000ff}Strange thing is that when I am commenting below lines and its related calls:
{color}
{color:#ff0000}EntityManagerFactory mEmf = Persistence.createEntityManagerFactory("AnyName");
EntityManager mEm = mEmf.createEntityManager();
{color}
{color:#0000ff}from my code, JUnit test cases are working fine.
{color}Anybody having any idea about this ?
Thanks
Avi
Edited by: Avi007 on Aug 28, 2010 5:17 AM

Hi All,
[http://stackoverflow.com/questions/2778295/test-driven-development-problem]
Please refer the above link for the solution
Thanks
Avi
Edited by: Avi007 on Aug 30, 2010 12:33 AM

Case for MuVo V

Similar Messages

Maybe you are looking for