Cat 4500-X ISSU Compatibility Matrix

Hello,
I was able to find only this one ISSU compatibility matrix (only in the 6500 section):
http://www.cisco.com/c/en/us/support/switches/catalyst-6500-series-switches/products-release-notes-list.html
I could not find such a matrix for 4500-X.
Maybe somebody can help me?
When I look on the compatibility matrix mentioned above there is also no mention about 15.2 (2)E which should map to IOS XE 03.6.0E according this table:
Source:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_32142-01.html
I would like to know from which release I can perform an ISSU to IOS XE 03.6.0E.
Thanks in advance for any help.
Marek

Hi,
Please check out the following link:
http://docwiki.cisco.com/wiki/Catalyst_4500/4900_series_ISSU_compatibility_matrix
Hope this helps.

Similar Messages

UCCX(9.x) Compatibility Matrix for IE

The UCCX compatibility matrix indicates that the most current TAC supported browser is IE 8. Has anyone run into issues using IE 9 with the CAD client using the integrated browser window. When will IE 9 be supported? UCCX 9.1...UCCX 10.x.
Thanks Joe

"The CAD integrated browser is implemented using the Microsoft WebBrowser control (Shdocvw.dll)..."
Source: CAD Install Guide, Page 23
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/installation/guide/cad85ccxig-cm.pdf
What does that mean? That CAD does not use the iexplore.exe file, and therefore is not bound to the same version as what the user is using.
For example, on my machine, I am running WinXP SP3 and IE 8. However, my Shdocvw.dll is version 6.0.2900.xxxx, which according to this MS document: http://support.microsoft.com/kb/969393 , shows us that is equivelent to IE 6.
What does this mean to us? Well, the supported version of IE is specific to the headings in the compatibility document. E.g., Agent E-Mail, AppAdmin, and CAD-BE. It's not referring to the integrated browser within CAD.
And since the OP's question is with CAD integrated browser, this becomes a non-issue.
However, if you're using CAD-BE or AppAdmin from IE 10, then we're talking unsupported versions. And if it were me, I would stick strictly to the browser version support for CAD-BE, but possibly bend the rules a bit with the AppAdmin one. Actually I use FF v19 which is not supported, and it works fine.
I hope that helps.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Compatibility Matrix for Reader X and Acrobat?

I've scoured adobe.com and can't find a compatibility matrix for Reader X and different versions of Acrobat. Does someone have a link?

Indeed they're not - we haven't got an updated version yet, but the rules are effectively the same as for 9:
Acrobat X can coexist with Adobe Reader 5 through X
Acrobat X cannot safely coexist with another version of Acrobat, nor can Acrobat Pro and Acrobat Standard safely coexist*
Acrobat X and Reader X both contain an option under Preferences to choose which is the default PDF handler.
*On Windows you cannot install Acrobat X without uninstalling all previous copies of Acrobat. On OS X you can force the install to run, but you're destined to see strange effects.

SOA Suite 11.1.1.6.0 compatibility matrix

Hi,
I want to know the compatibility matrix for Oracle SOA suite 11.1.1.6.0. Is it certified on oracle weblogic 12c? or 10.3.5?
Thanks

Hi.
here is certification information for all fusion middleware products http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
best

Compatability Matrix for Oracle 10g

I'm searching for the compatability matrix for Oracle 10g database. Need certified combinations for Operating system (Unix/Windows), Application servers (BEA/IBM) , Web servers, etc.
Can anyone post me the link?
Thanks in advance.

I'm searching for the compatability matrix for Oracle 10g database. Need certified combinations for Operating system (Unix/Windows)Here: http://www.oracle.com/technology/support/metalink/index.html
Application servers (BEA/IBM) , Web servers, etc.There are not cert. matrices for app. servers from other vendors.
You can use whathever application server in combination with Oracle 10g BEA/IBM/JBOSS, etc. Everything you need appropriate client (for example for application in Java - Oracle JDBC connector which is free to download).

