CAT2 - Help required for changing data

The requirement I have is, if the data is entered for a particular activity type in CAT2, and if it exceeds the default hours alloted for that week, the extra hours need to be split into different activity types.
Say, this is the data entered: (Max of 35 Hrs per week as per IT0007) (Click on the link below to see sample data!)
[http://img32.picoodle.com/img/img32/5/12/21/f_datam_9dfadb2.jpg]
(The value for Thu is 5 and not 6 in the initial entry.)
The data has to remain exact until it reaches 35 hours and then the extra hours need to be split and entered in a different activity type. (BU is also counted as regular working hours and value for BU is to remain same)
I tried using the user-exit CATS0002 but since the user exit gets only the value of a single cell at a time, I am not able to process the data for my requirement. and this user exit is triggered only for the cells where the value is changed... if the data is already entered and the user changes some cell, I don't get the whole data entered and hence, I can't modify the already existing data on the timesheet.
Has anyone coded for a similar scenario? Your help will be really appreciated.
P.S: I am working on ECC 6.0

Hi Nazim,
There is an user-exit for validating the whole time sheet (I think it is nr. 6, but I am not sure), in this one you could check all the hours, but I am not sure if it will suffice for your requirement.
Regards,
Martin

Similar Messages

Master Data Required for 2LIS_02_HDR Data Source Installation

Hi All,
We are trying to install 2LIS_02_HDR DataSource through BC for our purchasing implementation . Can you suggest what all the Master Data required for this Data Source.
Regards,
Aditya

Hi ,
Please see this link.
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
In the same page you can find all details.
Hope this helps.
Thanks
CK

Requirements for master data template

HI,
Please let me know the basic requirements for master data template. What all the infotype to be involved in collecting master data template.
Thanks and regards,
Aylwin

Hi Alwyn,
If you dealing with india payroll definately Yes subject to you business process again.
Even though it is indian payroll some item may not applicable
For exmple other income resourece will be if you go to manufaturing industries you may face problem even though they got some they don't want reveal it to the employee.
in such that infotype is not required as per your business process.
Some states like UP there is no profession tax. Genrally we say profession tax need to be configure you need that master data.
If such case that might be wrong for that you need to give all the info
use PA30 t code go in side check what are the mandatory fields and take them as master data fields and put it in template.
If your client is able to give other field you can very well add them no harm in it.
But make sure you filled mandatory fields
That is the reason i was asking you to tell which coutry payroll you using
Best Regards

Help me for change security questions

plz apple help me for change security questions

Contact Apple Support to have your security questions reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

Urgent : Help required for logical comparison of two 2GB files.

Large files need to be compared depending on Business logic. No byte to byte comparison to be done. It would require reference of data written at the start of the file at some other later part of the file too while comparing two files. File needs to be stored in memory while comparison is done. Kindly suggest some way out which would give best performance. Memory limitations are 256 MB RAM.

File needs to be stored in memory while comparison is done.
Memory limitations are 256 MB RAM.You have 4 GB of data. You have 256 MB of RAM to put it in. Obviously one of those two assumptions has to be changed. By the way, what is the XML connection for this question?

Help Required in Master data Data model

Hello,
May some one help me in explaining the relation with the sales org, sales office, sales group, distribution channel, division, plant, material, Customer, controlling area, profit centre and cost element.
These are the info objects I have in my COPA data source. I need to decide about the master data now. I need to know which info objects can be used for master data.
Thanks in advance!
Help me with the inputs please!!
Points will be assigned!
Regards
Sri

Sales Organization
A organizational unit in Logistics that structures the company according to its sales requirements.
A sales organization is responsible for selling materials and services.
Sales Office
A organizational unit in a geographical area of a sales organization.
A sales office establishes contact between the firm and the regional market.
Sales Group
A organizational unit that performs and is responsible for sales transactions.

Distribution Channel
CA channel through which saleable materials or services reach customers.
Distribution channels include wholesale, retail, and direct sales. You can assign a distribution channel to one or more sales organizations.
Please search <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm">Glossary</a> for more....

