Casio CDP-100 not sending signal into Logic Pro...

Hi All,
I'm new at Logic Pro and trying to figure out how I can get my Casio CDP to send signal into my Logic Pro studio. I have an Mbox 2 and have connected the Mbox and Casio with Midi in/out and the Mbox is connected to my Mac through USB chord. What am I missing/doing wrong? Thanks for the help!

trying to figure out how I can get my Casio CDP to send signal into my Logic Pro
Here's something you could try. (These instructions are basically for 10.6; in 10.5 it's similar.) Find this program:
Macintosh HD/Applications/Utilities/Audio MIDI Setup
Launch it. Use the Window menu to show and view the MIDI window (which is probably called "MIDI Studio"). It should look something like this (this screenshot is from 10.5; in 10.6 it's similar):
You should see that icon marked Mbox 2. Do you?

Similar Messages

  • Casio CDP 100 not working

    I bought a Casio CDP 100 and a MIDI to USB cable. I cannot seem to get my computer to recognize the keyboard. Can someone walk me through how to set it up? I need to do this for Garageband but more importantly, Reason 3.0

    trying to figure out how I can get my Casio CDP to send signal into my Logic Pro
    Here's something you could try. (These instructions are basically for 10.6; in 10.5 it's similar.) Find this program:
    Macintosh HD/Applications/Utilities/Audio MIDI Setup
    Launch it. Use the Window menu to show and view the MIDI window (which is probably called "MIDI Studio"). It should look something like this (this screenshot is from 10.5; in 10.6 it's similar):
    You should see that icon marked Mbox 2. Do you?

  • Getting phone signal into Logic via M-Audio

    To record phone calls on my land line, I got a Radio Shack Recording Control (43-228A), plugged it up, and set it to "Record." I plugged the 3.5mm plug into an adapter for 1/4 inch plug, which went into Input 1 on my M-Audio Fast Track Pro, from which point everything else is set as usual going into my Mac's FW. I made sure I had Input 1 selected, went to record as I spoke on a test call, and -- nothing but a hummmmmm. Just to be sure, I switched from line to mic input, and that didn't affect the hum.
    Does anyone know of what details I may have overlooked here to get the phone signal into Logic? FWIW, I also tried with the chintzy little $8 suction-cup on the handset, since it also has a 3.5mm plug. Not even any hum.
    I checked the usual suspects of "DUH" carelessness within Logic itself: making sure I matched the input to the M-Audio (tried both 1 and 2 anyhow), level up high, etc.
    Also, would anyone recommend other procedures for telephone recording? I'd rather stick with land lines instead of Skype or iChat, since not everyone I'll be calling to interview will have those. Suggestions?
    Thanks,
    c

    are the xp80 audio outputs wired into UL audio inputs?

  • I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    Don't drag the midi into an open Logic project. The tracks won't set up correctly.
    'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

  • Tascam 144 No Signal in Logic Pro (MacOSx10.8.4)

    Just picked up a TASCAM US-144 MkII digital interface, which I'm trying to use to record an MXL 990 condenser mic into Logic Pro 9.ue
    The issue is that when I go into logic, arm the record button with the US-144 selected as my input device, and hit record, logic does not pick up any signal whatsoever. Not only does logic record silence, it does not seem to be detecting any signal input from the tascam (the monitors on the left of the screen in logic that detect input and output do not respond when I sing into the microphone or play an instrument through the interface). 
    The details:
    -I have installed the most recent MkII specific drivers and firmware, and both are fully updated on my computer. The tascam app seems to confirm this to me.
    -I have gone into Logic Preferences > Audio and set input device to US-144 MkII.
    -The channel strip I am using in logic was created as an 'Audio' channel, not MIDI or software instrument.
    -When I unplug the tascam while logic is open, it says 'input device removed', so Logic seems to be detecting the interface.
    -When I plug headphones into the tascam headphone jack, everything works properly and I can hear both guitars and microphones played through the device, so I believe the tascam is working fine. Again, I have tried this with both guitar line in and with different microphones, so I don't think there's a problem with the mic cable or microphone I am using.
    -In my computer's System Preferences > Sound, the computer detects the tascam as a sound input device and the input levels are sensitive to sound played into the device (that is, the input level detector peaks when I sing into the microphone or play an instrument into the tascam), so my computer is receiving input from the tascam and it is unlikely the USB cable I am using to connect the interface is defective.
    -I have exactly the same problem when trying to record in Garage Band, where the program seems to be unable to detect any signal from the tascam. Therefore it seems to be a problem with my configuring the tascam/logic and not with the actual software I am using.
    -I have been able to record without problems in the same versions of Garage Band and Logic using other interfaces.
    All software is updated, I get clear sound from the tascam, both my computer and logic can detect the device and appear to be receiving signal from it, and it's unlikely to be a problem with my cables or equipment. What could I possibly be missing??? Any help would be greatly appreciated.

    Its fine again now.. Think it was because we had set the audio tracks to no input..

  • Mainstage Ultrabeat into Logic Pro 8?

    Hi,
    Does anyone know how I could Export a Mainstage "Ultrabeat" (not just a loop but say a five minute improvision jam) into Logic Pro 8, so I could improvise over it in Logic Pro 8? Especially the rhythm combinations. Thanks!

    I think you can use something like Soundflower to route audio from one app into another.
    You can always just open the same UB channel strip setting in Logic and do everything in there that you would do in Mainstage.

