Cat-4506 with Sup II+ won't load new IOS

I'm trying to upgrade the IOS on my 4506 SUP II+ (WS-X4013+) to 12.2(31)SG from 12.2(25)EWA5.
Here are the boot commands and what is in bootflash: and the error during boot:
boot system flash slot0:cat4500-ipbasek9-mz.122-31.SG.bin
boot system flash slot0:cat4000-i9k91s-mz.122-25.EWA5.bin
Configuration register is 0x2102
ROC-SW4506-A#sh bootflash:
-#- ED ----type---- --crc--- -seek-- nlen -length- ---------date/time--------- name
1 .. image 8B6309F2 CACAA0 33 13027872 Dec 22 2005 04:24:19 -08:00 cat4000-i9k91s-mz.122-25.EWA5.bin
2 .. image 3D38E47C 1824E28 33 12026632 Jun 2 2006 11:06:21 -07:00 cat4500-ipbasek9-mz.122-31.SG.bin
******** The system will autoboot now ********
config-register = 0x2102
Autobooting using BOOT variable specified file.....
Current BOOT file is --- slot0:cat4500-ipbasek9-mz.122-31.SG.bin
boot: can not load "slot0:cat4500-ipbasek9-mz.122-31.SG.bin"
The switch will automatically reboot now...
rommon 1 >
It eventually booted to the older IOS. Is this not a good IOS for this switch?

have you tried putting
boot system bootflash:cat4500-ipbasek0-mz.122-31.SG.bin
taking out the slot0:.
This how I have my 4507 and 4503 configured.
http://www.cisco.com/en/US/products/hw/switches/ps663/products_configuration_example09186a00801461ef.shtml

Similar Messages

Deleted mail shows up again, need to force quit, won't load new messages.

I've been having email issues after upgrading to OSX 10.8.2 Everything is fine with first opened and then after a bit starts to act funky. I will delete messages and they will pop back up, it won't load new emails unless I shut it down and restart. It also won't close unless I force quit. This has been happening for a while. I am using GoDaddy for my email server and the Mac Mail App. I mainly use one email (the godaddy email) and have many, many "mailboxes/folders" in that account. I wasn't sure if the amount of "mailboxes/folders" was why I am having the issues, or the best way to go about saving them was. I'd like to be able to save the actual "mailbox/folders" as they are organized by project, but noticed the archive function doesn't let you put in folders. I included a screen shot of how my innox is set up in case that helps. Thank you for help, let me know if there's anything else I should include.

I've been having email issues after upgrading to OSX 10.8.2 Everything is fine with first opened and then after a bit starts to act funky. I will delete messages and they will pop back up, it won't load new emails unless I shut it down and restart. It also won't close unless I force quit. This has been happening for a while. I am using GoDaddy for my email server and the Mac Mail App. I mainly use one email (the godaddy email) and have many, many "mailboxes/folders" in that account. I wasn't sure if the amount of "mailboxes/folders" was why I am having the issues, or the best way to go about saving them was. I'd like to be able to save the actual "mailbox/folders" as they are organized by project, but noticed the archive function doesn't let you put in folders. I included a screen shot of how my innox is set up in case that helps. Thank you for help, let me know if there's anything else I should include.

Won't load new app

Hi
I am a Revel member and have all my pictures and club logo, colors and so on, tomorrow we today NOW 1 hour ago I was supposed to send those logo and rest of club colors to people on the advertising to work and be finished so we have the posters ready tomorrow but not?? What is happening. Why can't I get into my app so I can send it?? It won't load new adobe revel app. Is this a joke or something that is for children den please inform us.
Best regards Mario

Thank you for the answer, yeas I know that but I was out on the field working whit our Coaches and didn't have a computer or wifi on the Soccer field. But thank you for your concern and quick answer.
Mvh Mario
1 jul 2014 kl. 07:24 skrev Pattie F <[email protected]>:
Won't load new app
created by Pattie F in Revel - View the full discussion
There is an issue with upgrading to Revel 2.3.2 on iOS. We are aware of this issue and are working with Apple to resolve it as quickly as possible. We sincerely apologize for the inconvenience this is causing you. In the mean time, you can still access your photos on adoberevel.com from a browser and from our mac, win8, and android apps.
Pattie
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6511962#6511962
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Revel by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How can I change the version of iTunes store back to UK, as I've just loaded new IOS version and the phone is loading the US iTunes store. Thanks.

