Catalog Content Management in Plant Maintenance

Hi,
We are working on Plant Maintenance Component Scenario. The current scenario of Component planning is that we create PM order in backend.We add the components from the Catalogs in SRM Frontend.
My question is that possible to bring the catalog ICON in PM Order in backend or is that possible to add components from catalog in the backend.
Regards
Lovkesh

I hope, for the below points there is no separate configuration.
1) Set List Processing for Fleet management objects.
2) Set reference object screen for Vehicles.
For 3) Consumption Relevant Counter reading Update.
IMG => PM & CS => Information systems for PM & CS => Configure Measurement document update
I hope, this is common for all the versions. Please check.

Similar Messages

  • SRM - Catalog Content Management

    Hi SRM Masters
    Can any one could send me the config documentaion for SRM Catalog Content Management document and functionality(other than SRM260 and SRM270 both I have).
    and also SUS config documents and functionality.
    Regards
    Rajesh

    Hi,
    Check these links....
    http://www.sap.com/usa/solutions/businesssuite/srm/pdf/BWP_SID_Catalog_Content_Mgmt.pdf
    http://www.jhu.edu/hopkinsone/documents/SRMCatalogandContentManager_000.pdf
    Reward points if useful....
    Regards
    AK

  • What are the steps to configure Fund Management in Plant Maintenance

    Hi Friends,
    while creating Plant Maintenance order through T code iw31.
    In the main menu     Go to-Assisments----Fund management.
    now this Fund management is in grey mode.
    What are the steps i need to carry to make it active mode.
    Please suggest
    Thanks in advance

    Dear
    Ask with your Co person either they activated fund mgt. This is thier Job u can activate your order types for commitmente check at KOAB.
    Ask them to look at SPRO--PUBLIC SECTOR MGT
    Also at SPRO-CONTROLLING-INTERNAL ORDERS-BUDGET AND AVAILABLITY CONTROL
    You also check at your OIOA.
    thenna

  • Re: Fleet management in Plant Maintenance

    Hi Guru's
    Here i have an issue reg the configuration screens in PM
    In SAP-SPRO---Plant maintenance and Costumer Services, I am not able to find the Screens required for  configuration for FLEET MANAGEMENT i e.,
    1) Set List Processing for Fleet management objects.
    2) Set reference object screen for Vehicles.
    3) Consumption Relevant Counter reading Update. 
    These are mandatory for capturing the cost of the fuel into reports of  Vehicle analysis report.
    Please any one can Send me whether we need go for any Patches or to update any notes.
    Present  i am using ECC-6 EHP-5
    Please reply back ,it is very urgent.
    Regards
    Kumar

    I hope, for the below points there is no separate configuration.
    1) Set List Processing for Fleet management objects.
    2) Set reference object screen for Vehicles.
    For 3) Consumption Relevant Counter reading Update.
    IMG => PM & CS => Information systems for PM & CS => Configure Measurement document update
    I hope, this is common for all the versions. Please check.

  • Fund management in plant maintenance module

    Hi.
    can anyone explain how fund management works in plant maintenance module. Actually to say we have implemented FM. We make FM entries in orders in GOTO -> assignment -> Fund Management.
    The question is, when we make entries in PM orders, it creates auto reservation No. for the materials (components) which are added in component tab of order. though in PM order we have made FM entries it is not carried by the system in auto generated reservation no. Plz advice.
    Harish

    Hi,
    Plz find below te error occured in program.
    Program RFFMRP_MAT_RESERVATION does not exist
        Message no. DS017
    Diagnosis
        The program you specified does not exist.
    Procedure
        If are creating a new program, acknowledge the message and continue.
        If you are trying to access an existing program, check the spelling. For
        a list of existing programs, select Utilties -> Find program.
    Can You suggest the alternate answer for the problem.
    Regards,
    Harish.

  • How to upload Master Catalog Schema in Catalog Content Management SRM

    Hi All,
    Please provide the solution as we are in real trouble.
    We have to delete master catalog and upload it again. Deletion is done because the mapping and all are being corrupted. SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog.
    Can all of you guide us what to do:
    1. How to delete a existing Master catalog (can de-publish will do it?)?
    2. We have the master catalog schema with us. Please tell how to upload this schema. Which link we have to follow?
    3. After uploading the master schema how we can check that master catalog is working fine.
    The answers will be rewarded with valuable points
    Regards
    Praveen K Ghosh

