Cat 4000 Sup 1 and 2 rommon upgrade release notes?

I'm trying to find the release notes for the Cat 4000 sup 2 rommon upgrades. I've looked all over CCO but haven't been able to find them. In the release notes for CatOS 8.x, 7.x etc it tells you HOW to upgrade the rommon, but it doesn't tell you WHAT it does.
I've done the 6500 sup and msfcs before and they had release notes.
These are the ones I'm looking for:
6.1.5
6.1.4
5.5.5

check the following link for upgrading the rommon for Catalyst 4000 switches :
http://www.cisco.com/en/US/products/hw/switches/ps663/prod_release_note09186a008029aa83.html#wp142218

Similar Messages

Would like to upgrade to Dragon Naturally Speaking 11 from DNS 6 (which would also entail a necessary upgrade from Windows 2000 to 7) but understand after all this expense and trouble, DNS upgrade may not be compatible with Firefox 6?

Question
Would like to upgrade to Dragon Naturally Speaking 11 from DNS 6 (which would also entail a necessary upgrade from Windows 2000 to 7) but understand after all this expense and trouble, DNS upgrade may not be compatible with Firefox 6?
Main priority is voice activation upgrade. Ideas about how to proceed appreciated!

AFAIK, it's been over three years since a WinXP laptop or desktop PC has been sold; I specifically bought a laptop in June 2008 because it was being clearanced by that retail chain to meet Microsoft's deadline, and got it real cheap. It was tagged for the store manager to purchase, but he let me have it because I exceeded his expectations for the services I performed for his store and thought I deserved it. Anything that wasn't made for Vista-compatibility will be very iffy with Win7, IMO - so that basically rules out anything that was made before like Oct or Nov 2007.
Unless another DNS 11 user happens to see this thread and can verify whether it works in Firefox 6.0 or not, I don't what to recommend except for you doing a web search to see what other DNS / Firefox users have to say about compatibility.

I have the iPhone 4s and Im using straight talk .. It use to say I had 4g now its 3g .. My data is working super slow and the straight talk says not verified, how do I get it verified ???

I have the iPhone 4s and Im using straight talk .. It use to say I had 4g now its 3g .. My data is working super slow and the straight talk says not verified, how do I get it verified ???

Hi, JoseN33.
Thank you for visiting Apple Support Communities.
Try the steps in the first article below and see if that resolves your data issue. However, with some carriers settings need to be manually entered in order to access their cellular data network. The second article will walk you through that process.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
iOS: About cellular data network settings (viewing or editing the APN)
http://support.apple.com/kb/ht2283
Regards,
Jason H.

I have a MacBook Air running OSX 10.74. I've tried 3 time to upgrade the to the latest OSX. The upgrades downloaded, but when they start to install the operation stops and says the upgrades did not install because an error occurred.

I've tried 3 times to upgrade my operating system. Each time the upgrade is downloaded, but when it starts to install the upgrades, it stops and says the upgrades were not installed because an error occurred. No mention of what the error was.
My computer is a MacBoor Air running OSX 10.74.

Hi ..
If you are trying to upgrade to Mavericks, make sure your Mac meets the requirements > OS X Mavericks: System Requirements
And make sure there's enough free storage space. Mavericks requires about 8GB's.
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
If it's not a storage space issue ...
Apps such as Little Snitch, Growl, MacKeeper, and anti virus software can prevent apps from downloading including OS X upgrades
Disable anti virus software if installed
Check the firewall in System Preferences > Security & Privacy > Firewall > Firewall Options
Make sure Gatekeeper is enabled
Open System Preferences > Security & Privacy then select the General tab.
Make sure either Mac App Store or Mac App Store and identified developers is selected.
If that area is grayed out, click the padlock icon to proceed.
OS X: About Gatekeeper

Question: i upgraded to Lion and now itune upgrade will not install (error message appears)

i upgraded to Lion and now itune upgrade will not install (error message appears)

iPhoto needs to be upgraded in order to work with Mavericks. You can do that via Software Update or the App Store.
The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
Upgrading iPhoto does not involve your iPhoto Library. Your photos will still be there. But it never hurts to make a backup first.

