Cases With Magnets Bad for the Touch?

Is it true that one should not buy a case for the Touch with a magnetic clasp? Does anybody have one?

Is it true that one should not buy a case for the Touch with a magnetic clasp? Does anybody have one?
MacLife had a warning about that so I e-mailed Griffin about their new case. This is what they e-mailed me back:
{quote}The Elan Convertible does use magnets. They have been tested and will not harm the iPod.
Thanks for your interest.
Jerad
Griffin Technology
Technical Support{quote}
I saved this in case it ever does affect my iPod.
Dan

Similar Messages

Can anone recommed a solid case for the Touch 4g with belt clip

Can anone recommed a solid case for the Touch 4g with belt clip

I was going to suggest something from Otterbox. Unfortunately, they've chosen to discontinue iPod accessories. Still you may be able to find something on eBay. I don't know if the iPhone case can work. It'll likely be too big.

Is it possible for the Touch to work with Airport and play music wirelessly

Is it possible for the Touch to transmit music via the Airport Extreme to my Hi Fi?

No. But you can use it as a remote control for a current Mac - AirTunes -Airport Express setup with Remote Buddy (link).
The Airport Extreme Base Station doesn't have an audio facility:
http://www.ifelix.co.uk/tech/1301.html
regards
mrtotes
Message was edited by: mrtotes: Thanks Deggie!!! Must concentrate more and not have so many tabs open! RSully. When you car has stopped moving you keep it that way using a....
Message was edited by: mrtotes

I just want to externally record with my T410, for the love of god.

I record music using a mixer which then has an output line that can be converted into a male connector for a female mic input that pretty much most laptops have. But imagine my anguish when my Thinkpad T410 had a combo jack.
So I read basically every internet post there is and ordered a few splitters (1 male to 2 female, 1 mic and 1 headphones) and I still can't record. I bought the headset buddy, which people in the comments say works for Lenovo:
http://www.amazon.com/Headset-Buddy-Smartphone-Computer-Blackberry/dp/B002SK66OY/ref=pd_cp_e_0
But even when I plug in my mic and headphones, it still records only from the internal mic. No external mic option exists in the control panel. I reinstalled the drivers for this several times.
I am poor, and those two cables have cost me an additional $40, for nothing. Does anyone know how I can solve this issue?!
PS. The mic male output that I'm sticking in the headset buddy has 2 black rings, I'm not sure if maybe that's the problem or not. But this is crazy, I've had 6 different brands of laptops and only came across this issue when I bought Lenovo. Thanks.

I know I have the same problem but only need audio out through a standard 3.5mm stereo jack with enough drive level for external speakers and such. This is the problem buying online. You don't see what you're getting and much of what you won't like is non disclosed and/or required hands on assessment. Its my first online purchase of a PC. I always stayed away from Dell for that reason but didn't expect to get a number of deal breakers in the T520 that were/are bad. The touch pad is bubbled surface and not smooth as it used to be. No way to know that either. Last time for me buying online and these are not worth the price.
Anyway, this should work for you. Lenovo should have provided one in every machine rather than having to fork out for something. The typical 2 port 3.5mm is what should be there. This is not progress or an improvement as a few other things they've done.
http://ca.startech.com/Cables/Audio-Video/Audio-Cables/35mm-4-Position-to-2x-3-Position-35mm-Headset...
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Is 'never sleep' bad for the computer?

I would like to allow remote access at any time; however, I cannot do this on wireless without leaving my computer in 'Never Sleep' mode. Is leaving the computer in this 'Never Sleep' mode bad for the computer?

Never sleeping depends on the room temperature, which will affect how hot the hardware will get. If it's really hot, you will want to let it sleep to cool down. Also, running 24/7 means the fans or fan will never stop. This will mean introducing more dust into the computer, as well as possibly burning up the fan motors sooner than would be the case otherwise.
Another aspect of this is if you don't have "Put the hard disk(s) to sleep when possible" in Sys Prefs>Energy Saver, that will mean the drive will be running 24/7. I don't have that checked because I think it puts more stress on the drive to have it cycling off and on constantly. However, I do sleep the computer when not in use. Therefore, my drive, although it isn't sleeping when the computer is being used, isn't running 24/7. Some people think it's good or at least OK to run the drive 24/7, but there is no evidence it is, and although I can't support this with anything more than personal preference, I think running the drive 24/7 can't be too great for it.
A lot of this is just guesswork and personal experience and preferences.

How to find the list of USER-EXITS or BADI for the transaction ABSO

Hi all,
Please help me to find the list of USER-EXITS or BADI for the transaction ABSO & find the exact user-exit which meets the requirement.
Thanks & Regards,
gyanaraj

Hi,
Copy the problem in SE38 and Execute it
Enter the Tcode u want
this will the list of Userexits and badis
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.

Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit).

Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit). Have tried it on other browsers, and works as it should. The last add-on i installed for Firefox was "Fox Filter" so my kids couldn't accidentally stumble onto sites of immoral tastes. I can't see why that would have any effect, but it was the last update/add-on i installed to the browser, but even then,.......it was working fine for a week and a half afterwards until now. Please help.
== This happened ==
A few times a week
== A week and a half after i installed Fox Filter. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

Hello Steve.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
If you detect a faulty add-on, you should contact its author for support. You can also search for alternatives. Site filters are relatively common in the add-ons gallery: [http://addons.mozilla.org addons.mozilla.org].

