Case mod question

Hello everyone.
Currently I have a k8t motherboard with this case http://www.modthebox.com/review292_1.shtml and I am wondering if it is safe to redo the two front led lights behind the eyes and connect them to the HD LED on the moatherboard ?
The reason I ask is I and new to modding do not want to burn out my motherboard if it will not work though I think it would since the led lights use only 2 wires to light up currently.

most of the time you can find that info in your Manual for MB, but if not most take 5V reverse and type 3.3v  and for the leds in the case, if the manufacturer has no info, then don't worry about it.  they all follow similar guidelines to do all this.  I use to do similar mods and never burned anything.  Of course if you really want to be sure about the volts you can spend 70-100+ on equipments that will tell you that and more.  But no need.   just give it a shot, you will be fine.

Similar Messages

  • Case Mod Competition 2004 by CoolerMaster

    Case Mod Competition 2004 by CoolerMaster.
    Please find the link for more information.
    http://www.coolermaster.com/phpBB2/viewtopic.php?t=235

    Why there is no similar competition in MSI, I mean one that can give members free stuffs?  

  • HP Prme: Which functions only work in CAS mode???

    I enter a simple substituion into Home mode:
    subst(Y^5,Y=2)    and I get  " Error: Bad Arrgument Type"
    I enter the same formula into the CAS mode after changing the letters to lower case and I get the result:  32
    How does the user know which functions work in which modes:  Home or CAS  ?????
    also  is there a way to perform multitude substitutions at the same time  ie   subst(y^5+x^7,y=2,x=3)  ????
    thanks

    The iMac G5 was one that had many power supply and bad capacitor issues.  This sounds like one of them.
    Come on.  The poster says it works in safe mode, so how can it be a power supply problem?
    Seems like a video chip problem to me. The solder worked loose over time in some machines. Re-solder for the brave.
    You will have to translate this to 10.5. 
    You may have a problem with the video chip.
    Here is how to tell...
      Shutdown your machine.  Hold down the shift key.  Poweron.  Bootup will be longer.
        Wait awhile while you harddrive is being checked.
      An article on how to boot into safe mode.
        http://support.apple.com/kb/ht1455
    Runs OK in safe mode...
    Running in Safe mode leaves out some video drivers.  Which results in your machine not using advanced video hardware. As luck would have it, you can run the safe mode video drivers in normal mode.
    Here is how:
    https://discussions.apple.com/message/16057567#16057567
    Look through the above thread.  See the second page.  You don't have to read through the first page.  Just go to the part where I try a solution that works.
    Summary of G5 problems. Includes instructions on a hardware fix for the brave at heart:
    See -Rotten Apple- articles in both of these threads.
    https://discussions.apple.com/thread/4023152?tstart=0
    https://discussions.apple.com/message/18700825#18700825
    Robert

  • Altoid Case Mod For Nomad II

    Hey this is pretty cool someone wrote up a full set of instructions to create a n altoids case mod for your player.
    http://kwarnerdesign.com/kevin/NomadIIAltoidmodframe.htmMessage Edited by iddx on 03-23-2005 05:25 AMMessage Edited by iddx on 03-23-2005 05:26 AM

    Dear Matthew,
    Thanks a lot for your reply!
    First I want to note that I came across the - rename to .m2v - trick, and that seems to work really fine - no need to convert whatsoever, have you tried that and if so - what are the drawbacks?
    The trick : rename 'untitled-1.MOD' to 'untitled-1.m2v' so premiere can import it without trouble.
    Further I downloaded Super v2009.build.36 (june 10, 2009) from this site:
    http://www.erightsoft.com/
    But it somehow doesn't not recognize .MOD files.
    Do I need to have some other software installed or am I missing something else?
    I will try to use the 'rename the .MOD file to m2v'-method, before that I did this:
    Convert the .MOD's with mpeg-streamclip (.com)
    For the AC3 audio handling in premiere CS3 I use this trick:
    'Why is there no audio in my imported MPEG file?
    If your MPEG file contains AC3 (Dolby Digital) audio then Mitch411 said:
    If you've got Encore CS3 installed , copy the file ad2ac3dec.dll from the
    Encore CS3 directory and paste it into the PPro CS3 root directory. Once
    you restart CS3, you'll be able to import the file with the audio. This
    means if you've already have a project with the files imported, you'll
    need to remove the files from the project and then re-import them, or just
    start over with a new project.'
    kind regards,
    Tobias Beuving