How can I change the version of iTunes store back to UK, as I've just loaded new IOS version and the phone is loading the US iTunes store. Thanks.

http://support.apple.com/kb/ht1311

Cant down load new iOS 5.1 says can't connect to network

Cant down load new iOS 5.1 says can't connect to network

Check out this link to see if it helps - http://www.apple.com/support/ipad/assistant/wifi/

Home Sharing won't load on iOS devices - works fine on AppleTV

I've been struggling with Home Sharing and cannot understand why it simply won't work. I have a relatively large library (25,000 songs/300movies/1000 tv shows). I'm running all Apple devices, all with the latest OS/software versions. AEBS is my router.
Home Sharing has always worked flawlessly from iTunes on my Mac to AppleTV.
When I load up the Videos App on and any of my several iPhones and iPads in the house, my Shared Library always appears...
...however, if I tap to load it...the spinning circle appears and that's where it ends. It will spin endless for several minutes until it Fails or I stop it.
What could be the problem here? I've tried all the basic troubleshooting of turning HS on/off, in iTunes and the iOS devices, restarted every device plenty of times...Nothing.
It used to work intemittently with iOS 6, but not at all on iOS 7.

Contrary to the marketing, Music or Video using Home Sharing simply does not work on the iPad. I have spent hours on the phone with Apple Care. There is no solution. If you really need to watch video, buy an Apple TV and a small monitor or some other setup. The problem is not with Home Sharing, which works fine between my computers. Neither is it with the Wi-Fi, which I use with the Remote app to load and play the same library that Music stalls on. The problem is with the Music and Video apps, which can only load shared libraries intermittently.

Can't send email; Safari won't load new pages

Mountain Lion has broken mail (smtp) and Safari is so bad, I've had to install Chrome. Is anyone else getting the same kind of bad experience with 10.8? I have spoken to my ISP and my settings are ok according to them (O2), but I can't send emails from the Mail app. As for Safari, even half of Apple's own pages won't load. I'll be reverting to Lion from a cloned disc if I can't get this fixed.

Exactly the same is happening to me and I'm with O2,all the settings are correct as well.I spoke to one of the tech people at o2 and they said they'd received about 30 calls about the same thing,thank God I've got Gmail and the iPhone works perfectly.This is rather serious,please Apple do something about it urgently

Numbers documents show as thumbnails but won't load on ios 5

I upgraded to ios 5 and now my Numbers docs won't load. They appear only as thumbnails with a loading bar but they won't actually load on my iPad or iPhone. I don't use iWork on the Mac. I've reset iCloud several times but my docs just won't load.

I upgraded to ios 5 and now my Numbers docs won't load. They appear only as thumbnails with a loading bar but they won't actually load on my iPad or iPhone. I don't use iWork on the Mac. I've reset iCloud several times but my docs just won't load.

Safari won't load new web sites after one or two are viewed

I open Safari, view my homepage, go to another website, then when I try to go to another site after that, Safari won't load it. The curser is still a black arrow, the new address in the address bar has the blue loading stripe on it that only fills the address 1/4 of the way and no further. I have to quit Safari and then reopen it to go to another site. Also, it won't quit. I click quit and get the spinning ball for a long time so I have to Force Quit.
Today I updated Safari to 3.2.3 I was running 3.2.1. I am on Mac OS 10.4.11. I thought maybe the update would fix this problem. But it didn't.
Any help for this pretty computer illiterate user would be most appreciated!!

