Cat 4006 S3 - Attached hosts Net access very slow prior to reboot

I have a CAT 4006 sup III running 12.1(11b)EW1 with a number of servers attached. Users started having problems accessing servers. After investigating all the impacted servers were connected to the same switch. The switch was appeared to be operating normally. Show proc cpu, show proc mem, show logging, and ping tests all normal. Warm booted switch and asics on sup failed bootup diag. Cold boot of the switch got it back up and running. Cisco Tac reviewed the post problem sh tech with no findings.
Any ideas?

No L2 loops and it was a hopefully isolated incident. We have to switches that are identical in hardware and IOS and only one was impacted.
clients of systems attached to the switch would have intermittently slow or non existent access to the host systems. Problems included saving files on network drives, email down, very slow or failed logins, application launches were slow or failed.
No messages were showing up in the switch log, let alone messages referred in the tech note. We have had asic issues on line cards in the past. Those instances were on different switches and created volumes of errors.
Layer 2 seemed fine. Pings were worked without fail. Console broadcast messages from host systems on the impacted switches made it out to clients.
Keep thinking it wasn't a switch problem but the reboot did fix the issue.
I will be replacing the sup card and doing a IOS upgrade this weekend.

Similar Messages

Online RPD access very slow from the server

Hi Experts,
When we try to access RPD from the production it was very slow.
Is there any setting to make it fast.
Thanks in advance for your ideas.
Regards,
RMD

Yes,
Install a bi server component in windows box(which is there in same network of your production machine). This is dedicated box for rpd changes...
Now, point AnalyticsWeb(which comes default) machine name to: the linux box (production) where online rpd is there...
this machine name should be mentioned in Server field while configuring AnalyticsWeb DSN.
this way, you can make online changes for prod rpd.. This is because, we can't open rpd in linux box as there with windows..
Thanks for making me to recollect this valuable information... :)

My ipad is very slow. Already rebooted it and still has the problem.

I have an ipad 3 and istalled Ios6 three weeks ago. It had no performance problem. Today, the ipad is running slow. When typing, it takes a while until the letters fo to the text boxes. When using intensive touch screen apps, it takes 2 sseconds to move something. Even typing the access password, it slows down. I already rebooted it, closed evry app but it continues to underperform. It's really very slow and cant be used in any app.

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Cdrom access very slow on many computer model

When my pc boot on pxe it hang just before the prompt and each time i
open img. The cdrom light blink and i hear the cdrom spinning.
So the script i created that delete each partitions then create 3 new
one and dump from network is very long, because it call img about 12
times...
Thanks
Pierre Boisvert

On Fri, 09 Dec 2005 13:42:38 GMT, Pierre wrote:
> I tested also on a HP D530 and it was ok, but if put a usb cdrom it
> will hang like the others.
there has been some problems with cdroms... I think the best bet would be
to raise a SR with NTS, as they probably will require access to the
hardware..
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Ssh access very slow to some accounts

I have OS X Server 10.6.2 up and running. If I ssh from a client machine to the server as the admin user, I get a password prompt, and on entering the password I immediately get to a shell prompt. If I do the same but specify another user, I get a password prompt and then there is a long wait of about a minute after entering the password before I get a shell prompt.
I believe I have DNS set up correctly. Both forward and reverse DNS is working for both addresses on my local network and for external addresses. Running the "sudo changeip -checkhostname" command shows no problems.
On examining the logs I see a few worrying looking entries such as:
Dec 14 11:10:39 mms edu.mit.Kerberos.CCacheServer[1478]: launchctl start error: No such process
But I still see that the user that saw the long delay before logging in successfully has valid Kerberos tickets, as per the output of the "klist" command:
mms:~ sh$ klist
Kerberos 5 ticket cache: 'API:Initial default ccache'
Default principal: [email protected]
Valid Starting Expires Service Principal
12/14/09 11:31:04 12/14/09 21:31:04 krbtgt/[email protected]
renew until 12/15/09 11:30:33
12/14/09 11:31:34 12/14/09 21:31:04 host/[email protected]
renew until 12/15/09 11:30:33
Which would imply that Kerberos is doing its job correctly?
Any suggestions about what might be causing the delays I'm seeing and what I might do to correct the problem?

