Cat4000-IOS not seen as member of its own vtp domain in CM

Recently we upgraded to CiscoWorks CD 5 V1. Cat4000-IOS devices are now supported in RME and CM. But in CM Topology Services the Cat4000-IOS devices are not seen as members of their own VTP domain. Instead, each access switch behind the Cat4000-IOS forms a single switch cloud (vtp disconnected domain) and no vtp server is found for that domain.
The two Cat4000-IOS serve as VTP servers and HSRP-Gateways for five access switches (Cat4000 with CatOS) connected via dot1q-trunks to each Cat4000-IOS.

I am having the same problem. I followed the link and the document says "A link in a VTP domain is not set to trunk. There are devices in this domain that do not communicate through any trunk." I have checked the devices and they are set up to trunk. In CiscoWorks - topology services, when I run a Logical Discrepancy Report It says the domain is disconnected and it is showing 15 sets. Set one shows my two 6509's, one 4006 & all of the 3524's connected to it. All of the other sets have only one 3524 in each of them. The trunk ports from two of my 4006's to my 6509's are as follows:
interface Port-channel1
description Uplink to C_BCAD_2213_6x_1
switchport
switchport trunk encapsulation isl
switchport mode trunk
no snmp trap link-status
On one of my other 4006's the trunk port is as follows:
interface Port-channel4
switchport
switchport trunk encapsulation isl
switchport mode trunk
description Uplink to C_BCAD_2213_6x_1
no snmp trap link-status
As you can see, they are both set up the same.
Also in Campus Manager, only the 4006 in set 1 & all of the 3524's show up graphically as clients. The two 6509's show up as servers.
All devices are running VTP version 2. The revision number on all devices is the same (10).

Similar Messages

(XSRWLD06) A column value is not a valid member of its target dimension

We are facing a strange issue that all the records gets rejected when attempted to load the cube. The error message is - (XSRWLD06) A column value is not a valid member of its target dimension
This cube is simple and has only one dimension and one measure. The dimension has only 2 records and mapping appears to be correct.
Really confused and unable to find the cause of the problem. Pls can you help
Query used to populate the dimension
==========
SELECT DISTINCT /*+ bypass_recursive_check */ T1."ACCFLAG_DESC" ALIAS_3, T1."ACCFLAG_DESC" ALIAS_4, T1."ACCFLAG_DESC" ALIAS_5, NULL ALIAS_6, 3 ALIAS_7 FROM NEDDWOWNER."OWNERSHIP_ACCOUNTS" T1 WHERE (T1."ACCFLAG_DESC" IS NOT NULL) UNION SELECT DISTINCT /*+ bypass_recursive_check */ T2."ACCFLAG_DESC" ALIAS_8, CAST (NULL AS VARCHAR2 (60) ) ALIAS_9, T2."ACCFLAG_DESC" ALIAS_10, NULL ALIAS_11, 0 ALIAS_12 FROM NEDDWOWNER."OWNERSHIP_ACCOUNTS" T2 WHERE (T2."ACCFLAG_DESC" IS NOT NULL) ORDER BY 1 ASC NULLS LAST
===========
Query used to populate the cube
==========
SELECT /*+ bypass_recursive_check cursor_sharing_exact no_expand no_rewrite */ T5_ACCFLAG_DESC ALIAS_13, SUM(T8_ES_CBSCCO_AJ_GBP) ALIAS_14 FROM ( SELECT /*+ no_rewrite */ T1."OWA_SEQ_ID" T8_OWA_SEQ_ID, T1."ES_CBSCCO_AJ_GBP" T8_ES_CBSCCO_AJ_GBP FROM NEDDWOWNER."VW_ACCOUNTS_MON_CUB_LOAD" T1 ) T8, ( SELECT /*+ no_rewrite */ T1."OWA_SEQ_ID" T5_OWA_SEQ_ID, T1."ACCFLAG_DESC" T5_ACCFLAG_DESC FROM NEDDWOWNER."OWNERSHIP_ACCOUNTS" T1 ) T5 WHERE (T8_OWA_SEQ_ID = T5_OWA_SEQ_ID) GROUP BY (T5_ACCFLAG_DESC) ORDER BY T5_ACCFLAG_DESC ASC NULLS LAST
===========
Rejected Record
Consumption 0
Production 0
Error:
(XSRWLD06) A column value is not a valid member of its target dimension.

