Catalog backup folders empty?
I'm recovering from a crashed hard drive. All of my image files are restored and in place, now I've reinstalled Lightroom 3. The problem is that when I go to my catalog backup folders, they are all empty. There are dozens of folders that look like backups from different dates, but each and every one of them is empty. How is that possible and is there any way that there could be a backed up catalog anywhere else? Thanks for any help!
You probably want the Lightroom user forums, not the Lightroom SDK forums.
Similar Messages
-
Trash unable to empty with TM backup folders inside
I drug the backup folders to the trash can and went to empty the trash, the progress window pops up and tells me i have 16 items preparing to empty.... but it stays like that forever. Am I missing something or can you not delete the folders through the trash?
you should generally NOT try to delete TM files like that. Drag them back to where they were, then go back in 'time', select the 'action' button (looks like a gear), and click "delete backup".
Good luck! -
Consolidating catalogs & backups
I gather by reading some of the posts in this forum that should be possible to merge old catalogs, into one new one as to consolidate picture locations into one.
If this is correct can I do the following without problems. I have Version 11 waiting to install. I have reorganized my PC & have some old catalogs,sometimes on different drives,as well as possible some stray pictures on them as well.
I was thinking of installing the new software & create a new catalog from scratch. I could then refer setup to the most recent version 10 catalog & have it import & upgrade it to 11. Once this done I could refer the program to older catalogs, & import them one at a time.
Can one if necessary restore a backup in lieu of a catalogue as well if necessary? If the program can update from these catalogs & backups as well will it create duplicates or just refer to the pictures being in the catalog already?
Can the program then do a search to find any other pictures that aren't in any catalog & add them in as well?
If I then end up with one consolidated catalogue that contains all pictures everywhere I think that a new backup might be in order. Any catalogue created this way would still result with pictures scattered across drives? I have lots of space available so backups aren't a problem. Do I move all files onto one drive first or would it be better to do so from the consolidated catalog & then move all pictures to one location?
Thanks in advanceFrom what you have written in other posts, I suppose you practically did not use tagging or other organization features like albums or stacks ?
If that is the case, in my opinion, you don't need to bother with old catalogs or backups. Your migration should be able to :
1 - create a new catalog in the PSE11 format from your current main catalog : it's the conversion process which does not change anything to your present older PSE version. No picture files are copied or moved, only a new different catalog is created. You keep both PSE versions and both catalog versions.
2 - import all pictures not included in your present catalog, even if they are on different drives.
Can the program then do a search to find any other pictures that aren't in any catalog & add them in as well?
Yes, of course. With the current catalog active, you use the menu 'get files from files or folders'. You can get files from external drives (USB, CD, DVDs...) You have the choice to do so in PSE11 after the conversion, or before in your previous PSE version.
If I then end up with one consolidated catalogue that contains all pictures everywhere I think that a new backup might be in order. Any catalogue created this way would still result with pictures scattered across drives? I have lots of space available so backups aren't a problem. Do I move all files onto one drive first or would it be better to do so from the consolidated catalog & then move all pictures to one location?
Absolutely : do a backup when the catalog is up to date.
You can move pictures to a single drive before or after the above job provided you move your folders from the organizer in folder view. Since the PSE11 interface has been changed a lot, you should be more at ease by doing so before the above conversion process.
The additional advantage of a full backup is that you can restore it easily to another computer or drive. If you choose the option to restore to 'custom' location, stating a master folder, various drives will be copied as new folders in the new drive. In that case, you don't need to move the files from the external drive. The restore puts them on the destination drive, with different drives showing as different folder trees. -
Converting from Elements 5 to 9, one catalog, many folders
I am getting ready to convert from version 5 to v9. i have made a complete catalog backup to external drive. Over the years with 3 different users of the system we have unfortunately managed to place pictures in many various folder locations. Is there an easy way to get those under one folder location? If i move a folder it will obviously show a broken link and then i must reconnect the picture in the catalog which could take may hours or days of tedious work if i move lots of folders with lots of pictures. I have my pictures in elements grouped like i want to by tags and catagories but would like to have organized in a single folder structure.
Also, during the conversion from 5 to 9 when it asks about converting catalogs will i have any issues with the folders spread out all over the place? I shouldn't if they are all in the same catalog, correct?
thanks for anyones help.Here are the best advice for moving catalogs :
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Move_your_photos_1
and :
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Move_your_photos
The principle is quite straightforward : you do a full backup of your catalog from PSE5 organizer on an external disk and you use PSE9 to restore it. PSE9 should prompt you to convert the catalog : you do. It will then create a copy of the catalog folder (the one containing the database) in its own format.
