Casio CDP 100 not working

I bought a Casio CDP 100 and a MIDI to USB cable. I cannot seem to get my computer to recognize the keyboard. Can someone walk me through how to set it up? I need to do this for Garageband but more importantly, Reason 3.0

trying to figure out how I can get my Casio CDP to send signal into my Logic Pro
Here's something you could try. (These instructions are basically for 10.6; in 10.5 it's similar.) Find this program:
Macintosh HD/Applications/Utilities/Audio MIDI Setup
Launch it. Use the Window menu to show and view the MIDI window (which is probably called "MIDI Studio"). It should look something like this (this screenshot is from 10.5; in 10.6 it's similar):
You should see that icon marked Mbox 2. Do you?

Similar Messages

Casio CDP-100 not sending signal into Logic Pro...

Hi All,
I'm new at Logic Pro and trying to figure out how I can get my Casio CDP to send signal into my Logic Pro studio. I have an Mbox 2 and have connected the Mbox and Casio with Midi in/out and the Mbox is connected to my Mac through USB chord. What am I missing/doing wrong? Thanks for the help!

trying to figure out how I can get my Casio CDP to send signal into my Logic Pro
Here's something you could try. (These instructions are basically for 10.6; in 10.5 it's similar.) Find this program:
Macintosh HD/Applications/Utilities/Audio MIDI Setup
Launch it. Use the Window menu to show and view the MIDI window (which is probably called "MIDI Studio"). It should look something like this (this screenshot is from 10.5; in 10.6 it's similar):
You should see that icon marked Mbox 2. Do you?

DDTS-100 not work

Hi. I recently obtained a DDTS-00. It worked fine, until today. I used it for a short while, then turned it off. I came back an hour later, tried to turn it on, but nothing happened. The red light wasn't on like normal. Power was plugged in, and the power supply felt slightly warm (but not as warm as when the DDTS is working.) The outlet was fine. I tried another outlet anyway, but had no luck. The power supply isn't generating any heat now, either.
Seems to me like the power supply isn't working. Anyone else have these troubles?

Your connection since you use the ddts-100 is digital so you use a coaxial or optical cable and the maximum speakers that can play with digital signal are 6.1.
If you want to use all of you speakers you have to connect the 4:3 cable.You can connect it directly from your soundcard to your speakers or through the cable divider .
Now if you're using the 4:3 cable check in Creative Audio Console that you check 7.1 option.
I hope I helped you.
http://forums.creative.com/creativel...ply_to_id=846#
Preview Post

New Monitor Canopus 100 Not Working in iMovie 06

My Element Electronics Monitor stopped working. I hooked up my Vizio TV to my computer and it works fine. I can get either TV, Computer, VCR etc. I used to be able to attach my Canopus ADVC100 to the monitor and I could watch TV thru iMovie. The monitor and computer recognized anything I had attached to the Canopus as a camera device ie DVD, VCR camcorder or tv. Now I cant do that thru canopus. Anybody have any ideas. I am thinking I need a monitor and not a TV.

Not easy to figure out what this has to do with iMovie 6.
I am thinking I need a monitor and not a TV
That about covers it.

Frequency distribution on ceiling(measure/100) not working always sums

I'm trying to create a frequency distribution on a measure total time in secs in usage tracking and I can't seem to get the measure to not sum.
I've tried:
case (ceiling(measure/1000) as char(5))
setting the "Treat as an attribute column" in the column formula
setting aggregation rule to "None" in the column formula
Any suggestions would be appreciated

in 11G I have found that for this to work the column you are using cannot have an aggregate rule in the rpd.

Mid casio lk 100 no work

pro 8 only plays back threw my casio but wont play when i hit the keys,
what i did. new track "software ist" i select I/O piano and hit my key board nothing. i use the caps lock GUI comes up and i can here the sound. i use the keyboard layout and it plays on my casio and i create a song and it plays on my casio, but when i try to record it only detect. im using m audio uno midisport to connect, and my casio only have two modes a local on and local off.

threw my casio but wont play
It probably broke when you threw it...

Magic Mouse - browser navigation backswipe not working.

Hey, is anyone else having a failing experience using the back nagivagation swipe function of the magic mouse?
As of OSX Mavericks install, the single swipe does not swipe back to previous pages visited.
I am sure this is a bug, and kind of surprised it wasn't caught during beta?
I am however, running dual screens (15" retina monitor, and 27" thunderbolt) but can't imagine that would make any difference.