Hi - This is still unanswered. Will the datatype of the source column mapped to the member and the fact table create the problem? As we are in the middle of evaluating different OLAP products, any inputs on the issue, will be really helpful...

Mac OS 10.5 / I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!! I do have the OS dvd that i purchased years ago... But my computer will not start from it on its own. My

Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guys

Okay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;)

IMac does not go to sleep on its own- HELP!

I have an iMac G4 17", it's about three years old, and I absolutely love it, except now it does not go to sleep on its own. It will go to sleep when you select Sleep from the Apple menu, but not when it has been inactive. In system preferences under the energy saver menu it is set to sleep after being inactive for five minutes (screen sleeps after three), and the screen does power down, but the computer itself never goes to sleep on its own (you can still hear the processor making noise (fans?) and the little white sleepy light doesnt come on) I can't seem to figure out what could be making it stay awake (no applications are running), I'm not sure if it has something to do with my external DSL modem (though i think i had the problem before i got the dsl), I tried turning off the "wake for ethernet network administrator access" and it didnt change anything. Any help?

This is for a Mac that won't sleep.
First, read things in Apple doc.#25801 on sleep settings.
Here is Apple doc.#303698 with their tips.
Mine follow;
USB devices and hubs often cause Macs to not sleep or wake quickly from sleep (notably HP printers and scanners, HP all in ones, and Cannon scanners). Disconnect all USB except for keyboard and mouse and try. If it sleeps, add one back at a time testing after each one to find the culprit.
If you've set your Mac to recieve faxes, it may not be able to sleep. It might also have a damaged preferences file.
If you use your Mac for faxing, open System Preferences. click Print & Fax, click the Faxing tab, and uncheck the Recieve Faxes On This Computer box.
If that does'nt work or you've never faxed on your Mac, go to Finder/Hard Drive /Library/Preferences/SystemConfiguration and delete the com.apple.PowerManagement.plist and com..apple.AutoWake.plist files (if your Mac asks, type your admin. password).
If the latter file isn't present in the folder, go to user name(probably your name)/Library/Preferences, delete the com.apple.systemuiserver.plist file, and reboot your Mac.
Hope this helps!
P.S. One member here reported this (Michael Gleason);
"I have had this problem with my IMac G5. It is surprisingly irritating. LaCie's Silverkeeper backup software was the cause. By default it gave itself permission to wake up the computer to check if a backup was needed. Do you have this or a similar program installed which has scheduled activities including wake-up permissions as an option?"
Dave Hamilton provided this link, xlr8yourmac.com, to a member, which addresses failure of deep sleep with some users that updated and added new FireWire and USB cards.
tomhorvat adds this; After few days of messing around I found out that I had desktop background (wallpaper) set to change every 1 minute.
After unchecking "Change picture..." in system preferences (under Desktop/Screen saver), my powerbook went to sleep all by itself.
Cheers!
DALE

I have a iPhone 4 that will not stop resetting itself on its own this is my fourth phone and the second to have this problem

I have a iPhone 4 that will not stop resetting itself on its own this is my fourth phone and the second to have this problem. I have AT&T so I need to post here instead of actually being held to get help on a Sunday night. this is a extremely frustrating situation as I count on this phone for business.

Are you restoring your phone from a previous back up? If so there could be a problem within the back up. Try restoring your phone as a new device and then manualy reinstall all apps.

Macbook will not go to sleep on its own since Lion.

I have a macbook running Lion 10.7.5. I also use an external monitor. The macbook will not go to sleep on its own and I think it has something to do with the monitor. Any suggestions?

You can test as to whether this issue has to do with the external monitor. Disconnect the display. If the MacBook now goes to sleep normally, then the issue is with the display. If it does not then the issue is with the MacBook.
Best of luck.