PCUI 4.0, Search Help Required for New field

Hi everyone
I am working in CRM 4.0 Sales Order application
We created a new field in CRM sales Order in Header level in SAP GUI through EEWB.
The search help for the new field is working fine in SAP GUI. We want to add the same field with F4 help functionaliity in PCUI as well.
The field has been added in structure CRMT_BSP_SLS_OD1_General. It also shows domain value for the field however Origin of input field ie empty
The field has been added in PCUI and is successfully showing data inputted in SAPGUI
However we need search help functionality for the field
i tried these two steps
1) i checked on domain value checkbox and changed the field from input to dropdown. However the dropdown is empty in PCUI. Whenever i check box domain values for some field then all the possible values in SPA GUI are displayed in PCUI, however this is not working here.
2) I put Value_table in F4 of the field
This is also throwing up empty values
Am i missing something in this case
Please let me know how to go about it
TIA
Asad

Hi Frederic
Thanks for your response
I am not sure what is meant by regenerating the field group in this case
I added the entries for my view in the field group and generated the layout of the field group (If this is what you mean)
The field is working fine. I am able to save values to the field and able to see values saved in GUI.
I haven't linked search help of the field in PCUI
I am not sure how to go about it.
I used the data element in the structure for the field.
The data element has Domain entry in Entry Help/Check of the structure
If i check the Domain Value checkbox in my field group then the domain values should be available in dropdown if the field is dropdown
However i am not able to see the possible values of the field (It is present in SAP GUI)
Does something else needs to be done in this case
TIA
Asad

Can you help me about change data captures in 10.2.0.3

Hi,
I made research about Change Data Capture and I try to implement it between two databases for two small tables in 10g release 2.MY CDC implementation uses archive logs to replicate data.
Change Data Capture Mode Asynchronous autolog archive mode..It works correctly( except for ddl).Now I have some questions about CDC implementation for large tables.
I have one senario to implement but I do not find exactly how can I do it correctly.
I have one table (name test) that consists of 100 000 000 rows , everyday 1 000 000 transections occurs on this table and I archive the old
data more than one year manually.This table is in the source db.I want to replicate this table by using Change Data Capture to other stage database.
There are some questions about my senario in the following.
1.How can I make the first load operations? (test table has 100 000 000 rows in the source db)
2.In CDC, it uses change table (name test_ch) it consists of extra rows related to opearations for stage table.But, I need the orjinal table (name test) for applicaton works in stage database.How can I move the data from change table (test_ch) to orjinal table (name test) in stage database? (I don't prefer to use view for test table)
3.How can I remove some data from change table(name test_ch) in stage db?It cause problem or not?
4.There is a way to replicate ddl operations between two database?
5. How can I find the last applied log on stage db in CDC?How can I find archive gap between source db and stage db?
6.How can I make the maintanence of change tables in stage db?

Asynchronous CDC uses Streams to generate the change records. Basically, it is a pre-packaged DML Handler that converts the changes into inserts into the change table. You indicated that you want the changes to be written to the original table, which is the default behavior of Streams replication. That is why I recommended that you use Streams directly.

Yes, it is possible to capture changes from a production redo/archive log at another database. This capability is called "downstream" capture in the Streams manuals. You can configure this capability using the MAINTAIN_* procedures in DBMS_STREAMS_ADM package (where * is one of TABLES, SCHEMAS, or GLOBAL depending on the granularity of change capture).

A couple of tips for using these procedures for downstream capture:
 1) Don't forget to set up log shipping to the downstream capture database. Log shipping is setup exactly the same way for Streams as for Data Guard. Instructions can be found in the Streams Replication Administrator's Guide. This configuration has probably already been done as part of your initial CDC setup.
 2) Run the command at the database that will perform the downstream capture. This database can also be the destination (or target) database where the changes are to be applied.
 3) Explicitly define the parameters capture_queue_name and apply_queue_name to be the same queue name. Example:
 capture_queue_name=>'STRMADMIN.STREAMS_QUEUE'
 apply_queue_name=>'STRMADMIN.STREAMS_QUEUE'

Help required for a Remote cube query

Hi,
We are working on Remote cube, which has a source from a view built on R/3 base table. I need to extract the data to BW based on a current date due to huge volume of data(performance reasons) in the table. I have used an exit on R/3 to restrict to current date but the extract checker was showing the valid data ie only for current date. When i had built a query on Remote cube, the Report was showing complete data(restriction not working). We have even tried using an inversion routine in transfer rules to pass the selections to the Source system even then it doesn't work. Could you help if you have come across same kind of situation or you can suggest an alternate solution on the same but we have to use Remote cube.
Any suggestions asap would be highly appreciated and rewarded with full points.
Regards,
Raj