I'm still struggling with this and drawing a blank searching for similar reports. Does anyone else see this problem? I'm beginning to suspect it might be something unique to my setup.
To add a further piece of information, the home directory of the account which is slow to connect to is an afp mount and the first thing I see in the system log after the long delay is a line like the following:
Feb 9 11:21:36 mms sshd[50749]: afp home directory mount succeeded
A pwd run from this account shows:
/Network/Servers/mms.marske.local/Users/sh
and the mount command shows the following info:
map -fstab on /Network/Servers (autofs, automounted, nobrowse)
I was thinking that maybe it was the afp automount that was taking so long except for two things.
1) The disk is local to the server, and
2) If I logout of this account an issue the command "ls /Network/Servers/mms.marske.local/Users/sh" from another account, the directory listing returns immediately.
Any thoughts?

Windows File access very slow......

Hi !
I´m working with a DP800 Quicksilver, with OS-X 10.4.5.
(1,5 Gig Ram, 500 Gig Hitachi ATA 66 HD)
Via ftp, I got transfer rates (up-and download) Quicksilver
to my linux-samba-machine of 10 MegaBytes / second !
Via CIFS (OS-X Network environment),
to the same samba machine only 50 KBytes /second....
(windows xp, 2000, 98 AND the same mac (old harddisc,with os9.2+ thusby Dave) works with 3-5 Megabytes / second.
So what´s wrong with the filesharing under OS-X ?
(DNS Name resolution, ping etc. everything works fine)
thank you for any comments,
with compliments
martin
Quicksilver DP800 Mac OS X (10.4.5)

Hi,
Whether the issue occurs on using all systems (Windows 7/8/server) or only specific systems? Please test to access the same share folder on different computers to see the result.
Also try to install the following hotfix on that server to see the result. If client systems are Windows 8/8.1/2012/2012 R2, install this hotfix as well.
Transferring files by using SMB2 or SMB3 causes memory leak on a Windows computer
https://support2.microsoft.com/kb/2928360/en-us
Also here is an article for troubleshooting such network related issue:
[Forum FAQ] Troubleshooting Network File Copy Slowness
https://social.technet.microsoft.com/Forums/windowsserver/en-US/1023eab5-d609-485b-930e-db5a9352e420/forum-faq-troubleshooting-network-file-copy-slowness?forum=winservergen
First of all pelase try "1.2 Check, Enable and Disable SMB Versions in Windows operating systems" - disable SMB2/3 to see if issue persists in SMB1. This is just for testing and you can re-enable after testing.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Hard Drives Access VERY slow. Can u pls advise what to check. THANK YOU.

If my MacPro is sitting idle for a few moments when I go to access one of the internal HD's, either one, it takes for ever to spin up and access. Most common is when I am in an application and use File/Open then have to wait at least 15 seconds for the drive/folder/file window to open.
Any ideas please. I'm at latest rev.
Thank you.

Thank you smokerz, I've got the energy down to never and have just dragged the two HD's into Privacy, I'll post if this helps.
Tom

Emac loads net pages very slow why ?

hi guys need your help my emac loads internet pages once it thinks it ok to do so..
what can cause this and i cant update it on apple site for update browser need hlp asap
thx abdul
its bog standerd

TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/
SeaMonkey seems pretty fast also, with many options...
http://www.seamonkey-project.org/
http://www.seamonkey-project.org/releases/

Very very slow file access iSCSI NSS on SLES11/XEN/OES11

Hi,
Like many Novell customers while carrying out a hardware refresh we are moving off traditional Netware 6.5 to OES11 and at the same time virtualising our environment.
We have new Dell Poweredge 620 serves attached by 10gig iSCSI to Equalogic SAN
Installed SLES will all patches and updates and XEN and then created OES11 SP2 virtual machines, these connect to NSS volume by iSCSI
Migrated files from traditional netware server to new hardware and stated testing and ran into very very slow files access times
A 3.5mb pdf file takes close to 10 minutes to open from local PC with Novell Client installed, same if no client and open via cifs. Opening same file off traditional NW6.5 server takes 3-4 seconds.
We have had a case open with Novell for almost 2 months but they are unable to resolve.
To test other options we installed VMWare ESXi on the internal usb flash drive and booted off that, created same OES11 VM and connected to NSS on SAN and same pdf open in seconds.
The current stack of SLES11/XEN/OES11 is not able to be put into production
Any ideas where the bottleneck might be? We think is in XEN.
Thanks