Its not a question i just think that for ios 5 you shoud make facetime its own app

its not a question and i just think you should make facetime its own app for ios 5

You are not addressing Apple here at all.
We are all iphone users like you.

Applet not opening a socket on its own host. Please help.

I have also posted this in JSC2 forum.
My applet is not able to open a socket on its own host.
The applet is being served by a JSP (developed using Sun Creator2) from my laptop behind a DHCP broadband router at (say) 125.238.104.132 at my residence. I have a URL �samsub.no-ip.biz� that redirects port 80 calls to 29080 where my application runs. All required router rules/mapping are done and the JSPs run perfectly fine. In one of the pages, I have inserted an applet inside an escape disabled statictext field as follows:
<applet code="AppClient.class" width=540 height=440></applet>
The applet code and the test server code are shown below for your analysis. Note that, when run on the same machine (at home), the applet works fine. The commented lines will show other failed test. The error reported at the java console was: null pointer at line 56
Could someone help me please. Thanx. MarySam
The applet code
1     import java.util.*;
2     import java.awt.*;
3     import java.applet.*;
4     import java.text.*;
5     import javax.swing.*;
6     import com.sun.java.swing.plaf.windows.*;
7     import java.awt.event.*;
8     import java.net.*;
9
10     public class AppClient extends Applet {
11     JInternalFrame jif;
12     JTextArea jta1, jta2;
13     Socket kkSocket = null;
14
15     public void init() {
16          try {
17               LookAndFeel lf = new WindowsLookAndFeel();
18               UIManager.setLookAndFeel(lf);
19          kkSocket = new Socket("125.238.104.132", 4444);
          //kkSocket = new Socket("samsub.no-ip.biz", 4444);
          //kkSocket = new Socket("125.238.104.132:29080", 4444);
          //kkSocket = new Socket("samsub.no-ip.biz:29080", 4444);
20          }      catch(Exception e) {}
21
22          setLayout(null);
23          setBackground(Color.black);
24          jif = new JInternalFrame();
25          jif.setLocation(20,20);
26          jif.setSize(500,400);
27          Container con1 = jif.getContentPane();
28          con1.setLayout(null);
29
30          jta1 = new JTextArea();
31          JScrollPane jcp1 = new JScrollPane(jta1);
32          jcp1.setBounds(10,10,410,100);
33          con1.add(jcp1);
34
35          jta2 = new JTextArea();
36          JScrollPane jcp2 = new JScrollPane(jta2);
37          jcp2.setBounds(10,115,470,245);
38          con1.add(jcp2);
39
40          JButton jb = new JButton("Go");
41          jb.setBounds(425,10,60,30);
42          jb.addActionListener(this);
43          con1.add(jb);
44
45          JLabel jlb = new JLabel();
46          jlb.setOpaque(true);
47          jlb.setBackground(Color.gray);
48          jlb.setForeground(Color.white);
49          jlb.setBounds(425,50,60,30);
50          con1.add(jlb);
51
52
53          jif.setVisible(true);
54          add(jif);
55          //jta2.setText(getCodeBase().toString());
56          jta2.setText(kkSocket.getInetAddress().toString());
57
58     }
59
60     public void start() {}
61
62     public void stop() {}
63
64
65     }
66
67
The test server Code
1     import java.net.*;
2     import java.io.*;
3
4     public class MyServer {
5     public static void main(String[] args) throws IOException {
6
7     ServerSocket serverSocket = null;
8     try {
9     serverSocket = new ServerSocket(4444);
10     } catch (IOException e) {
11     System.err.println("Could not listen on port: 4444.");
12     System.exit(1);
13     }
14
15     Socket clientSocket = null;
16     try {
17     clientSocket = serverSocket.accept();
18     System.out.println(clientSocket.getInetAddress().toString());
19     } catch (IOException e) {
20     System.err.println("Accept failed.");
21     System.exit(1);
22     }
23
24     clientSocket.close();
25     serverSocket.close();
26     }
27     }
28
29

