CAT2- Fields not displaying

Hi,
I have configured CATS -Regular.
created -Data entry profile
configured CAC2, and also checked in su3 and maintained user parameters and Hr Master data etc.
when i tried to enter the details in Cat2, Total, Employee No and Employee name is not showing.
Maintained input for TOTAL, CATSFIELDS-ENAME, CATSFIELDS-PERNR.
tried various posting given in the scn.sap etc. still not able to get these fileds in CAT2.
Your help is required.
Regards,
Suaman SV

Hi Suaman,
Please let me know if you have maintained the below config for your data entry profile.
When I hide these 2 fields I am not able to see the name and PERNR for the TM.
So please check again if you have the changes to the correct data entry profile.
Regards
Rakesh KM

Similar Messages

  • Master-detail: detail field not displayed after changed by master field

    I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
    In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
    How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

    Wouter,
    I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
    So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
    Steven Davelaar,
    JHeadstart team

  • KOMK Fields not displaying values in sales order.

    Hi all,
    I have created an additional tab for VA01,02 and 03. I have added fields from VBAP table and KOMK structure.
    Now fields added from KOMK structure are displaying empty fields(no value). The fields areVAT REG NO (KOMK-stceg) and Tax Code (KONP-MWSK1).
    i have added fields with same name, so i have not coded anything. Do i need to code something for these fields?
    Please suggest the possible solution.
    Thanks in advance for your suggestions.
    Regards,
    NarsiReddy cheruku.

    Hi Edgar Soares,
    Thanks for your reply,
    Yes you are right, i am using BADI_SLS_ITEM_SCR_CUS.
    now i have added KNA1-STCEG to screen and in PBO module i coded as follows.
    (In top include i declared Tables kna1 and Tables VBAK.)
    data vat type kna1-stceg.
    data wa type kna1.
    SELECT SINGLE * from kna1 INTO wa.
    vat = wa-stceg.
    But it is not displaying Vat reg num on screen only displaying empty field.
    Please suggest where i went wrong.
    Thanks & Regards,
    NarsiReddy Cheruku.

  • Custom fields not display in SRM5.5 Basic Data Frame

    Hello Everybody,
          I am working on SRM5.5 Server which i have to add two custom fields in Basic Data Frame..
         No field is display in basic data frame After I added those fields in INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF.
        I added these fields by help of 672960 OSS notes..
       Add also when i execute the program BBP_DYNPROS_GENERATE where I entered the program name as SAPLBBP_PDH_CUF and execute but non of them is working fine..
      Is there anything else do i need to display custom fields in basic data frame??
    I have one more question..
      When you logon through SAPGUI and goto BBPSC01 t.code where you see lots of fields in basic data frame such as unloading point and all.. But those all fields does not display when you logon through WebURL..
      I checked is there any BAdi such CUF or Screenvarient or some Badi has been actived but non of the Badi has been implemented..
      To display all the fields which are display in GUI Mode also should display in URL..
      To bring this functionality , What do i need to do?
      I appreciate if you answer these questions..
    Thanks,
    John.

    Hi Disha,
    We are trying to add custom fields to the Shopping Cart Header. We are using SRM 5.0. We added the fields to the structures "INCL_EEW_PD_HEADER_CSF_SC" & "INCL_EEW_PD_HEADER_CSF".  We are able to see the custom fields. But the issue is , we are able to see the custom fields in the Shopping Cart one step shop scenario. Whereas when we run the wizard which is a 3 step scenario, we are not able to see the custom fields.
    Technically speaking, the custom fields are visible for the ITS BBPSC01 & BBPSC03 , where as these custom fields are not visible for the ITS BBPSC02.
    Please let me know, if we need to append the fields to some other structure to be able to see them in the Shopping cart wizard also.
    I will be gald to provide any kind of info.
    Thanks in advance...

  • Maintenance View - Fields not Displaying

    Hi experts,
    I created a Maintenance View for a table. But when i go and see in the Maintenance View Overview, the integer field-columns in the table are not displayed in the view.
    can u ppl suggest me why this happens? whether maintenance view will not support integer fields ? And how to over come this problem.
    with regards ,
    James...
    Valuable answers will be rewarded...

    the problem might be you used two screens while creating table maintaince.
    so use one screen in table maintaince then you will get everything.
    even now you will get all fields ,just double click on one column,it will give detailed,there you can see the all the fields.
    Thanks
    Seshu

  • "File Path and Name" field not displaying correctly

    Post Author: DaveWoo
    CA Forum: General
    Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- Dave

    This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
    Ludek

  • "Define query parameters" popup in Dataset properties - Refersh field, not displayed for Sps in SSDT 2010 (Works fine in BIDS)