Originally Posted by idgandrewg
Waiting for support to tell me what the implications are of this finding and best way to fix
Hi,
As also mentioned in the SUSE forums, there is the option of using the Equallogic Hit Kit. One of the tools, next to the great autoconfigure options it has, is the eqltune tool.
Some of the stuff that I've found important:
-gro is known read performance killer. Switch if off on the iSCSI interfaces.
- if possible (meaning you have decent hardware), disable flowcontrol as this generally offers stability but at the cost of performance. If your hardware is decent, this form of traffic control should not be needed.
-To have multipath work correctly over iSCSI and starting SLES 11 SP1. Make sure kernel routing and arp handling are set correctly (not directly relevant if you only have 1 10 GB link):
net.ipv4.conf.[iSCSI interfaceX name].arp_ignore = 1
net.ipv4.conf.[iSCSI interfaceX name].arp_announce = 2
net.ipv4.conf.[iSCSI interfaceX name].rp_filter = 2
Test if traffic is actively routed over both iSCSI interfaces:
ping -I [iSCSI interfaceX name] [iSCSI Group IP EQL]
-Make sure network buffers etc are adequately set as recommended by Dell (set in /etc/sysctl.conf):
#NetEyes Increase network buffer sizes for iSCSI
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_rmem = 8192 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216
net.core.wmem_default = 262144
net.core.rmem_default = 262144
-Settings for the /etc/iscsi/iscsid.conf I'm using:
node.startup = automatic # <--- review and set according to environment
node.session.timeo.replacement_timeout = 60
node.conn[0].timeo.login_timeout = 15
node.conn[0].timeo.logout_timeout = 15
node.conn[0].timeo.noop_out_interval = 5
node.conn[0].timeo.noop_out_timeout = 5
node.session.err_timeo.abort_timeout = 15
node.session.err_timeo.lu_reset_timeout = 20 #Default is 30
node.session.err_timeo.tgt_reset_timeout=20 #Default is 30
node.session.initial_login_retry_max = 12 # Default is 4
node.session.cmds_max = 1024 #< --- Default is 128
node.session.queue_depth = 128 #< --- Default is 32
node.session.iscsi.InitialR2T = No
node.session.iscsi.ImmediateData = Yes
node.session.iscsi.FirstBurstLength = 262144
node.session.iscsi.MaxBurstLength = 16776192
node.conn[0].iscsi.MaxRecvDataSegmentLength = 131072 #A lower value improves latency at the cost of higher IO throughput
discovery.sendtargets.iscsi.MaxRecvDataSegmentLeng th = 32768
node.session.iscsi.FastAbort = No # < --- default is Yes
-Have Jumbo frames configured on the iSCSI interfaces & iSCSI switch.
If you are using multipathd instead of the dm-switch provided with the Equallogic Hit kit, make sure the /etc/multipath.conf holds the optimal settings for the Equallogic arrays.
Ever since Xen with SLES 11 SP1 we have been seeing strong performing virtual servers. We still use 1GB connections (two 1GB connections for each server, serving upto 180~190Mb/s).
There could be a difference with the 10GB setup, where multipath is not really needed or used (depending on the scale of your setup). One important thing is that the iSCSI switches are doing their thing correctly. But seeing you've already found better results tuning network parameters on the Xen host, seems to indicate that's ok.
Cheers,
Willem

