Cases for ipodshuffle with battery pack in UK

I tend to use my shuffle with the battery pack and was wondering was there a special case wich fits both availible in the UK. I had the sports case but the white locks broke
, how cruddy.

My other MacBook (Macbook 13" aluminium 2.0) in Germany still has 100% after a whole year...
In all likelihood that battery exceeded its design capacity when it was new, and hasn't yet lost enough of its original capacity to be down to the capacity it was designed to have. This isn't unusual: variations in individual cells often produce new batteries with greater Full Charge Capacities than Apple specifies for them. The battery in my MBP, for example, with a design capacity of 4600mAh, arrived with a FCC of a litle more than 4800mAh, and has never been as low as 4600. It's 11 months old now, has 63 cycles on it, and it shows a capacity of about 4650mAh lately (the indicated capacity fluctuates up and down within a range of +/- 30mAh).
A long as a battery exceeds or equals its design capacity, it will be shown as 100% healthy. I don't think you have anything to worry about with your present battery; it probably just started out with something very close to its design capacity, and has lost a little. Unless its capacity continues to drop off rapidly, just use it and don't be concerned.

Similar Messages

T60 No power up with Battery pack

Hi, Im repairing a T60 1951-83S, that not power up with any battery pack, I connect the AC adapter and the Laptop Turn on, I remove Memory, Daugther card, Wireless card, CD/DVD, and the problem persist.
When the thinkpad Turn on with the AC adapter and then I disconnect the AC adapter, when I turn off the Laptop, this don turn off it just restart always, so, when a hold the ON button then turn off.
Please I need Help!, what others test I have to do??? Thank you.

Gary,
Thanks for the reply. I verified the voltage of the new battery as good (3.6v).
Still no start up once it was inserted. Then I remembered that when trouble shooting some Mac issues it is recommended to disconect from power and remove battery for 24 hrs. So Friday before I left work I did just this. This morning (Monday) I re inserted the battery, pushed the reset, and reconected to power. Low and behold the Mac started up normally. Of course I had to reset the date and time. I'm too afraid to shutdown and restart yet (got a great steaming mass of work to do), but I'll have to gird my loins for this latter in the day and let you know.
Thanks Again,
jabell

For those with battery drain / wifi issues

Many of you have found a temp fix related to exchange email accounts, this is not for you and I'm glad you have found something that seems to be working.
For those of you with battery oddities, something new to try...
See what security protocol your wireless router is using...is it WEP, WPA, WPA2, etc.
If you are using WEP, try changing to WPA/WPA2 and re-associate your iPhone with your wireless network.
IMPORTANT: Changing this setting on your router will disconnect all of your wireless network devices so only try this if you've tried everything else to this point and your phone is still acting up.
I've spent more hours troubleshooting over the last couple weeks than I care to admit. I noticed that both my routers at the office and at home were still configured using WEP protocol (older/insecure standard). I reconfigured my office network this morning with WPA and updated the configuration on my phone.
Well....................since doing this my 3GS is acting normal again (normal standby drain, not warm, wifi status bar icon not staying on constantly, etc.). So far NOTHING else has worked for me - restore as new, toggling various settings on/off, evaluating certain apps, reset settings/warnings on phone and in iTunes.
I'm curious to know if it makes a difference for any of you as this issue is certainly 'outside' of the phone itself but would make sense as some incremental firmware releases in the past have caused issues when connecting to different wireless networks.
Please report back if you try and after you've had a fair amount of time to evaluate. May just be another shot in the dark but so far it's peaked my curiosity.
Nathan

Thanks once again for your post nateinva. Ultimately it was your suggestion that got me going on the right track, but I had one additional variable...
So, after reading your post I did switch my router to WPA2 (which also necessitated reconfiguring all of my wireless devices) and then once again began testing my phone battery life. Alas, it was the same. It would drain inordinately at home on wifi, but otherwise was normal. Next I read something about router firmware, and indeed mine was a bit outdated, so I updated that to the latest version. Voila, now my battery performs as I would hope. I have several mail accounts, an exchange account and a bunch of other stuff going on. I do have push notification turned off. I now lose about 1% per hour which I find totally acceptable.
Many thanks for the helpful post.