My suggestion is not to choose the same location for restore, due to differences in the Windows versions folder structure. Rather create a new top photo folder, for instance 'My pictures new' and check the option to keep the folder structure as also advised in the links above. The resulting structure may look a bit strange, but you won't have to reconnect missing files due to Windows variations in folder naming and structure.
If you start with a clean catalog, after a search for missing files, checking for errors and optimizing, everything should go well.
Remember though that you will get back your catalog and pictures, but you'll perhaps have to reinstall actions and plugins you may have in PSE5. This can be done on a case by case method. -
When I open LR, a dialog box pops up saying that I have requested catalog backups each time LR is run. As a result, when I go to the HD where I have the backup directory, it shows multiple LR catalogs in folders on the dates I opened up LR. Are these all the same? Can I throw out all previous folders, other than the most recent? One instructor I had said that I should only have one ".lrcat", not multiple ones. I am using LR 1.4.1 with Mac OS 10.4.11. Thanks.
Requesting a catalog backup every time Lr starts is likely excessive. It depends on how much activity you perform. Once a day or once a week might be fine for many.
However, whatever backup frequency you choose, you definitely want to keep several generations of backups. I also backup the "backups" to external drives.
For me any catalog backup older than 3 months can be deleted.
(And in this age of "information overload" the best instructor is often the one staring back at you when looking in the mirror.) -
Recovering from lightroom catalog backup
Hi,
For the past 2 months i have been using lightroom.
I used to store my original photos in E dirve(E:) and import in lightroom for processing. Unfourtanetly a week back my hard-disk crashed and i am not able to recover any files other than C Drive(C:).
Luckily had installed lightroom in C Drive(C:) only.
And i think i should be recover lightroom folders in too.
Is it possible to recover any of the photographs from the lightroom metadata stored in the lightroom folders in C:. I read in some websites about catalog backup. Would it be possible to recover from that, i never explicitly created a catalog i used to directly import to lightroom?
Kindly help me!. I would really appreciate that.
Thanks,
SridharIf you imported the files from your E drive and chose to store them on your C drive by choosing a folder on your C drive in the Import Photos dialog, "Copy to:," you will find your images on your C drive in the folder you chose. Go to the Import dialog and look under "Copy to:" Lightroom displays the last place you copied files to. If you chose "Add Photos without moving," the photos are not on your C drive. However, you may be able to recover the photos on your crashed E drive using data recovery software.
When you import your photos, Lighroom creates previews which are still available, but Lightroom cannot process the photos without an actual copy of the photo to work with.
I suggest using the Backup to feature of Import Photos, backing up those originals to DVD, and backing up processed photos on portable hard disks. It is a good idea to have off-site backups also. -
How to merge LR catalog 4.4 (empty) with v3 catalog with many 1000 photos
I had to reinstall an OS in my computer due to a virus. As a result LR 3 in no longer installed. I still have the catalog on a backup disk and have just installed and updated to LR 4.4. What is the best way to merge the V3 catalog with V4 and are there any things I should expect or look out for?
If the LR4 catalog is really empty, then you don't need to do a merge. In LR4, select File->Open Catalog and point to the old LR3 catalog, it will be converted to a LR4 catalog.
-
How can I delete an infected file from backup folders
ran Sophos anti-virus recently and it told me I have a malicious trojan on my Mac, Mal/PDFEx-H (which supposedly only affects windows, but it turned up anyway.) Sophos couldn't remove it automatically, so I was instructed to do a manual removal; however, every time I try to delete the file from the backup folders in which it is located, I get a message that "backup files can't be altered."
so, my question is: how do I get rid of some malicious trojan (even though it's only for windows) from my backup folders? Btw, the backup folders in which it is located are all over 2 years old...don't know if that makes any difference, like maybe the entire folders could be deleted without any adverse effects?
thanks for any advice.E. Kennedy wrote:
thanks for the help!
just wondering why you said that about Sophos? it's a download from Apple's web site and it did catch this, even though it couldn't remove it...
thanks, again!
I think that Linc means (and I concur) you don't need it to protect your Mac and it wastes resources, if it makes you feel better because it alerts you to windows viruses then remove it and install ClamAX or AV or whetever it's called.
But you don't need AV software. -
The DB version is 11.1.0.7.