Macbook pro mid-2012 13" has very slow disk access

Until 3 days ago my macbook pro mid-2012 13" running OX 10.8.3 was running fine. Then, it showed very slow response anytime it had to access the hard disk. After doing the usual checks and disk first aid repairs to no avail, I booted from my external disk with an older copy of my hard disk and everything then worked as normal, except when I accessed the internal hard disk, then it crawled once again (spinning beach ball, took many seconds just to open a finder window and then several minutes to display the contents). I ran the Apple Hardware Tests and it said everything was fine, even though it tooks several minutes before the test would actually start. I also ran the program BlackMagic Speed Disk to find out if the disk was having transfer speed problems and it showed a respectible transfer rate (60MB/s), not great but not like the 0.3MB/s I was getting when I tried to back up the internal disk. I was using Carbon Copy Cloner to try to back up the internal disk but had to give up since at 0.3MB/s, it would take days to back up the 250GB on the disk. I found on the web that using "restore" in Disk Utility, I could do a disk copy without the file by file copy which allowed me to back up my disk in "only" 6 hours. Booting from my newly made copy on an external disk worked fine and ran at nearly normal speed (slightly slower since it was an external disk running through USB2). As a final attempt to prove this was a disk problem, I erased the internal disk and reinstalled OSX 10.8. I am still waiting for this install to finish, it has been 5 hours although the progress bar said it should be done in 20 minutes. This was fairly convincing evidence that it is not a software or settings problem. However, all my web searches could find no other case of a problem like mine. I presume I have a failed hard disk but as all the diagnostic programs say it is working fine, I was hesitating to bring it in without hard diagnostic evidence. If anyone knows what might be the problem, it would be much appreciated to hear from you.

It should not take 5 hours to install Mac OS X. There is something wrong with the disk. Try reformatting where you do a wipe of the drive (an select the option to write zeros which will remap bad sectors). Then try to install MAc OS X.
I got this information from here:
http://reviews.cnet.com/8301-13727_7-20064489-263.html
Back up your data.
Use Time Machine or a system cloning utility to create a full and restorable backup of your data. If you suspect bad blocks, then when cloning you might consider not using a "block-level" copy process, since this will likely run into problems.
Boot to the utilities DVD.
If you have a boot DVD for a tool like Drive Genius or another drive utility, then boot to that; if not, use your OS X installation DVD (once you select your language, open Disk Utility from the Utilities menu).
Format the drive.
Using your selected utility, format the drive and check for bad blocks. If you are using Disk Utility, click the Erase tab, click the Options button, and then select the option to write zeros to the disk (you do not need to do multipass erase options, as this will provide no additional benefit for managing bad blocks). Writing to zeros may take a couple of hours depending on the size of the drive, but when done the drive will have remapped any blocks that were not reliably read.
Restore the OS installation.
If you have used Time Machine to create your backup, boot to your OS X installation DVD (if you are not using Disk Utility) and use the option in the Utilities menu to restore from backup. Attach your Time Machine drive and then proceed with the restoration, selecting the newest backup as the one to restore to your system. If you have used a system cloning tool, then attach the cloned drive and boot off of it (hold the Option key at start-up to select it from the boot menu). When you are booted to the cloned drive, run your cloning utility to copy the installation back to the computer's main boot drive.An optional approach here is to perform a full reinstallation of the OS from your installation DVD, and then migrate your data, applications, and settings from either the clone or the Time Machine backups using Apple's Migration Assistant.

Access 2007 very slow on Windows 7

Access 2007 is running very slowly in on two new Windows 7 clients. By slow, I mean the response time within Access - moving from screen to screen is dreadfully slow, taking 30+ seconds on Windows 7 to do what a computer with Windows XP will do in
1 second.
I cannot find any information that addresses the issue.
We have been running Windows XP SP3 clients successfully for almost a year. The speed is virtually instantaneous. The Access file is hosted on a file server, Windows Server 2003, with SQL Server Express 2008. Nothing has changed on the
server. The Windows XP clients previously and currently experience no problems.
The first of 2 new computers were deployed with Windows 7, with OS pre-loaded from Dell. Microsoft update was run to update OS and Access. Once discovered that Access was running brutally slow, I used the other new PC to test. Windows 7
freshly installed. Office 2007 freshly installed. Tested - still slow. Ran Windows Update, then re-tested. Still slow.
The issue reminds me of the slowness experienced when we were developing the Access database on my laptop which was running Vista. So, it runs fine on XP, but not on Vista or 7.
I'm convinced the problem is a conflict with Windows 7 on the client, but cannot pinpoint it. I've searched these forums and Google for answers, but have not found any information that has specifically addressed this issue. Can anyone offer assistance?

