Case for N95-4/N95 8gb for use when riding bicycle...

I want a case for my N95-4/N95 8gb for when I'm riding my bicycle (going cycling). I use sports tracker while I'm doing this. I also like to take pictures so it would be nice if I had a case with some sort of strap. any ideas from anyone?

thought I'd try and bump this since bicycle season is coming. What are other N95 owners who do biking and use sports tracker do?

Similar Messages

[svn] 1433: adding 'console' security constraint to MBeanServerGateway remote object for MBean tests and ds-console , used when running on Websphere with administrative security enabled.

Revision: 1433
Author: [email protected]
Date: 2008-04-28 13:13:12 -0700 (Mon, 28 Apr 2008)
Log Message:
adding 'console' security constraint to MBeanServerGateway remote object for MBean tests and ds-console, used when running on Websphere with administrative security enabled. Should call setCredentials("bob","bob1") to use this RO.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/remoting-config.mods.xml
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.xml

Hi,
It seems that you were using Hyper-V Remote Management Configuration Utility from the link
http://code.msdn.microsoft.com/HVRemote, if so, you can refer to the following link.
Configure Hyper-V Remote Management in seconds
http://blogs.technet.com/jhoward/archive/2008/11/14/configure-hyper-v-remote-management-in-seconds.aspx
By the way, if you want to perform the further research about Hyper-V Remote Management Configuration Utility, it is recommend that you to get further
support in the corresponding community so that you can get the most qualified pool of respondents. Thanks for your understanding.
For your convenience, I have list the related link as followed.
Discussions for Hyper-V Remote Management Configuration Utility
http://code.msdn.microsoft.com/HVRemote/Thread/List.aspx
Best Regards,
Vincent Hu

Is it normal for 10-20% cpu to be used when idle and watching activity monitor?

Is it normal for 10-20% cpu to be used when idle and watching activity monitor?
I have a macbook 6,1, 4gb of ram, and my os seems to be spinning the rainbow quite often and laggy. I watch my activity monitor and it never drops below 90% cpu available. Is this normal? if not what can I do to clean up my os. Does anyone have any resources or help? Thanks

Hello:
Answer - no.
The activity monitor should indicate what is consuming the processor when your system is idle.
I just looked at my own system with Safari running and the usage is about 3%.
Barry

F4 help for custom table field - to be used when populating data thru SM30

Hi,
I have a custom table with 5 fields - say A, B, C, D and E. While populating data to the table through SM30, I need to create a F4 help for the field C. A custom function module needs to be used.
I have created a module for the same in the event PROCESS ON VALUE-REQUEST of the function group of the table.
But the F4 for field C depends on the values put in fields A and B.
I am not able to get the values of fields A and B from within the module PROCESS ON VALUE-REQUEST.
Please help me to create the F4 help.

hii,
This is the piece of code i have used in one of my SM30 to get f4. mopdify according to ur need and use.
revert back for further help.
w_dynpread-fieldname = 'ZSITEDCDATA-SITE'.
APPEND w_dynpread TO i_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = 'SAPLZSITEDCDATA'
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = i_dynpread
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE i_dynpread INTO w_dynpread INDEX 1.
IF sy-subrc IS INITIAL.
    SELECT land1 FROM t001w
      INTO TABLE i_site
      WHERE werks EQ w_dynpread-fieldvalue.
    IF i_site[] IS NOT INITIAL.
      DATA: lv_line TYPE i.
      CLEAR lv_line.
      DESCRIBE TABLE i_site LINES lv_line.
      IF lv_line GT 1.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
            retfield        = 'ZSITEDCDATA-SITE_COUNTRY'
            dynpprog        = 'SAPLZSITEDCDATA'
            dynpnr          = sy-dynnr
            window_title    = 'Site Country'
            value_org       = 'S'
          TABLES
            value_tab       = i_site[]
            return_tab      = i_return
          EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ELSE.
          READ TABLE i_return INTO w_return INDEX 1.
          IF sy-subrc IS INITIAL.
            zsitedcdata-site_country = w_return-fieldval.
          ENDIF.
        ENDIF.
Thanks ,
Gaurav