Hi Guys,
I'm not actually from Mozilla Firefox, but I've had this problem before, and I've solved it with the help from another website.
What you need to do is download a programme called "tdsskiller" from here:
http://www.geekpolice.net/t23369-computer-infected
scroll down the page and you should see a link. (I know the article itself seems irrelevant to your problem, but trust me, the programme they recommend works on this virus too.) It's only 1.3MB or so, so it doesn't take up huge amounts of space either! :)
I can safely say that it is COMPLETELY safe to download this from geekpolice.net, as this website is a free website which helps people with viruses on their computer. If you ever have another problem with anything to do with computers, go and have a look on geekpolice.net, they should have something that might help you.
Before anyone wonders why I am singing its praises so much, no I am not advertising them for any personal gain, but they have helped me get rid of some pretty nasty viruses on my computer before, so I am very grateful to them :)
SO, anyway, after you've downloaded the tdsskiller, you should run it, and it may find some infected files, in which case let it repair them. After rebooting your computer, the annoying opening tab thing should be gone!
I hope this works for anyone who's stuck :) If it doesn't, I'm really sorry, but it has definately worked for me!
Good luck!
Yashmeee :)

Does Webcenter Portal Require Its Own Weblogic Domain

Hello folks, I am trying to install webcenter portal in a HA configuration but I have noticed that whenver I try to run config.sh to extend the HA domain the program errors out with a message about invalid template "CFGFWK-64056 - There is a problem with the template!".
Now whenever I run config.sh and select the option to create new domain the program runs to completion sucesfully.
So my question is if webcenter portal requires its own domain and administration server or if I can install it on a domain that is used for other applications also.
I appreciate your help and thank you in advance.
Andre

it does not require own domain, you can extend with your existing domain also,
try to extend the domain from start>webcenter configuration wizard,

Macbook pro 13 inch early 2011 WILL NOT go to SLEEP on ITS OWN.

I am able to close the lid to have it sleep, and manually click the apple>Sleep button to get it to sleep, but with the Energy Saver preferences set for it to sleep at 1 minute it will not allow it to sleep. The display will turn off, but the Light doesn't start blinking dimly. Is anyone else having this similiar Problem? I've deleted preferences .plist files etc to try and remove any possible bad seetings but I think it may be related to this error here. I don't know if this problem is via a Firmware update or bad hardware.
I have noticed when I open up preferences for "Energy Saver" the "Console" gives me this error immediately.
(LINE FROM MY LOG)
Dec 25 22:00:12 new-host-7 System Preferences[457]: **** ERROR: *** -[ESGraphicsOptionsController _coreGetGraphicsStateForSelector:]: AGCGetMuxState() failed

Have you reset the SMC? If not, try that.
Intel-based Macs: Resetting the System Management Controller (SMC)
If you've done that, and it didn't help, then launch the Terminal application by entering the first few letters of its name into a Spotlight search. Copy or drag -- do not type -- the line below into the Terminal window, then press return:
pmset -g
Post any lines of output that appear below what you entered -- the text, please, not a screenshot. Then repeat with the following line:
pmset -g assertion

X220i battery not working, starting up on its own

Background: I've had my x220i for a bit over 2 years and never had a problem with it. Suddenly a couple of weeks ago it completely died for no reason. It was fine one day, and the next morning when I tried to wake it from sleep state, the screen went on but was frozen. Nothing changed that, including long-pressing the power button, so I removed the battery and that turned off the screen. Then it wouldn't turn back on again no matter what I did (I tried things I found online, including removing the battery and pressing the power button 11 times, which has apparently worked for a lot of other people). I took it to get repaired, and they replaced the motherboard. When they did that, it was able to start up but the keyboard and battery weren't working. They replaced the keyboard because it's still under warranty, but not the battery.
Battery: The computer identifies the battery and it charges, but when I unplug the laptop it turns itself off and doesn't seem to draw any power from the battery, considering when I turn it back on the battery still says it's fully charged. The battery lasted about 4-5 hours with no charge before all this happened. The repair people said they checked the battery's connections to the laptop and it all seems fine, but I'm not convinced it's not a connection issue. However, I don't know what else to tell them to check. I don't want to order a new battery only to find that that doesn't solve the problem, but I will if there aren't other ideas about what to check.
Startup: When I shut down the computer but keep it plugged in, it's been restarting itself. When it's unplugged, it starts itself as soon as I plug it in. Today when I plugged it in it started itself, but the screen went black before the login page. After a long press of the power button, it went to sleep, and then I pressed the power button again and it went straight to the login screen.
Does anyone have ideas about what could be going on, or what I could have the techs look into further?

