CAT6 and PT60 log search related

Hi all,
I have scheduled CAT6 and PT60 as scheduled back ground jobs.
How do I check the error/processed log for both these Tcodes???

Hi Arun,
If I Am not executing CAT6 as Background job, but forgot to check the "display Log" option on selection screen. Is there any way that I can retrieve the log info about the processed information??
Thanks in Advance

Similar Messages

Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a relat

Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a related point in the video?

take have to take turns
and you have to disable one and enable the other manually

Redo Log and Supplemental Logging related doubts

Hi Friends,
I am studying Supplemental logging in detail. Have read lots of articles and oracle documentation about it and redo logs. But couldnot found answers of some doubts..
Please help me clear it.
Scenario: we have one table with primary key. And we execute an update query on that table which is not using the primary key column in any clause..
Question: In this case, does the redo log entry generated for the changes done by update query contain the primary columns values..?
Question: If we have any table with primary key, do we need to enable the supplemental logging on primary columns of that table? If yes, in which circumstances, do we need to enable it?
Question: If we have to configure stream replication on that table(having primary key), why do we actually need to enable its supplemental logging ( I have read the documentation saying that stream requires some more information so.., but actually what information does it need. Again this question is highly related to the first question.)
Also please suggest any good article/site which provide inside details of redo log and supplemental logging, if you know.
Regards,
Dipali..

1) Assuming you are not updating the primary key column and supplemental logging is not enabled, Oracle doesn't need to log the primary key column to the redo log, just the ROWID.
2) Is rather hard to answer without being tautological. You need to enable supplemental logging if and only if you have some downstream use for additional columns in the redo logs. Streams, and those technologies built on top of Streams, are the most common reason for enabling supplemental logging.
3) If you execute an update statement like
UPDATE some_table
SET some_column = new_value
WHERE primary_key = some_key_value
AND <<other conditions as well>>and look at an update statement that LogMiner builds from the redo logs in the absence of supplemental logging, it would basically be something like
UPDATE some_table
SET some_column = new_value
WHERE rowid = rowid_of_the_row_you_updatedOracle doesn't need to replay the exact SQL statement you issued, (and thus it doesn't have to write the SQL statement to the redo log, it doesn't have to worry if the UPDATE takes a long time to run (otherwise, it would take as long to apply an archived log as it did to generate the log, which would be disasterous in a recovery situation), etc). It just needs to reconstruct the SQL statement from the information in redo, which is just the ROWID and the column(s) that changed.
If you try to run this statement on a different database (via Streams, for example) the ROWIDs on the destination database are likely totally different (since a ROWID is just a physical address of a row on disk). So adding supplemental logging tells Oracle to log the primary key column to redo and allows LogMiner/ Streams/ etc. to reconstruct the statement using the primary key values for the changed rows, which would be the same on both the source and destination databases.
Justin

Relating DPS and DS logs

is there anything common between fwd.log and access.log (other than the timestamp) to relate the log entries from the two files
Thanks

This feature will be available with Directory Server Enterprise Edition 6.0 version of Directory Server and Directory Proxy Server.
Regards,
Ludovic.

HOW TO FIND THE LOG FILES RELATED TO SAP XI

Hi Experts,
I want some information on finding the log files in SAP XI. When the XI picks the file from Source system and a series of process undergoes and finally delivered to the receiver system. I need the log files related to all process since the start of the scenario and untill the end of the scenario.
Thanks in Advance,
Sunil K Shetty

HI,
Please see belo links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8314cb90-0201-0010-f586-9155dba8934d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50#search=%22xi%20archiving%22
http://help.sap.com/saphelp_nw04/helpdata/en/aa/fce73a86e99c77e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/15/01df3a1fd91974e10000000a11402f/content.htm
Regards
Chilla..

I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open.

I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open. Any ideas on how to resolve this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