Use cases for the SAP HANA Appliance for SAP FI-Accts.Payable

Hello SAP HANA friends:
Are there any compelling use cases for the SAP HANA Appliance for SAP FI-AP Accounts Payable module?
CO-PA and CRM have many immediate use cases, but I'm looking for the use case for Accounts Payable,
either from a cash flow perspective or performance.
Any and all comments are appreciated.
Regards,
Joe Gonzales
856 912 1136

Hi,
In SQL console please execute below query .
GRANT SELECT ON SCHEMA <schema Name> TO "_SYS_REPO";
BR
Sumeet

Facebook Client for the Nokia N95

Hi
I was wandering if that there will be a facebook client for the nokia n95.
I know they have released one for the nokia n96, which comes with the new update, but they don't seem to have one for the nokia n95.
Does anyone know when there will be one released?
Thanks

That is very strange. I am in Ireland and it is available to me. Try this. Goto to www.ovi.com, select store, set your phone type to N95 and search for Facebook. Even if it does not allow you to download the Facebook client, there are plenty more apps that also support Facebook.

How can I clean leather smart case bright green, or mayby prevent it to get dirthy with the kind of spray using for shoes.? Sorry for bad english

How can I clean leather smart case bright green, or mayby prevent it to get dirthy with the kind of spray using for shoes.? Sorry for bad english

Use the same cleaner as for shoes.

My iCloud on iPhone says I have 2,8Gb in use for mail. However, my folders are ( down to a few emails ) emtpy?

My iCloud on iPhone says I have 2,8Gb in use for mail. However, my folders are ( down to a few emails ) emtpy? Where does this come from?

Welcome to the Apple Community Rickymundo.
Have you accounted for mail in the trash.
You may also want to look at this article...
About storage buffering

N95 Device Manager (Check for Updates)

Well i'm currently looking on my n95 for this option to check for updates but its not listed in the options.
My guess is that i currently dont have a server profile added in.
Could anyone help here since i can't check for updates without a server and i can't find the details anywhere.
Thanks.

Are you talking about firmware updates?
Nokia Software Updater
Download the software from there and do it through PC suite.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Best settings to use when preparing HD source material for iDVD?

I realize iDVD is effectively abandonware, and that it was never really designed either to run on Lion nor to import high definition content...but nevertheless here I am (somewhat unavoidably) trying to do both and constantly getting the dreaded and mysterious "an error occured during movie encoding" result when I try to burn or export my project to a disc image.
If it matters, I am using a Mac Pro (1,1) with a 5770, running 10.7.5 with 8GB of RAM and oodles of free diskspace. All of my software is fully up to date, including iDVD 7.1.2 build 1158. Several utilities report nothing erroneous with my drives or their filesystems. I have made sure Perian is not installed. I have tried to create and export this DVD using both my primary user account and a clean dummy one I made for testing purposes.
After considerable trial and error experiments, each taking several hours to attempt, I've decided that I'm never going to easily figure out exacty which of my many various source files for this project (holiday videos for family) may be giving iDVD hiccups. Instead, I've decided to take another approach, making all of my content as easy to "spoon feed" to iDVD as possible. Hopefully then I can get this project done.
My question is what, ideally, does iDVD like to be fed?
For starters, I am in the process of transcoding and repackaging all of my content through MPEG Streamclip to be AIC video and uncompressed audio inside MOV containers. In each case I am scaling the video down to be 480 lines tall. Just guessing, but that seems like it would give iDVD the least possible work to "think" about and get confused. Does that sound about right to folks?
Should I be doing something drastic and old school like trying to create DV files? My content is all wide aspect, intended for a 16:9 iDVD project and that seems like it would get tricky (also, this would involve more quality loss than using AIC files).
I am totally open to suggestions here. Just please don't say "dude, use Toast" or something because while I have plenty of other tools that I know would work more easily and reliably, I really want to mimic the holiday discs from previous years that I've created using the same iDVD theme.