Material number for chemical with different packing sizes

A same chemical that we purchase from supplier can be in 25Kg bag, 1000kg bag and 50 kg bag. When we receive the chemicals, the physical goods of the chemical are in 25 KG Bag, 1000kg Bag and 50Kg bag store in the warehouse.
When we sell to customer, it can be in those 3 standard bag size or in KG depend the order quantity from customer.
For the above Chemical what is the best way to catalogue the material number, should it be 3 material numbers for the 3 different pack size, or 1 material number only?

you can have two solution for this with both pros & cons with one material master:
1. You can have three different unit of measure for 25KG, 1000KG & 50KG bag and you can maintain the relationship in the material master. This will help you to get the total stock in KG in your company and you can sell to the customer. Only problem is you will not be able to determine how much of each type of packaging you have.
2. You can define the material relevant for batch management. Create three batches 25KG,1000KG & 50KG, also create three different unit of measures as explained above. Now whenever you are doing the GR just put the material in correct batch, by doing this you can easily track you material along with the type of packaging. Also you can sell the material, while delivery you can use the functional of batch determination based on some log. Only problem is manual intervention which can be covered if you use some exit while doing GR so that correct batch is selected based on the Order Unit.
Hope this will help you..
Enjoyyyyyyyyyyyyy
Akshit

Case for revolution with extended battery

When will someone make a battery case to fit my revolution with the extended battery?

Hello buster100
We all want to protect our devices so I can understand your frustrations.
At this time we nor LG have a case that accommodates the extended battery for the Revolution. I have brought your request to our Product Development Team. Hopefully that will change soon. Please check back at www.verizonwireless.com frequently as we are constantly getting new accessories in for our devices.
Thank you

A suggestion for those with battery issues:

When I first got my iPhone, I had the same battery issues many people here are talking about, in fact I posted about it myself. Its fixed. Very fixed, and Im very happy with my battery life. Here is what I did.
First, do not charge it using your USB connection. At least not always. Why? I dont know. I did the first few days, and couldnt get a full charge even tho system wasnt going to sleep. I started using the wall charger, and got longer battery life, but still not great. One night, I forwarded the phone to my home phone in case I got a call, and shut the phone down completely, and put it on charge. In the morning, I woke up to a 100% charged, fully glowing battery icon. The battery lasted all day with no issues. Every night after that, I just charged it on the wall charger, but did NOT shut it down to see what happened. I am still waking up every morning to a 100% fully charged battery. The battery life seems to get better daily now.
Today, I ran wifi for about 5 hours because I forgot to shut it off. This was after going to the pool and listening to the iPod on the phone for about 2 hours. And using the phone normally throughout the day, checking mail, sms, etc. Really a full day of work, and my battery is still over 50% full. I purposely didnt connect it to anything during the day for a recharge, not the USB or wall charger.
Good luck, hope this helps. Id be interested to know if it does.

Here's my non-scientific experiment.
After surprising battery drain for the first 10 days or so with not much usage, I completely drained the battery yesterday until the phone shut off.
I plugged into AC charge and was worried when it didn't seem to even begin charging.
I plugged into USB, assuming it needed to charge enough to at least complete a sync.
I left it on USB until about 5-10% charge, then switched it to AC. At about 50% I needed to use it, so I did but sparingly, and put it back on charge, all the while keeping Mail on manual and WiFi off.
I took it off once more to get it home from the office, then plugged into AC.
I left that charging overnight.
I never actually got the "glow", but did get the plug icon showing full charge in the status bar.
After about 2 1/2 hours this morning, the status has not moved off of 100% (but with little usage as before).
This is definitely an improvement already though. Hope this helps.

Case for iPhone4 with matte/no glare screen?

Hi!
I'm looking for an iPhone 4 case with a matte/no glare screen. I'm also looking for it to compatible with devices that in prior versions of the iphone required you to take either the whole case or the bottom of the case off (in car usage).
Thanks!
Jay

bump.

Recommended leather case for 3GS with Ed Hardy clip on cover

My girlfriend bought me one of the Ed Hardy clip on back cover's for my 16 GB iPhone 3GS.
Unfortunately now my Knomo leather case http://store.apple.com/uk/product/TU776ZM/A?fnode=MTY1NDA0NA&mco=MTE0MzU0NjY will not fit.
I was wondering if anyone can recommend a good quality leather case that would fit my 3GS with it having the Ed Hardy cover on it. Here's a list of leather cases from the Apple Store UK:
http://store.apple.com/uk/browse/home/shopiphone/iphoneaccessories/cases?mco=MTM4MDgxMzA