  • [Case MOD]Kraitskin by by CalegaR1

    【Case MOD】Kraitskin by by CalegaR1
    Wow. That is all we can say about this beautiful casemod called “Kraitskin” made by CalegaR1. It looks like MSI and Louis Vuitton had a baby. 
    Which mascot/doll/cartoon character you think is perfect to place on the “Kraitskin” mod? Maybe you could leave your ideas here goo.gl/vzH0bS
    Modder: CalegaR1(Maicol Maik Calegari)
    Motherboard: MSI Z97S SLI Krait Edition
    VGA: MSI GTX 660 Ti Power Edition
    CPU: Intel I5 4690K
    RAM: Avexir Core 8 gb 1600 c9 1.5v “white led”
    Storage: Intel SSD
    PSU: Cooler Master V650 modular
    FANS: Cooler Master JetFlow “white led” 6x
    CASE: Dimastech benchtable Easy V3
    FITTINGS: EKWB black nickel 16/10
    TUBING: Masterkleer White
    PUMP: LAING DDC + EKWB Reservoir top
    CPU WATERBLOCK: EK Supremacy Nickel-Plexy
    GPU WATERBLOCK: Heatkiller GPU-X3
    RADIATORS: XSPC 360 x2

    Why there is no similar competition in MSI, I mean one that can give members free stuffs?  

  • HP PRIME : convert() bug in CAS mode (firmware 8151)

    Hello,A bug appears when trying to convert units in CAS mode.how to reproduce: go to CAS mode,type: CONVERT(0_K,1_°C)and you will get this result : −272.15_(譕菬⓬璡扱㌁觅ﱅ譖౵譗ࡽ亊訂Ⓛ㰏甃Ⴡʹｦ謆၏ҡ抹謁袔ॄ) as you see somthing goes wrong in unit name... for info : It's the most recent firware (from july 2015) 8151. 

    Please let us know some examples of expressions that you tried, what you expected, and what happened instead.  ALSO please let us know what modes your Prime is in (e.g. RPN Entry mode, or CAS view), because Prime behaves very differently depending on the Home Settings and CAS Settings.  Which app is the currently active app (shown in the display's title bar) can also alter Prime's behavior.  When you let us know these things, we'll be able to discern why you are getting syntax errors.
    If I were a betting man, I'd wager a nickel that the problem is due to your Prime being in RPN mode.  If so, you have to use RPN syntax, not algebraic syntax.  Example: 5_ft, Enter, 1_in, Enter, CONVERT --> 60_in (just like on your HP 48).  Do I win a nickel?
    Disclaimer: I do not work for HP. I'm just another happy HP calculator user.
    -Joe-

  • How to restore "Always ignore" selection pressed on Low IL compat / EPM mode question in IE10 on Windows 7 x64?

    How to restore "Always ignore" selection pressed on Low IL compat mode / EPM question in IE10 on Windows 7 x64?
    In a previous question I asked where the Whitelist is and how to modify it but now I have clients that seem to gotten stuck after pressing "Always ignore" and then the question to run outside EPM does not come up anymore and also the Whitelist
    stops working.
    I need to get the "Question" back so the user can select to disable EPM on a per site basis (and to re-enable the Whitelist already set by login script).
    /Aldus

    same as the ActiveXFiltering sign
    a "gray" circle
    So it's not the same.  ActiveXFiltering is definitely blue.  And there would be another indicator in the Address bar.
    still hoping that Microsoft And Adobe solves this BUG. It has to be one of the most common cases of all when it comes to an
    external viewer embedded in IE11.
    You have just reminded me of another closely related case I have to test when I get to a W7sp1 Pro X64 system I have intermittent access to
    http://answers.microsoft.com/en-us/ie/forum/ie11-windows_7/videos-still-will-not-play-in-ie-11-you-force-us/5b0b6d45-0c80-411e-adc3-ca90e194539a?page=2 
    So the common factors are embedded media, IE11 and W7sp1.  In the case of the video though I'm not sure where W8.1 is getting its control--seems not to be from Flash support and not something that is controllable by Manage Add-ons.  But I
    doubt that it really matters which control it is; the type of it probably matters more.
    In case it gets us somewhere diagnosing your case, can you try that example too please?
    Robert Aldwinckle

  • [Other 865 Series] MSI 865PE Neo2-V and Dual Channel Mode Question

    Hello, I have a quick question regarding dual channel mode with my current motherboard. I have an MSI 865PE Neo2-V and am wondering if it is possible to enable dual channel mode while having three RAM modules inserted in the motherboard.
    For example, I currently have one 512MB PC3200 module in my computer. If I purchase another 512MB module and run them in dual channel mode, will it be possible to buy a 1GB module or another size module, and still have all three slots run in dual channel mode? Or is dual channel only operational on this motherboard if only two of the three slots are occupied?
    Thanks.