The "CATALOG START WITH" not only catalog backup set that are not in the RMAN catalog, but also catalog a second copy for files that are already in the catalog.
Files are not a second copy; they are the same file in the same directory.
Having two copies in the catalog, through an error when deleting explicitly the backups.
We have to add the force clause to avoid the error.
RMAN> delete FORCE backup tag 'offsite-1';
The force clause ignores any I/O error.
The delete is part of our scheduled offsite backup script, which returns a false positive error when the force clause is ommited.
I don't want the force clause, in order to be notify if the backup set that are expected to be on disk are no more there, e.g., if someone had deleted files manually at the OS level bypassing rman.
Is there a way to only catalog backup set not in the catalog?
or May be remove the copy #2 entry from the catalog?
Find bellow a test case example:
RMAN> list backup summary TAG 'OFFSITE-1';
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
12 B F A DISK 11-JUN-13 09:41:45 1 1 NO OFFSITE-1
13 B F A DISK 11-JUN-13 09:43:31 1 1 NO OFFSITE-1
14 B A A DISK 11-JUN-13 09:43:33 1 1 NO OFFSITE-1
15 B F A DISK 11-JUN-13 09:43:34 1 1 NO OFFSITE-1
RMAN> CATALOG START WITH 'C:\backups\offsite_disk\IBISdatabase\scheduled_offsite';
searching for all files that match the pattern C:\backups\offsite_disk\IBISdatabase\scheduled_offsite
cataloging done
List of Cataloged Files
=======================
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\06OBTJEP_1_1
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\07OBTJI3_1_1
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\08OBTJI5_1_1
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\09OBTJI6_1_1
RMAN> list backup summary TAG 'OFFSITE-1';
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
12 B F A DISK 11-JUN-13 09:41:45 1 2 NO OFFSITE-1
13 B F A DISK 11-JUN-13 09:43:31 1 2 NO OFFSITE-1
14 B A A DISK 11-JUN-13 09:43:33 1 2 NO OFFSITE-1
15 B F A DISK 11-JUN-13 09:43:34 1 2 NO OFFSITE-1
RMAN> DELETE BACKUP TAG 'OFFSITE-1';
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
24 18 1 1 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1 <<--- same file
30 18 1 2 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1 <<--- same file
25 19 1 1 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1
31 19 1 2 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1
26 20 1 1 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1
32 20 1 2 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1
27 21 1 1 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1
33 21 1 2 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1 RECID=24 STAMP=821470356
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1 RECID=25 STAMP=821470356
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1 RECID=26 STAMP=821470356
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1 RECID=27 STAMP=821470357
Deleted 6 objects
RMAN-06207: WARNING: 4 objects could not be deleted for DISK channel(s) due
RMAN-06208: to mismatched status. Use CROSSCHECK command to fix status
RMAN-06210: List of Mismatched objects
RMAN-06211: ==========================
RMAN-06212: Object Type Filename/Handle
RMAN-06213: --------------- ---------------------------------------------------
RMAN-06214: Backup Piece C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1
RMAN-06214: Backup Piece C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1
RMAN-06214: Backup Piece C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1
RMAN-06214: Backup Piece C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1Hi JM,
Your demo with Oracle 10.2.0.5
At line 36 you answered "No" to "Do you really want to catalog the above files (enter YES or NO)?".
Just repeate your demo and answer Yes.
Even if he might have replied with "YES" then also, the RMAN search for the files which it can recognize as a valid rman backup file. Else it would show the list of files which are not recognized by RMAN as a valid file.
RMAN> catalog start with '/home/oracle/scripts';
using target database control file instead of recovery catalog
searching for all files that match the pattern /home/oracle/scripts
List of Files Unknown to the Database
=====================================
File Name: /home/oracle/scripts/RMAN_BACKUP.sh
File Name: /home/oracle/scripts/rman_clone.log
File Name: /home/oracle/scripts/Db_Refresh.sh
File Name: /home/oracle/scripts/rman_erp.scr
File Name: /home/oracle/scripts/RMAN_14FEB.log
File Name: /home/oracle/scripts/nid.sh
File Name: /home/oracle/scripts/Full_Clone.sh
File Name: /home/oracle/scripts/rman_staging.scr
Do you really want to catalog the above files (enter YES or NO)? yes
cataloging files...
no files cataloged
List of Files Which Where Not Cataloged
=======================================
File Name: /home/oracle/scripts/RMAN_BACKUP.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/rman_clone.log
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/Db_Refresh.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/rman_erp.scr
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/RMAN_14FEB.log
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/nid.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/Full_Clone.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/rman_staging.scr
RMAN-07517: Reason: The file header is corrupted
About the RMAN catalog, it will not catalog the same file twice. It will only catalog the files which are not known to the database.