Hey Hawaiian Starman! Aloha!
Thanks so much for trying to help. I looked at Joe's problem and your reply to go to OnyX. I clicked on the link. Am I supposed to download something, or just work off that site? I clicked on the icon that said maintenance. It opened a window that had the following boxes and the Xs are the ones that were preselected.
Maintenance: (X) Repair Permissions
Execute Maintenance Scripts
Cleaning: (X) System Cache
(X) Application Cache
(X) Fonts Cache
(X) Logs and CrashReporter
(X) Temporary items
Rebuild:
(X) Launch Services
dlyd's shared cache
Display of folders content
Spotlight Index
Mail-mailboxes Index
The Xs are the defaults I guess. But I wasn't able to deselect any and choose another?
Hey Hawaiian Starman, I think Apple should have you on their payroll! You are sweet to help!
Many thanks for your help and patience.
Cat

My Skype won't load new messages

Whenever I open Skype, my group conversations take a very long time to load new messages or they do not load new messages at all. This is particularly annoying when I am trying to communicate with people at work or family members. I am using the latest Skype update and would really like a solution to my problem.

It is ridiculous. Takes 10 to 15 tries to get it to load. The chat msgs is a big issue.

IPod touch won't load new songs

My iPod touch won't add any more files, although there is plenty of space. It gets stuck on "preparing to update." What gives?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

What happens with IMESSAGE? since i got new ios 5.1 it doesnt work fine in my iphone 4 and change the sending o receiving from others to mail o cell phone constantly...

since i got the new ios 5.1 on my i4 imessage doesnt work with other iphones, for example, my boyfriend send me and imessage and i get it as it email address and when i try to send him one, it goes as text!!, i dont understand.... this has been happened from both of us actualizated iphone to ios 5.1 ... and it has been changed constantly....

And yes, the Samsung has no issues on it's end. It sends, receives all regular sms texts from any phones that aren't using iMessage. Sorry, I didn't see your reply.
To update, I also just phoned Apple this morning, there's not much they could do at all. My personal opinion is that the number that was recycled (when I got it changed just very recently for the Android) must have somehow previously been linked to an pre-existing Apple ID. There was nothing they could do. They had me do numerous things that unfortunately had no successful results.
They even had me unregister my product from the Apple website, again, no success.
He did, however, say that there is an update going through beta testing at the moment that should, more than likely, have a patch in it for this particularily known issue since it's been an issue for awhile. So within a couple of months when it's released, I'm hoping this will fix it. I'm keeping my fingers crossed until then.
Turning iMessage off is the temporary solution that works for me. So I'm happy enough for that. Anyone else who would want to text her, would have to do the same.

Dll created in visual studion with /CLR option won't load by cvi

i have created a small dll, which holds 1 exported function.
The dll is created in VisualStudio2008, sp1
With option /CLR, targetting .NET framework 2.0
The export is like below:
extern "C" int __declspec(dllexport) __stdcall testHelloWorld(void)
System::Console::WriteLine("Hello world") ;
System::Console::WriteLine("Hit the any key") ;
System::Console::ReadKey() ;
return 0 ;
The following code should run this dll, from cvi 9.0.1 (375)
extern int __stdcall testHelloWorld(void) ;
typedef int (__stdcall * HelloWorldPtr) (void) ;
void main(void)
{ HMODULE hLib = 0 ;
HelloWorldPtr doit ;
SetStdioPort (HOST_SYSTEM_STDIO);
SetStdioWindowVisibility (1);
hLib = LoadLibrary("CppTestClr.DLL") ;
(FARPROC)doit = GetProcAddress(hLib,"_testHelloWorld@0");
doit() ;
// testHelloWorld();
When i run the dll with run time linkage (as show above) there is no error, all ok.
When i try to run the dll with load time linkage (line 'testHelloWordld' linked-in ),
cvi shows an error 'A non-debuggable thread caused a general protection fault at address...'.
This message is shown before the main function is reached.
Visual studio has no problem in running the code from a win32 console application.
Labview runs the code without problems.
Why won't cvi load the dll ??
tnx.

nickb wrote:
A solution will be available, but due to the complexity of this issue LabWindows/CVI 2010 will not work for you out of the box - a configuration will have to be made. I've made a note to come back and update this post when LabWindows/CVI 2010 releases with instructions concerning this configuration.
NickB
National Instruments
I'm an SSP member, so i'll receive the new version automatically.
Maybe it's a good idea to also create an entry in the release notes of version 2010.
These are my first attempts in using c++ dll's as a .NET wrapper for cvi.
But it looks very promising. Comparing to the .NET wrappers in cvi it's much more convenient (native way of working).
I would like to be able to use this as a generic way of working.