Start Menu items/shotcuts and Start Menu search ability on multiple workstations

2/13/2014 our IT department began to receive complaints of missing programs. After investigation of a few users we were able to determine that the programs existed but all shortcuts and items from the start menu had been completely removed. In addition the
searching feature of the start menu was not functional. This happened to about 90% of our environment and the catalyst seemed to be Windows updates or at least occurred after the auto reboot initiated by Windows Updates. The only items visible in start
menu were items added after the fact, internet explorer, magnifier, command prompt, and notepad. All other items, folders, and the ability to search installed programs or folders were completely removed. However all programs are present in the program files
folders. THe start menu folder in program data was empty except for the aforementioned items. Additionally properties of start menu had all necessary checks in boxes such as search program files and folders etc. Also show hidden items and folders is enabled
for many users so the items were not hidden but gone. And the biggest kicker of all was after a full domain investigation into the issues we found that the majority of our windows server platforms, primarily 2008, were also affected and system restore is unavailable.
This conflicts with our idea that Windows Updates caused this since our servers get their updates on a manual initiated basis by their admins which we have not performed as of yet for this month. This caused me to begin looking at SCCM SCEP as all systems
have System Center Endpoint Protection and received definition updates. Also accessing different user profiles or even a new profile did not make a difference, issue still present.
Due to the enormous inconvenience we sent out a company wide email asking users to perform system restores to get us in a stable state. A system restore to the day before Windows updates (second Wednesday of every month configured by SCCM SCUP) restored
the start menu items.
On a multitude of machines IT performed troubleshooting and system restores recording the changes removed and added. We then, on a healthy machine, started to apply the windows updates and SCEP (antivirus) definitions 1 by 1 with out success of replicating
the issue. Next we performed a system wide antivirus full scan and did not find any viruses. This is obviously not a system criticle issue bringing us down but is a huge concern for us in IT as it happened company wide and caused a large flux of tickets and
some down time for non-technical users. We most definitely want to know the cause and after several days of investigation and troubleshooting Im turning to the Microsoft community for help.
I know I categorized this as a Windows 7 issue and its affecting windows server 2008, 2003, and 7, but I did not see a forum for all windows platforms. Since the majority of affected users are Windows 7 I opened it here.
So to summarize in a bulleted format:
Issue: Wide spread issue affecting around 60-70 users and servers, all profiles, were all start menu items save one or two system defaults were removed. Additionally the searching feature for the start menu looks to be broken as programs
exist in program files and are unsearchable from start menu. IT was also affected and I remain affected until I find the cause.
Investigation and Troubleshooting:
Start menu properties: nothing has changed and search options are enabled.
Missing items are not hidden, hiding and unhiding does nothing and folder options show hidden files is checked.
Program data start menu location is indeed empty as well as user app data start menu location
No group policy's are in place altering start menu items and no group policy changes were made as of recent
No SCCM packages pushed company wide in last month or pushed individually
Windows Updates occurred on windows 7 machines only before the issue occurred and computers restarted and the issue surfaced
System Center Endpoint Protection Antivirus updates and definitions deployed just before the occurrence with windows updates. SCEP def updates happen on all windows boxes to include servers
Paint.exe was completely missing from system32 folder for some users machines to include my own
System restore to that morning before restarts or previous day fixes the issue for windows 7 users
No windows updates were initiated on any servers
Servers were also affected with windows 7 machines
About half the users affected had corrupt Microsoft Office 2013 Pro Plus Click to Run installations and for some the system restore did not fix this and we had to re-install office for around 10 users
SCEP antivirus did not catch any viruses that could cause this, I performed MBAM scans on a handful of machines and didn't find anything either.
Re-creating start menu shortcuts works
Happened to two of our companies locations NH and MA, all part of the same domain but different LANS of course. Companies are interconnected by MPLS connection.
I combed through SCCM to see if anything deployed and found nothing. Currently I have SCUP updates and SCEP updates disabled. I will post a list of Windows Updates that occurred when the issue occurred as well as the SCEP updates. I have read all the threads
about this types of issues and tried all steps without success. Googling the issue also did not rear results.
MichaelSpaulding

Hi,
I would like to suggest you try these steps to figure out what could be causing this problem.
1. Run Troubleshooter
Open the Search and Indexing troubleshooter
http://windows.microsoft.com/en-US/windows7/Open-the-Search-and-Indexing-troubleshooter
2. Create a new library and include fewer folders for test purpose. Now search for a file from that folder. See if it works.
Create a new library
http://windows.microsoft.com/en-US/windows7/Create-a-new-library
3. Try to rebuild search indexing. Refer the steps from the following article.
http://windows.microsoft.com/en-US/windows7/Change-advanced-indexing-options
Also you may use the System File Checker tool (SFC.exe) to check the issue. The sfc /scannow command scans all protected system files and replaces incorrect versions with correct Microsoft versions.
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
http://support.microsoft.com/kb/929833
In addition, you may refer to the following Microsoft TechNet article for the Windows Search related Group Policies.
Group Policy for Windows Search
http://technet.microsoft.com/en-us/library/cc732491(WS.10).aspx
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

When accessing eBay with Firefox and launching a search, I get less results/hits with Firefox then when using Internet Explorer, why? Try it, you'll see.