Upgrade release note doubt

Hi,
I have a doubt in refering the release notes. We are doing technical upgrade from 4.6C to ECC 6.0 (Enhancement Pack 3). DO we need to refer all the release notes from 4.7 till ECC SP1, SP2, and SP3 etc to get to know the delta changes? Or refering release note of ECC 6.0 EP3 is enough?
Please let me know. Points will be rewarded
Thanks,
Pradeep

Thanks somar.
I have one query. What is the role of functional consultant in technical upgrade? Please let me know.
Thanks,
Pradeep

IdMgr 7.1 - 8.1 Upgrade; Release Note Clarification

re: Upgrade path table on page 24
Identity Manager 6.0 reflects 7.0 | 7.1 | 7.1>7.1 Update 1 | 7.1>8.0 | 7.1>8.1
Identity Manager 7.1 reflects 7.1 Update 1 | 8.0 | 8.1
I am interpreting this to read that an upgrade from 7.1 > 8.1 is supported.
My questions:
Is an upgrade from 7.1 to 8.1 supported?
What is the purpose of the ">" sign for the lines relating to 6.0 and 7.0 upgrade paths?
Thank you,
Brian

Hi Brian,
While 7.1 to 8.1 is supported, you will want to look out for items like database update scripts for example in 8.1, be sure to look for the ones that state
from upgradeto81from71.oracle (i.e. to 8.1 from). The > indicates too. Run one finger from your left hand on the Current Identity Manager Version, then one finger from the right on the Target Identity Manager Version
So if one was going from IDM 6 to 8.1, the would got to 7.1 >(then) 8.1
So if one is going from IDM 7.1 to 8.1 the may proceed to 8.1 directly
Please excuse as the formatting may not make it out to the page, like the document.
Target Identity Manager Version
Current Identity Manager Version 7.0 7.1 7.1 Update 1 8.0 8.1
2005Q4M3 (6.0) 7.0 7.1 7.1 > 7.1 Update 1 7.1 > 8.0 7.1 > 8.1
IdentityManager 7.0 7.1 7.1 > 7.1 Update 1 8.0 8.1
IdentityManager 7.1 7.1 Update 1 8.0 8.1
IdentityManager 7.1.1 8.0 8.1
IdentityManager 8.0 8.1
Edited by: DiakunAtSun on Apr 7, 2009 2:34 PM
Edited by: DiakunAtSun on Apr 7, 2009 3:07 PM

Lost ability to open pdf files in Safari and Flash Player upgrade is not recognized.

Since two days ago, when I responded to a Zynga game instruction on Face Book to upgrade to the newest version of Flash Player, I lost the ability to open the game but more importantly I can't open pdf files any more either. All pdf files in Safari open as jibberish BUT they still work correctly in Firefox and Preview. Please help.

Are plug-ins enabled?
Safari > Preferences > Security
Web content:
Put a check mark in the box next to "Enable plug-ins"
Best.

I use two apps primarily FCP and Final Draft- upgrade or not?

Would like to dictate my scripts using Mavericks but If I do I will have to upgrade Final Cut Pro, and have backward compatibility issues and also Final Draft- this free upgrade will cost me hundereds if not more and a lot of time- any suggested workarounds- can I instal Mavericks for just one user?

Make a clone of your system drive. A USB 3 external hard drive will be fine. Remove the external hard drive after booting into it to make sure it works.
Install 10.9 and whatever software you want on your hard drive.
Is it worth it?
If so, keep going.
If not, clone your USB 3 drive back over to your MBP hard drive and revert to where you were.
x

Where do I find SPARCengine AXi Update and Release Notes?

I'm looking for the OBP updates, and all release notes for the updates, so that I can flash the two I have recently obtained and add the intervening release notes to the manual I printed out for the boards.
Also, I'm looking for the OBP dropins compatible with the SPARCengine AXi.
I've tried SunSolve, but haven't really turned up anything close.

Well, I was playing around with FreeBSD initially on the 4 gig disk that did work, but there are a lot of things in the FBSD ports tree that need work to get going on the SPARC. I love FBSD, and run it on intel boxes, but work is needed on it.
I may devote one of the 18 giggers (when I get another SCSI cable, or an external case) to FBSD to do some porting work for the project...
Anyhow, I have successfully installed Solaris-SPARC-u1 on it, and the only problems I saw were in the freeware, where stuff like emacs would coredump on exit (from the package), or fail to compile (segfault on the blessmail module).
I have just installed Solaris-SPARC-u2 (6/06) on it today, and so far have no issues, but I do want to test the issue with emacs again.. I'll be pissed if emacs has issues on this, vi sucks (EMACS makes the sun shine! EMACS makes the birds sing! EMACS makes the grass grow green! It's a pretty good editor too!).
By "RTC" I mean the RealTime Clock / CMOS battery-backed NVRAM / IDPROM chip. Refer to the OEM Technical manual for the AXi for details on where it is on the board. They are field replacable and socketed.
The RTC in the AXi board is a SGS (ST) M48T59Y, and you can find the datasheet at: http://www.st.com/stonline/products/literature/ds/7001.pdf and you can find out how to replace it, and reprogram your hostid and MAC, etc at: http://www.squirrel.com/squirrel/sun-nvram-hostid.faq.html the chip is avaqilable from Mouser Electronics, probably Digi-Key as well, among others. Keep in mind they have an embedded lithium cell, and have a lifespan between 7 and 10 years.
As far as fans, I have 300 MHz CPUs in these right now, until I can find the Sun fans and mounting brackets... In the meantime, the fans are connected to the main power supply directly. As far as LEDs, I don't see how that could cause a problem, as a reverse-biased diode simply won't pass current.
Anyhow, I have had some cheap fans fry intel motherboards when they die and freeze up, so, I think I'll even direct-connect the CPU fan to the power supply when I get some of the 440's...
As for Solaris 10, I don't have any problems other than the one issue, but I do have one issue launching from a remote Xnest on my PC, but, for some reason, it works fine when I use the kdm remote login from the main kdm login screen on my pc. For some reason Xnest will do the dtlogin stuff fine, but it will never launch CDE and immediately go back to the dtlogin screen. The answer might be in the Xservers file in the /usr/dt/config directory, but it uses some wierd bastardized form that isn't standard Xservers, and will coredump dtlogin if it isn't in the form expected. I think the key is in finding out what the hell "Class" a foreign Xnest is.
Anyhow, I'm having fun, and only have one more complaint.. I can't set the font size on anything other thant he output and editor windows in Sun Studio 11 (which I also installed today). IMHO, the fonts are a bit small.