I can think of two ways to do it
Simple with no ABAP coding is a view
Create a view between a timestamp table and your big table
Put an entry into your timestamp table of the current date - then use a selection of this inside the view
Unforutunately you cannot use SY fields inside database views (otherwise you could have used these as a selection condition in the view)
The best way to do it is using a function module and passing the data from the query into the SQL statement
I prefer to do it the last way and also pass data through a generic structure - thus you manipulate the data inside the intial loop in the function module and don;t utilise further loops downstream in transfer rules
(to try and keep the reponse time down)

Minimum steps required for Change Management and Incident management

Hello experts,
Does anyone have a check list of the absolute minimum steps required for getting Change Management and Incident management functioning in Solution Manager.
I just need it to function with creating changes and incidents and be able to assign them, change their status and close them.
The purpose is to get an idea if this is something for us to use. If we then find it useable, then we will go for a full scale implementation using official guides, education etc.
I just need an absolute minimum guide for demonstrating the functions, and if you guys have any recommendations, things we should pay special attention to or other experiences feel free to tell me.
Thanks in advance.
Regards,
Kenneth

Hi,
There are a number of Blogs in the SDN about Charm and ServiceDesk, explaining first steps and more.
Check these to start:
http://wiki.sdn.sap.com/wiki/display/SM/ChangeRequestManagement
The Complete ChaRM Solution
Change Request Management scenario: Usual questions and known errors
First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
Regards,
Jan

Help required for FI Extraction

Hi All,
Currently i am working in FI Extraction (0FI_GL_4). In ECC, Document Posting is done using the TCODE FB01. After posting the document, i have checked table BKPF and BSEG and found data is available. But i have checked in delta Queue (RSA7). But data is not available.
I have already done INIT load and delta queue is created in RSA7.Can u pls help me why the data is not available in RSA7.
I have checked the table BWOM2_TIMEST and found some enteries over there.
DataSrce___Currnt Date__Time______Update Mode Time (GMT)___Time _______Last time stap int___Time_Zone_diff 0FI_AP_4_____19.08.2009__10:41:51____S__315.162.000.000__________6.194.681.990.000_______X__________________19800
0FI_AR_4_____19.08.2009__11:41:09____F_____0__________________________0______________0__________________0
0FI_GL_4_____18.08.2009__15:23:36____F_____0__________________________0______________0__________________0
0FI_GL_4_____19.08.2009__10:17:56____S__315.162.000.000__________6.194.681.990.000_______X__________________19800
I have already run delta for 0FI_GL_4. But in this table, the Update Mode is showing "S" instead of "D". Do i need to do settings for this.
Can u pls help on this issue.
Thanks,
Jelina.

Dear Diogo,
Thanks a lot for ur replies.. Now i can able to get data in BW.
Before extracting the data into BW, I have checked in RSA7 -> Display Queue. There is no entry displayed. But executing the delta load Info Package, i am getting data in BW.
Can u pls help how the data flows into BW.
I have checked for 0FI_AP_4 and 0FI_AR_4 data sources.After the document posting, immediately the entries are available in RSA7.
But for 0FI_GL_4 datasource, i dont find any entry in RSA7.
Pls help on this ..
Thanks,
Jelina.

OWB Support for Change Data Capture

Hi All,
Has anyone got OWB working with the Change Data Capture feature in the Oracle 9i database? I understand that CDC works by publishing changes through an advanced queue, which in theory OWB 9.0.4 upwards can have as a data source, but there doesn't appear to be any explicit support within the GUI for capturing CDC changes.
I'm also working on the assumption that we're talking about Synchronous CDC as found in 9i. 10g comes with Asynchronous CDC which I guess presents a different interface to the receiving program.
So - is there any support for 9i Change Data Capture in OWB, and has anyone got this to work in practice?
thanks
Mark

Mark,
There is currently no explicit support for the 9i CDC. You can use Advanced Queues to propagate the changes, but you will have to custom-build the capture infrastructure on the source side (set up the CDC, enqueue the changes in the appropriate form into the AQ etc.)
OWB will explicitly support CDC (10g async, which is the least invasinve method) in our next major release currently scheduled to be release in November of this year.
Regards:
Igor

