CAT2- Customer Funtion button on inital screen and Detail entry

Hi all,
I have enhanced the project for CAT2 tcode by CATS0011 enhancement in Dev system and moved to Qualifty system.
In this case I see Customer Function button 3, 4 and 5 on details entry Screen and Customer Function 6 and 7 on the initial screen (CAT2)
Again I revert enhancement CATS0011 and now I cannto see the Customer Function 3 to 7 in Dev system, but can seein Quality syste.
Already try with multiple transports from Dev to Quality, but doesn't work in Quality but works in Dev system.
Please let me know how it can be done.
Regards,
Prasad

Hello Prasad,
Please check your transport is done correctly, Sometimes objects have not been transported correctly, So objects would be missing in the target system. Also you can check correct version is generated in the target system.
Best Regards,
Deepak..

Similar Messages

After resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!

after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!

Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device

Mt iPhone shows unread messages that aren't there! I have held down the power and home buttons until blank screen and apple icon appear only to find it is cleared, but within minutes the unread messages reappear! Please help

Mt iPhone shows unread messages that aren't there! I have held down the power and home buttons until blank screen and apple icon appear only to find it is cleared, but within minutes the unread messages reappear! Please help

Have you restored the iphone through itunes?
You say the unread messages aren't there but then they appear?

Hi i had my ipad mini on the windowsill and the touch screen is not working or the button on the screen and the screen is coming away is there anything i can do

hi i had my ipad mini on the windowsill and the touch screen is not working or the button on the screen and the screen is coming away is there anything i can do will apple take it back

pvonk wrote:
Apple does not replace or take back devices that are damaged.
Depends on the damage. The battery came loose in my iPhone. When Apple opened the phone to redo the glue they discovered the speakers were also loose. Apple replaced the phone.
If the glue was properly bonded or had some other flaw Apple will replace the device if the device is still under warranty.

LG Optimus Zone. is there anyway to take the carama button off the screen and use one of the physical buttons on the phone to take pictures??

Duplicate discussion - please see:
LG Optimus Zone. is there anyway to take the carama button off the screen and use one of the physical buttons on the pho…
Message was edited by: Admin Moderator

Hello jr1984
Awesome question. Unfortunately there isn't a way to reassign the buttons. There may be a 3rd party application for the camera that would have a different option.
JoeL_VZW
Follow us on Twitter @VZWSupport

How do i reset my apple security questions when i cant find there is no reset button on my screen and i tried itunes and iclould

how do i reset my apple security questions when i cant find there is no reset button on my screen and i tried itunes and iclould

See Kappy's previous discussion.
HT5312 How to recover security...: Apple Support Communities

Custom field in Basic data screen of invoice entry screen

hello,
I want to add custom fields in basic data screen of Invoice entry in SRM 5.0.
As invoice Entry screen is divided into three parts:
1. Basic data Screen
2. Header data screen
3. Item data screen
Now according to OSS Note number 672960 we are able to add Custom fields in the header as well as item data screen of invoice entry without any difficulty.
but our requirement is to add custom fields in the basic data screen.
Is there way available to add custom fields in the basic data screen.
Thanks
Sarabjeet

hi
check this spro path
Financial Accounting (New) --> Travel Management --> Business Add-Ins and User Exits in Travel Management --> Entry --> Screen Modifications: Adjustment of "User Data" Screen

Radio button in selection screen and push button

Hi experts,
I want to give radio button in selection screen side by side.
how we can do this on slection screen.
secondly i want to resize push button on selection screen.
please provide me the exact solution.
thanks
babbal

Hi babbal,
For Your Requriment yo can go to tcode se51 & then give ur program name & give screen number as 1000 because 1000 is default screen for all the programs and in se51 Press Layout button & then you can make changes to the Selection screen according to your requriment
Hope it will be Helpfull.......!!
Thanks & Regards,
Bhushan

Anyone cant use home button on home screen and pull-down menu after using camera?

After snaping some pics i am unable to roll down menu and also home button to scroll to main screen on home screen.

Oh sorry i wrote it not understandably...
After i snaped some pics with camera accessed thru locked screen i was not able to use home button and also drag notification center from top. It did not worked. Turn on and Turn off was needed to enable home button on main screen (it not worked only on main screen. It should take you to first screen of your home)... I have experienced it twice after using camera opened from locked screen. I can not reproduce it... First time there was also disappeared top panel with watches and battery life (screenshots)

How to create one Oprations button (Create Button Or CreateInsert Button )for all master And Detail block?

hi
I have master And Detail with 4 level ,I want to have on operations button for all block in data control .
(similar to Oracle form toolbar)
how to do it ?