See this demo. (/backup/RMAN/STAGING/ is the location where all the backup pieces are.)
RMAN> catalog start with '/backup/RMAN/STAGING/';
searching for all files that match the pattern /backup/RMAN/STAGING/
no files found to be unknown to the database
This was the location based test, Another demo showing piece by piece catalogging .
RMAN> list backuppiece '/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00';
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
1323 1321 1 1 AVAILABLE DISK /backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00
RMAN> catalog backuppiece '/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00';
cataloged backup piece
backup piece handle=/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00 RECID=1324 STAMP=821717283
RMAN> list backuppiece '/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00';
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
1324 1321 1 1 AVAILABLE DISK /backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00
Hope its understandable, if any query please revert.
Happy to Help.
Thanks and Regards,
Prashant -
Had pse 8 on a Windows 7 PC with a catalog backup on an external drive. Now have a Mac with OS Mavericks. If install pse 12 or Lightroom on the Mac will I be able to use the old catalog backup or must I start from scratch.
If you made a full catalog backup using the organizer's backup command, and you did it to a removable drive, yes, you can restore it to the mac. A backup made on discs will not work, though.
-
How can I view the backup folders in "text format" does anyone know the software I would have to have to do this?
Here's one:
http://www.iphonebackupextractor.com/ -
OK to CTRL-ALT-DEL a stuck catalog backup?
All,
On my Win7 64bit laptop LR 3.2 got stuck during a catalog backup. Exited LR and was reminded it was time for a regular catalog backup. Started backup with a click. a little later the laptop went to sleep (hasn't been a problem before) and when I woke it up there was a green progress bar nearly "done" in a Progress box subtitled "Optimizing Previews catalog". There was no progree for 10 minutes, maybe 20, so I clicked "Cancel" but there was no change in either thebar or anything else except the button I clicked for Cancel changed to say "Cancelling...". During all this the green bar graphic pulses as I guess it is supposed to. I closed everything else. This is a 4Gig machine.
Nothing has changed for a couple of hours.
I see only one process in the process manager that is labeled Lightroom: the whole program.
Think I can nuke it without damage? If it's damaged what is the best way to return the catalog to health?
Thanks, in advance, for any suggestions.
jonathan7007Yes, happens sometimes to me, too.
Particularly when I have opened and closed LR several times without backing up.
When it gets stuck up, hit the <Enter> key and a dialog will come up saying that the backup could not be completed and if you want to retry or close without backup. Usually the backup works on the second try.
WW -
We are currently running Oracle 10.2.0.4 and IBM TSM to do our backups, but we moved to a new machine and some of our older backups are sitting on tape in TSM and i need to manually catalog these pieces, I logged a SR with Oracle and they sent me the following response
+"There is an undocumented command that allows catalog backuppiece from tape,+
+catalog device type 'SBT_TAPE' backuppiece '<name>';+
+You need first configure an sbt_tape device and then you can execute the catalog device type sbt_tape+
+command.+
+As and example the following will catalog a backuppiece on netbackup:+
+CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE'+
+PARMS 'ENV=(NB_ORA_CLASS=sv2n2admoraclelogbkup, SBT_LIBRARY=/usr/openv/netbackup/bin/libobk.sl64';+
+catalog device type 'SBT_TAPE' backuppiece 'orig-lij1qaa3_1_1';+
+Note: This command works from 10g. The reason why it is not documented for tape is if the backupset contains more than one piece, then it will take long time to catalog backup piece. As long as there is one backuppiece per backupset, then the undocumented way should work without any issues."+
This solution is for netbackup when i try the following in TSM
RMAN> CONFIGURE CHANNEL DEVICE TYPE 'sbt_tape' parms
'ENV=(TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
RMAN> CATALOG DEVICE TYPE 'SBT_TAPE' BACKUPPIECE 'tiaprd_monthly_rman_7pl75al9_3_1';
I get the following error
allocated channel: ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: sid=1754 devtype=SBT_TAPE
channel ORA_SBT_TAPE_1: Data Protection for Oracle: version 5.3.3.0
allocated channel: ORA_SBT_TAPE_2
channel ORA_SBT_TAPE_2: sid=1699 devtype=SBT_TAPE
channel ORA_SBT_TAPE_2: Data Protection for Oracle: version 5.3.3.0
