CAT2 - Issue with workflow task TS20000460

Reposting the query in ABAP General Section.
CAT2 - Issue with workflow task TS20000460
Waiting for any suggestion?
Edited by: Amit Khare on Sep 10, 2009 3:01 PM
Closing due to no responses.
Edited by: Amit Khare on Sep 10, 2009 3:40 PM

Hi,
Could you figure out why the event linkage is breaking when you make it Gen.Task? I think, there is some problem in your wflow template. May be do a Syntax Check in the testing environment. If that time, some error happens, then by the System Defaults in the Event linkage SWETYPV, it will deactivate the linkage.
I don't think this has got anything to do with you making TS as Gen.Task. Did you see the even trace to see what's the error for linkage breaking ?
More info. would help in identifying the issue.
Regards,
venu

Similar Messages

  • LCM issues with Workflow, Task Lists, etc.

    I have found several issues with migrating certain artifacts using LCM v11.1.1.3. Note that I have admin rights in all systems, and that there are no special characters involved. So...
    1) Workflow: when migrating Planning Units all of them migrated, including their statuses. But not all PU comments (<annotation>) and logs (<log>) nodes migrated. It happened to almost all users - some who had 1-2 comments in the source system haven't got any in the target one, some got migrated only few (e.g. out of 5 in source, they got 3 in target). Since it happened to all users, it doesn't seem to be security. I have also checked (for those who partially failed) some other nodes, sequence, action, process state - they all seem to be OK. One curiosity I've spotted in few cases, is that in source LCM file (.xml) "priorOwner" node has the name of the user I am investigating, while in the target file (taken after the migration), for that same PU, that node is empty, actually says "null".
    Any ideas why this might be happening?
    2) Task Lists: when exporting TLs (in LCM) on occassion <dataForm> node in XML file would be missing for the task that actually has it attached. Again, no special characters are used, and I am admin. Then I tried to use TaskListDefUtil, and even if that list has required node, when I try to import, the task is still not attached to the form. I had to delete all TLs, then use Util files to reimport.
    Anyone with similar experiences?
    smilo

    I had issues with tasks lists using LCM in instances where parent task name was same as child task or a task has same name planning web forms. You might also find issues with exporting webforms with business rules attached to forms where form is on plan type A and business rule is on plan type B. In this case, after LCM import, plan B business rule will lose location reference to correct plan type and get associated with web form plan type. In this case you will need to attach business rules again.

  • Issues with Approval Task IN IDM 7.1

    Hi,
    I have been facing issues with Approval task.
    Firstly,
    I have created an Approval task with 'Mskeyvalue' and 'Mxref_mx_privilege' as attributes.
    I am having a problem in the Approvers workflow UI where, we see these approvals.
    It not only displays the requested privilege,but also the already provisioned privileges of the enduser to the approver.
    He will not be able to recognize which privilege has been requested.
    Is this an already known issue which has been sorted out in recently updated patches?
    If not can you suggest me a solution for this.
    Secondly,
    The privilege requested by the end-user is getting provisioned to the backend,even before it is Approved.
    Since Provisioning tasks are mapped through repository,privileges are getting provisioned as soon as
    an entry is made into the Identity Stores.
    But,Ideally the requested privilege should not be proviosioned to the backend until it is approved by the Approver.
    Is this an already known isuue which has been sorted out in recently updated patches?
    If not can you suggest me a solution for this.
    Thanks and Regards,
    Joel
    Edited by: Joel Sundararajan Davis on Jul 16, 2009 11:04 AM

    Joel,
    I'm afraid the approval process is not quite this simple.  You are correct, if you have provisioning setup on the repository for a privilege it will be assigned immediately.  The approval task as you are using it works as an 'interrupt' to a process - nothing more.
    There is an entry type called pending value that you would need to leverage in order to have privileges requested route for approval.  This pending value object is created by default for role requests in 7.1, but I'm not sure how to create a pending value for a privilege.
    Which brings to mind a question - is there a reason you want users to request privileges instead of roles? In general I think the security model is setup so that users are assigned roles which contain one or more privileges.
    If you do choose to use a role instead of privilege, simply set the attribute MX_APPROVAL_TASK to the id of the approval task you want to use and the system will do the rest.  The display you referenced in the first part of your question will always display the current values of the attributes you select for the user, so don't try to display the roles there - just display the user id, name, whatever else is helpful and when the approver clicks on the user id they will get the approval details which will include the requested role.
    Also, please note that if you would like to assign a role directly anywhere (bypass approvals) you can use the switch: {direct_reference=1}
    -Geoff