Well, if you tell us your jdev version and what exactly you try to do, without just telling us 'as in forms' we might be able to help.
Most of us don't know how it's done in forms. So be specific when you describe your use case.
Timo

I want to use a customized photoshop button with my composition and have rollover effect

I'm trying to place a photoshop button into a blank composition widget trigger. When I cut a paste the image into the trigger it looses its fuctionality and no longer switches colors during rollover. It works fine in the lightbox composition, but the problem with lightbox composition is that it does not have rollover options to display the target only click. How do I get around this problem. I want to have my own customized button with the composition effect within muse cc.

You should check the design layout and states defined for the trigger , if the state is defined properly then it should show the rollover state, but the target container corresponding to the trigger is on the page then it would show you the active state not the rollover state.
Thanks,
Sanjit

On my ipad when i touch the icloud button it changes screen and at top it say account not verified. it keeps looking and looking. why? how can i fix this?

when i turn on my ipad and go to settings then to icloud the ipad says account not verified. what does this mean? how can i fix it? it keeps looking and looking yet does find my account.

Welcome to the Apple Community.
Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.
Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you.

MS CRM 2015 Adding Custom RIbbon button in dashboard and Changing Colors

Hi,
I am Looking for customization in MS Dynamics CRM 2015 and want to Add Custom Ribbon button in dashboard and Changing Colors of that ribbon using customization.xml i am new to crm 2015 and only know how to import export solutions.
Regards
Irfan

Hello Irfan,
For adding a custom button please refer this blog
https://community.dynamics.com/crm/b/aeonnexuscrm/archive/2014/10/21/ms-crm-2013-adding-custom-ribbon-button-in-dashboard.aspx
And for changing colors in Chart
https://crmchartguy.wordpress.com/2012/08/23/palette-custom-colors-in-charts/
Hope this helps!
Regards, Abhishek Bakshi If you find this post helpful then please Vote as Helpful and Mark As Answer. Check my blog on https://mydynamicscrmblog.wordpress.com/

Missing 'Add Custom Label' button again

A mate and I both have an iphone 4, same firmware i.e. 6.1.3 and as far as i can see all settings are the same. However when entering the same new contact on my phone I have at the bottom of the 'select phone type label' screen an add a 'Custom Label' button, the list of phone types labels on mine are 'Mobile, iPhone, Home, Work, Main, Home Fax, Work Fax, Pager, Other' On my mates his list is 'Home, work, home fax, work fax, pager, assistant, car, company main, radio' and the 'Add Custom Label' button is missing.
Other contact entries on his phone have the same list as mine and they include the 'Add Custom Label' button.
They are both only synchronised with icloud Can anyone help please?

I have found the answer - the 'Contacts' in my mates iPhone was set to 'Exchange' set it to 'iCloud' both iPhones now have the 'Add Custom Label' option

How to clear grey loading screen and animated gif (Dynamic Action with "Show Processing" on submit)

APEX V4.2.3
DB 11.2
I have a classic report on page 1. I have a region button called "Export" (defined by a submit dynamic action with "show processing=Yes") that submits the page and then via a branch directs me to page 2 which has a slightly different version of the report on page 1 (i.e. no breaks) which I want to capture as a CSV export. Therefore I've set the report template on page 2 to " Export:CSV".
Now when I click on the page 1 export button the grey screen and loading gif appears indicating that the report is executing and then as expected, page 2 doesn't appear but instead the standard open/save window's dialog box appears asking to open or save the generated CSV file. All good..but the grey loading screen remains. How do I clear this loading screen and get back to the context of page 1 ?
thanks in advance
PaulP

Hi PPlatt,
We would love to help but you left out one crucial part of the puzzle: namely how does your CSV report get exported. With the way it is setup (a redirect to another page), I'm going to assume you do that because you have some PL/SQL on that page that prints the CSV.
Now there are two questions that are crucial here:
- How do we stop the icon from bugging us on the screen
- How do we communicate with the browser that it should no longer display the loading icon
The first question is rather easy, two simply lines of codes can do that:
$('#apex_wait_popup').hide();
$('#apex_wait_overlay').hide();
But when do we use this code? Quite simple when the document is downloaded. When is it downloaded? At the end of the PL/SQL code that prints the document to the browser.
What you could do is at the end of that code give an application item a certain value. For example :AI_PRINTED := 'Y';
Then all you need to do is let the browser ask for the value. You could do this by using JavaScript to continuously fire AJAX to the server using a JS timing event:
http://www.w3schools.com/js/js_timing.asp
Better would be a Server send event, but since you left out another crucial piece of information: your browser, I will not go deeper into this.
Start this timing event when someone asks for the document, and end it as soon as the process returns that :AI_PRINTED equals 'Y'.
Despite the lack of information, I hope I have given, or at least inspired you to get to the solution.
Regards,
Joni

CAT2- Customer Funtion button on inital screen and Detail entry

Similar Messages

Maybe you are looking for