Lightdm with unity-greeter won't load

I've been attempting to install lightdm and the unity greeter, and I'm a bit stuck here.
I've installed the lightdm-ubuntu and lightdm-unity-greeter packages from the AUR. It starts up normally, but there is no gear available to choose session type, and logging in causes the DM to just restart and go back to the logon page.
I was able to use lightdm and lightdm-gtk-greeter successfully. Also, running startx from another tty successfully starts my session (in my case, xmonad). I've attached my configuration files and log files, in case anyone can make heads or tails of them.
File dump follows!
Here's my etc/lightdm/lightdm.conf:
# General configuration
# start-default-seat = True to always start one seat if none are defined in the configuration
# greeter-user = User to run greeter as
# minimum-display-number = Minimum display number to use for X servers
# minimum-vt = First VT to run displays on
# lock-memory = True to prevent memory from being paged to disk
# user-authority-in-system-dir = True if session authority should be in the system location
# guest-account-script = Script to be run to setup guest account
# log-directory = Directory to log information to
# run-directory = Directory to put running state in
# cache-directory = Directory to cache to
# xsessions-directory = Directory to find X sessions
# remote-sessions-directory = Directory to find remote sessions
# xgreeters-directory = Directory to find X greeters
[LightDM]
#start-default-seat=true
#greeter-user=lightdm
#minimum-display-number=0
#minimum-vt=7
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
#log-directory=/var/log/lightdm
#run-directory=/var/run/lightdm
#cache-directory=/var/cache/lightdm
xsessions-directory=/usr/share/xsessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#xgreeters-directory=/usr/share/xgreeters
# Seat defaults
# type = Seat type (xlocal, xremote)
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
# xserver-layout = Layout to pass to X server
# xserver-config = Config file to pass to X server
# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
# xdmcp-port = XDMCP UDP/IP port to communicate on
# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
# greeter-session = Session to load for greeter
# greeter-hide-users = True to hide the user list
# greeter-allow-guest = True if the greeter should show a guest login option
# greeter-show-manual-login = True if the greeter should offer a manual login option
# greeter-show-remote-login = True if the greeter should offer a remote login option
# user-session = Session to load for users
# allow-guest = True if guest login is allowed
# guest-session = Session to load for guests (overrides user-session)
# session-wrapper = Wrapper script to run session with
# display-setup-script = Script to run when starting a greeter session (runs as root)
# greeter-setup-script = Script to run when starting a greeter (runs as root)
# session-setup-script = Script to run when starting a user session (runs as root)
# session-cleanup-script = Script to run when quitting a user session (runs as root)
# autologin-guest = True to log in as guest by default
# autologin-user = User to log in with by default (overrides autologin-guest)
# autologin-user-timeout = Number of seconds to wait before loading default user
# autologin-session = Session to load for automatic login (overrides user-session)
# exit-on-failure = True if the daemon should exit if this seat fails
[SeatDefaults]
type=xlocal
xserver-command=X
#xserver-layout=
#xserver-config=
#xserver-allow-tcp=false
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
#greeter-session=lightdm-unity-greeter
#greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
user-session=XMonad
#allow-guest=true
#guest-session=UNIMPLEMENTED
#session-wrapper=lightdm-session
#display-setup-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
#autologin-user=
#autologin-user-timeout=0
#autologin-session=UNIMPLEMENTED
#exit-on-failure=false
# Seat configuration
# Each seat must start with "Seat:".
# Uses settings from [SeatDefaults], any of these can be overriden by setting them in this section.
#[Seat:0]
