Cash on Tap - Unknown Error Code During Application Installation "-507"
I get the above message when trying to install the Cash on Tap on my LG G3 running Android 5.0 Lollipop. I also got the same error when trying to install it under the last release of KitKat. My G3 isn't the UK version D855, it's the South Korean version which is an F400S [software version F400S20g]. It's the genuine F400S rom and not a custom build [obviously customised by LG though] and not rooted. I appreciate that this device isn't on EE's supported list. But I'm curious as to what the requirements are for this rom to run, and if anyone else has encountered this message and succesfully found a fix?
.:[Bump]:.
Similar Messages
-
Unknown error code during application install: "-2...
Skype stopped working about 2 months ago on my HTC One, Android version 4.4.2. It had been working for some months, but it started giving an error code that I have long forgotten. I de-installed Skype and then tried to re-install from the Play Store. It download, begins installation and then I get the above error. I have tried the install multiple times over quite a few weeks.
Help appreciated.Was there a solution to this error code? I am getting the same error message. Skype disappeared from my tablet. I can download it from Google play store but when it installs it comes up with the above error message.
-
Error 1406 during application installations
When installing more than 1 Labview applications on my computer that were created using version 6.1 I get the following error messages:
ERROR 1406. Could not write value version major to key UNKNOWN\Products\37212F9246F95954C8E26D4561F02FFB\InstallProperties. Verift that you have sufficient access to that key.
If I select ignore another error 1406 message apears.
This only happens after one labview in installed error free and installation of another is attempeted.
Any Ideas?There are several NI KnowledgeBase articles that potentially provide answers to the installation problems you are seeing.
The first (2CRF5B1R) relates to the Windows Registry being at its maximum size and therefore not being able to write the additional keys as required by the installer. From experience this is rare, but the article is worth reading and considering.
The second (2OK8222G) states that this error may occur if you use a non-numeric character in the product version entry in the Application Builder dialog. The article provides more of an explanation - so its not worth repeating here.
Jump to the KnowledgeBase at the following link:
http://digital.ni.com/public.nsf/MainPage?OpenForm&node=133020_US
Hope this information resolves you
r problems.
Jeremy -
Web Application Designer -Unknown Error Occured during Portal Communication
we are getting the below error while using the Web Application Designer .
"Unknown Error Occured during Portal Communication"
Vesrion
SAPBW 700 SP14 on ABAP & SP12 on JAVA.
Found the below error in the default trace
Error 1
Exception thrown Fri Aug 15 11:29:15,070:Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_PREEXECUTION_PROXYnot found on host smy14sap99, ProgId =SMY14SAP99_PORTAL_BD1: Object not found in lookup of RSWR_PREEXECUTION_PROXY.
Error 2
Error> occured >Fri Aug 15 11:29:12,413<
RfcException:
message: 'ashost' is missing
Return code: RFC_INVALID_PARAMETER(19)
error group: 101
key: RFC_ERROR_PROGRAMHello,
Have a look at these Notes
SAP Note 988484 RC=12 in after import method for objects BTMP and BITM
SAP Note 916090 RFC-error messages in Web Application Designer 2004s
Thanks
Chandran -
Unknown errors encountered during publish(EJB)
Hi,
I am getting following error while deploying simple stateless EJB.
Can anybody help. Please mail me.
I am pasting the error both from JDeveloper and from command prompt deployment.
==========================================
***From JDeveloper 3.2.2 It says***
*** Executing deployment profile E:\jdevloper\myprojects\Hello.prf ***
*** Generating archive file E:\jdevloper\myprojects\HelloSource.jar ***
Compiling the project...done
Validating the profile...done
Initializing deployment...done
Scanning project files...done
Generating classpath dependencies...done
Generating archive entries table...done
*** Archive generation completed ***
*** Deploying the EJB to 8i JVM ***
EJB deployment argument list:
"E:\jdevloper\java1.2\jre\bin\javaw" "-DPATH="standard jdev path"
-classpath "standard path of Jdev" oracle.aurora.ejb.deployment.GenerateEjb
-u system -p manager -s sess_iiop://10.5.0.55:2481:ORCL -republish -keep -temp TEMP
-descriptor "E:\jdevloper\myprojects\Hello.xml" -oracledescriptor E:\jdevloper\myprojects\Hello_oracle.xml
-generated "E:\jdevloper\myprojects\HelloGenerated.jar" "E:\jdevloper\myprojects\HelloSource.jar"
Reading Deployment Descriptor...done
Verifying Deployment Descriptor...done
Gathering users...done
Generating Comm Stubs.......................................done
Compiling Stubs...done
Generating Jar File...done
Loading EJB Jar file and Comm Stubs Jar file...done
Generating EJBHome and EJBObject on the server...done
Publishing EJBHome...
