Case with Keyboard Will Not Work on my HP 7"1800 Android Tablet

I baught a HP 7" 1800 android tablet and I resently baught a case with a keyboard and I can not get it to work. I have tryed every thing that I know to get it to work but it will not work! I would like to know how to get this keyboard in my case to work? Has anyone got any sugestions?

Is the keyboard using a cable or BlueTooth? If a cable, it will not work. If using BlueTooth, I would re-read the instructions provided with the keyboard. 1. Be sure the keyboard is compatible with Android. This should be stated in the instructions somewhere. 2. Put the keyboard into "pairing mode" per the instructions. This usually requires specific button presses. 3. Be sure BlueTooth is turned on in your tablet, and you have told it to "Scan for new devices" while the keyboard is in pairing mode. I have successfully used an old Palm Inc. BlueTooth keyboard with many HP tablets. WyreNut

Similar Messages

Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command PromptStep 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards

Keyboard will not work

My keyboard will not work. Last night I was using my computer and my battery died so I plugged it in and went to bed. This morning I turn my computer on and my login page appears but my keyboard and mouse will not work.

It sounds like what I have seen multiple times on a device with moisture damage.
Even sitting on a bathroom counter during a hot steamy shower or bath can cause keyboard and trackball problems UNTIL properly dried out.
It really is more common than you think.
1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
3. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
*Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
On the dashboard of your car on a sunny day
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My wired apple keyboard will not work since unplugging it and plugging it back in.

my apple keyboard will not work since I unplugged it to clean and plugged it back in.

1. Reset PRAM. http://support.apple.com/kb/ph14222
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
Best.

My Macbook Pro keyboard AND USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?

My Macbook Pro keyboard and USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?
This is quite frustrating, since it randomly occured as I was browsing the web. It seemed to happen out of nowhere. I cannot login to my user account because I cannot type my password.
Any help will be appreciated.
-Matt

If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
Next, download the 10.5.6 Combo update from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

Web address with hyphen will not work in PDF

CS 4; ID 6.0.6
OSX 10.5.8
In ID, I create web links by selecting a url and then selecting New Hyperlink From URL. The new link is a Shared Destination by default with the web address as was selected. These links work fine when exported to PDF.
When I use the same process on a url with a hyphen (part of the address and not a line break), the resulting Shared link will not work when exported to PDF. The newly created link in this case always begins with file:///Users/.
What is it about the hypen that messes up the process? I work in a bilingual government so we have a lot of urls with hyphens in them. For example: www.cga-nb.org.
Thanks.

SWSinNC wrote:
I will, thanks
so your saying that if it's fake...that specific function is a common flaw ?
Exactly!
Unfortunately the full thread recounting this saga got lost in the forum changeover, but the fake copies come in authentic looking shrink-wrapped boxes with printed documentation; and everything works except the nudge.
Or sometimes other keyboard combinations.

Nudge function with arrows will not work in PS cs2

I recently installed photoshop cs2 on my pc with windows vista home premium. And the nudge function will not work using the arrows. Is there a work around for this?

SWSinNC wrote:
I will, thanks
so your saying that if it's fake...that specific function is a common flaw ?
Exactly!
Unfortunately the full thread recounting this saga got lost in the forum changeover, but the fake copies come in authentic looking shrink-wrapped boxes with printed documentation; and everything works except the nudge.
Or sometimes other keyboard combinations.

Software Update 7.0.1 says my Kaspersky URL adviser and keyboard will not work? Any way to avoid this?

I get prompted to do a software update, when I start it I get a message saying my Kaspersky add on will not work and be disabled until they are compatible. The URL adviser and keyboard. Is there a way around this? I don't want anything that affects my anti virus.

First off, updating Firefox won't affect the anti-virus part of Kaspersky, only a couple Kaspersky add-ons for Firefox. Second, check with Kaspersky to find out if or when they're going to have compatible Firefox extensions ready for Firefox 7.

