CAT2 T-CODE: changing A/A type texts when pressing enter

Hi all..
I am working with CAT2 T-code.
after giving data entry profile and personnel number when I am giving entries in A/A type and pressing enter one text is displayed for that particular type. If I am pressing enter one more time, the text of that A/A type is again changing to some other text.
My requirement is to maintain the same text which is been populated in F4 help of that A/A type field.
pls help me out with your valuable suggestions.
Its urgent.
Thanks in advance..

I have found it..
there was a Z class maintained for triggering these values.
But these are populating different values which I need to stop and provide only the values which are been populated for F4 help of that particular field.
There was a field moabw in catsd.
I hv to maintain this field with 08 value to get the desired output.

Similar Messages

Dynamic change of wage type texts on salary slip

Hi Gurus.
Maybe someone can help with a request.
I want to do following.
If someone input a wage type e.g. 6666 in Infotype 0015 I want to open a new input-field.
In this input field the user should enter a text.
In the payroll run I want to change the wage type text on the salary slip for wage type 6666 to the text inputted in the new field.
We are using HRForms (PE51) for the salary slip.
Does anybody have a solution or some tips how I can implement this?
Thanks for your answers.
Regards.
Stefan

Hi,
Do not change the wage types , you have to delimit the wagetypes from a validity date as you have assigned minimum and maximum amounts for your wage types.
Regards,
Kapil Kaushal

OneNote 2013: Font changes when pressing Enter / Return key

I have the same problem as this guy (who didn't get a relevant answer): http://social.technet.microsoft.com/Forums/office/en-US/233833f7-dde8-414d-bdca-604ed8d57667/onenote-2013-font-changes-when-pressing-enter-return-key?forum=officeitpro
I set my default to Calibri 14, but every time I press enter (I make a lot of bullet lists) the font changes to Calibri 11.

Hi,
Did you change the default font after you typed a few words in a note container?
Setting the default font in Microsoft Office OneNote affects text that you type in new note containers only. It does not affect existing text or text that you add to existing note containers.
If you want to change the font in an existing note container, you need to change it manually under
Home tab > Basic Text.
Thanks,
Steve Fan
TechNet Community Support

I have recently bought Photoshop Elements. It has a redemption code on a seperate card but when I enter the code it says it's invalid.

I have recently bought Photoshop Elements. It has a redemption code on a separate card but when I enter the code it says it's invalid.

Where are you entering the redemption code?
Try Redemption Code Help

Problem when pressing ENTER for InputText object text

Hi,
I encountered a very strane anomly when pressing ENTER for
InputText object text.
1) I set the InputText object for having maxium 2 characters.
2) I set the InputText object for getting only numbers using
.restrict= "0-9";
Now, say the InputText is now empty.
1) Say I press the number "7" - the text line is now
containing - "7".
2) Now, I press ENTER - the "7" is cleared from the text
line.
Now, while the text box is clear, we think that we can insert
2 numbers.. but not!
3) I press a number, say "9" - the line contains "9"
4) I try to insert another number... but I can't!!
In order to be able to insert two numbers, I have to press
twice the Backspace in order to clear the "9" , and another ghost
note (the ENTER?).
How can I solve this anomaly?
Thanks
Yossi

Thank you very much! it works.
(Those tiny anomalies are so annoying, that it is so great
feeling to have them solved, thanks)

Changing the Condition type Text in the Purchase Order

Hi SAP,
Hi,
We have a requirement where by we need to change the Description of the condition type text in the Purchase order.
The condition type is a entered at item level.
Normally this description comes from the Condition type Definiton i.e., T685T-VTEXT.
can any one of you suggest a User exit or a method where by we can change this text at PO.
Has any one of you came across such situation before. if so please provide me with your inputs.
Thanks
Best Regards
ShitalD
Edited by: Shital Deshpande on Feb 21, 2010 1:07 PM

Hi,
I think it is a config setting..Please check with your functioal consultant regarding the same.. I won't suggest to change the standard SAP table T685T but you can keep it as last option .
From SPRO you can follow the below path
Sales and Distribution->Basic Functions -> Pricing > Pricing Control -> Define condition types.
Regards,
Nagaraj

Firefox 4 does not validate REGEX in "pattern" attribute of INPUT (type = text) when diacritic characters are includes (Chrome does).