Nadnerb, you are using the "magic" mouse correct?
I might suggest switching the power off the magic mouse, then under your bluetooth devices, remove the magic mouse. Then turn on the mouse, and reconnect it bluetooth again.
Then test the functionality of the mouse. If it still does not scroll, go into the system:mouse settings and check that those functions are enabled.
If they are, and it's still unable to scroll, is it 100% not working under Safari - or are all applications not working with the scroll? If no applications aren't working, there may be a chance that the sensor in the magic mouse failed.
Would be surprised if that was the case.

Satellite 1800-100: video-out does not work

He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
Daan

Hi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)?

AUDIODG.EXE hogging 80-100% of CPU and sound not working in Vista . . .

I posted this on a Microsoft Answers Forum but none of the techs or people reading have been able to help so far. I'm dying to get to the bottom of this:
Here is my computer:
MSI K8N Neo4 Platinum
AMD Athlon 64 3000+
2GB RAM
XFX GEFORCE 6600 GT 128MB DDR3 DUAL DVI & TV OUT (PCI-E)
200GB WD SATA HDD
500GB WD HDD in external enclosure via USB2
NEC ND-3520A 16X DVD±RW Dual Layer DVD Burner
LG CD Burner
I've been using Vista Home Premium successfully for some time. Recently, not too long after I did a clean wipe of my OS, my audio would stop working. The way it would happen is that everything would work fine until I started iTunes or another audio application and when I would hit play, things would lock up.
Upon inspection of my system resources, I'm noticing that the audio platform for Vista, via the audiodg.exe, is using close to 100% of my CPU resources, even when the computer is making no sound at all.
I've had a Sound Blaster Live! card in my computer for some time but I was not using it; I use the Realtek AC'97 audio drivers that are on my motherboard instead. I thought that the conflict may be the computer wanting to recognize my Sound Blaster, so I took it out of my computer but the problem seems to be worse.
Are there any BIOS setting that need to be adjusted for my sound to start working again?
I'm very reliant on the audio processing power of my computer (I'm in the radio industry, part-time) and this is a huge drag on my productivity.
Any tips would be much appreciated.
REPLY #1:
Thank you for using Microsoft Answers forum. I suggest going to the manufacture of your sound card and download the latest drivers and install them.
MY RESPONSE:
Good suggestion. The problem is this:
I am running on-board audio. I have an MSI K8N Neo4 Platinum motherboard which runs "Realtek ALC Series AC97 Audio Driver" and there is no version for Vista. They have a version for Windows 2K/XP and one for Windows XP 64bit.
Should I use on of those and if not, then what?
UPDATE (from me):
I took a chance and found a Realtek AC'97 driver for Vista.
http://drivers.softpedia.com/progDownload/Realtek-AC-97-Audio-Codec-Driver-Vista-6183-Beta-Download-18114.html
I went to install it and the install hung. So, I closed one of the install windows and then the InstallShield app continued like it was working. So, I hit "Restart my computer". Well, the reboot hung too. So, I reset the PC manually.
When the computer came back up, the sound worked. Hard to tell if this will fix it for good but it's promising. Chaotic. Unpredictable. Annoying.
REPLY #2:
Before you tried updating drivers, did you try rebooting 1st?
I'm just trying to determine if rebooting your system is what resolved the issue - thank you
UPDATE II (from me):
My computer is behaving the same way it was before. AUDIODG.EXE taking up 80-100% of my CPU and the sound not working.
Any other ideas?

Small update: Despite my intelligence, good looks and vast experience I use Google sometimes. To my surprise this file turns out to be a Windows one. Here is someone who is much happier, and since it is some way in my line of thinking I'll quote it, but you might take my previous advice as well:
http://forums.techarena.in/windows-vista-performance/1012315.htm
"- Open up msconfig.exe > Manage startup programs.
- Disable ALL Realtek entries
- Close msconfig.exe
- Right-click on the speaker icon > Audio devices > Speakers (properties)
- Go to the enhancements tab
- Check the box to disable all audio enhancements
- Close the menu
- Right-click on the speaker icon > Recording devices
- Disable all your microphones (yeah..., the actual problem seems to come
from voice inputs rendering..)
- Close the menu
- Restart your computer"

My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Recovery HD not working, kernel_task 100%