    Dual channel requires an even number of sticks.

  • Free cases issue + question

    I just watched the PC, and Steve said that we would receive free cases. He said that next week Apple would have a site up that allowed you to choose which case you wanted to get for free. Bumpers aren't the only ones that are being given away. There will be some other cases from other brands that will be available. This is due to the factory not being able to produce the bumpers quickly enough.
    Hope that clears up some questions.
    Here's a question of my own. Will we be able to input, say, an order number and be able to register for a case and have them send the case together with the phone or will we have to register after the phone is sent?

    Thanks for the info!! The cheap (|) case I have does not work very well as it
    comes off every time, but it works great as I haven't had too many dropped calls. Funny thing is most of my dropped calls is because I am in part of a crappy area for AT&T.

  • Need Help on using Forge Config Manager and CAS. Questions listed in the content below

    Hi All,
    I have an existing Endeca pipeline implementation where we read the data sets (Product Catalog Information) from Oracle database using JDBC adapters. The data set undergoes a series of manipulation until it gets indexed to the Endeca system. We make use of PCI for dimensions and dimension values. However, we now want to extend PCI to also include the Product catalog information. The current implementation also does not make use of CAS adapters to consume the dimensions data in PCI. The next consideration is to implement PCI as close to Out of the Box provisions and standardize it. Therefore we are also considering to implement CAS.
    The questions are as below:
    1. What are the ideal parameters that should support the use of PCI implementation (Dataset + dimension + precedence Rules + schema information) ? Note: We DO NOT have any product catalog system (like ATG) between database and Endeca.
    2. Considering that we do not have any product catalog system to organize and maintain data, how feasible is it to read directly from database through CAS Adapters and process the data ?
    3. We also plan to introduce partial update pipeline in future releases. Keeping that in mind should CAS based approach help us to read from a record store at the time of partial updates ?
    4.in case we are limiting to a business case of implementing partial updates in the above explained existing design, should a custom CAS approach be a better design ? Custom CAS approach = writing the baseline output data to record store and later referring it at the time of partial updates.
    5. Will CAS based approach help to reduce the baseline timings ?
    6. What is the best way to export data to record store instance in the above design ? (Record store API / Command line utility / CAS crawl)
    Thanks,
    Nitin

    Hi Neeraj,
    You cam use both PI SLD and Solman Local SLD for LMDB synchronization. Now here you make to make sure that correct ranks are assigned to PI and Solman SLD. With the help of multiple sld, you can remove the cause of concern. Local SLD should always be of solman.
    For CR content. that you can do for solution manager system in a click.
    Divyanshu

  • Modes Question

    I have?3 qusestions:
    )Is there any difference between sound play back lat say 24/48khz in Enterteiment Mode and Audio Creation mode if awrything(EQ and etc)?is on flat
    2)Entertaiment mode has to unoying bottons? Bass and Treble and thay are on default are at 50%, so my question is is 50% is flat or 0 % is flat, i am confused?
    3)If i have music with 24/96khz can i playback it in audio creation mode to get actualy this24/96khz hight quality sound or i need swtitch to entertaiment mode?
    thank u

    anybody will answer [email protected]

  • SSRS 2014 with SharePoint 2013 - Integrated Mode vs Native Mode Questions

    Hi,
    We are using SharePoint 2013 and SQL Server 2014.
    We are building a number of SSRS Reports that pull data from SQL Databases. (Pl note, we are not pulling any data from SharePoint Lists) 
    We have to make a choice between running the Reports in Native Mode or SharePoint Integrated Mode.
    We saw this link: https://technet.microsoft.com/en-us/library/bb326290(v=sql.105).aspx - but it has no updated version for SQL 2014. 
    We have questions on which one to choose - based on what criteria, based on performance (which will be faster), other benefits, pros and cons and also on things that work only on SharePoint Integrated Mode and things that work only on Native Mode.
    Would appreciate guidance on the above.
    Thanks
    Karthick S
    Karthick S