Using HTML5 and Firefox 4.0.1, following code :
<form>
<input type="text" name="my_input"
pattern="^[A-Z]([a-zA-Zçéèâêîôûäëïöü-]{1,47}|.)" />
</form>
fails to validate input like "François" or "André" but "Francois" ou "André" is accepted. The problèm occurs with string including any diacritic character.
(The REGEX validates using "Expresso" Regular Expression Editor.)

See https://developer.mozilla.org/en/HTML/element/input
<blockquote>pattern HTML5:
A regular expression that the control's value is checked against. The pattern must match the <u>entire</u> value, not just some subset. Use the title attribute to describe the pattern to help the user. This attribute applies when the value of the type attribute is text, search, tel, url or email; otherwise it is ignored.</blockquote>
<pre><nowiki>pattern="^[A-Z]([a-zA-Zçéèâêîôûäëïöü-]{1,47}|.)$"</nowiki></pre>

Change PR item short text when created from Work Order

Hello,
Is there a way to edit the PR item short text when the PR is generated from a Work Order. When we open the PR, the item short text is grayed out.
We have created Material Master Number for Contract/ BPA items. When we input that particular material number under the components tab on the WO then release it ,it creates a PR. The Material Master description gets transfered to the PR.
Our issue is that the Material Master is to generic and we would like to change the description on the PR level.
Is this possible?
Thanks,

Hi
I think neither there is any way to change the Material Description in PR nor its a good SAP Practise as it is having lot of implecations of stocking , physical inventory , reconciliation etc .
If Item codes are generic suggest if u can use the PR or PO long text to enable the buyer for the procurement & supplier for supply the material as per long text specifications .
Regards
Sameer

Sites won't load after I type it and press enter.

I tried to get firefox 3.6 at start but everytime i type a certain url in the address bar and press enter, it won't load. I always needed to click the go button using my mouse.
I tried IE and GC but they both load all websites when I press enter.
Just inconvenient to always click the go button instead of just hitting the enter button :(

This issue can be caused by an (AVG) extension that isn't working properly.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Space preserved when pressing enter in the code view

Sorry guys. This may be a old problem in Dreamweaver cs5.5, but i can't find any solutions of solving this.
When i press enter in the code view,same as the following:
<div>
         <div></div> ------ (1)
         <div></div> ------ (2)
</div>
Dreamweaver cs5.5 help me to indent.
When i preview the page in my browser, i find that there is space between two div (1) and (2). (i set the display of block as inline-block in css) (but there is the same problem when i change div to span too)
If i code as the following:
<div>
         <div></div><div></div>
</div>
The space vanish.
The problem is how can i code or set the dreamweaver such that there is no space preserved when i code as the top one?
Thank you.

Hi yftsol,
I've just been working on the same problem. My code formatting vanished upon uploading my site to my server. What I think is happening is that Dreamweaver CS5.5 is getting confused about how to interpret the use of the enter key.
The fix for my site was to go up to the opening <html> tag and remove all whitespace between it and the doctype declaration. Then, I moved the opening <html> tag back down to my second line of the document and re-uploaded the file. Then, when I viewed the source code from the live site, everything was formatted properly.
I hope this helps!
Rosemary

Tabular Forms - how to change the color of text when the field is disabled

Hi,
I have a tabular form and some of it's columns are disabled showing text in grey color...
is there a way to change the color to black and bold the text...?
thanks