Unknown errors encountered during publish. Please check the server trace file
*** Errors occurred while deploying the EJB to 8i JVM ***
*** Deployment completed ***
==========================================
***Error occured while trying to deploy from command line.***
E:\jdevloper\myprojects>D:\oas9i\bin\deployejb.bat -u system -p manager -s sess_iiop://10.5.0.55:2481:orcl -republish -keep -temp temp -descriptor Hello.xml -oracledescriptor Hello_oracle.xml HelloSource.jar
Reading Deployment Descriptor...done
Verifying Deployment Descriptor...done
Gathering users...done
Generating Comm Stubs.......................................done
Compiling Stubs...done
Generating Jar File...done
Loading EJB Jar file and Comm Stubs Jar file...Exception in thread "main" org.omg.CORBA.COMM_FAILURE: java.net.SocketException: Connection reset by peer: JVM_recv in socket input stream read minor code: 0 completed: No
at com.visigenic.vbroker.orb.TcpConnection.read(TcpConnection.java:61)
at com.visigenic.vbroker.orb.GiopConnectionImpl.receive_message(GiopConnectionImpl.java:436)
at com.visigenic.vbroker.orb.GiopConnectionImpl.receive_reply(GiopConnectionImpl.java:347)
at com.visigenic.vbroker.orb.GiopStubDelegate.invoke(GiopStubDelegate.java:562)
at com.visigenic.vbroker.orb.GiopStubDelegate.invoke(GiopStubDelegate.java:503)
at com.inprise.vbroker.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:60)
at oracle.aurora.AuroraServices._st_JISLoadJava.add(_st_JISLoadJava.java:66)
at oracle.aurora.server.tools.sess_iiop.Loadjava.add(Loadjava.java:137)
at oracle.aurora.server.tools.sess_iiop.Loadjar.loadAndCreate(Loadjar.java:101)
at oracle.aurora.server.tools.sess_iiop.Loadjar.invoke(Loadjar.java:80)
at oracle.aurora.server.tools.sess_iiop.Loadjava.<init>(Loadjava.java:94)
at oracle.aurora.server.tools.sess_iiop.Loadjar.<init>(Loadjar.java:52)
at oracle.aurora.ejb.deployment.GenerateEjb.invoke(GenerateEjb.java:560)
at oracle.aurora.server.tools.sess_iiop.ToolImpl.invoke(ToolImpl.java:143)
at oracle.aurora.ejb.deployment.GenerateEjb.main(GenerateEjb.java:575)
=============================================
I have checked log also. This is the log from oracle trace file.
Session 13 exceeded soft sessionspace limit of 0x100000 bytes.
*** SESSION ID:(8.3994) 2001-06-23 17:44:30.625
jox_call_java_pres_: caught
ORA-04031: unable to allocate 4032 bytes of shared memory ("large pool","unknown object","joxu heap init","ioc_allocate_pal")
Please help me out of this si tuation.
regards,
vijayYou can try to set the java_pool_size and shared_pool_size to larger. This parameter is in the file: init.ora . The size should be large enough. Usually at least 50M.
-
Installation operation failed.Unknown error (code:...
I am trying to intall the latest version of Nokia Ovi Suite 2.2.1.23 And keep getting Installation operation failed.Unknown error (code: 1612).
Have tried:-
Nokia PC Suite Cleaner
Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program Delete the files from...
C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite C:\Documents and Settings\user\Local Settings\Application Data\Nokia C:\Documents and Settings\All Users\Application Data\OviInstallerCache Used MSI clean up utility Restart PC.