Call Manager 10.5 Compatibility Matrix

Hi All
I am unable to find the hardware and software compatibility matrix for Cisco Unified CM 10.5
Can someone please help me with that. Its very urgent.
Thanks in Advance.

http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization
http://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/products-device-support-tables-list.html

Compatibility Matrix Oracle EBS 12.1.3

Hi,
I need information about compatibility matrix of the Oracle EBS 12.1.3:
- Linux RHEL versions supported.
- Browsers supported.
- Java version
Kind regards,
Jackson Franco

Hi Jackson,
You can check the Certifications details on My Oracle Support-
Login to My Oracle Support -> Click on Certifications tab
Enter - Product as "Oracle E-business Suit" and Release "12.1.3"
-Kj

Note: 132904.1 export/import compatibility matrix

Can someone please look at the following note to tell me if I can export / import a 9.2.x database into a new 11.1 database?
Re: "See Note 132904.1 Compatibility Matrix for Export & Import Between Different Oracle Versions"
Thanks. I do not currently have Metalink to look up this note myself.
-Ji Li

+*<Moderator Edit - deleted MOS Doc contents - pl do NOT posts such content - it is a violation of your Support agreement>*+

IMPORT doesn't work per compatability matrix, HELP

I have oracle XE 10.2.0.1 on my machine and the server I am trying to update my database from is 10.1.0.2. IMP and EXP utility are not working. Tried to find an older XE to download and make it same as the server version but could not find one anywhere online.. What are my options to be able to import entire database from older version to newer version ? is there any patch I can apply or something? please help..
FYI, below is a response I got from oracle admin that is managing the server..
Thanks a lot for your help
As per compatibility Matrix,You need to use the export utility of the lower version of source and target database or match database versions.
I should note that you are using a different version of the database on your client. The server is 10.1.0.2 and you are using 10.2.0.1. As to the location, you should be using the same version for testing. You are creating the export dmp file with the export.

If the database server is running 10.1.0.2, there should be a 10.1.0.2 export utility on the server that could be used to generate the dump file. Alternately, you could download the 10.1 Oracle client off of OTN, install that in a separate Oracle Home on your client machine, and generate the export using the 10.1 version of the export utility you just installed.
Justin

Support website down? trying to reach compatibility matrix

hi *,
does anyone of you reach
http://goldstar.stc.com/support/ ?
or is it mainatined at the moment?
i am trying to reach compatibility matrix but cant reach it atm. is it hosted elswhere too? anyone a url that works?
regards chris
Edited by: cbrennsteiner on May 2, 2008 1:07 PM

That works for the most part. I am surprised.
One thing missing, however, is that for support incidents, I can't see see the attached files, since it's linking to http://goldstar.seebeyond.com/support/custom/Attachment/incident_files.asp?
Probably a bug, so I'm not sure I trust it this way.
Edited by: klauern on May 2, 2008 8:27 AM

HP Envy 4500 connection issues

Hi. My Envy 4500 all the sudden will not print, becuase a message on my mac printer icon reads, 'Printer not connected." It HAS been connected....I don't know what happened. The driver appears to be missing from my computer, too. The printer itself, which is wireless, is lit up, so it is on. Ideas? Thank you.

Hello @bogarrity, and thanks for posting on the HP Forums!
I see you're running into connectivity and software issues. I'd be happy to help!
I am posting an HP Support documents below that will show you how to find which version of the Mac operating system you are using:
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the HP ENVY 4500 e-All-in-One Printer Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thanks again for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Bluetooth driver 6.5.1.4500 install issue

I downloaded latest ThinkPad Bluetooth with Enhanced Data Rate Software for Windows 7 Version 6.5.1.4500 but I had to rollback it to the previous version 6.5.1.2700 (X220, Windows 7 x64).
There were several Windows warnings about attempt to install an unsigned kernel driver during the installation. How can Lenovo even publish this ? The package also contains Microsoft .NET 4.0 Framework installation that have installed unnecessary Extended (full) version of the framework during the setup while the Client Profile was already present on the machine. This leads to more security issues because Windows Update have to be performed to get security updates for the Extended (full) part of the Framework
This is already third Lenovo driver update I had to rollback in several last months. Is there any quality assurance department ? I can't remember such issues with Lenovo/IBM ThinkPad products in the past.
Solved!
Go to Solution.