Help required for unicode compatibilty

Dear All,
We are in a process of analyzing the impact of unicode compatibility for our environment.
Following is our scenario:
- ECC6.0 is non unicode systsem
- Need to buid unicode CRM 7, SCM 7, PI 7.1 and BI7
- Need to integrate the above systems to non unicode ECC system.
Our questions are :
1. Is there any performance consideration when using communication between an Unicode and non-Unicode system?
Is Unicode - Unicode faster than Unicode - non-Unicode communication performance wise?
2. Do we face any technical or functinal problems while trying to integrate
unicode BI/ NW Java Stack to non unicode systems.
3. Do we need to review our sizing estimations due to unicode implemenation?
5. what will be the storage consumption increase for unicode systems compared to non unicode?
It would be greatly helpful for me if you can clarify these doubts.
Thanks and Regards

Hi,
1. I think no one has really measured this. I expect a slightly higher requirement for Unicode <--> Non-Unicode interfaces.
2. Please have a look at SAP Notes 838402, 73606, 975768 and 1358929 for restrictions in Non-Unicode systems. SAP highly recommends to go for Unicode in the whole landscape.
3. and 5. If you use the SAP quicksizer (http://service.sap.com/quicksizing), then Unicode is integrated.
" Please note that the Quick Sizer results include Unicode requirements. For more
information on additional requirements caused by Unicode, see
http://service.sap.com/unicode -> Unicode Media Library -> Unicode information on
specific topics: SAP Business Suite Unicode Hardware Requirements"
Best regards,
Nils Buerckel
SAP AG

Are there requirements for deterministic data messaging for distributed LabVIEW applications across an Ethernet/IP network?

Our company, RTI, just entered the Alliance program at NI recently. We are curious if power users of LabVIEW have requirements for running distributed, networked multiple LabVIEW applications in a real-time, deterministic manner? We are not attempting to make this a sales call, but if we should move forward with development of VI's that would allow distributed LabVIEW applications. We have already scoped out the effort but would desire guidance on VI layout, descriptions and ways to give a "LabVIEW" experience and not a disjointed VI that looks unprofessional. We are not sure if demand exists for this requirement. We would like to talk with
and investigate what LabVIEW users want. We have attached a brochure on this real-time data messaging technology for your review. Maybe there is no need and we apologize for taking up NI Developer Zone bandwidth and your valuable time. We look forward to your responses.
Attachments:
NDDSProductBrief3-022.pdf ‏299 KB

We are developing applications which have a distributed layout. E. g. we have 2 or more test places which have no user interface and 1 place where all configuration and monitoring and data storage takes place. We use TCP/IP for the inter computer communication. For this purpose we have developed a library which has a similar interface and usage as the queue VIs from LV 6.0.2. We support automatic reconnect on TCP/IP level and an acknowledged transfer so the application programmer can choose to do some temporary storage on the local machine if the server part is not running for sometime. We have not seen any market for that so we do not plan to sell it.
From a lecture at the NI VIP days in Munich in 2001 personal from Siemens A&D stated to
get a real time like behaviour over ethernet with TCP/IP you have to take care that the load will not exceed 30% of the bandwidth.
For more information you can contact me at [email protected]
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

BAdI or USEREXIT for changing data of purchase order header - ME21N

hello all,
I would like to ask you any way to change the field "reason for change" of the Purchase Order header.
I tried implementing the method PROCESS_HEADER of IF_EX_ME_PROCESS_PO_CUST
or changing reason_code of structure ekko in user exits EXIT_SAPMM06E_006 and EXIT_SAPMM06E_006
but it seems not to work.
How can i do?..
sap. v. ecc 6.0

>
Shiva Kumar wrote:
> Use the user exit : EXIT_SAPMM06E_012: This is triggered on saving of a PO...and user can add validations etc in the exit...
> Cheers
It doesn't work...
>
Martin Voros wrote:
> you get reference to object IM_HEADER in method PROCESS_HEADER of BADI ME_PROCESS_PO_CUST. On this object you can call two methods - GET_DATA and SET_DATA. GET_DATA returns structure with type MEPOHEADER. You can change your field here and then call method SET_DATA with your modified structure. This should work.
> Cheers
..same thing for this solution...
the field that i want to change is RSCOD inside structure EREVGRID...it seems to have also get_data and set_data methods ( IF_REVISION_ITEM_DCM ),
but I don't know which BAdI to implement that has a object type ref to EREVGRID...
Edited by: E_M on May 13, 2008 11:08 AM

CAT2 - Help required for changing data

Similar Messages

Maybe you are looking for