Question on 4510E+R with Sup7E, redundant sups, both IOS and ROMMON upgrade

I found the procedure for a non-disruptive IOS upgrade for a dual-Sup7E 4510E+R using the...
redundancy reload peer
redundancy force-switchover
.....commands to maintain switch availability during IOS upgrades.
Can I use the same procedure for a ROMMON upgrade? I will not have console access and must do it remotely.
This is what I have:
Current ROM: 15.0(1r)SG5
Current IOS: bootflash:cat4500e-universalk9.SPA.03.03.02.SG.151-1.SG2.bin
This is where I want to go:
New ROMMON: cat4500-e-ios-promupgrade-150-1r-SG11
New IOS: cat4500e-universalk9.SPA.03.04.05.SG.151-2.SG5.bin
config-register is currently 0x2102
Current bootvar:
boot system flash bootflash:cat4500e-universalk9.SPA.03.03.02.SG.151-1.SG2.bin
Questions:
1) Can I upgrade the ROMMON first, then IOS?
2) If #1 is true, is there any problems with a temporary scenario where each Sup is running a different ROMMON version?
Proposed proceedure:
3a) Upgrade ROMMON on standby Sup
3b) switchover to make the standby active
3c) Upgrade ROMMON on the original active Sup
3d) Upgrade IOS on the original active Sup
3e) switchover to make the original Sup active
3f) Upgrade IOS on the original standby Sup.
Thanks for any feedback.

Hi Eric,
There are 2 ways to upgrade:
1-Load the IOS version you want to both Sups, change the boot variable, so the switch can load the new IOS after the reboot and finally reboot the chassis.
2-Use ISSU see link:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/prod_white_paper0900aecd806f0663.html
As for the ROMMON, you usually don't need to upgrade it often and you can always do that later if you need to. I think, some of the newer versions of IOS upgrade the ROMOM as well as the main image but I am not sure exactly for what platforms.
HTH

Rommon upgrade on 4506 Sup 7-E

Hi!
I need to do a rommon upgrade on a Catalyst 4500 Supervisor Engine 7-E, to run "cat4500e-universalk9.SPA.03.06.02.E.152-2.E2.bin" is the "only" thing I need to do on the Sup:
1;upload the file, tftp the rommon file (cat4500-e-ios-promupgrade-150-1r-SG11)
2;reload?
with the command:
upgrade rom-monitor file bootflash:cat4500-e-ios-promupgrade-150-1r-SG11
Sorry, I have searched the internet but just want to be sure.
Thanks a lot for any help!

the upgrade rom-monitor is only on certain router models?
This command is only for routers.
Ok, so when upgrading on a 4506 you only need to put the file in the bootflash and reload, that's it?
I have no idea how to upgrade Sup6 and earlier. Sup7 & Sup8 has three methods of upgrading the IOS: One using telnet and two using remote connection.
SO I have no idea which method you're talking about because it's not as "straightforward" as it seems. The bootstrap file needs to be run FIRST before the IOS is run.
upgrade rom-monitor file bootflash:cat4500-e-ios-promupgrade-150-1r-SG11
This command won't work.

Power for 4500E upgrade to Sup-8 and 5 WS-X4748-UPOE+E line cards

I can't seem to find any documentation on the power requirements for a 4500E chassis with a SUP-8 and five WS-X4748-UPOE+E line cards. I'm currently running two PWR-C45-1300ACV in this chassis but suspect I may need a power increase to support the new UPOE modules.