  • Issue with the Task TS17900100 in HCM p & f - Transaction brackets damaged

    Hi Experts,
    We have a custom HCM processes & forms which updates the backend INFTY as the result of execution of Step Process Forms - with the Workflow Task TS17900100
    This works absolutely fine in the DEV System. But when I transported the workflow in the QA environment it worked fine for the first time.
    Ever since then we are getting follow issue -
    The backend INFTY does not get updated.
    On further checkin in SWIA we found that step with the task TS17900100 ( Process Form ) fails and throws the following error
    1.Transaction brackets of the workflow has been damaged
    2.Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status STARTED
    3.Error updating the process object
    Would appreciate if I can get any help in this regards.
    Thanks in advance!!
    Regards,
    Akshay..

    Hello,
    Make sure the wf is active in QA (re-activate if possible), check the transport for errors, check authorizations for WF-BATCH perhaps delete and recreate via SWU3?), refresh the buffers (SWU_OBUF).
    Please let me know if any of this helps.
    regards
    Rick Bakker
    Hanabi Technology

  • RCATSB01 - Variant "Workflow": Task TS20000460

    Hi.
    I've got some question regarding approval of time.
    The Customer have an older version of SAP, so we are using task TS20000460 for approval.
    The Customer wanted that the employee (the person who registered time) should be notified when the manager rejects working time.
    In variant Workflow (program RCATSB01), I found a possibility to do that. I have marked "Send notification", and set it to be required. This works, the manager have to choose reason before rejecting the hours.
    Now, some questions regarding this:
    1. Is this the only way (in SAP standard) to send notification back to the employee? The Customer wanted that the manager should be able to <i>write down the reason for rejection</i>, and not having to choose it from a drop-down list (table TCATSD).
    2. Why do I have to manually execute the program RCATSB01, variant Workflow, before registering time? If I doesn't execute it, the workflow receives the status "In Process" after rejection (and goes no-where). When I execute the program with the variant, the workflow get status "Completed" after rejection.
    3. Why doesn't the employee receive a notification of rejection in his SAP inbox (Documents folder)?
    Best regards,
    Eli-A

    Hi,
    1. You need to create one variant called "WORKFLOW"  in the program RCATSB01.
         In selection screen you assign
         Approval Program = 'A'.
    2. You need to do the agent assignment for task, Go to PFTC
        Additional data->Agent assignment->Maintain->attrubutes and select general task.
    Thanks and Regards,
    Chandra Madapati

  • Issue with Dataflow Task in SSIS Package

    Hello Everyone,
    I have recently created an SSIS package to Load data from Flat file to SQL Server Table, it was working fine. Now I have bought a new laptop and copied the projects into this new system and changed all the connection managers(Flat files) accordingly. 
    Problem is, when I previously ran the package(With File1) in old laptop and check the distinct count on a table it was perfect, but when I ran the same package with same File on New Laptop, the Distinct count gives me an issue with particular record.
    Eg: Distinct Count with old laptop Run , 10,20,100
          Distinct Count with old New Run , 10,20,100  , 100
    There is a Space being generated for a particular record, when I run the package on new laptop with same File as old one.
    Any suggestions on this, I could not exactly figured out the Issue.
    Please Help.
    Thanks
    Thanks, Please Help People When they need..!!! Mark as answered if your problem is solved.

