Casio C771 update to gingerbread broke my Netflix HELP PLEASE

I recently updated my Casio Gzone phone and everything seemed to be fine.  It looked better and a couple cool features.  I went to open my netflix app and to my surprise nothing.  It just blinks now wont open at all and it was working just fine when I had 2.2 now with 2.3.3 nothing. I wouldnt have done it if I was aware of this.  Everything I have read says it should work and netflix has this model on its list. They say it will work on 2.2. How do I get it back?  I would rather go back to 2.2.  I have tried to sideload it too using the latest to the newest netflix apk. Still wont work. Can anyone help?

Have you uninstalled Netflix, reboot the phone and reinstalled it from the Market?

Similar Messages

  • Rebuild screen freeze - unable to update firmware as not docking. Help please

    Hello, I've got an 8gb Zen.
    Always worked fine til I tried one of those hand crank chargers, since then I turn it on and it will freeze on the rebuilding screen.
    Ran scandisk on it - no joy.
    Wanted to try and update firmware to see if that helped but it will not connect to computer via USB. It will charge from the usb but just not connected, nothing.
    Any help appreciated. Thank you

    QRe: Rebuild screen freeze - unable to update firmware as not docking. Help please? So, it freezes on the rebuilding screen after formatting? It is very odd. Just to make sure... you have formatted (not cleaned up) the device from the Recovery Mode menu, right?
    My only suggestion now is trying to mount the device on another computer (try one with a BSD or Linux operating system) and format it from here. With some luck, you should be able to see it as a new USB dri've. I am suggesting one of these operating systems, as you have a chance to mount your player on them even if it does not boots up properly. (I did it to recover mine just before suspecting there was a discrepancy on the FATs stored of the filesystem.) In your case, you will have a chance to format the device (using a FAT filesystem, of course) from these operating systems. I am, however, surprised to see that the Recovery Mode format function does not do its work on your player.
    If your device does not boot up and freezes on the scanning/rebuilding processes there is a chance you have a problem with your filesystem instead of a fried USB port. So, there is a chance you can fix this device yourself yet.

  • After updating to ios 7.1 with my iphone 4 my apps wont update it just loads then stop help please

    after updating to ios 7.1 with my iphone 4 my apps wont update it just loads then stop help please

    Reset your iPhone.  Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
    If you continue to have issues, try downloading the apps to iTunes on your computer, then sync your iPhone using iTunes.

  • Lost apps after updating to iOS 4.2.1 Help please! =(

    I updated my iPhone 3Gs to the iOS 4.2.1 and lost a lot of my apps.
    Does anyone know how to fix this? I tried to install the apps again but I have to buy them. I don't want to pay again. They also disappeared from my iTunes in the computer. =(
    During the update, I had to restore the phone once, but I saw that it backed up all my data when I first plugged it in. I don't know what could have happened. Help please!

    All iTunes content on your iPhone - all music, movies, tv shows, and 3rd party apps should be in your iTunes library on your computer. iTunes content in your iTunes library cannot be erased when syncing an iPod, iPad, or iPhone, or when installing an iPhone firmware update. Regardless, it is a good idea to include your iTunes library with your computer's backup along with all other important data stored on an external drive or some other external media used for backup purposes only.
    Did you have Sync Apps selected under the Apps tab for your iPhone sync preferences with iTunes? If so, after downloading an app with your iPhone the app will be copied to your iTunes library automatically the first time you sync your iPhone with iTunes after doing so.
    No iTunes content on your iPhone - no music, movies, tv shows, podcasts, or 3rd party apps is included with your iPhone's backup, which is updated by iTunes as the first step during the iTunes sync process.
    You can re-download a 3rd party app and you won't be charged again for a purchased app as long as you use the same iTunes account to re-download the app that was used to purchase the app originally.
    http://support.apple.com/kb/HT2519

  • Why my ipad wont let me install Apps , update apps or my ipad software an when i go to the setting theres no sofware updates ..... Help Please ?

    My ipad dose not have the software update in the settings nor is it letting me donwload apps it keeps asking for a payment method i put the info in but it still dosent work helpp please

    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • Installing iPod update.....need help PLEASE

    Im trying to install the new software update for my 30 gb iPod and whenever I try and install a window pops up and says,
    "The iPod software update server could not be contacted. Make Sure your network settings are correct and your network connectionis active, or try again later."
    What does this mean???????