Okay, i've taken a look at your example.
The column formatting does not work on the input fields. The help on the item says that it generates a span with a style attribute. This would work for a display field, not for an input field.
Css like i've written should be in the style tags, put up in the header section of the page (page -> edit -> header region).
You've already put script tags there, the style tags go there aswell. You shouldn't even need to put your script tags in the header region. Just put your code up in the javascript functions region (without the script tags).
However, i tested in firefox and here color works on an input field, changing the font color. In IE it does not do this. Cross browser implementations and such, not much to do about it here. See http://stackoverflow.com/questions/602070/changing-font-colour-in-textboxes-in-ie-which-are-disabled.
I did notice that you build your form with a bunch of input fields, which you disable through javascript in the footer of the region. Then on submit, you set the disabled to false again for all those fields! If you want those fields to always be submitted to the server, why wouldn't you use the readonly attribute? Readonly fields are always submitted, and can't be edited by the user. Plus, readonly fields CAN be styled however you want! You can get rid of the javascript code in your header then.
Even the javascript in the footer is not necessary. If you just add 'readonly="true"' (without single quotes) to the element attributes of your items (edit column -> column attributes region) = no javascript at all (less maintenance).

Change 'new form submission' text when receiving email from contact form.

Hi,
One of our clients has asked us to change the text they receive when they get an email from their contact form.
It currently says: 'new form submission'
they want it to say: 'West of the Moon ~ Ayr ~ Website Enquiry'
We have tried changing the name of the form but this only changes the subject in the email not the wording on the email. Is there any way to do this?

Hi Richard,
Please check the php script to which the web form submits to and then open that with a text editor and edit the verbiage that you want to there.
PS - You will need to make these changes after every export from Muse as Muse will override them on every export/upload.
- Abhishek Maurya

Trackball button and 'back' button type letters when pressed

Pressing the trackball down on my blackberry now types the letters 'uo' rather than selecting whatever message or icon I'm hovering over. Pressing the 'back' button beside the trackball types the letters 'hl' rather than returning me to the previous screen. Not sure how this happened--any ideas would be greatly appreciated. Thanks!

Hi and Welcome to the Forums!
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is it possible to change the wait time for when you enter an incorrect password on your iphone/ipad?

I reaaally hate how anti-procrastination apps like ColdTurkey don't work for apple products, because what's the point of restricting internet usage on the computer when you can just access it from your apple device? There's no point in using the parental controls or setting passwords for obvious reasons, either.
So I had an idea: from what I know, after guessing the password incorrectly 6 times, the device is locked for 1 min, 7 times, 5 min etc. So I was thinking, is it possible to change the settings, for example, to lock the phone for 60min after 3 wrong password attempts? This would be incredibly helpful!!
(if you know a way but don't want to post it here, please email me instead!)

Thanks a lot Rob. That works.
"Rob Woollen" <[email protected]> wrote in message
news:3f29b665$[email protected]..
java -Djava.io.tmpdir=<tmpdir path> weblogic.appc
-- Rob
Bernhard Lenz wrote:
I realized that weblogic.appc creates a working directory
/var/tmp/appcgen
when compiling ejbs. What happens if 2 developers run weblogic.appc atthe
same time? Will they be using the same temp directory and therefore getin
each others way? I'd rather like to create a temp directory which isunique
for the machine. Our build scripts would be able to create such adirectory
but I couldn't find anything in appc to set the temp directory.
Do you have any advice?
Thanks for your help.
Greetings
Bernie

Does anyone have trouble with the cursor changing lines in Apple Mail when pressing the letter '

Since installing the Yosemite update, when typing an email in mail, the cursor changes lines when I press the ' key. Eg: the word don't becomes don'
t
Is it a setting or a bug? Help???

Hello,
Does anyone have an interface program for LabVIEW and any of the Campbell Scientific data loggers? The file on this forum by Frank appears to be corrupt. Any help is appreciated.
Thanks,
Eric

CAT2 T-CODE: changing A/A type texts when pressing enter

Similar Messages

Maybe you are looking for