Any solutions please...
using :-
Nokia 5800 XpressMusic
V50.0.005
Windows 7 (32 bit)These errors is coming up, becasue the windows installer is corrupted. Please reinstall windows installer from the link provided below.
http://support.microsoft.com/kb/2438651/en-us
This should defnitely work..
All the best and good luck.
Cheers
Show appreciation by clicking the kudos star :-), or gesture by typing thanks -
Oracel B2B UI - Reports - "An unknown error occured during data streaming.
I have a brand new oralce soa suite 11g R1 PS2 installation, following my own instructions even, in which everything seems to work except the B2B Web Console "Reports" functionality. When no messages are available for display (as in none were sent or all were purged) the display looks fine. WHen there are supposed to be messages to display I get the web browser dialogue box saying ""An unknown error occured during data streaming. Ask your system administrator to inspect teh server-side logs." and no data. I performed a clean install on brand new VMs 4 times already, 2-5 hours each time, and every time I get this. I used Windows XP 64-bit, WIndows XP 32-bit, JDK 1.6.0_20 64-bit (on the 64-bit platform), JDK 1.6.0_20 32-bit, Oracel provided JDK 1.6.0_18, all to no avail.
Can some kind soul please tell me what I should look at / fix to have this resolved?
The stack trace is below:
[2010-11-01T20:57:13.256+11:00] [AdminServer] [WARNING] [] [oracle.adfinternal.view.faces.renderkit.rich.SimpleSelectOneRenderer] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Ik6rbdg2zGWjLxfP8A1CnclD000079,0] [APP: b2bui] [dcid: f21c2821705695cf:-4862872f:12c06d54454:-7ff0-00000000000000d1] Could not find selected item matching value "" in RichSelectOneChoice[UIXEditableFacesBeanImpl, id=value40]
[2010-11-01T20:57:13.490+11:00] [AdminServer] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Ik6rbtn2zGWjLxfP8A1CnclD00007A,0] [APP: b2bui] [dcid: f21c2821705695cf:-4862872f:12c06d54454:-7ff0-00000000000000d5] Server Exception during PPR, #1[[
javax.servlet.ServletException: java.lang.AssertionError
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:341)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.tip.b2b.ui.util.SessionTimeoutFilter.doFilter(SessionTimeoutFilter.java:232)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.AssertionError
at oracle.adfinternal.view.faces.renderkit.rich.table.TableRenderingContext.isCurrentCellInRowBanded(TableRenderingContext.java:258)
at oracle.adfinternal.view.faces.renderkit.rich.table.TableRenderingContext.isCurrentCellBanded(TableRenderingContext.java:253)
at oracle.adfinternal.view.faces.renderkit.rich.table.BaseColumnRenderer.renderDataCellClasses(BaseColumnRenderer.java:1036)
at oracle.adfinternal.view.faces.renderkit.rich.table.BaseColumnRenderer.renderDataCell(BaseColumnRenderer.java:1149)
at oracle.adfinternal.view.faces.renderkit.rich.table.BaseColumnRenderer.encodeAll(BaseColumnRenderer.java:103)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2567)
at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer.renderDataBlockRows(TableRenderer.java:1932)
at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer._renderSingleDataBlock(TableRenderer.java:1601)
at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer._handleDataFetch(TableRenderer.java:1003)
at oracle.adfinternal.view.faces.renderkit.rich.TableRenderer.encodeAll(TableRenderer.java:504)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
at org.apache.myfaces.trinidad.component.UIXCollection.encodeEnd(UIXCollection.java:529)
at org.apache.myfaces.trinidad.component.UIXComponentBase.__encodeRecursive(UIXComponentBase.java:1515)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeAll(UIXComponentBase.java:785)
at oracle.adfinternal.view.faces.util.rich.InvokeOnComponentUtils$EncodeChildVisitCallback.visit(InvokeOnComponentUtils.java:113)
at org.apache.myfaces.trinidadinternal.context.PartialVisitContext.invokeVisitCallback(PartialVisitContext.java:222)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:378)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:448)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:448)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:448)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:326)
at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:443)
at oracle.adfinternal.view.faces.util.rich.InvokeOnComponentUtils.renderChild(InvokeOnComponentUtils.java:43)
at oracle.adfinternal.view.faces.streaming.StreamingDataManager._pprComponent(StreamingDataManager.java:611)
at oracle.adfinternal.view.faces.streaming.StreamingDataManager.execute(StreamingDataManager.java:460)
at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer._encodeStreamingResponse(DocumentRenderer.java:3200)
at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1245)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
at org.apache.myfaces.trinidad.component.UIXComponentBase.__encodeRecursive(UIXComponentBase.java:1515)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeAll(UIXComponentBase.java:785)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:942)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:202)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
... 34 more
]]Hello, Anuj.