Well the pelican case is one of the protective cases like an otterbox or a lifeproof. The biggest difference is its muchhhh smaller and thinner than the other ones and has more protective qualities. Actually, I work on an ambulance and pelican makes the cases that the medications are stored in so the medicine doesn't just roll around plus in case anything happens they are super protected. Pelican isn't as popular because you can only get it through AT&T, but they are only $60 and have a 180° belt clip Unlike the otterbox ones that are vertical. Plus, they aren't slippery like otter. Since you say you want leather, if you search on etsy for iohone 6plus leather (or something to that extent) MANY will pop up! They have everything from faux leather to different cuts of custom leather punches. youve just got to search. One Ive found that allows you to put your own belt clip on is the one I'll put link in for. If you search belt clip on that site you will find their kit. Their basic site is mobilefun.com. (Just in case it doesn't work, I'm still new to these threads!)
http://www.mobilefun.com/49270-noreve-tradition-iphone-6-plus-leather-case-black .htm

Case for iPad2 with Bluetooth keyboard ITIP-4000

Just purchased thi and am unable to connect to bluetooth keyboard - anyone have a suggestion?

Sandra-
How are you trying to connect? If you go to Settings-General-Bluetooth, is Bluetooth set to ON? Does the keyboard show up under Devices? If you select it, do you get instructions on how to pair with it?
If the keyboard does not appear under Devices, be sure it has a fresh battery and is turned on.
Fred

Case for extended battery

I had to go with the extended battery for my Revolution to make it through the day,but now I am having problems finding a case that will accept the phone with the bump out in the back for the battery.Has anyone found a case that will fit?

I have been searching for a case for the extended battery also...and I am so disappointed that in order to have a phone that functions for more than a few hours you need to purchase this extended battery...and not to have any protection for it at all is frustrating! I hope they come out with one soon...I have rigged up a jelly case that doeesn't really fit but at least I have 'some' protection!

Zen Sleek Docking Station (Also Muvo V200 Battery Pack) Quest

Does anybody know when the Zen Sleek docking station will be back in stock, or is it in stock anywhere else? I was hoping to get it before christmas. Is there a new one coming out becuase of the Zen Sleek Photo release?
Also I have a Muvo V200, is the Creative? MuVo? NX / MuVo? TX Battery sold in the creative store compatible with this product?
Thanks for the help

The battery pack for the V200 is a different size/shape to the one for the TX, NX, TX FM etc. More important I suppose is whether the actual MP3 module is the same size or not; whether the V200 module will fit in the TX battery compartment or not.
Creative's official answer will probably be that they are different. On first looks they appear different but someone with both players might be able to give you a better answer.
PB

Portable battery pack

I'm looking for a portable battery pack to use with ap350 and br350 when doing a site survey. any recommendations, manufacturers, etc.?

Im just curios if you bought the battery pack from Terra-Wave and if it worked together with the 350-serie? The specification of the battery pack says that it can deliver 5V and 12V (according to their homepage). My concern it that 350-units uses inline power and that the input power requirements for AP350 units are 24VDC 10% to 60 VDC (Ethernet line power) compared to the AP340 that have a power consumption of 5V5% @ 800 mA.
I am looking for a battery pack that works with 350 units myself, and I would appreciate any comment of the topic.
The only product I have seen that should work together with AP350 is available here. http://www.ensign-net.co.uk/EWS/mainframe.htm

Should i get the sleeve or the case for my macbook air 13 inch. I work under air conditioned room most of the time. I also store my macbook air in an air conditioned room 24/7.

I am a college student but I don't really bring my Mac with me all time. I have read that room temperature affects the macbook air and that it needs an optimum temperature. Some sites suggested sleeves as opposed to cases for room with cold temperature. What do you guys think since I use and store my macbook in a cold room. Thanks!!

Hey kesh888,
Thanks for the question. After reviewing your post, it sounds like you have a question about the operating temperature of a MacBook Air. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Mac notebooks: Operating temperature
The location you are using your notebook should be within these ranges:
Operating temperature: 50° to 95° F (10° to 35° C)
Thanks for using Apple Support Communities.
Have a nice day,
Mario

What's the price for a MacBook Pro Retina Display Top Case with battery in the US?

I'd like to know what´s the price for a MacBook Pro Retina Display Top Case with battery in the US.

Here you go.

Battery pack case that is best for my iphone 4

i am looking for much more life between charges i need to find a good battery pack that is like a case what do you think is the best for me

The Mophie Juice Pack Air is the best battery pack case on the market. For $79.95 you get 1500 mAh all in a sleek and pretty slim accessory. The amount of bulk added is not to significant and it is quite stylish.
If you want more power, Mophie has the Juice Pack Plus, which is 2000 mAh.

Cases for ipodshuffle with battery pack in UK

Similar Messages

Maybe you are looking for