I haven't had to wrestle with this problem, but I've followed some of the discussions and here are several ideas and resources which seem reasonable. As background, have you read about better results from using iMovie6? Also, as you imply, DV Stream (.dv) was the native format for iDVD.
https://discussions.apple.com/message/16296991#16296991
http://blog.progravix.com/?p=456
http://support.apple.com/kb/PH5432
http://support.apple.com/kb/TS1611?viewlocale=en_US&locale=en_US
...and don't forget David Pogue's "Missing Manual" series for iMovie and iDVD are excellent resources.
John

Can't find drivers for ipod nano 8GB for windows vista HELP

I am trying to find the drivers for my ipod nano 8GB. I am running Windows Vista on my laptop. I have tried absolutely everything listed on this webpage and others. I have removed itunes and reinstalled it and still nothing. I downloaded usbstor.sys and usbstor.inf. I have gone into my computer and clicked on the ! next to my ipod in file manager and have gotten nowhere! This has been 5 days of frustration. I don't understand why apple would not just SUPPLY the software for the nano. I am beyond frustrated now. Can someone please help...

Something is going on with your Nano if Vista doesn't see it anymore. Did you use device manager and try to uninstall your Nano? Perhaps this will work. Once uninstalled, the next time you plug it in, Vista will see the Nano as a new device and install the proper USB drivers.
I'm not on my Vista computer right now...but here's an article to help you find device manager in Vista: http://kb.wisc.edu/page.php?id=5183
Good luck!

Filename case issue in precompilation of JSPs for Windows

Hello,
          I have determined why my JSP pages have been recompiling
          despite including the corresponding compiled class files in
          my application package.
          It seems as though on Windows, any jsp files that have
          filenames that have upper
          case letters are being recompiled, even if their precompiled pages
          are included in the .war file. JSP files that have filenames that are all
          lower case
          are not recompiled, which is expected behavior.
          The UNIX version of BEA does not seem to have this bug
          related to the case of JSP filenames.
          Could someone from BEA please give us more information
          on this issue and when we can see it fixed?
          Thank you very much,
          Peter Kim
          p.s. I am using Weblogic Server version 7.0.1.0.


I'm seeing something slightly different here.
          I'm including __MyJsp.class (with the proper case) in my
          packaged .war file, but when a request is made for MyJsp.jsp,
          BEA looks for __myjsp.class instead of __MyJsp.class--
          therefore it recompiles MyJsp.jsp.
          -peter
          "Simon Spruzen" <[email protected]> wrote in message
          news:[email protected]...
          >
          > You get the same behaviour on 6.1 SP2 as well. MyJsp.jsp gets turned into
          __myjsp.class
          > (all lower case), but WebLogic looks for __MyJsp.class. This works just
          fine on
          > NTFS which is case-preserving/case-insensitive, but is hosed on Unix.
          Hence the
          > recompile.
          >
          > But the generated class file refers to the correctly cased Jsp page in its
          _isStale()
          > method. Sigh.
          >
          >
          > simon.
          >
          >
          > "Peter Kim" <[email protected]> wrote:
          > >Hello,
          > >
          > >I have determined why my JSP pages have been recompiling
          > >despite including the corresponding compiled class files in
          > >my application package.
          > >
          > >It seems as though on Windows, any jsp files that have
          > >filenames that have upper
          > >case letters are being recompiled, even if their precompiled pages
          > >are included in the .war file. JSP files that have filenames that are
          > >all
          > >lower case
          > >are not recompiled, which is expected behavior.
          > >
          > >The UNIX version of BEA does not seem to have this bug
          > >related to the case of JSP filenames.
          > >
          > >Could someone from BEA please give us more information
          > >on this issue and when we can see it fixed?
          > >
          > >Thank you very much,
          > >
          > >Peter Kim
          > >
          > >p.s. I am using Weblogic Server version 7.0.1.0.
          > >
          > >
          >

I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Element

I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.

How did you try to install ACR 8.8. The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
There are two charts supplied by Adobe that explain your RAW dilemma. This one tells you what your camera needs: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html This one tells you what version of software you need: http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6. (Congratulations on buying a new camera!)
To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13. Adobe caps ACR updates on version 12 at 8.5.
The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter. Download and install it from here for FREE: http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890 Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use. That includes old versions of Photoshop, Elements and Lightroom. DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless. There is no risk of any image quality degradation or RAW functionality.

Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

Hi SandyS_VZW,
Yes tried resetting the wifi connection and problem still persist.
Here it is...to make it clear. Connected thru the same wifi at home...
-> emails (yahoo/gmail) and facebook WEBSITES are working fine and fast when using/accessing thru a browser (chrome/samsung browser) - no problem with this.
-> emails (yahoo/gmail) and facebook APP is soooooo sloooww (thru the App). Slow I mean comparing it to using their browser/websites... news feeds/emails refreshing so quickly but not when using the APP installed in Samsung Galaxy Note 4. Slow like - It will take around 5-10minutes just to get your emails and news feed refreshed.
THIS HAPPENS ONLY WHEN CONNECTED THRU A WIFI which has a speed of 10-20mb. It is not happening when connected to the network data/plan.
My wife has the same Samsung Galaxy Note 4 (coming from different provider at&t) - same setup (emails, fb app), same wifi connection, but she's not experiencing anything like it.
Not sure why, I dont want to believe that while connected to a WIFI, Verizon is restricting anything and ******* me off to make me switch to my data plan connection everytime - which is Unfair!
Was there a known issue similar about this case?
thanks,

How to use i for if condition in a for i in loop?

Hi friends,
I have a question on how to use i for IF condition in a loop, in order to get an efficient programming and results. Here is outlined SQL:
cursor is
select c1,c2,c3 from table1; -- 100 rows returned.
open cursor
loop
fetch c1,c2,c3 into v1,v2,v3;
for i in 1..3 loop
if 'v'||i between 90 and 100 then
v_grade := 'Excellent';
elsif 'v'||i between 80 and 89 then
elsif 'v'||i between 50 and 59 then
end if;
end loop;
close cursor;
This way, I don't need to use a lot of if..then for hard code v1,v2,v3,.... actually I have more v..
But Oracle gave an error of this usage of 'if 'v'||i' or 'v'||to_char(i).
Thanks for any advice in advance!

user508774 wrote:
Thanks for comments and advices. But I didn't get your inputs clearly. Are you saying I don't need to use PL/SQL to achieve this?Correct. Ronel and John showed you the basic approaches. SQL is not a mere I/O language for making read and write calls. It is a very capable, flexible and powerful language. One can solve a problem with a few lines of SQL code, that will take 100's of lines of PL/SQL or Java code.
So do not underestimate what can be done in SQL.
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
EXECUTE IMMEDIATE v_cmd;This code is also wrong. Besides the fact that there is no need for dynamic SQL, this approach creates a brand new SQL statement each loop iteration.
SQL is source code. It needs to be parsed (compiled). The end result is an executable program that is called a cursor. This cursor needs to be stored in server memory (the SQL Shared Pool in the SGA).
The problem with your code is that it is slow and expensive - it generates lots of unique SQL statements that need CPU for parsing and server memory for storage.
These add up to a very significant performance overhead. That is the wrong approach. The correct approach is the same one that you would use in any other programming language.
Let's say you need to use Java to process a bunch of CSV files - exact same CSV layout used by each file. A file needs to be read, processed, and a log file created.
Will you write a Java program that loops through the files, for each file found, write a Java program for processing that file, compile it, then execute it?
Or would you write a Java program that takes the name of the file as input, and then process that file and writes the log file?
The 2nd approach provides a program that can process any of those CSV files - one simply needs to pass the filename as an input parameter.
Your code and approach use the 1st method. Not the 2nd. And that is why it is wrong.
To create a SQL program with parameters is done by using bind variables. Instead of
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
The following SQL source code should be created:
v_cmd := 'UPDATE parts_categ_counts SET w1=:v1, w2=:v2 ..., w9=:v9 WHERE seq= :vseq';
The tokens with the colon prefix (such as :v1), are bind variables. Think of these as the parameters to the SQL cursor.
The server parses this SQL into a cursor. You can now execute the same cursor over and over again, using different bind variables. (just like the 2nd approach above that one would use in Java)
In PL/SQL, this is made even easier as you can code native SQL code with PL/SQL code and use PL/SQL variables in it. The PL/SQL compiler is clever enough to do the SQL parsing, variable binding, and cursor execution for you. So in PL/SQL, you would use:
UPDATE parts_categ_counts SET w1=v1, w2=v2 ..., w9=v9 WHERE seq= vseq;
Where v1 and the others are PL/SQL variables.
That all said - PL/SQL is only used for data crunching, when the processing of data is too complex for the SQL language to deal with. And this is very seldom the case.
The main reason for using PL/SQL it to provide processing flow control, conditional processing and error handling, for SQL code. As the SQL language does not have these features.

Case for N95-4/N95 8gb for use when riding bicycle...

Similar Messages

Maybe you are looking for