    When we upgraded our SSRs projects to 2012, we are facing an issue in Data tools environment.
    When we click REFRESH FIELDS button in Dataset properties, With query type as SP (For all our sps), the "Define query parameters"  popup is not displayed. 
    When we checked the SQL Profiler for queries executed at back end , NULL values are used for parameters.
    But when we Used the QUERY DESIGNER button, and clicked execute for sp, the popup comes.
    For User defined Functions, the Popup comes correctly.
    In BIDS, still we can open the RDLs and do the operations correctly
    Please advice

    Dear Wendy Fu
    My Scenario is different.
    In Query Designer, Every thing is fine (Parameter Popup is coming, and fields are populated under data set)
    But what we need to do is
    1, Select Query Type As SP
    2, Select the required SP
    3, Click Refresh Button
    4, A "Define
    query parameters" window popsup
    5, Provide values and click Ok
    6, Fields will be populated under the dataset
    The issue we face is that, we are not getting the  Define query parameters popup,
    Hence NULL values are passed to execute the sp, to retrieve the fields set.
    The Work around we are using now is editing the sp, and use
    set @Parameter = Value
    for each parameters in sp, and then we get the fields populated under dataset, when we click refresh.
    The issue exists in both  MSDT for
    Visual studio 2010 &  MSDT for  Visual studio 2012.
    But every thing is fine in BIDS with VS 2008 Shell for the same RDL

  • Field not displayed completely in the Query

    Hi friends,
    I have a Field in a query. The info object for this field is a characteristic and has length 40. Data is getting extracted completely in DSO. But Query is not displaying complete field.
    For example in DSO the field has "Catering/Food, Non-Product (Overhd Cost)" but the query is displaying "Catering/Food, Non-P"
    Some inputs please!
    Thanks & Regards,
    Virinchi.

    Hi,
    Goto BW system, Maintain that info object screen, in Business explorer tab > bex description> select as long text and then reactivate.
    Same thing to be done in query designer.
    Then see ur report in analyser, and then lemme know,
    thanks

  • Mail merge fields not displaying properly - Dollar signs and percentages

    Hi folks,
    I don't know much about mail merging, so I have a question.  I have most things working on my merge, but need help with a couple of minor items (I hope).  I have an Excel 2010 spreadsheet that we use for merging to a Word 2010 document. 
    It has various fields such as name, address, city, etc.  It also has a field for a dollar amount formatted to two decimal places and showing the $ sign in Excel (ex. $67,000.00), but when it gets merged into the Word document, it displays as 67000. 
    It doesn't pull the $ nor the decimal point and cents.
    I also have the same thing with a percentage (Ex. 6.00%), displays in the Word document as .006. 
    I think I have everything else working, but can't figure out how to format these items in the Word document to display properly.  Any advice?
    Mike

    If you insert the fields
    { MERGEFIELD Total_NB_Premium_away_from_Plan }
    and
    { MERGEFIELD Total_Premium_of_Team_Sales_Target }
    directly in your mail merge main document, outside an IF field, not nested in an { = } field, with no formatting switches, what results do you see?
    Word will only apply a numeric format to things that it decides are numeric (broadly speaking, that includes numeric and currency amounts that it can recognise). It will leave anything else unformatted. So if you have something that looks a bit like a number
    like "$-164,209.00", the chances are that Word will leave it exactly as it is.
    When Word does not recognise something as being a number or a valid numeric expression, it will generally display one error or another when you try to put it in an { = } field. So, e.g. 
    { =$-164,209.00 } would give you the syntax error that you are seeing. (Assuming "$" is set up as the currency symbol in your COntrol Panel's regional options. If the regional currency symbol was £, you would see a different syntax error.)
    The problem in this case probably originates in something that has happened in Excel. Normally, things that are numeric/currency in Excel come through as things that Word treats as numeric. But if for example, someone has entered a number formatted as text
    in a column that has texts rather than numbers above it, Word may receive something that it does not think is numeric. You may have to fix your sheet before Word will "see" the numbers correctly.
    When you have got to the point where WOrd sees the numbers correctly, you should be able to use
    { MERGEFIELD
    Total_NB_Premium_away_from_Plan} \#$,0.00 }
    (and the negative numbering formats if you want) without nesting the { MERGEFIELD } inside an { = }
    Peter Jamieson

  • Some report fields not displaying when users view reports in a Citrix

    Hi All, got a weird one.
    We have an app developed in MS Visual Studio 2007 that utilizes .NET crystal reports. Our users access these reports through citrix. Most of teh time, most people can view these reports correctly. SOME of the time, however, certain fields will disappear. The report still runs the same (grouping, ordering, etc) but key information is missing.
    After re deploying the reports and / or clearing the user's roaming profile then everything is good for a while, so I know it has something to do with a temp or cached version of the report. is there a way to set .net crystal reports to NOT cache AKA create new every time?
    Any assistance would be greatly appreciated!
    JOhn.