Thanks for getting back to me. I did try with another browser.
Furtehr investigatio tells me that this issue is somehow caused by the domain creation process when I create a single server domain with SOA Suite and OSB. When I create a separate domain for OSB all works as expected (as far as I can tell).
Regards
Michael -
My brother gave me his old iphone when the touch screen went out on mine. It's in great shape but when I received it, it says that it needs to be connected to itunes to be restored. I have done this and it goes through the whole process then says iphone "iphone" could not be restored. unknown error code (-1). There is not a -1 code on the list and I have tried most of the suggestions.
Does my sim card need to be in when I am doing this? And any other suggestions?I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.
-
My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.
Likely this:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
Itunes unknown error code 4000
Please help! I burned a CD just fine last week, and now when I try to burn, I am getting an unknown error code 4000. I googled the problem, and I have tried just about everything. The "include CD box is NOT checked," and I went into add/remove programs and performed the repair option. I also checked to make sure my drive is operating. Nothing seems to work. Any suggestions? thanks!!
how do we clear this please
-
Unknown error code 13014 problem, this is the first time I've ever seen it.
After I upgraded my PC, I copied old libraries and music files from the old hard drive to the new one. I installed the newest version of iTunes (8.0.2) and when I plugged in my ipod, I saw something I had never seen. Guess what it is?
'Unknown error code 13014!'
I had no problems for using every function that my iPod touch and iTunes have (including Genius play list) and of course, I've been updating every version of firmwares and iTunes programs. After I googled about this incident, I figured out this problem should not be seen on the newest version of iTunes but I'm still surffering from it.
Temporally, I turned off Genius Play List and now, that error code doesn't pop up but of course, I can not use Genius Play list because of it.
I uninstalled and reinstalled iTunes, restored firmware, moved Library Extras & Genius.itdb and do them again and again. Of course, none of them worked.
What can I do? Is there anyone else who is experiencing same thing to me? How can I get my Genius Play List function back?
Please Help me. I'm desperate. :<Did you properly prep your new drive first?
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.
I think you should shutdown the installer then erase the drive per the above and start again. -
Environment: ZFD4
Windows OS: 2000 Professional Sp4
Novell Client: Tried both: 4.83SP2 and 4.91SP3
Zenworks Server: NW51 SP6
I successfully created a NAL object for an application called Delphi from
a company called NewMarket. The Application utilizes an SQL database and
runs off a Windows 2000 server. We already have one NAL object for this
application which works fine. The new object I created is for a newer
version of this appliction.
I have compared all the settings, and parameters of the new object with
the old one and all are in identical. I am not entirely sure of every
registry or INI entry though.
On trying to deploy the object, the files and registry entries of the
application seem to get copied to a point from what I can see but then it
always ends up with this error: " Unknown error occurred for application
DelphiMV92.Woodbine.OJC (id=5 [5], 5[5]).
I did a search for this error off Novell's knowledge base but came up
empty.
Any thoughts about what could be the problem?
Will greatly appreciate any help with this.
Thanks very much
KennethOriginally Posted by Craig Wilson
Export the object as an "AXT" file and mail to
Craig_D_Wilson at yahoo dot com
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared either Novell or any rational human.
"Kenneth " <[email protected]> wrote in message
news:_vl0i.484$[email protected]..
> Environment: ZFD4
> Windows OS: 2000 Professional Sp4
> Novell Client: Tried both: 4.83SP2 and 4.91SP3
>
> Zenworks Server: NW51 SP6
>
> I successfully created a NAL object for an application called Delphi from
> a company called NewMarket. The Application utilizes an SQL database and
> runs off a Windows 2000 server. We already have one NAL object for this
> application which works fine. The new object I created is for a newer
> version of this appliction.