  • Transferring Files from Triton Le (via Smart card) into Logic pro 9

    I'm trying to get original material from my triton Le smart card into Logic pro 9. I've looked at a couple forums and tried different ways. I know i can do it track by track/ real time audio, but would prefer having it as midi, as i've found cutting and splicing the realtime has produced some glitches in the music. The other way was to use a usb floppy disk drive save my material as midi on the floppy then open it in logic. This i've tried but must be missing something because i drag the file from my 17n1 card reader (which reads my smart card) into the floppy and it just takes the file as it is.
    This will get figured out soon, some help would be great!!!

    HI guys first thanks for all the replies  amazing that some one still listen to these post thanks ,especially i saw pancenter involved  in many logic related problems so wow man keep going thanks .
    what i did today i completlly reinstal my apple mac book pro ,instaled logic pro 8 on it and boom all is working with no problem  so this mean that Mac pro has same pice of software which is making whole thinks bad. i will try to unistal cognitone and also maybe rewire  i all ready did follow the link above (http://support.apple.com/kb/TS3968)  but it did not help i will try to unistal cognitone ( by the way it is awesome  programm ) such a sad story  or maybe i just start from scratch .will post here on progress Thanks very much guys .

  • How to import VEC1-3 packs into Logic Pro 9. help plz

    Hello everyone, not sure if this has been answered (couldn't find nothing by searching) but i need help trying to import the VEC1,2,3 (Vengeance Essential Club sound pack) into logic pro. The samples/sounds/loops are all wav format.
    any help would be appreciated. thank you!

    JSNP77 wrote:
    i need help trying to import the VEC1,2,3 (Vengeance Essential Club sound pack) into logic pro. The samples/sounds/loops are all wav format.
    There are "free download" EXS presets - look at the bottom of the [home page|http://www.vengeance-sound.com/eng/indexes/indexFreeSounds.html] "Vengeance EXS Presets" and download.
    !http://img59.imageshack.us/img59/4967/aglogo45.gif!

  • Rewire Mainstage into Logic Pro / internal soundcard

    Hey there, Logic Users!
    I noticed that some of the Mainstage sounds are not too shabby and I would like them to load into Logic Pro.
    Since my external soundcard is pretty much fried, I wanted to know if there's a way to rewire Mainstage into Logic Pro using the internal soundcard that the iMac provides?
    Thanks for all the responses,
    VN

    videonoob wrote:
    I noticed that some of the Mainstage sounds are not too shabby and I would like them to load into Logic Pro.
    Hi
    Mainstage and Logic share exactly the same plugins, channel strip settings and the like (with the notable exceptions of Playback and Loopback, which are only available in Mainstage).
    There should be no need to attempt to hook up Mainstage to Logic simplly to load any sounds into Logic. Save the plugin presets or channel strips in Mainstage, and then Load them in Logic.
    CCT

  • Dropping beat into logic pro only puts 1 minute of a 3 minute beat help

    Im taking a beat from iTunes and dropping it into logic pro x but the beat is 3 minutes long and logic pro will only take about 1 minute of the beat how do i stop it from cutting the beat that short

    1) Yes.. Either you can reinstall from the DVDs you got as part of the Boxed set of Logic Studio 2/Logic Pro or.. if you purchased Logic Pro via the app store, download it again by going to the App Store app on your new Mac and going to the purchased tab which, after signing in using your Apple ID and password, will allow you to download Logic once more.
    Note: In regards to the DVD boxed set... Some of the modern Macs no longer come with DVD/CD drives built in so you should make DMG images of your DVDs using your old Mac and the Disk utility...  and store them on an external Hard Drive which you can then contact to your new Mac and install Logic from
    2) You can select several regions at the same time and move them as you wish..
    If you hold down the option key you will actually be able to make a copy of them and when you move them the originals will still be left in place..
    See these pages of the User Guidel for more info
    http://documentation.apple.com/en/logicpro/usermanual/#chapter=13%26section=13
    http://documentation.apple.com/en/logicpro/usermanual/#chapter=13%26section=15
    There are lots of other useful information about regions and tracks found in this main section of the User Guide
    http://documentation.apple.com/en/logicpro/usermanual/#chapter=13%26section=0

  • Adobe Audition Into Logic Pro 7?

    Do you know if there is a way to import adobe audition 2.0 files into Logic Pro 7? The reason I ask is beacsue someone wants me to work on a project for them and they recorded all their tracks for 5 songs in AA 2.0. I know garage band imports fine into Logic, but what about AA 2.0?
    Any plugins out there?

    Nope... beyond Adobe and Apple not exactly being best buds... Audition is a PC only application (for now...Mac release slated for 07).

  • After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

    After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
    VIBAC

    I downloaded and installed
    OS X Lion 10.7.5 Supplemental Update
    and that solved my problem completely. (368 AU plugins now works!)

  • \  does not split regions in logic pro 8 how do I fix this

    My \ does not split regions in logic pro 8 how do i fix this ?

    Hi,
    did you check the keyboard shortcuts? You can specify each and every key in Logic, and maybe your key mapping has simply set the split regions to another key.
    Fox

  • How do I load an AU instrument (Garritan ARIA player) into Logic Pro X on a Mac Mini OSX 10.8.5

    how do I load an AU instrument (Garritan ARIA player) into Logic Pro X on a Mac Mini OSX 10.8.5 ?

    You install the player .component in the Library/Audio/Plug Ins/Components folder (though an installer probably does that for you) and install(er) the sample content wherever you want, then you start Logic (the new plug in will be validated during startup), open or create a project, create/use a software instrument track, instantiate the player in an Instrument slot, and in the player itself you choose the sound(s) you want to play and load those.

  • How do I import a project from GarageBand into Logic Pro X?

    Trying to imporrt all my projects from Garageband into Logic Pro X.

    Open Logic X.  Go to the help menu and select "logic pro help."  Type garageband into the search bar.  You will have one result to choose from.

Maybe you are looking for