allocated channel: ORA_SBT_TAPE_3
channel ORA_SBT_TAPE_3: sid=1625 devtype=SBT_TAPE
channel ORA_SBT_TAPE_3: Data Protection for Oracle: version 5.3.3.0
allocated channel: ORA_SBT_TAPE_4
channel ORA_SBT_TAPE_4: sid=1987 devtype=SBT_TAPE
channel ORA_SBT_TAPE_4: Data Protection for Oracle: version 5.3.3.0
ORA-19870: error reading backup piece tiaprd_monthly_rman_7pl75al9_3_1
ORA-19507: failed to retrieve sequential file, handle="tiaprd_monthly_rman_7pl75al9_3_1", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
ANS1302E (RC2) No objects on server match query
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of catalog command at 05/05/2010 11:37:18
RMAN-06209: List of failed objects
RMAN-06211: ==========================
RMAN-06212: Object Type Filename/Handle
RMAN-06213: --------------- ---------------------------------------------------
RMAN-06214: Backup Piece tiaprd_monthly_rman_7pl75al9_3_1
RMAN> exit
As you can see it fails but if i specify a wildcard "tiaprd_monthly_rman*" it works anybody please help
Regards
GrantHi Grant,
As you can see it fails but if i specify a wildcard "tiaprd_monthly_rman*" it works anybody please help.It isn´t an undocumented feature without a reason.
Why not just use the wild card option anyway saves you a lot of time keying in unique tag names?
Regards,
Tycho -
Catalog backup can not be performed
The backup of my catalog aborts with an error!
LR says that it could not back up the catalog.
Folder permissions and sufficient disk space is available.
Until a few days, everything was still working.
Even if I create a new catalog I get in the catalog backup, the error message
Who can help?I have changed the destination to a different folder. Unfortunately, the same problem
Dirk -
IPad & iPhone Hotmail Folders Empty
iPhone & iPad folders empty
Sometime recently, perhaps after updating my iPhone and iPad to iOS 6, I noticed mail is missing from many of my HotMail folders on those devices. My account is set up as an Exchange account. I have since deleted it from my iPad and added it back as a new Exchange account. My Inbox repopulated with a small number of existing emails, but just a few of the 100 plus emails that are accessible via a web browser on my desktop computer. Likewise for my Sent mail and Trash. None of the folders I created on my own populated on my iPad of iPhone with the emails that are in them and which are accessible via desktop and web browser.
If I send a new email message to my account, then after it arrives I move it using my desktop to one of the folders I created, it shows up just fine. In other words, there doesn't seem to be any problem with new emails, just earlier, preexisting emails. I tried using my desktop to move emails from one folder to another to see if they would then populate on my iPad, but that didn't help. I tried marking them as unread. That didn't help either.
I cannot find a way to make preexisting emails show up in the folders on my iPad or iPhone.
Has anybody encountered this before? Is this a known bug? More importantly, is there a fix or a workaround?
Thanks.Thank you.
I found the answer. It was operator failure, my fault. In the settings on my iPhone and iPad there is a setting called Mail Days to Sync. I had this set to a short duration. When I changed it to No Limit, all the older mail was properly populated into their respective folders.
Maybe you are looking for
-
Is it possible to create a mpeg-2 file from a video after being processed with Premiere Pro CS3 ???? In Export -> Movie -> Settings I don't find the option to export to this format. Does it depends on the codecs installed on the computer or Premiere
-
Difference of output from cron job & shell prompt
We have a script in production like: sqlplus -s <username>/<password><<EOF set head off set feedback off set numwidth 4 set serveroutput off spool /tmp/test1.txt prompt column1 , column2 select column1||' , '|| column2 from <table> where <condition>;
-
Extension wise document search in KM
Document extension wise, Can we calculate the number of Documents in KM repository (Ex :- .excel,.doc,.ppt) ? Regards, Devesh
-
Same info on 2 unlinked phones.
My daughters new iPhone 5c some how has some of my info from my iPhone 6 plus. We have different iCloud accounts and different Apple id's. We use the same computer to sync and back up to. What can I do to fix this? We both have the newest itunes and
-
Adding a channel logo/watermark - really pixelated??
Hi, I've been trying to add out logo to the bottom corner of our video and everything i try doesn't come out really sharp its all pixaleted, i've tried .psd .png whats the best way to do this?? and get a nice sharp picture/logo Thanks