>
> I have compared all the settings, and parameters of the new object with
> the old one and all are in identical. I am not entirely sure of every
> registry or INI entry though.
>
> On trying to deploy the object, the files and registry entries of the
> application seem to get copied to a point from what I can see but then it
> always ends up with this error: " Unknown error occurred for application
> DelphiMV92.Woodbine.OJC (id=5 [5], 5[5]).
> I did a search for this error off Novell's knowledge base but came up
> empty.
>
> Any thoughts about what could be the problem?
>
> Will greatly appreciate any help with this.
>
> Thanks very much
> Kenneth
>
I had the same type of error and found that the version of snapshot was different then the version of zen on our network. When I matched the two versioin the snapshot worked perfect. Hope this helps. -
During the Installation of LR I get an error message. Initially I didn't have enough space for the installation on the start partition drive. However, now, it should be sufficient and I re-booted the computer a couple of time, hence I would assume that the temporary installation files have been deleted.
Now, nevertheless each time I try to re-install the software I get the following messages:
ERROR: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
Since PS was installed without problems I would refrain from deinstalling the Creative Cloud and start over again.
Any hints?
ThxClaasd5335054 you will want to review the MSI log files to determine what error message is preventing the installation from completing.
ERROR: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
This is the only error information contained within Adobe Lightroom 5's installation log. The MSI log files contain the additional error messages. -
ITunes could not sync ^0 to the iPhone Unknown Error(-19) during 2.1 update
iTunes could not sync ^0 to the iPhone Unknown Error (-19) during 2.1 update
Anybody getting this? On a Win XP iTunes 8/ iPhone 3G
Thanks for any help!I got this message. After several hours of frustration...
I finally did a successful update by following various recommendations in this thread.
Maybe all or only a combination were necessary:
1) Deleted my backups. This DOES appear to be necessary, I noticed that the update was always failing when the update was going through the backup process. It was only after I deleted my backups that the update finally worked. To do this, in iTunes go to Edit > Preferences. Click on the Devices tab. Click on (select) the iPhone in the window. Click on the "Delete Backup" button.
2) Disable automatic syncing for the iPhone (don't know if this was necessary but it's one of the steps I took)
3) Make sure all your Apps are updated before trying the iPhone update. (Again I don't know if this was necessary but I did it). I updated my apps over wi-fi from the iPhone rather than via iTunes.
Important!!!!! After you run the update there will be no backup of your iPhone. You need to create a new one. To do this, right click (option-click) on your iPhone in the "Devices" list of iTunes. Select "Back Up" from the context menu.
Hope this helps!!!! -
Advent 5301 Unknown Error Code 2131
When trying to burn CD's, I get 'unknown error code 2131' and then the CD is ejected without burning.
I see some fellow users have had the same problem, but I cannot find the solution.
Can someone help please?
Thank you.It's usually a firmware issue on a drive, but it'd be best to check first.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.
Maybe you are looking for
-
Hi, im trying to get my music from my mac book pro to my ipad, i figured out home sharing my music but as soon as i close itunes on the mac book i loose all the music on the ipad is there a way to save the music on my ipad?
-
How do you sync two audio clips without a clapper board?
... so the cameras had to be well back to catch the whole shot, and to catch the sound, we used a separate audio recorder closer to the performers. In hindsight, I suppose we could have used a clapper board but if the board was close to the recorder,
-
Since I downloaded Mountain Lion 9.8.2 my Apple Mail box has been renamed with my personal password for all to see on my desktop. Not a good idea you might think but "rename mailbox is greyed out". Why and HELP!!!!!!!!
-
Snow Leopard-UpToDate---WTH!
I just tried the UpToDate enrollment program and it comes up flagged as incorrect serial number. Yet, when I enter the same info to check my warranty status, it comes up fine with my serial number. Aren't these systems integrated? It's definitely reg
-
Click through swf transparent areas
Hi all ! I have added at the top layer of my Flex application a swf picture that covers all the scene but with transparent areas. I needed actually to make a complex frame around the app that could not have been done with a simple square frame. The p