CAT!!! I kept my player for more than 7 hrs for the initial cha

Hi Cat,
I have kept my zen v plus for more than 7 hrs for the initial charge, still the Play icon not appeared on the display, its showing still the battery charging flash icon.
TELL ME WHAT TO DO?
Thanks & Regds,
2CREATIVE

Depends on how strong your wifi connection is.
you can try a reset hold down the home/sleep button together until you see the apple logo and then release.

Similar Messages

It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, w

It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!

Hi Vmanfromusa!
It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I just updated to iOS 6 and now whenever I'm in an app for more than 5 minutes the app will close and I can't get back in it for 10 minutes. Can anyone help? Please?

Okay, so I just updated to the newest iOS 6 version on my iPod. And now I can't be in an app for more than 5 minutes without the app closing and I can't get back into the app for at least 10 minutes. Somebody, anybody please help me! This is getting really annoying!!! Please please please!

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Lock user ID which are kept idle for more than 30 mints.

Dear All,
My requirement is as follows.I need one batch job to lock all user IDs in producrtion system if the user Id is kept idle for more than 30 mints.
Can you pls let me know how I can do it and under which tables the user Ids are stored and is there any standard program that I can use to fullfill my requirement.
Thanks to all of you for your support.
Rgds,
Babu

Dear,
First suggestion - contact your BASIS team.
Secondly, please check the below:
Logging off the inactive users is not set up by default. Setting up the feature of logging off the users improves the security as unattended terminals do not stay active indefinitely.
To activate automatic logging off, do the following:
Go to Profile Maintenance by choosing Tools --> CCMS --> Configuration --> Profile Maintenance or the transaction RZ11.
Maintain the parameter rdisp/gui_auto_logout. Enter the required number of seconds of inactivity before the user is logged off automatically.
To deactivate automatic logoff, delete the parameter from the profile(s) or set the value '0'.
Regards,
Syed Hussain.

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off. Please if anyone has any idea that I do, let me know. thanks

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off.
Please if anyone has any idea that I do, let me know.
thanks

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: You have to hold 2 buttons down together.

Help me to search on calendar for more than one year

I desparately need to be able to search on calendar for more than one year., which was taken away on the new operating system. I have kept personal memories of my husband on there in the notes sections on days when we did things. ( I have also kept all kinds of personal notes, like doctor records or conversations, in the notes of events/dates.) it is a huge loss for me not to be able to search my calendar for more than one year. Is there any way I can do this?

Jens,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

If you have no electricity for more than 8 hrs you have no phone with Fios

No one told me that when I gave up my copper line for FIOs that when the electricity goes off for more than eight hours I would have no phone service. Usually, if the electricity went off I would just plug in one of the old phones with a cord and still have access to telephone service. Not so with FIOs. Cell phone service in this area isn't reliable either, especially if there are too many people trying to call out at the same time. It is not a good product for someone who may need EMS service in a secluded area. If I had known this, I would have kept my DSL, FIOs is not any faster when others are on line using it.

Maybe you were not around for the installation of your FIOS when the installer put the battery backup in your garage. Note there is an emergency button on the battery backup that you can push to get an additional 5 hours of phone calls. In my case the welcome kit that I was given also provided directions on how to enable the extra 5 hours of phone support.
Also I've DSL speeds are typically in the 1-7 Mbit speed while my with a 384/768 upload. My Fios gives me consistent 20 megs down and 5 up which is way faster then DSL.
Good luck!

Zen Nano Plus wont play for more than 5 seconds at a ti

I recently bought a new Creative Zen Nano Plus and thought I was getting a good reliable product. It synced in WMP like it should but when I unplugged it from my computer and tried to listen to the songs it will boot up and start playing a song but then shut off 3 seconds later. I formatted it and updated the firmware and drivers on the player and my computer but it still wont play for more than a few seconds at a time. I tried changing the battery and leaving it plugged in but neither of the above worked. I would appreciate some help. Thanks.

Same issue with me - only mine won't even power on now...
I am waiting on reply from customer support...

Jumpy streaming once paused for more than 10 secs...

Hello everyone,
I have a player set up to stream live tv channels. It works fine except when paused for more than 10 secs or so, it continues to stream but very jumpy, as if we press on advance/rewind button.
If you have any idea or have encountered the same problem, please share.
Your input is very appreciated.
Regards,
Niusaul

Hello,
I am using FMS...
I was able to fix it the problem.
Thx ;-)

System.log shows (every 3 minutes): no valid selfIDs for more than 2 min

Besides having to live with A LOT of USB 2.0 problems since the upgrade from 10.4.6 to 10.4.7 (like may other people reported) I also noticed a lot of errormessages in /var/log/system.log, that have to do with the Apple 6 port Firewire/USB2.0 PCI card.
When starting up the system a line gets written that says like:
Aug 3 18:08:44 localhost kernel[0]: FireWire (OHCI) VendorID 10b9 ID 5253 PCI now active, GUID 0030bd05 18000d15; max speed s400.
Then, when the machine is properly running the log continues:
Aug 3 18:11:34 server kernel[0]: FireWire (OHCI) VendorID 10b9 ID 5253 PCI: no valid selfIDs for more than 2 minutes after bus reset.
Aug 3 18:14:46 server kernel[0]: FireWire (OHCI) VendorID 10b9 ID 5253 PCI: no valid selfIDs for more than 2 minutes after bus reset.
Aug 3 18:17:57 server kernel[0]: FireWire (OHCI) VendorID 10b9 ID 5253 PCI: no valid selfIDs for more than 2 minutes after bus reset.
etc. etc. etc.
That is about 1 line every 3 minutes.
I only have 3 USB2.0 drives connected to my 6 port card, no Firewire devices!
After trying all suggestions found on the Apple-site I simply kept getting these errors until: I plugged in a 'Target-Disk-Mode' PowerBook over a Firewire cable. Then the errors stopped showing up and the interface appears to be happy. I can even remove the PowerBook from the Firewire port now without getting any errors!