After reading numerous forums , I was able to resolve
the following issues (Screens Freezing, Screens Lag/Flickers, combo/list boxes freezing whilst searching for data) by carrying out the following:
Creating a brand new copy of the MS Access database in MS Access 2007/2010 using the Windows 7 image
Importing the database objects (tables queries, forms, reports, macros and modules) into MS Access 2007 /2010 d/b within the Windows 7 image.
Setting the
MaxBufferSize of 16384 (Decimal), HKEY_LOCAL_MACHINE (regedit) onto various PCs as recommended by various forums.
Making sure that the relevant reference libraries have been selected for MS Access 2007. This should automatically set throughout the default
installation as demonstrated below:
Visual Basic For Applications
Microsoft Access 12.0 Object Library
OLE Automation
Microsoft DAO 3.6 Object Library
Microsoft ActiveX Data Objects 2.5 Library
Also by typing in the following words into Google, provided me with some solutions, however the instructions above allowed me to rectify the issues
experienced above.
MS Access 2007 slow in Windows 7
MS Access 2007 and Windows 7 issues
MS Access 2007 freezes
Performance slow with MS Access and Linked Tables
Slow performance windows 7 using MS Access

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often and while surffing on net it gets very slow ...

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Telnet from Windows PC is very slow to Solaris x86, after Net linked

(Sorry about the re-post. I posted in the wrong group earlier)
I got the following info from this forum, in regards to configuring my Solaris x86 to link to the Net:
# echo 192.168.0.1 > /etc/defaultrouter
# route add default 192.168.0.1
# echo nameserver 192.168.0.1 >> /etc/resolv.conf
# cp /etc/nsswitch.dns /etc/nsswitch.conf
So I did the above steps, reboot the Solaris, and my Solaris system can link to the Net fine afterwards. But ever since it had Net access, another problem is created.
Whenever I telnet using a command line from a Windows XP computer, it takes a long time to telnet to this Solaris system. Before, I would see the Solaris login prompt for telnet in a few seconds. Now, it's about 1 minute. Plus, if I try to use an xterminal software from that PC to link to the Solaris x86, it hangs.
So after I undo all the 4 commands above, reboot the Solaris computer, all these problems disappear. I can telnet from my Windows PC to this Solaris system very quickly. However, I no longer have Internet access from my Solaris.
Anyone knows how I can fix this problem? Thanks.

It sounds like a name resolution issue. Can you post the contents of your /etc/nsswitch.conf file for us?

Host-based access restrictions

What is the preferred method for implementing host-based access restrictions in Directory Server 5.2?
I am setting up Solaris 9 clients using the native LDAP client.
I tried setting up host-based access using netgorups, and it works great, but found the user's group associations stopped working. Only the default group shows up.
Removing netgroups allows any valid user to authenticate to any host. Very bad.
As a last resort, one could add an ACL for each user in the LDAP server specifying which hosts he can bind from. But then again, it's the proxyagent that will be binding.
There has to be a better way to do this. Absolutely no info on this in the admin guides.

Solaris10u6 (Solaris 10 10/08) added a pam_list module that appears to do what your asking about from a brief glance at the whats new.