# XDMCP Server configuration
# enabled = True if XDMCP connections should be allowed
# port = UDP/IP port to listen for connections on
# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn. Alternatively
# it can be a word and the first 7 characters are used as the key.
greeter-session=unity-greeter
[XDMCPServer]
#enabled=false
#port=177
#key=
# VNC Server configuration
# enabled = True if VNC connections should be allowed
# port = TCP/IP port to listen for connections on
[VNCServer]
#enabled=false
#port=5900
#width=1024
#height=768
#depth=8
My contents of /usr/share/xsessions:
$ ls /usr/share/xsessions
xmonad.desktop
/usr/share/xsessions/xmonad.desktop
[Desktop Entry]
Encoding=UTF-8
Name=XMonad
Comment=Lightweight tiling window manager
Exec=xmonad
Icon=xmonad.png
Type=XSession
And the log files, after boot and one log on attempt:
/var/log/lightdm/lightdm.log
[+0.03s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.03s] DEBUG: Starting Light Display Manager 1.4.0, UID=0 PID=355
[+0.03s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf
[+0.03s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.27s] DEBUG: Registered seat module xlocal
[+0.27s] DEBUG: Registered seat module xremote
[+0.27s] DEBUG: Adding default seat
[+0.27s] DEBUG: Starting seat
[+0.27s] DEBUG: Starting new display for greeter
[+0.27s] DEBUG: Starting local X display
[+0.31s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory)
[+0.31s] DEBUG: Using VT 7
[+0.31s] DEBUG: Activating VT 7
[+0.36s] DEBUG: Logging to /var/log/lightdm/x-0.log
[+0.43s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0
[+0.43s] DEBUG: Launching X Server
[+0.43s] DEBUG: Launching process 368: /usr/bin/X :0 -core -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.44s] DEBUG: Waiting for ready signal from X server :0
[+0.44s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.44s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+2.46s] DEBUG: Got signal 10 from process 368
[+2.46s] DEBUG: Got signal from X server :0
[+2.46s] DEBUG: Connecting to XServer :0
[+2.51s] DEBUG: Starting greeter
[+2.51s] DEBUG: Started session 387 with service 'lightdm-greeter', username 'lightdm'
[+3.33s] DEBUG: Session 387 authentication complete with return value 0: Success
[+3.33s] DEBUG: Greeter authorized
[+3.33s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
[+3.38s] DEBUG: Session 387 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter
[+4.53s] DEBUG: Greeter connected version=1.4.0
[+4.53s] DEBUG: Greeter connected, display is ready
[+4.53s] DEBUG: New display ready, switching to it
[+4.53s] DEBUG: Activating VT 7
[+5.34s] DEBUG: Greeter start authentication for jabenze
[+5.34s] DEBUG: Started session 424 with service 'lightdm', username 'jabenze'
[+5.36s] DEBUG: Greeter start authentication for jabenze
[+5.36s] DEBUG: Session 424: Sending SIGTERM
[+5.36s] DEBUG: Started session 426 with service 'lightdm', username 'jabenze'
[+5.36s] DEBUG: Session 424 terminated with signal 15
[+5.36s] DEBUG: Session 424 failed during authentication
[+5.39s] DEBUG: Session 426 got 1 message(s) from PAM
[+5.39s] DEBUG: Prompt greeter with 1 message(s)
[+13.53s] DEBUG: Continue authentication
[+13.55s] DEBUG: Session 426 authentication complete with return value 0: Success
[+13.55s] DEBUG: Authenticate result for user jabenze: Success
[+13.56s] DEBUG: User jabenze authorized
[+13.56s] DEBUG: Greeter requests session ubuntu
[+13.56s] DEBUG: Using session ubuntu
[+13.56s] DEBUG: Stopping greeter
[+13.56s] DEBUG: Session 387: Sending SIGTERM
[+13.59s] DEBUG: Greeter closed communication channel
[+13.59s] DEBUG: Session 387 exited with return value 0
[+13.59s] DEBUG: Greeter quit
[+13.60s] DEBUG: Dropping privileges to uid 1000
[+13.60s] DEBUG: Calling setresgid
[+13.60s] DEBUG: Calling setresuid
[+13.62s] DEBUG: Restoring privileges
[+13.62s] DEBUG: Calling setresuid
[+13.62s] DEBUG: Calling setresgid
[+13.63s] DEBUG: Dropping privileges to uid 1000
[+13.63s] DEBUG: Calling setresgid
[+13.63s] DEBUG: Calling setresuid
[+13.63s] DEBUG: Writing /home/jabenze/.dmrc
[+13.70s] DEBUG: Restoring privileges
[+13.70s] DEBUG: Calling setresuid
[+13.70s] DEBUG: Calling setresgid
[+13.73s] DEBUG: Failed to load session file /usr/share/xsessions/ubuntu.desktop: No such file or directory
[+13.73s] DEBUG: Failed to start greeter