So, a workaround is to (temporarily if you wish) connect a Firewire-disk to the card. That will stop the errormessages from showing up.
The solution has to come from Apple. Empty Firewire ports should be allowed to 'not send any valid selfIDs' ever...

Creating SQL-Loader script for more than one table at a time

Hi,
I am using OMWB 2.0.2.0.0 with Oracle 8.1.7 and Sybase 11.9.
It looks like I can create SQL-Loader scripts for all the tables
or for one table at a time. If I want to create SQL-Loader
scripts for 5-6 tables, I have to either create script for all
the tables and then delete the unwanted tables or create the
scripts for one table at a time and then merge them.
Is there a simple way to create migration scripts for more than
one but not all tables at a time?
Thanks,
Prashant Rane

No there is no multi-select for creating SQL-Loader scripts.
You can either create them separately or create them all and
then discard the one you do not need.

Perform VENDOR EVALUATION for MORE THAN ONE VENDORS at a time

Hello all,
Please guide for any process where i can perform Vendor Evaluation for MORE THAN ONE vendors AT A TIME.
At my location there are around thousand vendors, which are to be evaluated, and difficult to perform the evaluation process one-by-one.
(ME61/ME62/ME63)
Detailed replies with various possibilities would be highly appreciated.
Thanks & Regards,
Joy Ghosh

The vendor evaluation for some thousand vendors at the same time has already been in SAP long before they developed LSMW. The purpose of LSMW is to load data from a legacy system, of course you can (mis-)use it for a lot other things.
But you should not always use LSMW if you are to lazy to go thru the SAP standard menu to find a transaction like ME6G
There you define a job that runs RM06LBAT report.
You first have to define a selection variant for this report. this can be done in SE38 by entering the report name, select variant, clicking display, then entering a name for the variant and clicking Create.

Setting Equalizer for more than one song at a time

Is there any way to set the equalizer setting for more than one song at a time. For example, if I have a classical music album with 10 songs, can I set the equalizer for "classical" for all 10 songs at once? It's a pain to have to do it for each one individually. I tried using the "shift" key, but to no avail.
Thanks,
Joe The Author

highlight all the songs you want then right click and go to get info. in the options tab at the top there is an equalizer preset option.

Master_detail for more than one record at a time

Hi,
How can i display master_detail records for more than one records at a time, for example, i have two tables A and B , A has username and role and B has username and profile. here i wanted to display 10 users at a time on my 6i form with username, role and profile.
i have created a master-detail relation ship with these tables when i'm executing F8 on blcok A , it displays 10 records on BlockA but, only one at a time on block B, how can i display all corresponding records on block B at a time.
Thanks for your help.Bcj

Thanks Roberts, that was realy informative due to some doubts i would like to confirm my requirements , i have two blocks A and B and each master record has only one detail record. but i wanted to display at least 10 master_detail relationships(records) on the form at a time, i would like to know is it possible to do without creating any table or view for example,
data in table A,
username role
AAA R1
BBB R2
CCC R3
data in table B,
username profile
AAA P1
BBB P2
CCC P3
i wanted to display it on form like below,
username role profile
AAA R1 P1
BBB R2 P2
CCC R3 P3
Also would like to know that how can i select data from dba_users, any restriction is there on forms 6i, i can select it on sqlplus.
Thanks Again, Bcj

Quota deduction when EE has been inactive for more than 180 days / Advance quota days when employee does not have enough balance

Dear experts,
We have two requirements regarding to the "Anual leave" quota.
1. Quota reduction when employee is inactive for more than 180 days
2. Advance quota days when employeee does not have enough balance
We have in place an "Anual Leave" quota related to a calendar year period, that gets generated dialy in time evaluation. This quota gets the employee entitlement from a set of rules that stored the corresponding balance in a period time type, that is the one that we defined in the customizing. This is working fine. The problems start when we try to incorporate the other two requirements.
Regarding the first requirement, if the employee has been inactive for more than 180 days in a calendar year due to unpaid leave, we need to start quota reduction as follow,
First, we need to clear the balance that was calculated above in the schema.
Then, we need to calculate one leave day for every 20 days worked till the end of the year, considering as such, everyday the employee is expected to work, except days on which the employee has been absent on unpaid leave.
For the second requirement we created a manual quota call "Advance Anual Leave". So, if the employee, wishes to take 20 working days holiday, but in his/her Anual Leave quota has only 10 days available, we have to create an "Advance Anual Leave" quota manualy for 10 days. When the quota for next year gets generated, we need to deduct these advanced 10 days from it. This deduction should stop the year after.
The problem we are finding with these two requirements is that, due to the Anual Leave quota gets generated dialy, we can't get the balance right.
Thanks in advance!
Kind regards,
Alex

Hello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely,

CAT!!! I kept my player for more than 7 hrs for the initial cha

Similar Messages

Maybe you are looking for