    Sridhar,
    I am contacting you regarding the same problem with the CCM MASTER CATALOG, as Praveen said, SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog.
    I have read the documents that you refer to at http://help.sap.com/saphelp_srm50/helpdata/en/7f/9b62405c910272e10000000a155106/frameset.htm.
    In this link I found information really useful, however according to the document the CCM MASTER CATALOG should be created automatically by the SAP Catalog Authoring Tool, this happends the first time that you are using the system.
    Catalog Creation
    You use this function to create catalogs in SAP Catalog Authoring Tool.
    You can create the following types of catalogs:
    Supplier catalogs
    Procurement catalogs
    Model service catalogs
    Note
    SAP Catalog Authoring Tool creates the master catalog, the SRM product catalog, SRM contract catalogs, and the contract catalog for service specifications automatically.
    When SAP Catalog Authoring Tool is used for the first time, you must open the Edit Catalogs application once, before you create any catalogs. Choosing Edit Catalogs triggers the creation of the master catalog. If you do not do this, SAP Catalog Authoring Tool outputs an error message when you try to create a catalog.
    We have already the Master Schema and we know how to map the CCM MASTER CATALOG to the supplier and procurement catalogs. The main problem is that we need to delete the CCM/MASTERCATALOG and created again.
    1. How delete the CCM/MASTERCATALOG?
    In a Test enviroment I have delete the CCM/MASTERCATALOG using the "Edit Catalogs" mode then choosing the catalog and confirm the deletion.
    Once this has been done, all the catalogs has been erased including the CCM/MASTERCATALOG, so now we have the system in blank. I am not sure if this is the correct way to delete the catalog or there is an easiest way where the Procurement and supplier catalogs dont dissapear once the CCM/MASTERCATALOG is deleted.
    2. Once the CCM/MASTERCATAOG is deleted how to created again?
    According to the instructions the SAP Catalog Authoring Tool should created this automatically when is used for the first time, however how we can created the CCM/MASTERCATALOG again if the SAP Catalog Authoring Tool is not used for the fist time.
    Is there a way where the system can create the CCM/MASTERCATALOG for a second time?
    I follow the steps to create the CCM/MASTERCATALOG for the first time however i didnt get a positive result.
    Any help provided will be really appreciated.
    Thanks in advance
    Carlos

  • Catalog content management configurational error

    hai ,
    i configured cat,cse in one client and ebp in other client.while calling search engine from shopping cart the system throws a page like  below one.
    your current session cookies
    session       id     sid:ANON :sapsrm4_qty_00:xbcs......
    cookies       0
    session catalog    info
                               user
                               locale
                               catalog<br>0000000000000000000000
                               views   0
                               schema     00000000000000000000
                               page size   0
                               hook -url
                               catalog target
                               basket target
                               log number
    history                 0
    can anyone please provide the solution.thanks in advance

    Hi,
    Have you correctly defined the call structure? Remember the client to be populated in the call structure should be the client where the CCM catalog resides. Also, the catalog id must match that of the published catalog in the CCM client, maybe paste the call structure in here so we can see how it looks.
    Regards,
    Jason

  • Catalog content managment

    hai,
    could anyone give the configuration steps required to configure ccm.does trex is mandatory in ccm.In srm we have maintianed twpurlsvr likethat does we have maintined any table in ccm?.is there any transaction like sicf in srm.how can we activate the bsp services.can we use srm and ccm in the same server?thanks in advance
    Edited by: swapna992002 on Jun 1, 2009 3:40 AM

    Hi,
    You can download CCM configuration guide from below link.
    https://websmp106.sap-ag.de/ibc-srm
    for this service user ID is required.
    and also see this link for other more about CCM
    http://help.sap.com/saphelp_ccm20/helpdata/en/index.htm
    Thanks,
    Koushik.

  • How to fill up Business Content 2LIS_17_I0NOTIF for Plant Maintenance

    Hi Gurus,
    I'm wondering how do you fill up data for datasource 2LIS_17_I0NOTIF. Because when I look at it in the RSA3 of our ECC6, there's no data available. Is there a setup table I need to activate? Thanks in advance
    - Kit

    Kit,
    When you execute the data source in RSA3, you will get data if that data source have data in setup tables.
    the setup tables for this data source 2LIS_17_I0NOTIF is MC17I00NTFSETUP and this is LO data source.
    follow the below steps
    1) goto LBWE and check whether your data source is active or not.
    2) If not activate it.
    3) goto LBWG( t code to delete setup tables) based on your application component(in your case 17)
    4) goto OLI*BW( in your case * means 17) to fill the setup tables.
    5) goto SE16 --> give the set up table name and check you have data or not.
    now execute the data source in RSA3 --> you will get data.
    check out below thread
    lo extraction step by step
    Regards,
    Venkatesh

  • Catalog content manager doesn't work

    Hi
    We have some problems regarding to the application CCM 1.0. I can't display the BSP pages. This is the error message on the web page sap/bc/bsp/ccm/cat_cdc/cdc_main.do:  <b>Unable to interpret * as a number</b>
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Form: SEARCH of program CL_DML_HEADER=================CP
    Form: SEARCH of program CL_DML_API====================CP
    Function: CME_API_DTYPE_SEARCH of program SAPLCME_API_DTYPE
    Form: SEARCH_DTYPE_CME of program /CCM/CL_CHAR_MANAGER==========CP
    Form: INITIALIZE_DTYPES of program /CCM/CL_CHAR_MANAGER==========CP
    Form: INITIALIZE_CATALOG of program /CCM/CL_CHAR_MANAGER==========CP
    Form: INITIALIZE_CATALOG of program /CCM/CL_CATALOG_MANAGER=======CP
    Form: CREATE_MANAGER_FOR_CREATE of program /CCM/CL_CATALOG_MANAGER=======CP
    Form: CREATE_CATALOG of program /CCM/CL_CATALOG_MODEL=========CP
    Form: CREATE_CATALOG_LIST_MODEL of program /CCM/CL_CATALOG_LIST_MODEL====CP
    In ST22 i have the error: CONVT_NO_NUMBER
    Any good ideas?
    Best regards,
    Morten Gummedal

    Hi Morten / Roberto,
    I have exactly the same error.   I'm implementing SRM Server 5 (SRM 4.0).
    How did you fix this ?
    I would really appreciate your help !
    Thanks and regards from Mexico,
    Diego

  • Which book to buy for Plant maintenance on SAP press...