[+13.73s] DEBUG: Stopping display
[+13.73s] DEBUG: Session 426: Sending SIGTERM
[+13.73s] DEBUG: Session 426 terminated with signal 15
[+13.73s] DEBUG: User session quit
[+13.73s] DEBUG: Sending signal 15 to process 368
[+14.28s] DEBUG: Process 368 exited with return value 0
[+14.28s] DEBUG: X server stopped
[+14.28s] DEBUG: Removing X server authority /var/run/lightdm/root/:0
[+14.28s] DEBUG: Releasing VT 7
[+14.28s] DEBUG: Display server stopped
[+14.28s] DEBUG: Display stopped
[+14.28s] DEBUG: Active display stopped, switching to greeter
[+14.28s] DEBUG: Switching to greeter
[+14.28s] DEBUG: Starting new display for greeter
[+14.28s] DEBUG: Starting local X display
[+14.28s] DEBUG: Using VT 7
[+14.28s] DEBUG: Logging to /var/log/lightdm/x-0.log
[+14.28s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0
[+14.28s] DEBUG: Launching X Server
[+14.28s] DEBUG: Launching process 463: /usr/bin/X :0 -core -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+14.28s] DEBUG: Waiting for ready signal from X server :0
[+14.88s] DEBUG: Got signal 10 from process 463
[+14.88s] DEBUG: Got signal from X server :0
[+14.88s] DEBUG: Connecting to XServer :0
[+14.88s] DEBUG: Starting greeter
[+14.88s] DEBUG: Started session 468 with service 'lightdm-greeter', username 'lightdm'
[+14.90s] DEBUG: Session 468 authentication complete with return value 0: Success
[+14.90s] DEBUG: Greeter authorized
[+14.90s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
[+14.90s] DEBUG: Session 468 running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/unity-greeter
[+15.01s] DEBUG: Greeter connected version=1.4.0
[+15.01s] DEBUG: Greeter connected, display is ready
[+15.01s] DEBUG: New display ready, switching to it
[+15.01s] DEBUG: Activating VT 7
[+15.01s] DEBUG: Stopping greeter display being switched from
[+15.10s] DEBUG: Greeter start authentication for jabenze
[+15.10s] DEBUG: Started session 500 with service 'lightdm', username 'jabenze'
[+15.11s] DEBUG: Session 500 got 1 message(s) from PAM
[+15.11s] DEBUG: Prompt greeter with 1 message(s)
[+15.15s] DEBUG: Greeter start authentication for jabenze
[+15.15s] DEBUG: Session 500: Sending SIGTERM
[+15.15s] DEBUG: Started session 502 with service 'lightdm', username 'jabenze'
[+15.15s] DEBUG: Session 500 terminated with signal 15
[+15.15s] DEBUG: Session 500 failed during authentication
[+15.15s] DEBUG: Session 502 got 1 message(s) from PAM
[+15.15s] DEBUG: Prompt greeter with 1 message(s)
/var/log/lightdm/x-0-greeter.log:
** (process:468): WARNING **: Failed to open CK session: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ConsoleKit was not provided by any .service files
Activating service name='org.a11y.atspi.Registry'
[+0.00s] DEBUG: unity-greeter.vala:438: Starting unity-greeter 12.10.4 UID=999 LANG=(null)
[+0.00s] DEBUG: unity-greeter.vala:441: Setting cursor
Successfully activated service 'org.a11y.atspi.Registry'
[+0.00s] DEBUG: unity-greeter.vala:455: Loading command line options
[+0.00s] DEBUG: unity-greeter.vala:483: Setting GTK+ settings
** (at-spi2-registryd:490): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
** (at-spi2-registryd:490): WARNING **: Unable to register client with session manager
[+0.04s] DEBUG: unity-greeter.vala:506: Creating Unity Greeter
[+0.04s] DEBUG: unity-greeter.vala:55: Creating background surface
[+0.04s] DEBUG: Connecting to display manager...
[+0.04s] DEBUG: Wrote 17 bytes to daemon
[+0.04s] DEBUG: Read 8 bytes from daemon
[+0.04s] DEBUG: Read 149 bytes from daemon
[+0.04s] DEBUG: Connected version=1.4.0 default-session=XMonad show-manual-login=false hide-users=false has-guest-account=true show-remote-login=true
[+0.06s] DEBUG: menubar.vala:342: LANG=(null) LANGUAGE=(null)
[+0.06s] WARNING: File '/usr/lib/indicators3/7/libsession.so' does not exist.
[+0.06s] WARNING: File '/usr/lib/indicators3/7/libdatetime.so' does not exist.
[+0.06s] WARNING: File '/usr/lib/indicators3/7/libpower.so' does not exist.
[+0.06s] WARNING: File '/usr/lib/indicators3/7/libsoundmenu.so' does not exist.
[+0.06s] WARNING: File '/usr/lib/indicators3/7/libapplication.so' does not exist.
[+0.06s] DEBUG: menubar.vala:360: LANG=(null) LANGUAGE=(null)
[+0.07s] DEBUG: Loading users from org.freedesktop.Accounts
