CAT2 - Actual hours exceeds Planned hours.
Hi All,
I am maintaining seperate data entry profile for Time Administrator. When i posted time entry for a subcontractor using the time administrator profile, it throws error message saying "Actual hour exceed Planned hours". I had checked the planned hours in CJ20N for the personnel no. it has surplus hours.
Then why it showing error message.
Regards,
Shadeesh.G
What is CJ20N ?
We see the message "Actual hour exceed Planned hours" as a warning when the number of hours entered in CAT2 exceeds the Planned Hours in the employee's Daily Work Schedule.
Are you getting a "Warning" or an "Error" ?
Warnings and Errors are part of Time Management configuration. For example, if you use IT2005 to record Overtime, you can select "NoMessage/Warning/Error" through the Daily Work Schedule (V_T550A).
Similar Messages
-
Order wise-Planned hours VS Actual Hours report
Hi,
Is there any report which shows me the Orderwise Planned Hours VS Actual hours.
Regards
SBSB,
Have a look at TCode IW37N (Order/operation overview) and display the Work and Actual Work fields.
You can probably use IW37 too..
PeteA -
Total Planned and Total Actual Hours for service order
Hi,
Is there is any table in which I can directly find the Total Planned and Total Actual Hours for service order.Pl suggest.
Regards
SBSorry SB, didn't read your post properly... I thought it was costs you were after...
AFVV holds the total actual work at operation level.
PeteA -
Actual hours impact on Variance analysis
Hi:
When we talk about actual activity hours then in how many ways it can impact variance calculation. We have aggregated our work centers and hence define an aggregated machine hour for it. Is it ok? E.g
A work center X constitute of 3 machine aggregated
A
B
C
Machine hours has been entered in for X after combining the hours required by A,B,C . Please guide.
BrHi:
May i please know the advantages of entering actual hours at process order confirmation time. At client side they have a practice of entering the same hours as shown planned in CORR. They do not enter standard hours. Moreover may i please know the impact planned hours correct entry in operation. Please guide me.
Br -
How get the actual hours worked by the employee in SAP.
Hello Experts,
How to get the actual hours worked by employee in a month.( Any infotypes or tables or fm)
I have report to get planned hours of the employee
Thanks and Regards
ReddyHello expert,
I am a technical guy, I dont have functional knowledge and HR functional support is not available at the moment..
I have requriement to develop a report to caluclate the actual night shift hours worked by the employee...
I have report : RPTEDT00 where in I have actual hours worked day and night..
But I am not able to find how do in my custom program from the program reference...So I want to know is there any way where in I see this data in tables or infotypes
Thanks and Regards
Reddy -
Actual Hours difference between IW38 and IW47
Hello all.
I have a unique situation that I am trying to handle. Am trying to see if someone here knows what is happening.
I have a Work Order. In the "Costs" tab and in the "Quantities" Sub tab
Planned hours of Word=36 hrs
Actual Hours=35 hours.
But when I run IW47 to see all the confirmations to this order, it only shows 3 confirmations totalling 14 Hours.
While in the order the actual hours is 36. I am not sure what happened to the remaining 21 Hours. Can someone please tell me what else could be going on here.Hello,
I was also facing the same issue for actual work hours difference in iw37 and iw48 .
But following sap note has solved the problem.
146929
Missing or incorrect actual values in activity
Cheers!!!!
Regards,
Piyush -
Hi,
How the production order actual hours is calculated? In which tcode can i check the actual hours took to complete a production order?
In my scenario, the order wise confirmation is done (CO15) not the operationwiese.
Kindly help.