Who did you get to repair it?
Is there any activity in Power Manager? When its charging it should tell you the amperage that's going through. Being stuck at 0.0 means a bad mainboard charging circuit but they apparently replaced it.
My question is how old is the battery and what is it's charge cycles?
Owner of: ThinkPad SL510, X131e, X230 (not fond of)
Other systems: MSI GT640, Sony Vaio PCG 709K, Dell Latitude D430,

Why has Apple not addressed the problems with its own software?

Since I seem to have made the fatal mistake of upgrading my lovely iMac to Snow Leopard, most of my iLife 09 products have ceased working. In particular iDVD, where as before on faithful Leopard it did its job 100% it now decides to crash whenever it feels like it, leaving me with a third party application to use. Myself, along with approx 2000 other users have the same problem, so come on Apple, why the problems with your own software?? and why are we still waiting??

Hi hipster36
Welcome to apple discussions. Question for you: Is your mac intel based?
If not, what's the objective in upgrading to Snow Leopard as opposed to continuing to work perfectly within Leopard? What added features were you considering to upgrade to? Are there any benefits in doing this for your own mac (even if it is intel based)?
It's wise to approach all upgrades with caution (meaning always back up your current / working HD).
Frankly, the way I upgrade is to clone my existing hard drive and then boot to the clone. Thereafter, I install the latest upgrade or OS (assuming it works well on the clone). I guess what I'm saying is to never upgrade without backing up and performing a test drive of the latest OS before you opt to alter your main hard drive. One can't assume that the latest and greatest Mac OS will continue to work fine on a mac which didn't first ship with this particular OS.
This latest Mac OS /Snow Leopard is a bold step forward for apple. It's bold step forward in that it excludes all non-intel based macs.
Message was edited by: SDMacuser

After downloading ios 7.2 my iPad mini seems to have a mind of its own. I'm not sure what to do to fix this problem. Can someone please help me.

I updated my iPad mini to ios 7.0.2 couple days ago. Everything was fine until yesterday. I noticed that it seemed to have a mind of its own. It kept opening and closing app. I'm not sure what to don to fix this problem. I've tried restoring my iPad mini but that didn't help. Can someone please help me?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Im trying to update my iphone with ios 5 but, for some reason its not giving me the option to do it? i've restored my phone once like it says do on the website and it hasnt done it? what can i do ?

Im trying to update my iphone with ios 5 but, for some reason its not giving me the option to do it? i've restored my phone once like it says do on the website and it hasnt done it? what can i do ?

Are you sure you have a 3GS and not a 3G? The 3G cannot be updated to iOS5. What version are you on now?... Settings > General > About > Version

I have an iPad 2 running iOS 8. The email app is not working. The screen shows empty email box, then closes on its own. I have tried closing the app, turning ipad on and off and reset to no avail. Any other ideas? Thanks.

I Have an iPad 2 running iOS 8. When I open email, the email isn't there. I have tried closing the app, turning off the ipad and resetting the iPad. None of that helps. Any ideas? Thanks.

So the app is opening to a white screen then closing on its own? If you have deleted your email accounts & the app is still crashing then I would try resetting all settings (without deleting data).
Did you reboot the iPad after removing the email accounts? If not, try that first holding the home & sleep/wake buttons simultaneously until the apple logo appears, then release & once booted back up, try opening the mail app again.
The problem may have started because one of your email messages might have been corrupt or had a corrupt attachment. If you can access it from a computer, sign into your email & see if there are any that can't be opened or produce errors opening. If so, delete the offending emails then try adding the account back to the iPad.

Cat4000-IOS not seen as member of its own vtp domain in CM

Similar Messages

Maybe you are looking for