Hello! I have run into a major problem with my iMac and I have no idea what is going on. Help would be greatly appreciated!
The inital problem: I was using my iMac last night, mainly surfing with Safari but with several other applications open in the background (Photoshop, at least ten Safari tabs, Mail, Evernote, iTunes, Spotify, possibly a few others). Suddenly, while reading on a forum, I could no longer scroll the page with my Magic Mouse. In fact, nothing responded at all, no clicks, no keyboard presses (wired, Apple Extended keyboard), no nothing. A minute later, the pointer froze too. I shut down with the power button and restarted.
The first time, the Mac booted into my BootCamp partition. Possibly, I had made that change myself earlier and forgotten about it. Windows 7 started without a fuss, and I then rebooted into OS X.
However, OS X would not load. For over half an hour, only the grey apple and the spinning wheel. Finally, I gave up and tried to boot into the Recovery drive. After a long, long period of waiting, I finally got to the "Welcome" screen where you choose your language. However, neither keyboard nor mouse responded to input. I restarted again, this time trying Safe boot. I got past the grey progress bar, but then it halted again. Tried again, booting into the original System disk (10.5.6), which worked after a long, long time. When at the Welcome screen, the mouse did not work, but I could choose with the keyboard. After choosing, the mouse came alive. I ran Disk Utility, which reported no errors. Set Startup disk to my main partition and restarted. This time (after a long, long time of waiting), I actually came to the login screen on my boot volume. Mouse and keyboard did not respond initially, but came alive after 5-10 minutes. I could then log in. I actually managed to work for a few minutes, saving two recovered PS documents and starting Activity Monitor, before everything beachballed and I had to power down again.
I have now tried this several times. I can only get in to my OS X partition by booting to my DVD, and then choosing the 10.8.2 partition as the Startup drive. I see the same unresponsive mouse/keyboard every time at login or welcome screens. When I get into my 10.8.2 system, I can see in Activity monitor that kernel_task uses 100-110% of processor time, and often another process takes all the rest (mds, CrashReport). Once, I actually managed to quit all my running applications and do a restart from the menu, but it then hanged up on me on the grey "shut-down" screen.
Meanwhile, my Win 7 partition still works like a charm.
Any ideas about what I should do? Should I just give up and restore from Time Machine already? What could be causing the problems with the mouse and keyboard? Why is kernel_task using so much processor time?

I'm sure when Linc responds he'll have a "Real" way to fix your problem but the other day I was having a Kernal_Task run away on my MBA and after running every possibility on ONYX it seems resolved.
OnyX for Mac
http://www.macupdate.com/app/mac/11582/onyx
http://helpdesk.hsc.unt.edu/wp-content/uploads/2010/02/Mac-OS-X-10.6-run-OnyX.pd f
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

HT1212 i havnt changed my passcose and using the same passcode which i have been using since ages , its still not working, and i am 100 percent sure i am using the correct passcode ?

i havnt changed my passcose and using the same passcode which i have been using since ages , its still not working, and i am 100 percent sure i am using the correct passcode ?.,

Either way the result is the same... if you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. Help

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
I am running a 64 bit version of Photoshop from the CS6 Masters Collection
I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
The document size is 2100 by 1500 Pixels at 300 PPI only two layers

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
I am running a 64 bit version of Photoshop from the CS6 Masters Collection
I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
The document size is 2100 by 1500 Pixels at 300 PPI only two layers

100% Width rectangle not working

I followed the instructions from this article, and it is not working. Any ideas?
Creating a 100% width rectangle element that spans the entire width of a browser window.
I did everything it says to do here, but it does not scan across the browser when I preview, and the "red lines" to detect when rectangle sides are flush with the page do not appear.
I'm in CS6.

Thank you for posting.
I've created a small video to show how to create a 100% width rectangle element. Please refer to the following Link : http://screencasteu.worldsecuresystems.com/aish/2013-03-21_1414.swf
Hope this helps.
Regards,
Aishvarya Raj Rastogi

I just upgraded to iOS7 on my iPad4 and found it got bettery drained. Followed online tips but not working. In 2.5 hours w/o doing anything, the battery dropped from 100% to 77%. Help!

I just upgraded my iPad to iOS7 and got battery drain problem. I followed the tips online to turn off all the unneccessary features and seems not working. Because this morning, the battery drops from 100% to 77% in 2.5 hours and I didn't even work on it yet. The smart cover is already closed.

If you followed these steps : http://www.apple.com/ie/batteries/iphone.html , you can attempt to restore your device (back up your information first ,if you don't have a backup) and see if that changes anything. If issue persists , you can contact Applecare and explain the steps you followed . Don't forget to mention that this started happening after you updated to iOS 7 .

Casio CDP 100 not working

Similar Messages

Maybe you are looking for