Access Server through VIP (ACE 4710) but very slow

Re: Access Server through VIP (ACE 4710) but very slow
Hi Shiva
Kindly Help .....Accessing the server very slow.., Plz check my real configuration... this configuration is for application server and after this i have to configure more serverfarm for different server like webmail etc. in this ACE 4710. I have only one ACE 4710 .
ACE Version A4(2.0) = is there supports Probe with this version.??? without probe server will work but very slow. And plz guide Nat-pool is required
VIP :-- 172.16.15.8
LB/Admin# sh run
Generating configuration....
no ft auto-sync startup-config
logging enable
logging host 172.29.91.112 udp/514
resource-class RC1
limit-resource all minimum 10.00 maximum unlimited
boot system image:c4710ace-mz.A4_2_0.bin
hostname LB
interface gigabitEthernet 1/1
description Management
speed 1000M
switchport access vlan 1000
no shutdown
interface gigabitEthernet 1/2
description clientside
switchport access vlan 30
no shutdown
interface gigabitEthernet 1/3
description serverside
switchport access vlan 31
no shutdown
interface gigabitEthernet 1/4
no shutdown
context Admin
description Management
member RC1
access-list everyone line 8 extended permit ip any any
access-list everyone line 16 extended permit icmp any any
probe http probe1
description health check
interval 5
passdetect interval 10
request method head
expect status 200 200
open 1
rserver redirect https_redirect
description redirect traffic to https
webhost-redirection / 302
inservice
rserver redirect maintenance_page
description maintenance page displayed
webhost-redirection /sry.html 301
inservice
rserver host web1
ip address 192.168.10.3
inservice
rserver host web2
ip address 192.168.10.4
inservice
rserver host web3
ip address 192.168.10.5
inservice
serverfarm host http
rserver web1
    inservice
rserver web2
    inservice
rserver web3
    inservice
serverfarm redirect https_redirect_farm
description Redirect traffic to https
serverfarm redirect maintenance_farm
description send user to maintenance page
parameter-map type connection paramap_http
description parameter connection tcp
exceed-mss allow
sticky ip-netmask 255.255.255.0 address source Sticky_http
timeout activeconns
serverfarm http
class-map match-all REMOTE-ACCESS
class-map type management match-any remote_access
2 match protocol xml-https any
3 match protocol icmp any
4 match protocol telnet any
5 match protocol ssh any
6 match protocol http any
7 match protocol https any
8 match protocol snmp any
class-map match-all slb-vip
2 match virtual-address 172.16.15.8 tcp eq www
policy-map type management first-match remote_access
class class-default
    permit
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
    permit
policy-map type loadbalance first-match slb
class class-default
    serverfarm http
policy-map type inspect http all-match slb-vip-http
class class-default
    permit
policy-map multi-match client-vips
class slb-vip
    loadbalance vip inservice
    loadbalance policy slb
    loadbalance vip icmp-reply active
    inspect http policy slb-vip-http
    connection advanced-options paramap_http
interface vlan 30
description "Client Side"
ip address 172.16.15.24 255.255.255.0
access-group input everyone
service-policy input client-vips
no shutdown
interface vlan 31
description "Server Side"
ip address 192.168.10.1 255.255.255.0
service-policy input remote_access
no shutdown
interface vlan 1000
description managment
ip address 172.29.91.110 255.255.255.0
service-policy input remote_mgmt_allow_policy
no shutdown
ip route 0.0.0.0 0.0.0.0 172.16.15.1
snmp-server contact "PHQ"
snmp-server community phq group Network-Monitor
snmp-server trap-source vlan 1000
username admin password 5 $1$b2txbc5U$TA74D920oSdd2eOZ4hSFe/ role Admin domain
default-domain
username www password 5 $1$.GuWwQEK$r8Ub4OcE3l190d5GA4kvR. role Admin domain de
fault-domain
username prem password 5 $1$8C7eRKrI$it3UV4URZ26X4S/Bh6OEr0 role Admin domain d
efault-domain
ssh key rsa 1024 force
banner motd # "ro" #
Regards,
Prem

Hi Shiva,
plz guide i'm new with ACE LB, also find my n/w design for connected ace to server. but server accessing very very slow, but when i connect through my old server software LB (with two interface)then accessing very fast. I just replace my old serverLB(with two interface) to ACE4710 and connect the same scenario then why not server accessing smoothly with VIP .Reply soon only I connect ACE's two interface with switch.....
Regards,
Prem

Cat 4006 S3 - Attached hosts Net access very slow prior to reboot

Similar Messages

Maybe you are looking for