    Hi Karthick S,
    If you had install Sharepoint server, then configure the Reporting Services in Sharepoint mode to take advantage of the Sharepoint. However, when you run a report in the SharePoint integrated mode in SQL Server Reporting Services, the report may run noticeably
    slower than when you run the same report in native mode.More details information please reference to:General overhead performance differences when you view reports in SharePoint integrated mode versus in SharePoint
    native mode
    For more information about the features supported by Reporting Services in Sharepoint Integrated Mode(SSRS 2014), please see below article:
    Reporting Services Report Server (SharePoint Mode)
    Similar thread for your reference:
    SSRS naitive Mode VS Share Point Integrated Mode
    SQL Server Reporting Services - Native Mode or SharePoint Integrated Mode?
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • Preview Mode question

    Hi All,
    I'm new to the iMac, having just come from the PC world, and am hoping you can help me with a couple questions. I'm a photographer and in a PC opened my photos in preview then when I wanted to edit one, I'd right click and then choose the program I wanted to open the photo in (Photoshop). How do I do this from preview mode, or can I? I don't like selecting images to open from the thumbnails, because they're just not big enough to see the photo clearly.
    Second question. Windows 7 allows you a folder view that opens the folder slightly, so you can see a couple of the contents inside. I don't believe Mac has that option but I thought I'd check. It's really handy, and didn't realize how often I'd used it.
    Thanks!!

    Using the Finder's coverflow or column view is one way to get a little bit larger preview, and QuickLook can be used for an even larger (or full screen) preview. Right-clicking on a file will let you choose what to open it with (you will need to exit QuickLook if that is what you are using at the time).

  • NAC CAS HA question

    Hello,
    I currently have an IB and OoB VG environment. Both CAS are working fine, but now I want to add HA to both. Looking at te documentation (CAS user guide 4.1.3) I see I need two Service IP Addresses, one for the trusted interface and one for the untrusted. In my case since they ar running in VG mode, iwould normally have the same ip address in the trusted and untrusted sides. Does the same apply for the Service IP Addresses? should I use the same service ip on both sides??
    Do I need in total three IP's 1 for both int's of the IB CAS, 1 for both int's of the OoB CAS, and 1 for both Service IP Addresses??
    Thanks in advance for any info...

    For a VGW solution, you would use the same IP address for trusted and untrusted.
    You will need three IP addresses: Real Primary, Real Secondary, Service IP. This is per system not per interface.

  • Maintenance Mode Questions

    Hi All,
    I have SCOM 2012 SP1 CU5 and have few questions on Maintenance Mode (MM).
    1) I put my 800 agents in MM for 300 minutes and they get into "Not Monitored" state. When I pull all these 800 agents out of MM together they remain in "Not Monitored" state for about 2 to 3 hours. They get into healthy state slowly
    during these 3 hours. Is this expected? Shouldn't they all get healthy quickly? Is the number of agents slows the process and so they take time to get into Healthy State?
    2) When I pull my agents out of MM and after they get healthy, I get flood of alerts for them like Health service heartbeat failure, failed to connect to computer., low free disk space, etc. Why is this so  as they were in MM and not healthy?
    3) When the servers come out of MM, will all the workflows (rules and monitors) run again and generate alerts? even if their alerts (previously created) are already Active in SCOM ?
    4) While rebooting the SCOM servers during maintenance activity, what should be the sequence among Management Servers, DB server, DW Server, Reporting Server, Gateway Servers, Web console servers ?
    Thanks, S K Agrawal

    1) For agent "not monitor" after MM, Try to restarting the System Center Management Health service on the agent-managed computer
    2) For What to do for a not monitored state, you can refer below link
    http://technet.microsoft.com/en-us/library/hh212723.aspx
    3) Yes, after server come out from maintenance mode, it will generate alerts and work normal.
    4) Sequence will be DB server, DW Server, Management server, Reporting server, Gateway server, web console Server.
    Also you can refer below link for more info.
    http://support.microsoft.com/kb/2704170/en-us
    http://support.microsoft.com/kb/942866/en-us
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

Maybe you are looking for