    You need to tell the responders here how exactly to reproduce your issue and provide the file.
    I do not know how the "distinct count" works.
    Seems to me it appears to be a database issue not SSIS.
    Arthur
    MyBlog
    Twitter
    When I perform the above query on old laptop, this gives me a result set of
    10
    20
    100
    When I perform the Same query on New laptop, this gives me a result set of
    10
    20
    100
    '100  ' (No Quotes please see the spaces generated)
    Thanks, Please Help People When they need..!!! Mark as answered if your problem is solved.
    Can you give us an idea of tasks you're having after the file source?
    Particulary see steps where you are doing some data manipulations.
    Please Mark This As Answer if it solved your issue
    Please Mark This As Helpful if it helps to solve your issue
    Visakh
    My MSDN Page
    My Personal Blog
    My Facebook Page
    I am using simple Flatfile source and oledb destination in here. this is causing issue, all the other tasks after this are loading perfectly except this.
    Thanks, Please Help People When they need..!!! Mark as answered if your problem is solved.

  • Issue with getting task:acquiredBy in a BPEL Composite.

    Hi,
    We are facing an issue with an XPath query:
    <assign name="RescanHumanTask_1_readTask">
    <copy>
    <from variable="taskAssignedMessage"
    part="payload"
    query="/taskservice:taskAssignedMessage/task:task"/>
    <to variable="RescanHumanTask_1_globalVariable"
    part="payload"
    query="/task:task"/>
    </copy>
    <copy>
    <from variable="RescanHumanTask_1_globalVariable"
    part="payload"
    query="/task:task/task:systemAttributes/task:acquiredBy"/>
    <to variable="inputVariable"
    part="payload"
    query="/client:process/client:invoice/contentType:assignee"/>
    </copy>
    </assign>
    It gives us an error:
    Error in evaluate <from> expression at line "427". The result is empty for the XPath expression : "/task:task/task:systemAttributes/task:acquiredBy".
    Can someone figure out a way of getting the System Attribute task:acquiredBy inside a bpel flow.
    Regards.
    --Irshad.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    acquiredBy will be empty unless it is acquired by any user. you should pick value from last updated by field.

  • Issues with Windows TasK Scheduler

    Hi!
    I'm having two issues recently with Windows Task Scheduler, and I'm wondering if anyone else has experienced this and know of a resolution. We are on Windows Vista.
    Error value 2147750687 - The task we are using has been running successfully since day one, all of a sudden, two concurrent jobs got triggered the other day, thus one of them failed and gave us this error. Why would the scheduler kick off two jobs start at the same time? How can that happen? The settings are "run with the highest privileges" and run whether user is logged on or not".
    Error value 2147549186 - On this one, the task was running as scheduled, no errors in the log, then all of the sudden, after 10 minutes into the job, it re-started “due to a failure”. The settings are set to restart after 5 minutes, 3 attempts, but since it was running, and our logs do not identify any issues, what could have caused the scheduler to think there was an error?
    Joe

    Hi LordTim,
    >>However, I cannot get Access to load<<
    How did you load the Access? Did you use Access object to automate the Access applicaiton?
    If I understood correctly, did Access load successfully when you in a normal script?
    If yes, I think the issue may relative to the Task Scheduler. I suggest that you get more effective response from
    Windows Community forum about Task Scheduler issue.
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Issue with Workflow template versions? Can any one suggest what to do.

    Hello All.
    Actually in quality system there is a workflow instance in error. I identified the error and fixed the issue with a new development and transported to quality. Now when i restart the error instance in quality, its not picking the latest template with additional steps i developed, instead, it is catching the older version.
    For a fresh instance, my newer version of workflow is getting triggered, why not for error workflow.
    I used swu_obuf to synchronize the buffer but no use. What could be the resolution.
    Please suggest.
    Regards
    Prasad.

    Hi Prasad
    Running instances / Waiting / Or in error continue to run in the version in which they were started.
    That is why Version increments in QA / PRD when you move a change... so that any running, waiting, error instance can pick the same version of the workflow.
    It will not pickup your changed version. Logically it would be incorrect - start in Version A and end in Version B..... say start in version which "Auto Approves" a PO of value INR <=100 .... error .... restart in a changed version which now had auto approve limit of INR 1000. The PO will not be auto approved whereas the day it was started, the limit was only 100. So it makes sense to restart a workflow in the same version in which it was started. That is how the architecture has been designed.
    To conclude, if the steps which went in error because of the data from your previous step (which you have changed now) - see if you can change the container data and restart the WI from SWIA so that the work item starts with a new set of data. Else, discuss with business owners to cancel these workflows and restart new ones.
    regards,
    Modak