Macbook Air case with magnets. Will it affect hardware or performance of product?

Macbook Air case with magnets. Will it affect hardware or performance of product?

No, the low power N30 or N35 gauss neodymium magnets in the magnetic flap cases will not affect it.
There is no HD, and the SSD are hard (relatively) to corrupt by magnetic field unless high gauss and at close proximity.

Case with Magnets - any Impact on iPhone 5?

Hi@All!
I bought a Case with Magnets to close for my iPhone 5. Does it have any Impact?
Tranks for help in advance.
Klaus

no not at all
magnets if powerful enough pasive magnets are not powerful enough but strong electromagnets can damage magnetic storage such as a harddisk
but no ios devices use magnetic storage they use flash storage

How to find BADI for the enterprise service?

Hi Experts,
We are enhancing an enterprise service for Businesspartner creation by adding an additional field in the structure. But we are not able to find out the correct BADI for the enterprise service. We are using the following enterprise service - 'BusinessPartnerERPCreateRequestConfirmation_In' . I could not find any BADI in ES workplace also .How to search for a BADI for this ES.
Any help on this will be well appreciated.
Thanks in advance
Sanu

Hi Sanu.
Not all the services is an BAPI or BAPI, maybe this is an interface.
To see the related object go to esworkplace and find the service.
You will find in the page the label "Related Web Service Definition".
Copy the related value(in your case ECC_BusinessPartnerCrtRC) it and go to SAP GUI. In transaction SE84, go to enterprise service and choice service definition.
Paste the value copied in esworkplace in field Service Definition, then F8.
In the next screen double click in the returned value.
In the next screen you will see a Reference Object field. Double click in the value and you will see the related object.
In this case is an interface. You can see in Provider Class.
Hope that's help you.
Marcos

Is it bad for the MacBook Pro to play World of Warcraft?

Is it bad for the MacBook Pro to play World of Warcraft?

There will just be a little more wear and tear than "normal" use, because the heat goes way up and the fans max out while playing, as with most gaming. I guess that affects the overall lifespan of the laptop.
I played all the time on my MBP early 2008, and still play on my 2011 MBP. The '08's fans had to be replaced but still works fine.

Is it bad for the computer to save thousands of emails?

Hi,
I have been told that it is bad for the computer to save thousands of emails... unless I somehow turn them into documents.
Is this true? And if so, how would you go about doing this? I find it very useful to go back and look through emails for certain things...
Thanks in advance...

Hi there,
It is my understanding that problems may arise if you store a large amount of e-mail messages in the Inbox (and maybe also in the Sent box). I like to keep a large amount of e-mail also and what's been recommended is to create new mailboxes and drag the messages you wish to store into these. You may name them with descriptive names that will help you with categorization. To create the boxes, go down to that little "+" sign at the bottom lefthand corner of the Mail window. There is supposedly some max size your Inbox needs to stay beneath for Mail to function correctly, but you can let the size of these extra boxes get very large without problem.
There are also ways to archive e-mail completely outside of Mail, but I've never done this myself. A search of discussions will probably yield more information on that technique. But a good thing to do right now is to create additional mailboxes as I've outlined above.
Post back. Good luck.
Steve M.

USER_EXIT / BADI for the TAXCODE in ME22n

Hi
Is there any USER_EXIT / BADI for the TAXCODE in ME22n
Plz reply

Hi,
Please try with this UserExits...
EXIT_SAPMM06E_007 --- Export Data to Customer Subscreen for Purchasing Document Header (PAI) -- This for header...
EXIT_SAPMM06E_017 ---Export Data to Customer Subscreen for Purchasing Document Item (PAI) -- This is for item...
Regards.

HT201272 Is the app Scramble with friends only for the iPhone? I installed it to my iPad but it keeps freezing up.

Is the app scramble with friends only for the I phone? I installed it to my new iPad and it kept freezing up. I uninstalled it and then installed it again, same thing happens.

it seems to be crashing for everyone - not only iPad's, but on my iPod Touch 4G, and my brother's brand new iPhone.... Zynga doesn't have any answers either. They are useless. The only thing that helped temporarily is when I deleted it from my iPod and reinstalled it.

I recently saw an ad on Facebook promoting magnetic lenses for the purpose of enhancing photos. Two questions: Do those actually work AND will the magnets harm the phone at all?

I recently saw an ad on Facebook promoting magnetic lenses for the purpose of enhancing photos. Two questions: Do those actually work AND will the magnets harm the phone at all?

Read some reviews of these lenses here:
http://www.cultofmac.com/158988/hands-on-with-zoom-fisheye-wide-and-macro-lenses -for-iphone-and-ipad-reviews/
http://www.iphoneincanada.ca/accessories/photojojos-ultimate-iphone-lens-kit-rev iew/
http://connect.dpreview.com/post/2188563587/accessory-review-photojojo-phone-len s-series
They won't hurt your iPhone.

Cases With Magnets Bad for the Touch?

Similar Messages

Maybe you are looking for