For example access eBay with Firefox and launch a search on the word Frankenstein: you'll get something like 23,671 results (if you search in ''All categories''). Then quit the Firefox browser and load Microsoft Internet Explorer instead; access eBay again and repeat the very same search: this time you'll get 25,383 results. These are reral figures that I tried at 19:21 on March 20, 2014. Why does a search on eBay through Firefox report less hits than the very same search through Internet Explorer? Using Firefox rather than Microsoft Internet Explorer automatically means missing hits/results/items on eBay: that doesn't make sense but it does happen. Why is it so? Thank you, somebody, for shedding light on this problem.

Try this steps and try to load the same once again!!!
Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

Transaction log and access log

The transaction log (TransactionLogFilePrefix) and the access log are stored
relative to the directory where the server is started rather than where it
resides as with the rest of the log files. Why is this?
Eg.
I start the server with a batch file contained in
projects\bat
My server is in
projects\server\config\myDomain
When I start the server the access and transaction logs end up in
projects\bat
while all the rest of the log files (such as the domain and server log) end
up in
projects\server
My batch file that starts the server looks like this
"%JAVA_HOME%\bin\java" -hotspot -ms64m -mx64m -classpath %CLASSPATH%
"-Dbea.home=e:\bea"
"-Djava.security.policy==i:\projects\server\config\myDomain\weblogic.policy"
"-Dweblogic.Domain=myDomain" "-Dweblogic.Name=adminServer"
"-Dweblogic.RootDirectory=i:/projects/server"
"-Dweblogic.management.password=weblogic" weblogic.Server
Thanks for help on this,
Myles

The same case with me, I sent email to apple support, but got not reply.
The apple status page indicated that every thing is fine now, what a joke.
Many devs are in this situation too, I guess we could do nothing but waiting for their system to come up.

When typing in a website after opening in a tab, the cursor focuses to the address bar and makes logging to things difficult, how do I change this?

As stated in the question on any website I open regardless of whether it is a new tab or just a new destination, the cursor focuses on the address bar and makes logging in to sites very infuriating. Any help is much appreciated.

Thanks for the help, it didn't help with this particular problem. I figured it out though, I had an issue with the AVG safe search. I had to just delete the file in the program files x86.

[svn:bz-trunk] 14330: BLZ-476 : Getting different error message in server' s servlet log and console log when class is not of expected type.

Revision: 14330
Revision: 14330
Author:   [email protected]
Date:     2010-02-22 10:03:03 -0800 (Mon, 22 Feb 2010)
Log Message:
BLZ-476 : Getting different error message in server's servlet log and console log when class is not of expected type.
QA: no
Doc: no
checkin test : pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-476
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java

Hi, wbracken ,
As known, there are 2 different questions I raised.
Regarding the reply for the second one (Nothing to do with Chinese), I noticed there are several similar issues found in this forum, and it seems no response could solve my that problem. The related methods and classes were also well check, as well as the parameters put.
Any way, your reponse was appreciated.
Thank you for the help.

[svn:bz-trunk] 14341: BLZ-476 : Getting different error message in server' s servlet log and console log when class is not of expected type.

Revision: 14341
Revision: 14341
Author:   [email protected]
Date:     2010-02-22 13:19:46 -0800 (Mon, 22 Feb 2010)
Log Message:
BLZ-476 : Getting different error message in server's servlet log and console log when class is not of expected type.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-476
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java
    blazeds/trunk/modules/core/src/flex/messaging/util/ClassUtil.java

Hi, wbracken ,
As known, there are 2 different questions I raised.
Regarding the reply for the second one (Nothing to do with Chinese), I noticed there are several similar issues found in this forum, and it seems no response could solve my that problem. The related methods and classes were also well check, as well as the parameters put.
Any way, your reponse was appreciated.
Thank you for the help.

HRP1000 and HRP1001 log changes

hi I am not able to see HRP1000 and HRP1001 log changes in CDHDR and CDPOS. The HR_IT1000 and HR_IT1001 are active in the system.

Hi,
the change documents can be activated after implementation of note 979104 and setting the related switch as described.
Best regards,
Malgorzata Herzog

Where can I find Installer and uninstaller log files in JSE 6?

Where can I find Installer and uninstaller log files in JSE 6?

For the installer log file, search for Sun_Java_Studio_Enterprise_6_2004Q1_install, or some portion of that.
To find Java ES component product log files, search on Sun_ONE.
You can also search for the timestamp that is part of each log file name. It is of the format MMddhhmm (Month/day/hour/minute)
Refer also to the Troubleshooting chapter of the Installation Guide for additional details on reports and log files used by Java SE

CAT6 and PT60 log search related

Similar Messages

Maybe you are looking for