    See if anything on this page helps: iTunes 7 for Windows: iTunes could not contact the iPod software update server

  • Updating Quicktime to 7.5.5 - Help Please

    Hello,
    Currently - I am trying to create a push for the newest version of Quicktime using Zenworks. I have used 7-zip to extract the .msi file - Quicktime.msi and I do not want iTunes, nor auto updates installed. We currently have v.7.5 (861) installed. I tested this on my machine before I push it out to my users, and it runs, but when I check the version on Quicktime - by going to Help and about - it still says that I am at v.7.5 (861). To see if this is correct, I actually updated another computer directly from the website and the version on that PC was v 7.5.5 (249.13). Am I missing something here? Is there something with this new version when the .msi is extracted that does not update? I hope that someone can shed some insight as to what I am doing incorrectly. I really appreciate any help - I have worked on this project now for about 3 days, and am pretty stumped.
    Thank you in Advance

    Hello again, Thank you to everyone who at least took a peek at this issue. For some reason - I restarted from scratch again, and now it appears to be updating to the proper version now.

  • "internal error" message when trying to update to IOS 5?? Help please :(

    When i try to update my Iphone 4 to IOS 5, it does it back up etc and then comes up with a message saying there is an internal error.
    I have the most recent version of Itunes, have tried re starting my mac, turning my iphone off and on, still the same message.
    Can anyone help me please??

    And that message is exactly what? What system? What update? You need to be a lot more specific and provide more info.
    Mylenium

  • IGoogle home page not loading correctly after update to 10.0.1. Help please!

    I use iGoogle as my home page. Since the update, the page displays minimal information, no gadgets or widgets, the theme heading or anything. Just the Google search box and some basic links. Howeer, if I click on Google Classic, that page displays correctly.
    What's going on?

    Perform the suggestions mentioned in the following articles:
    * [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
    * [[Troubleshooting extensions and themes]]
    Check and tell if its working.
    May not be related to your problem but some of your Firefox Plugins are out-dated
    * Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
    * '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

  • Flash player not updating to 11.7.700.191 help please

    anyone know why this isnt updating?

    I don't work on the installer, so I'm guessing here.  If you've already selected an update preference, it would make sense to not prompt you again.  We *should* prompt you on a fresh install, or after running the Uninstaller, as you would not have a defined preference in either case.
    You can also toggle the update notification preference at any time from Control Panel > Flash Player > Advanced.
    You can choose between "Always Allow Adobe to install updates", in which case we only notify you when there's a feature-bearing dot release (on the Release channel).  We call this a "loud" release when we talk about it on the team.
    If you choose "Notify me to install updates", you'll always get that prompt.  If you choose "Never check for updates", you won't get notifications or updates.
    For Beta Channel, we never do "loud" releases.  Once a week, we send out a build of the latest branch that's ready to go.  Right now we're shipping betas of the next Flash Player 11.7 service update while we wrap up the feature work on Flash Player 11.8.  As soon as that's done, we'll start pushing out 11.8 builds.

  • TS3694 iPod could not be updated.An unknown error occurred(6).Help please!

    Just as the title says.Ask me for additional information if needed.Thanks for helping

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • Air Update Framework Issue... Help please!