New Keyboard Will Not Work for Power On Key Combinations

I have a early 2006 model iMac with 20" display. I had to purchase a new keyboard and bought one of the new wired tactile Apple keyboards. I've upgraded to Leopard and also have the most current keyboard update to support this keyboard. Tonight I got into a situation where I needed to boot my machine holding down the "Option" key in order to select a startup partition. It did not work. I finally went and got an old keyboard off another Mac, plugged it into my iMac and powered the machine up holding the option key. They screen appeared allowing me to select the partition and I was off and running. What I have noticed is the new keyboard will not allow me to perform any of the startup key combinations like the ones for booting from a CD, or ejecting a disk, etc. Is there some driver or something I'm missing? Dave

<oops! dumb question -- deleted by Looby>

My wired keyboard will not work

Wired aluminum Apple keyboard with number pad is not working. When I forced a restart it started looking for a Bluetooth keyboard and would not stop. Got that to stop but keyboard does not work. Tried shutting down, unplugging everything and starting again. Still nothing.

Check another keyboard or buy a new one. They only cost $50 USD.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Backlight Keyboard Will Not Work!!

On my MacBook Pro 2011(early) 13" asside from my 3 beeps repeating after shut down incidents have occured (Still Not Solved: https://discussions.apple.com/message/20010138#20010138 ), my backlight keyboard will not light up. It indicates that is lit up on the screen, but no keys are actualy lit. Auto-Brightness is off in keyboard settings. . . Please help me over this seperate matter!

Are you in a dark room?
Keyboard backlighting is automatically turned off in a brightly lit room.

Updated to iOS 7 with kensington keyboard, Bluetooth keyboard will not work, help

I Made the mistake of updating and now my Bluetooth kensington keyboard purchased with ipad won't work. Anybody know a fix?

Reset Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please

I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.

Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS.

Some of my keys on my keyboard will not work. For example, if I type in an n it becomes like this n/. Also my zero button will not work. How should I fix this?

How do I fix

Fast answers:
1. Try resetting NVRAM/PRAM and SMC. Doesn't usually 'cure' keyboard problems you report, but it costs nothing and only takes a few minutes.
https://discussions.apple.com/thread/3819550?start=0&tstart=0
2. Try plugging in a USB keyboard. Doesn't absolutely have to be a Mac keyboard. A PC keyboard will work for a test. If the typing problem does not occur with the USB keyboard, you have a temporary solution until you can arrange to visit a repair facility.
3. If your MacBook is older and has a user-removable battery, shut down the computer, remove the battery, and examine it for signs of 'bulging' or swelling. Then connect the computer to the Magsafe power supply, without reinstalling the battery, and turn it back on. If the keyboard problem has gone away, it was likely caused by a swelling battery.

SOME OF THE KEYS ON MY KEYBOARD WILL NOT WORK PROPERLY. HOW DO I FIX THIS? I NEED MY COMPUTER ASAP AND APPLE WILL NOT TALK TO ME ON THE PHONE UNLESS I PURCHASE APPLE CARE WHICH I CANNOT AFFORD.(SORRY FOR CAPS ONLY WAY I CAN USE ALL KEYS)

can anyone help me? my a key, z key, q key, anf backapace key do not work for some reason and when they do it just types out a bunch if random letters and symbols. im not sure how to fix this but apple wont talk to me unless i lirchase something and i can afford to do that. need this comp to work for achool isnthwre a way tonremive keys ans see whats wrong?

Fast answers:
1. Try resetting NVRAM/PRAM and SMC. Doesn't usually 'cure' keyboard problems you report, but it costs nothing and only takes a few minutes.
https://discussions.apple.com/thread/3819550?start=0&tstart=0
2. Try plugging in a USB keyboard. Doesn't absolutely have to be a Mac keyboard. A PC keyboard will work for a test. If the typing problem does not occur with the USB keyboard, you have a temporary solution until you can arrange to visit a repair facility.
3. If your MacBook is older and has a user-removable battery, shut down the computer, remove the battery, and examine it for signs of 'bulging' or swelling. Then connect the computer to the Magsafe power supply, without reinstalling the battery, and turn it back on. If the keyboard problem has gone away, it was likely caused by a swelling battery.

Case with Keyboard Will Not Work on my HP 7"1800 Android Tablet

Similar Messages

Maybe you are looking for