[+0.07s] DEBUG: Loading user /org/freedesktop/Accounts/User1000
[+0.08s] DEBUG: Loading sessions from org.freedesktop.DisplayManager
[+0.08s] DEBUG: user-list.vala:950: Adding/updating user jabenze ()
[+0.08s] WARNING: Could not get accounts property XKeyboardLayouts
[+0.08s] WARNING: Could not get accounts property XHasMessages
[+0.08s] CRITICAL: g_variant_get_type: assertion `value != NULL' failed
[+0.08s] CRITICAL: g_variant_type_is_subtype_of: assertion `g_variant_type_check (type)' failed
[+0.08s] CRITICAL: g_variant_get_type_string: assertion `value != NULL' failed
[+0.08s] WARNING: Unexpected accounts property type for XHasMessages: (null)
[+0.08s] CRITICAL: g_variant_unref: assertion `value != NULL' failed
[+0.08s] WARNING: Could not get accounts property XKeyboardLayouts
[+0.08s] WARNING: Could not get accounts property XHasMessages
[+0.08s] CRITICAL: g_variant_get_type: assertion `value != NULL' failed
[+0.08s] CRITICAL: g_variant_type_is_subtype_of: assertion `g_variant_type_check (type)' failed
[+0.08s] CRITICAL: g_variant_get_type_string: assertion `value != NULL' failed
[+0.08s] WARNING: Unexpected accounts property type for XHasMessages: (null)
[+0.08s] CRITICAL: g_variant_unref: assertion `value != NULL' failed
[+0.08s] WARNING: Could not get accounts property XKeyboardLayouts
[+0.08s] WARNING: Could not get accounts property XHasMessages
[+0.08s] CRITICAL: g_variant_get_type: assertion `value != NULL' failed
[+0.08s] CRITICAL: g_variant_type_is_subtype_of: assertion `g_variant_type_check (type)' failed
[+0.08s] CRITICAL: g_variant_get_type_string: assertion `value != NULL' failed
[+0.08s] WARNING: Unexpected accounts property type for XHasMessages: (null)
[+0.08s] CRITICAL: g_variant_unref: assertion `value != NULL' failed
[+0.08s] DEBUG: user-list.vala:932: Adding guest account entry
[+0.13s] DEBUG: Loaded session /usr/share/xsessions/xmonad.desktop (XMonad, Lightweight tiling window manager)
[+0.13s] WARNING: Failed to open sessions directory: Error opening directory '/usr/share/lightdm/remote-sessions': No such file or directory
[+0.13s] DEBUG: Starting authentication for user jabenze...
[+0.13s] DEBUG: Wrote 23 bytes to daemon
[+0.18s] DEBUG: Starting authentication for user jabenze...
[+0.18s] DEBUG: Wrote 23 bytes to daemon
[+0.18s] DEBUG: main-window.vala:176: Screen is 3840x1080 pixels
[+0.18s] DEBUG: main-window.vala:182: Monitor 0 is 1920x1080 pixels at 0,0
[+0.18s] DEBUG: main-window.vala:182: Monitor 1 is 1920x1080 pixels at 1920,0
[+0.18s] DEBUG: unity-greeter.vala:509: Showing greeter
[+0.18s] DEBUG: unity-greeter.vala:198: Showing main window
[+0.21s] DEBUG: background.vala:470: Regenerating backgrounds
[+0.21s] DEBUG: background.vala:68: Making background /usr/share/backgrounds/warty-final-ubuntu.png at 1920x1080
[+0.21s] WARNING: unity-greeter.vala:523: Error starting nm-applet: Failed to execute child process "nm-applet" (No such file or directory)
[+0.21s] DEBUG: unity-greeter.vala:527: Starting main loop
[+0.21s] DEBUG: Read 8 bytes from daemon
[+0.21s] DEBUG: Read 37 bytes from daemon
[+0.21s] DEBUG: Ignoring prompt authentication with invalid sequence number 1
[+0.21s] DEBUG: settings-daemon.vala:97: Could not start gnome-settings-daemon over DBus: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SettingsDaemon was not provided by any .service files
[+0.27s] DEBUG: Setting keyboard layout to 'us'
[+0.29s] DEBUG: Read 8 bytes from daemon
[+0.29s] DEBUG: Read 37 bytes from daemon
[+0.29s] DEBUG: Prompt user with 1 message(s)
[+0.32s] DEBUG: unity-greeter.vala:181: starting system-ready sound
[+0.38s] DEBUG: background.vala:117: Render of background /usr/share/backgrounds/warty-final-ubuntu.png complete
/var/log/lightdm/x-0.log
X.Org X Server 1.13.1
Release Date: 2012-12-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.7.0-1-ARCH x86_64
Current Operating System: Linux frankie 3.6.10-1-ARCH #1 SMP PREEMPT Tue Dec 11 09:40:17 CET 2012 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=51606072-17ca-431e-a2bf-ba739d1cfeb1 ro quiet
Build Date: 16 December 2012 04:45:14PM
Current version of pixman: 0.28.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 26 13:36:33 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA

I am also stuck on this. I get pretty much the exact same result. Until I figure it out I'll be doing the quick startx.

Iod Touch Problem with January Update - Won't load!! Tried Everything/

Dear all, Just thought I'd try my luck here for some help on the January upgrade. I'm experiencing all of the problems that everyone else are having but the usual fixes don't work. So I've upgraded my Touch to 1.1.3 and Itunes to 7.6.
The Download button wasnt visible so I reset my Touch. I was then able to purchase the touch and it downloaded. Then nothing. I had oricinally Synced with a different computer and had manual Syncronisation enabled. So, I reset my Touch again, set it to auto Sync and rebooted, re-synced, everything. Hours of trying different variations of restoring, syncing, etc. When I put my Ipod back in the cradle, I go to the purchase upgrade screen. If I hit "No Thanks, I get an error. If I try to purchase again, I get the message that it's already purchased. I've checked my download history and the upgrade is listed there.
I'm a windows/Intel guy and was starting to realise how cool Apple stuff was but well, now I think I'm starting to come back around.
Any suggestions ? Thanks to all and good luck!

Hi EC, thanks for the suggestion. Unfortunately, that doesn't work either. I've tried on two diferent computers too. Itunes 7.6 install, reset Touch, reinstall software, sync and no luck. I've double checked that my computer is authorised an that the January upgrade is in my purchase history. Even reset my touch via iTunes and via the Settings panel on the Ipod.
The only thing left that I can think of is to create a new account and re-purchase the upgrade. However, Im still not totally at ease with paying for an upgrade 2 weeks after the purchase, and Im not ready to pay for it twice.
Apple are you guys really this bad at running a business ? I will certainly with-hold purchasing any new product of yours in the future.
Cheers
RS

Cat-4506 with Sup II+ won't load new IOS

Similar Messages

Maybe you are looking for