TIA,
SabithaHi,
In milestone confirmations, planned activities are always posted on the basis of the confirmed quantity. If you have entered activities manually during a milestone operation, planned activities are also confirmed when the preceding operations are automatically confirmed. The exception to this is the setup times, which are always confirmed fully, independently of the entered quantity
You enter a confirmation of 7 pieces for milestone operation 30, which has a planned yield of 10 pieces. Operation 20 is confirmed automatically. The planned machine time for operation 20 is 40 minutes, therefore a machine time of 28 minutes is confirmed
For display of conformations please refer to this link
http://help.sap.com/saphelp_47x200/HELPDATA/EN/b1/c04dd1439a11d189410000e829fbbd/frameset.htm -
How Actual hours for a Particular Activity is getting Calculated in CJ20N?
Hi Experts,
i have a small issue in PS module.In Cj20n after creation of project, under the activity the actual hours are differing from those of CATS hours.How or from where the actual hours are getting populated.The value is getting stored in AFVGD-ISMNW.
Plz help............hi
have you transfering the actual time after entering and approval to the PS. by the t code CAT5 - Transfer -
ML81N- actual hours show up as 1 ACT on PM order
Hello all,
When confirming hours via service entry sheet the actual hours that were posted disappear in the actual posting the PM order.
In ML81N i confirm 3 line items,
line 1: 2H on 15.02.2010
line 1: 6H on 16.02.2010
line 1: 4H on 18.02.2010
All these confirmations are displayed on the PM order as 1 ACT. The thing is, when using ML81N and cofirming towards a WBS element, the Hours DO show up when checking the postings on the WBS element...and not everything is combined into 1 ACT.
I suspect this has to do with the settings in the service master or maybe the customizing regarding completion confirmations or maybe even with the setup of the PO. But so far i have not been able to discover the cause of this issue.
I hope somebody can help me.
Thanks in advance for your help
Kind regards,
PeterMore information:
I have tested several scenario's and i have determined thatit has to do with the PO created. I have found 1 PO that gives me the desired result (the good PO). I tried to copy the PO exactly, but i can not get it to work:
I believe i made the same settings
Account assignment: U
Item category: D
no usage of service master
Good PO:
Booked on WBS element directly: hours show in CJI3 on actual postings
Booked on PM order: hours show in actual postings of PM order
My own PO:
booked on WBS element directly: hours do not show in CJI3. booking is 1ACT
booked on PM order: hours do not show in PM order. Booked is 1 ACT.
The service ordered is different between them. so different vendor, service, material group. but i can not imagine that that's the reason.
I hope this information will help you finding the solution
regards,
Peter -
PM module- After upgrade ECCC6, Actual hours confirm displaying in PM order
Hi PM Gurus,
After Upgrade from 4.6C to ECC6.
I have ceated a PM order & done the time confirmation by IW41.
In Order - Opeartion Tab page , does not show actual hour confirmed for a particular operation.
But we can see Actual work hour in other way" Extrasu2014Order Documentsu2014Completion Confirmations"
Please provide if there is any OSS note is available for this problem or any other solution.
thanks
with regards
LokeshHi,
The intention is that this actual work field is only made available (on operation overview) for historical orders. For normal orders, confirmations are made and these figures are accumulated to give a 'actual work' value. This can be seen on the operation detail screen. It is never possible to enter data directly in this field.
It is possible this actual work field was visable on some releases at particular patch levels but this was an error. The table control settings allow access to this field but the program logic will always overwrite any user settings with ''invisable' setting for this field.
A modification would be required to make it visable.
-Paul -
Hi All
Can anybody tell me that IO Actual V/S Plan Commitment S_ALR_87013000 Business area wise report, Search by BA is possible.
Thnaks
PavanHi
Given report is standard SAP define report using the CO RP/RW report and the details are
Table CCSS
Library 6O1
Report group 6L03
Using the TCODE : GRR2 - open the report and in the menu >Edit>General Data selection - u will get the pop up screen for element definition in that select the Business area in right side and send it to left side
Before doing as above - you must have "variable" which defines the Business area - create the same using the TC:GS11 create like how the period is created
VVR -
Actual costs and Planned Costs
HI Friends
I want to know the Main Tables from which i can get the <b>Actual costs and Planned Costs</b> for the given Cost element or object number
I tried with table COEP and i got actual costs up to all cost elements in the given controlling area and in given cost center , but for some cost elements, this tables does not have any entries...