Puppy wrote:
I downloaded latest ThinkPad Bluetooth with Enhanced Data Rate Software for Windows 7 Version 6.5.1.4500 but I had to rollback it to the previous version 6.5.1.2700 (X220, Windows 7 x64).
There were several Windows warnings about attempt to install an unsigned kernel driver during the installation. How can Lenovo even publish this ? The package also contains Microsoft .NET 4.0 Framework installation that have installed unnecessary Extended (full) version of the framework during the setup while the Client Profile was already present on the machine. This leads to more security issues because Windows Update have to be performed to get security updates for the Extended (full) part of the Framework
This is already third Lenovo driver update I had to rollback in several last months. Is there any quality assurance department ? I can't remember such issues with Lenovo/IBM ThinkPad products in the past.
There's no such driver issue in this package. I've rechecked it to be sure. See below.
Likely you have a corrupted or altered download, or your your system is corrupted or infected.
Strongly recommend you scan your system and the download with multiple anti-malware products.
(Good malware products include Microsoft Security Essentials, Malwarebytes, and HitmanPro 3.)
To check the download, here's the SHA-1 hash: 06794d733f19d69a273935fac0ceeb32651b0766
(A good hash tool for Windows is winhasher.)
(Lenovo should be publishing hashes for downloads, but that's another issue.)
Hope that helps,
John
ThinkPad T450s [ i7-5600U | 8GB | 1TB SSD | Full HD IPS | 802.11ac | BT | Webcam | FR | Win8.1Pro64 ]

Interface status on Cisco CAt 4500 switch as source-monitoring

Hi Guys,
I have assigned int gi3/45 on my Cisco 4500 CAT switch as the monitoring port as source and gi3/47 as the destination.
I see this:
GigabitEthernet3/45 is up, line protocol is down (monitoring)
but on the destination port both are up, interface up and line protocol up.
is this natural? I have executed the no shutdown on gi3/45 but it still says down!
is this normal? or there is a problem? i have monitoring on my edge switch CAT 3560 but both are saying UP/UP, shouldn't this be the same since both swithces are running Cisco IOS.
Please respond. I appreciate your input and thanks in advance.
Masood

this interface (g 3/45) is the destination, it says so "monitoring", it normal for the "destination" or "monitoring" port to be up/down coz it's not sending or receiving traffic destined to it, only the mirrored packets from the source port. can you post the "show monitor session #"?

What license neede to VSS in CAT 4500 with SUP7L-E

I have two identical chassis with identical cards and supervisors SUP7L-E. License level is ipbase. Is it possible to deploy VSS in this configuration?
I thought it is, but I've found doc http://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-4500-x-series-switches/at_a_glance_c45-696645.pdf where:
Supported supervisors on Catalyst 4500-E Supervisor Engine 7-E or 7-LE (identical pairs)
Minimum license IP Base or higher (7-E) or special license (7-LE and Catalyst 4500-X)
What means special license?
In this guide https://supportforums.cisco.com/document/124626/virtual-switching-system-vss-configuration-cisco-4500-series-switches we have only:
3) Minimum license : VSS will work with IP BASE or ENTSERVICES license; it doesn't work with LAN BASE .For information about Software Activation Licensing please refer Cisco Catalyst 4500E Supervisor 7-E and 7L-E and Cisco Catalyst 4500-X Series Software Activation Licensing Deployment Guide.

I have the same issue.
We are configuring VSS on Sup7L-E which has been purchased with IP Base licensing, however when we look at the licensing summary, it indicates that a feature of Enterprise Services has been configured .
Currently we have only configured VSS, so this indicates Enterprise Services is required for VSS, however I cannot find any information confirming this.
Switch#sho license sum
Index 0   Feature: entservices
          Period left: 8 weeks 4 days
          License Type: Evaluation
          License State: Active, Not in Use, EULA not accepted
          License Count: Non-Counted
          License Priority: None
Index 1   Feature: ipbase
          Period left: Life time
          License Type: Permanent
          License State: Active, In Use
          License Count: Non-Counted
          License Priority: Medium
Index 2   Feature: lanbase
          Period left: 0 seconds
Index 3   Feature: internal_service
          Period left: 0 seconds

CATS to CO issue via CAT7 - future bookings

We have a number of employees who will book their time in advance. Recently this has caused an issue and when the data transfers, it does not drag through the payroll number into the project reports. You can see it in CATS but not in project reporting. Any ideas on how to fix this?

Thanks for the response. For information we downloaded a fix program from OSS which can now be run anytime, please refer to OSS note 331682

Cat 4500-X ISSU Compatibility Matrix

Similar Messages

Maybe you are looking for