    Hi John,
    Yes and Yes.... 14 years...
    Multiple Commands and multiple data sources without being linked can cause problems if you also use SQL Expressions. If you try to add more than one data source in the Designer you'll get a pop up warning about server side grouping and SQLExpressions can not be used.
    But I don't think this would be the cause. May be a result of the option logically internal to CR but I don't think the data source would be the issue, again you said the info is there just not displayed.
    Do they have access to run your app without going through Citrix? Possibly running your app using Remote Desktop. Could rule out if it's a CR issue. I think this may be a GDIPlus problem, it is the dll that renders the page and could be dropping the objects. I know MS has been patching it lately to plug security holes....
    One option, if they can, is to use [Modules |https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip], get then to run it when the reports are working and then again when they are not and see if there are any dll differences...
    I have heard of a few other cases with Citrix and I believe it was narrowed down to being a Citrix problem and that was as far as we could take it....
    Process Monitor may help but if it's random it's a lot of info to go through to determine the cause.
    Maybe logging a case with Citrix might help also....
    Thanks again
    Don

  • Master page fields not displaying data from XML file

    Hi,
    For some reason if I a add a field on the master page, when previewed it does not display the xml data assigned to the field.
    I have a work around, but it looks messy and would prefer to resolve the problem correctly.
    My work around is to create another field with the same name in the "Design view" layout, and change the presence to invisible. I don't even have to link it to the xml data, simply select Global as the default binding.
    Any ideas what I have done wrong, I assume it's a simple setting somewhere but I have no idea what it is.
    Thanks
    Russell

    If there, try removing the $. at the beginning of the binding that gets puts there if you select the item from the pop up list.
    I have a text field that is read only and bound without the $. that was working fine for displaying data. I have a drop down that had the $. and was not saving. I removed the $. and now it is getting saved to the XML. However, it does not display on the next render of the form.

  • Appended Comments Fields Not displaying in Open with Access SharePoint 2013

    i have a Issues List which is actively been used as a helpdesk ticketing system amongst one of the groups within my organization. Within that list we have Comments Field( Multiple Line Of text) and its set to Append changes to existing text.
    One of the Office Admins uses the "Open with Access" Feature of that list to open the list in the access view and do some reporting. We are able to open the list in the Access, but Comments Field is not displaying the appended comments in that
    Comments field we talked about above.
    Is there something, i need to tunr on to activate that or is it not supported?
    Your insights would be helpful

    Hi Octopus,
    I understand that you want to display the Appended changes to the multiple line of text field when using "Open with Access".
    Per my knowledge, the “Append change to existing text” feature is the feature of the item view.
    It calls the “Comments” data from the versions and display them on the item view. It is just a “view".
    The original data of the versions does not locate in the list items but in the version files.
    The contents of the “Comments” column are the latest update contents of this column exist in this list.
    So, the contents in the versions will not be displayed in Access when using Open with Access, even if using Export to Excel.
    It is by design.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • New ALV Grid Field not Displaying?

    I revised a report to have a new column. So I added this new field to the code.
    I see the field and the value when I call
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    Bbut the field I added does not display.
    Thank-you.

    Hi,
    Please ensure that you added the related logic in the FIELD CATALOG of the ALV.
    Regards,
    Nirmal

  • New field not displaying in ALV

    Hi all,
    I have worked with ALV before, but currently I'm facing the problem of adding a new field to the ALV but it was not display on the screen. I have checked the fieldcatalog table and internal table right before the call of GRID-> SET_TABLE_FOR_FIRST_DISPLAY. All seems to be fine at this moment. Just that the new field was not displayed on the screen. Any idea?

    Hello Mil
    If you are using the old-fashioned ALV you will find several push-buttons for changing the ALV layout.
    If you are using OO-based ALV then you will have a single push-button in the ALV toolbar with dropdown menu to select the specific function.
    In any case, choose function "Change layout...". Usually you will get a popup with two lists of fields:
    - on the left side you see the currently displayed fields in the ALV list
    - on the right side you see fields that can additionally displayed
    For sure you will find your missing field there.
    Regards
      Uwe

  • Some fields not displayed on transaction VA03.

    Hi ,
    Some fields are not displayed on different tabs of Transaction VA03.
    I have also checked the attributes of the fields in the program. But no information why the fields are not displayed when the transaction is run. Also no where the fields are hidden dynamically using "Screen" statements.
    Please let me know what can be the possible reason for this.

    Hi,
    Check
    1) Authorization.
    2) User exit like MV45AFZZ.
    3) Screen exits.
    4) Try logging in using other user id and check.
    5) Check field status in config.
    Regards,
    Amit

Maybe you are looking for