    Which book to buy from SAP press which book has good amount of configuration details regarding Plant maintenance i found three books if there is some other good book please do let me know
    1.maximize your plant maintenance with sap
    2.sap enterprise asset management
    3.plant maintenance with sap

    Hi Mohammad
    I already posted a query for SAP PM in certification forum , but i couldnt see any active replies.
    SAP PM certification
    I am already SAP SD certified and working on Support sider of Customer Service Module , This Teched Planning to take certification exam for SAP PM maintenance and repair, But i am not getting any source of help as to how do i start with for preparing for the certification and no idea as to what are the topics to be covered and how will be the set of questions , Is there any seperate certification only for SAP CS
    Please do reply on my query and guide me accordinlgy
    Best Regards
    Waseem Mohammad

  • Plant Maintenance and Work Clearance Management

    Where can i find functionality info on Plant Maintenance and Work Clearance Management. How can these functionalities be activated  - is there a switch?

    Please go thr below SAP Help links for Plant Maintenance and Work Clearance Management.
    http://help.sap.com/saphelp_47x200/helpdata/en/2b/1b713896fab752e10000009b38f889/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/2b/1b713896fab752e10000009b38f889/content.htm

  • Catalog Interface (OCI) -  Customizing for Plant Maintenance order  ERP2005

    Hello Experts,
    we want to use the integration between SRM and ERP2005. In the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/5d/0eba5fa0084247acbb0c04cede18e8/frameset.htm">sap documentation</a>sap documentation I found the following:
    'In the Customizing for Plant Maintenance and Customer Service or in the Customizing for Project Systems, you entered the required data about the catalog that you want to connect to the SAP R/3 system. You can find the corresponding IMG activities under Interface for Procurement Using External Catalogs (OCI).'
    However I can`t find this IMG activities in our ERP2005 system.
    What`s wrong?
    Thanks in advance.
    Regards
    U. Wieland

    Hi! Additional we had to generate the img new.
    Unfortunaetly I haven`t a idee how does this work. (Our sap basis did this.)
    Through the assign from catalog to order type, I think it nessary to use the pm-img-activities...
    Plant Maintenance and Customer Service
    ->Maintenance and Service Processing
    ->Maintenacne and Service Oders
    ->Interface for Procurement Using Catalogs (OCI)

  • Managing Catalog Content

    What is Managing Catalog Content?
    Can anybody please explain about this in detail
    Regards
    NK

    Hi
    This is one of the process in Catalog contenet manageemnt like upload,manage and publish and preapre the  master data in ccm.
    http://help.sap.com/saphelp_ccm20/helpdata/en/index.htm
    BR
    Muthu

  • Plant Maintenance Business Content - MTTR and MTBR

    Greetings to all,
    Was wondering whether anyone has any idea which standard (international?) SAP is following, when developing formulas to calculate MTBR (Mean Time Between Repair) and MTTR (Mean Time To Repair) in the Plant Maintenance Business Contents.
    It will be great help, if there is an indication on this!
    Thks!

    Hi,
    Yes, I have seen those notes. But was wondering whether there's a specific international standard that was followed.
    Thks!
    Rgds

Maybe you are looking for

  • Two sided printing HP Officejet 4630

    How to use the two sided printing with the HP Officejst 4630. I see how to use two sided copy.

  • I'm booting from a new LaCie Thunderbolt SSD and it won't wake from sleep.

    As my boot drive I have a new 1TB LaCie Thunderbolt SSD Disk. It's connected to a 27" 2.7 GHz Intel i5 iMac (mid 2011). I'm running OS X 10.8.2. Nothing else is connected on Thunderbolt. Everything runs fine and very fast, with the one exception of n

  • Printing background color - NOT

    I have someone who insists on sending me meeting minutes as email with a background color for the email. I'd like to turn off the background for printing, but can't figure how to do this. If I ask the printer to print B&W I get a grey background. In

  • Applications Not deleting

    I downloaded an application called Plex and then deleted it. Now whenever i restart my computer or log into my account this application always opens first and it is really annoying. Thanks for the help, Is their any way to fully delete this or stop i

  • Error when export application from navigator bar

    hello, i had this error when export one application. Error: ORA-06502: PL/SQL: numeric or value error (WWV-11230) Unexpected error encountered: ORA-06502: PL/SQL: numeric or value error (WWV-15200)