Hi hhorton, Can i ask what modules are you trying to add on your current power and is there a dedicated circuit for the power? for further assistance please feel free send me an email so I can help you look for the best power supply for your situation hope to hear from you soon
Regards,
[email protected]

Router ROMMON upgrade - your opinions

Hello,
I've read in several documents that there is only a need to upgrade ROMMON if there are new features in new ROMMON versions.But, e.g. the ROMMON upgrades for the Cisco 2800 platform, the changelog for 12.4(13r)T5 says "Enhancement for device access in certain Cisco routers.",
12.4(13r)T6 says "DRAM access optimization" and 12.4(13r)T11 says "write/erase timeout increase + status read changes".
Or with the Cisco 2900 platform, the changelog for 15.0(1r)M10 says:
Saving of IOS config sometimes fails on some 2900s (Fix in ROMMON)
-    Bootflash access timing parameter change.
Compact Flash timing parameter changes (ROMMON)
-    Compact flash access timing parameter change.
I think the bug "Saving of IOS config sometimes fails" is not a small one. And I don't know what "DRAM access optimization" or "write/erase timeout increase + status read changes" exactly does.
Is it still true to upgrade ROMMON just in case there are new features which are needed. Or should the ROMMON be upgraded just as the IOS if a new version with fixes is available?
Thank you for your opinions.

Disclaimer
The    Author of this posting offers the information contained within this    posting without consideration and with the reader's understanding that    there's no implied or expressed suitability or fitness for any purpose.   Information provided is for informational purposes only and should not   be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In    no event shall Author be liable for any damages whatsoever (including,   without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Just like with IOS upgrades, generally most would upgrade if there's a new feature or bug fix that pertains to you. When neither is true, most prefer to not upgrade; "it ain't broke, don't fix it".
Consider many software releases are for bug fixes, so although you might not have bumped into a known defect, you may. This would argue for upgrading all maintenance fixes. However, sometimes, maintenance for defects introduces other defects. This argues only do an upgrade if operationally necessary.
So, whether it's an IOS or ROMMON upgrade, it's really what you think is best.
PS:
BTW, for some platforms like the 2800, I recall an effective ROMMON update would force an immediate reload, unlike a IOS upgrade which can be loaded onto flash and the reload scheduled for later. (Suspect this is why Leo insures there's a new IOS on the 2800 before he does the ROMMON upgrade.)

TL-WR841N - Cheap and good router upgrade!! :)

Just thought I'd share me experience with the TL-WR841N router. Can pick these up for around £20 and it has made SUCH a difference. I've only had this plugged in for an hour so, if my experience changes I'll keep you guys posted, but so far its rock solid and super fast. THIS IS FOR INFINITY, NOT ADSL.
Setup was easy. Plug it in, dial up '192.168.1.1' in your browser address bar. Use the quick setup to get connected and it should choose find PPoE automatically. Put in "[email protected]" as your username and "password' as your password (it needs to have something as a password and BT doesn't require one). Then voila, connected!
You then need to set your wifi up, all available through the menus on the left. I found Wifi channel 13 to be best (not available through HH3). Use a program like inSSIDer to scan local wifi useage (available on android and iphone also) and find a clear channel with little to no overlaps.
Use WPA-PSK/WPA2-PSK encryption as this is most secure. Wifi is on and open as default.
Under the DHCP menu button I added some improved DNS servers:
194.72.9.34 - BT 30 GB
194.72.9.38 - BT-8 GB
208.67.220.220 - OpenDNS
^These were the fastest 3 I found using a program called "namebench".
There's many more basic settings to play with, but these are probably the most important.
Below is a speed test I ran when everything was setup, and yes. This is via wifi!!!
The router firmware can be upgraded to OpenWRT. I haven't done this yet, nore have I upgraded the installed firmware.
Hope this helps someone. Will let you know how stable it is at a later date after running it for a couple of weeks and doing a bit of online gaming over it.

Just received this router.
So far i'm glad I bought it.
With the home hub I could never get more than 50megs of speed while going through a gigabit switch connected to a TP-Link powerline adaptor.
Now I'm getting 75megs.
The wireless speed is still as slow as ever though. Although thats probably the fact that every wifi channel is being used where i live.
Now I'm hoping I dont get all the NAT problems I was getting with the home hub.
EDIT:turned out a driver update I got of windows update 2 days ago slowed my wireless right down. Just rolled back the driver and am now getting just under 60megs wireless. Thats twice what I used to get on the home hub 3.
So not only am I getting full speed wired via powerline adaptors i'm getting wireless that is twice the speed I got off the home hub 3

Cat 4000 Sup 1 and 2 rommon upgrade release notes?

Similar Messages

Maybe you are looking for