    The following code is from the Air Employee Directory example
    to which I have added an Update Object, the app installs and
    updates with no problem, but as soon as the update is done and it's
    time for the app to start, the app just doesn't come up. It was
    working fine before I added the update object... Any idea on what I
    could be doing wrong?
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="absolute" xmlns:ui="com.adobe.empdir.ui.*"
    applicationComplete="onApplicationComplete()" height="100%"
    width="100%" frameRate="45"
    horizontalScrollPolicy="off" verticalScrollPolicy="off"
    visible="false"
    showEffect="Fade" xmlns:local="*"
    creationComplete="checkUpdate()">
    <mx:Script>
    <![CDATA[
    import mx.logging.Log;
    import com.adobe.empdir.commands.ui.CloseApplicationCommand;
    import mx.binding.utils.BindingUtils;
    import mx.events.StateChangeEvent;
    import mx.events.ResizeEvent;
    private function onApplicationComplete() : void
    callLater( ui.init );
    // We listen to CLOSING fromboth the stage and the UI. If
    the user closes the app through the taskbar,
    // Event.CLOSING is emitted from the stage. Otherwise, it
    could be emitted from TitleConrols.mxml.
    ui.addEventListener( Event.CLOSING, onWindowClosing );
    stage.nativeWindow.addEventListener( Event.CLOSING,
    onWindowClosing );
    stage.nativeWindow.addEventListener( Event.CLOSE,
    onWindowClose );
    private function onWindowClose( evt:Event ) : void
    NativeApplication.nativeApplication.exit();
    private function onWindowClosing( evt:Event ) : void
    evt.preventDefault();
    var cmd : CloseApplicationCommand = new
    CloseApplicationCommand();
    cmd.execute();
    ]]>
    </mx:Script>
    <mx:Script>
    <![CDATA[
    import air.update.events.UpdateEvent;
    import mx.controls.Alert;
    import flash.events.ErrorEvent;
    import air.update.ApplicationUpdaterUI;
    * @var the object that that handles the update related
    actions
    private var appUpdater:ApplicationUpdaterUI = new
    ApplicationUpdaterUI();
    * This function is triggered when the application finished
    to load;
    * Here we initialize <code>appUpdater</code> and
    set some properties
    private function checkUpdate():void {
    setApplicationVersion();
    // we set the URL for the update.xml file
    appUpdater.updateURL = "
    http://localhost/updater/update.xml";
    //we set the event handlers for INITIALIZED nad ERROR
    appUpdater.addEventListener(UpdateEvent.INITIALIZED,
    onUpdate);
    appUpdater.addEventListener(ErrorEvent.ERROR, onError);
    //we can hide the dialog asking for permission for checking
    for a new update;
    //if you want to see it just leave the default value (or set
    true).
    appUpdater.isCheckForUpdateVisible = false;
    //if isFileUpdateVisible is set to true, File Update, File
    No Update,
    //and File Error dialog boxes will be displayed
    appUpdater.isFileUpdateVisible = false;
    //if isInstallUpdateVisible is set to true, the dialog box
    for installing the update is visible
    appUpdater.isInstallUpdateVisible = false;
    //we initialize the updater
    appUpdater.initialize();
    * Handler function triggered by the
    ApplicationUpdater.initialize;
    * The updater was initialized and it is ready to take
    commands
    * (such as <code>checkNow()</code>
    * @param UpdateEvent
    private function onUpdate(event:UpdateEvent):void {
    //start the process of checking for a new update and to
    install
    appUpdater.checkNow();
    * Handler function for error events triggered by the
    ApplicationUpdater.initialize
    * @param ErrorEvent
    private function onError(event:ErrorEvent):void {
    Alert.show(event.toString());
    * A simple code just to read the current version of the
    application
    * and display it in a label.
    private function setApplicationVersion():void {
    var appXML:XML =
    NativeApplication.nativeApplication.applicationDescriptor;
    var ns:Namespace = appXML.namespace();
    ]]>
    </mx:Script>
    <mx:TraceTarget level="0" includeDate="false"
    includeTime="false"
    includeCategory="true" includeLevel="true">
    <mx:filters>
    <mx:Array>
    <mx:String>*</mx:String>
    </mx:Array>
    </mx:filters>
    </mx:TraceTarget>
    <ui:ApplicationUI id="ui" width="100%" height="100%"
    />
    </mx:Application>

    This was an issue with the Update Framework in AIR SDK 1.5.3, which has been fixed. If you still want to use the ApplicationUpdaterUI, you can replace the swc in Flex SDK 3.6 with an applicationupdater_ui.swc from a newer version of AIR.
    Have a look at solution 3 in this post for some details on where to find the applicationupdater_ui.swc and how to replace it.
    http://forums.adobe.com/message/3060118#3060118
    Hope this helps!
    Horia

  • HT4623 I am trying to update my ipod touch 4th because i updated Pandora and now Pandora does not work. My iPod does not have the "Software Update" button. Why not? Help please!

    is there something else I can do to get Pandora to play again?

    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • TS3274 App updates, not showing at all! Help, please

    I have 14 updates for some of my apps, and every time I go to the update section of my App Store, it appears blank. This has been happening for a few days, thus the amount of updates. What could be wrong, and how do I fix this?

    The update server is down; try this temporary workaround
    App Store>Purchased>Select "All"
    Note: Look out for apps that have the word "Update"
    http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg

  • Push firmware update through BES 4.17 SP7 - help please

    Hi,
    I've been asked to update the firmware on all my companies devices from our BES 4 SP7. From reading, I'm not sure whether this means the device software (version 5 the latest I think) or the OS (version 7 the latest I think). is required to be updated? What is the difference between these?
    I was wondering where I get the software from, how I can add it to the BES and how I can deploy it wirelessly?
    I imagine there are many old devices which the new firmware is not compatible. How can I find out which are compatible and which are not?
    Thank for any help.

    You other post is answered here:
    http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/Firmware-update-via-BES-help-p...
    No need to double post, one will do.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for