  • Cloning issues with workflow

    I'm hoping someone could help with my issue with cloning.
    We are on v 11.5.10.2, oracle db version 9.2.0.6 on RHEL4 with all pre-req patches per Rapid Clone note 230672.1.
    I've followed this instructions but I cannot get Workflow Mailer Service, Workflow Agent Listener Service, and Workflow Document Web Services Service to start up.
    I've checked my environment variables and they are all properly changed, tried re-running autoconfig, tried regenerating jar files after modifying AF_CLASSPATH. I mean everything and I am completely stuck and baffled by this issue.
    Any help is greatly appreciated.

    are you talking about the clone instance,
    if yes you have to do the following
    update wf_notification_attributes set text_value=replace(text_value,'http:// prod.domain:8000/pls/prod','http://clone.domain:8036/pls/test')
    where text_value like '%http://prod.domain:8000/pls/prod%';
    update wf_notification_attributes set text_value=replace(text_value,'http:// prod.domain:8000','http:// clone.domain:8036')
    where text_value like '%http://prod.domain:8000%';
    update wf_notification_values set text_value=replace(text_value,'http:// prod.domain:8000','http://clone.domain:8036')
    where text_value like '%http://umappprod.umniah.com:8000%';
    update wf_notification_values set text_value=replace(text_value,'prod','clone')
    where text_value like '%clone%';
    update wf_agents set address=replace(address,'prod','clone')
    where text_value like '%prod%';
    update wf_systems set name='clone', DISPLAY_NAME='clone'
    where name like '%prod%';
    where clone is the new cloned instance and prod is the source instnace.
    also on this clone instnace you need to make sure that you have access to your mail server.
    fadi
    http://oracle-magic.blogspot.com

  • Ovi Suite/N97 Issues with recurring tasks

    Hi
    I have finally managed to get my N97 to work with Ovi Suite (v 2.0.1.35) but am having some very annoying issues when it comes to syncing calendar & tasks (personally I wish I could just sync the calendar and not the tasks...).
    I have several recurring tasks in Outlook. They feature in my task list on Outlook as just one task with the recurring symbol next to them.  Whenever I sync my N97 for some reason, on both the N97 and Outlook the recurring tasks disappear  and are replaced by a years worth of the recurring task.  This means that both my N97 & Outlook task lists are suddenly overflowing and impossible to manage.
    Has anyone else experienced this & is there a way round this, or a way to simply sync calendar and not tasks??
    Thanks
    Nick

    Just tried editing my previous post and forum wouldn't let me.
    Anyhow, I just discovered that Ovi suite didn't mark my tasks as complete - it deleted them.  It also deleted quite a large chunk of my completed tasks as well.  I have absolutely no idea why it would have done this, but to say it's very frustrating is a massive understatement, I'm now having to rebuild my task list from memory.
    Never had any of these issues with PC Suite....
    P.S - In my Ovi suite options I have conflict resolution set to Outlook not Device...

  • Issue with Workflow in a SharePoint-hosted App Application

    Hi,
    I have created a Sharepoint-hosted app which has a list workflow in it. After I deploy it to the sharepoint server,  I can not find any workflow under the associated list.
    However, I did have target list associated with workflow in workflow project property.  
    (My app and worflow is developed in VS 2012)
    I have searched the forum and found some similar question. However, all of them don't have useful answers.....
    Can anyone give me some help~?