So is there any other way to get these Actual costs and
from where i can find the Planned Costs
Reagrds RkHi
I already checked these tables but i didn't get the exact data
for actual costs i checked COEP but some costs are missing there
and i could n't find the field BENKZ in coep table
I am comparing these values with the standard transaction <b>S_ALR_87013611 </b>
but not getting exact details in my program
can you please help me in this regard..
Does anybody worked on this transaction <b>S_ALR_87013611 </b>, then please explain me the logic how it is getting the actual and planned costs
Regards Rk
Message was edited by:
Rk Pasupuleti -
Unable to copy Actual cost to Planned cost via CJ9CS
I am trying to copy actual cost to planned cost for secondary cost elements via CJ9CS; currently there is a variance.
How can I match my planned cost with the actual cost.
We have already applied OSS note 304119 and we are on ver. 4.7.
Has any one used enhancement COOMKPT4 and function exit EXIT_SAPMKPT4_010 Or is there any other way to copy the actual cost to the planned cost?
Thanks
AmitHi Sudhir,
Thanks for the quick reply.
CJEN won't work for us, we are trying to find a way to fix CJ9CS.
When we do CJ9CS the price is getting copied over from the price defined in KP26 instead of the Actual price.
We have to find a way for the system to disregard the plan price while copying and just take the actual price.
Any clues how we can do that?
Regards
Amit -
Copy actual data to plan version
Dears,
I have a requirement wherein business has maintained plan data for balance sheet GLs in GP12N for version 1 for 6 months. Now the requirement is to copy actual data of first 6 months to next 6 months in version 2 (forecast) and start comparing actual/plan/forecast. I tried copying in FAGLGP52N, but it allows only from plan version to another plan version.
Please suggest if there is a way to copy actual data to plan version.
I have another requirement to display plan version data of cost element (PL) which we maintain in KP06/7KE1 in F.01.
Thanks,
LokeshTry to use Plan version (000) where the Actual values are posted in this version.
Cheers,
Sarhan. -
What is actual process in plan maintenance module?
Hi Expert,
I want to know What is actual process in plan maintenance module? can u pls give me briefly description.
Regards,
Ram RathodeRam,
I assume you mean "Plant Maintenance" module.
"Actual Process" Is also a bit misleading. There are many distinct processes within the PM module, just as in any SAP module.
Start with online help.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/66/158661547611d182cc0000e829fbfe/frameset.htm
which is a high level description. If you want more, just coninue reading the sub-pages.
Best Regards,
DB49
Maybe you are looking for
-
How do I create a shared library from iPhoto when the file is too large to burn on DVD?
I need to remove some photos (70 GB) to relieve a full hard drive. I have exported and burned .jpg images on DVDs, but that is only useful as a worst case backup. What I would like to have is a separate iPhoto Library for each calendar year of pho
-
I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received
-
Hello Experts, Could anybody tell me what is "*@#@@[SAP]" if we r putting it in the starting of the line then it is protecting the entre code. If it so how make the code unprotected.... Do plz help to unhide the code if once it is hide with yo
-
Billing Output Access Sequence
We have the following requirement for output determination and I was wondering if anyone has configured the following, bearing in mind that some required fields do not exist in KOMB 1 - Sales Org/ Customer Hierarchy 2 - Sales Org/ Sales Doc Type/ Sal
-
HOW TO VIEW & EDIT/ADD DATA TO ICAL FROM WINDOWS XP
I am new to macs & have been using windows xp at my office. I want to know whether there is a way to edit/add my ical calendars & to-do lists from windows xp. I tried using mozilla calendar but it is pathethic. ical data is not compatible with outloo