    Hi Baron123,
    I can reproduce your scenario, that create an app with list, and add a workflow associates with it, the workflow is not working, that seems doesn’t associates successfully.
    Before I can tell why this happens, I found a helpful blog about keeping the list definitions and workflow definitions separate, use Handle APP installed event receiver to wire up a workflow to lists in app web or host web.
    As it is not a good solution to deploy the list and workflow in the same app solution, because that if you redeploy the app the date will be lost, the list will be new created, so I would suggest you to reference the blog, check whether this can meet your
    requirement.
    SharePoint Apps and Workflow:
    http://jonfancey.azurewebsites.net/2013/03/22/SharePointAppsAndWorkflow.aspx
    Thanks,
    Qiao Wei
    TechNet Community Support

  • Render issues with multi-task

    I have this issue with render.
    for example, i load up my projects and render it, if i run into editing problems cus i forget how to do things ill load up firefox find my solution then go back into FCP and it says i need to render the whole project again.
    anyone else run into this or know a fix?
    please and thanks

    1280x720 Motion JPEG A (.mov) @60fps
    im using the DVCPRO HD - 720p60 preset in FCP
    ive used this same setup before without issues
    hope that helps.
    also im using both stills and video

  • Issue with Capture Task Option showing correctly in MDT 2013

    I am aware that having the variable of DomainJoin will prevent the capture dialog from appearing when running the task. The problem is, even when the options are greyed out due to the domain settings not being applied from a different setting in the workflow
    it still breaks the task. 
    E.G.
    I am using the database, and have my workflow as such:
    [Settings]
    Priority=Model, TaskSequenceID, LSettings, CRoles, RApps, LApps, MMApps, MMSettings, Default
    Properties=MyCustomProperty
    DataBase:
    Location Settings: Overall settings for Domain join, wizard skips, etc info per gateway 
    Role Apps: Apps per role
    Make/Model Apps: Apps specific to a piece of hardware
    CustomSettings INI:
    Model/Task Sequence/Default:  I have tried to null out the DomainJoin settings with these variables by adding workgroup join by task ID, Model, etc and nothing seems to work. I've verified in other tasks
    that these settings take place of  what's in the DB, but the DB settings are still there, greyed out and causing an issue. 
    [X86SYSANDCAP]
    JoinDomain=
    JoinWorkgroup=WORKGROUP
    [VMware Virtual Platform]
    JoinDomain=
    JoinWorkgroup=WORKGROUP
    As shown below the model/TS specify the workgroup  (1st pic is normal deploy, 2nd is cap) but the greyed out settings are still having an effect. Skip Capture is set to NO at each level, and when I remove the Domain from the DB it shows up correctly. 
    Not sure what to do besides removing the domain everytime I want to do a capture, which seems a bit unreasonable and I don;t want my T1s in the DB. 

    I highly recommend to always use the standard Client task sequence for a build and capture. Much more reliable.
    Check out these Resources, the info is also valid for Windows 7:
    TechNet Docs - Create a Windows 8.1 Reference Image
    http://technet.microsoft.com/en-us/library/dn744290.aspx
    Virtual Hands-On-Labs - Creating a Windows 8.1 reference image  
    http://go.microsoft.com/?linkid=9845755
    How to deploy Windows 8.1 (and Windows 7) with MDT 2013 - The Resources
    http://www.deploymentresearch.com/Research/tabid/62/EntryId/186/How-to-deploy-Windows-8-1-and-Windows-7-with-MDT-2013-The-Resources.aspx
    / Johan
    Regards / Johan Arwidmark Twitter: @jarwidmark Blog: http://www.deploymentresearch.com FB: www.facebook.com/deploymentresearch

  • Issues with Workflow triggering

    Hi All,
    I am having a problem in the PO approval workflow. The problem is as follows.
    When I have multiple levels of release blocks, after each level of approvals the successive approver gets a workitem created in his inbox. If any approver rejects the approval all previous approvals are rejected and a work item created in the first level approver's inbox. But when the first level approver rejects, a work item should be created in the 1st level approvers inbox but it is not created.
    Can any one help me with how to troubleshoot this issue? Could you also help me understand where do we configure to trigger the workflow for this particular event?
    What could be the possible reasons for such a discrepancy?
    Thanks.
    A

    Hi Amit,
    declarae a workflow container element Status with values as 'Y' & 'N'.
    i suggest u use
    Loop until Status eq 'Y'
    if the condition is N ie No the loop continues and the first level approver shall get the work item created else the work flow continues.
    and use SWEL to trace the Event for PO Creation  and trigger your workflow with that event.
    hope it's clear..
    thanks

Maybe you are looking for