Catalog creation in SPRO vs BBP_CUST_CAT
SRM 4.0
I thought BBP_CUST_CAT was the same transaction as going through SPRO --> Supplier Relationship Management --> SRM Server --> Master Data --> Define External Web Services. However, when comparing the catalogs in BBP_CUST_CAT vs SPRO - SPRO contains all the catalogs and BBP_CUST_CAT is missing some. What controls the visibility of catalogs displaying in bbp_cust_cat? Is there a seperate transaction which will show all catalogs?
Hi,
You could probably create a new parameter transaction (SE93) for the transaction SM34 and skip first screen with view cluster name as WSI_MVC.
Then when you execute this transaction, it will directly open the view cluster.
Rgds,
Prasanna
Similar Messages
-
SRM Contract Catalog - Creation without XI - is that possible?
Hi,
I am working with a customer on SRM 4.0 / CCM 2.0 / Business Connector 4.7 ( standalone scenario ).
We need to have contract catalogs in our system.
So I read the post from Waheed Mohammad with similar request, but the different is, that I don´t have XI and I do not know what the business scenario "MasterDataInclusion" is
Does anybody know, if SRM Contract Catalog Creation works with Business Connector 4.7 too?!
And what settings have to be done?!
Would be glad, if someone could give me a hint.
Thanks and Regards,
J.H.Hello Jason,
thanks, I suspect it !
Do you know if it is possible with Business Connector 4.7 ?!
Best Regards
J.H. -
SRM Contract Catalog - Creation
Hi,
I am working with a customer on SRM 5.5 /CCM 2.0.
We need to have product and contract catalogs in our system.
1) Do we necessarily need to have <b>CCM on another client</b>?
2) We have initialized CCM with the /ccm/ccm_initialize report. After we run the BBP_CCM_TRANSFER_CATALOG report SRM Product Catalog gets created. <b>How does the SRM Contract catalog get created</b>? Is there a separate report for that?
4) <b>Do we necessarily need XI</b> for my scenario?
Any helpful answers would be greatly appreciated. [and rewarded, ofcourse :-)]
Thanks and Regards,
WaheedHi Chris,
Thanks a lot for the reply.
Couple of associated queries.
<i>1) XI configured and the business scenario MasterDataInclusion set up.</i>
Yes, it is set up for us.
<i>2)A logical system entry for CCM defined as a backend system with type Cataloge.</i>
We have CCM on the same client as the SRM EBP. So, we have already defined this client logical system as <b>Local B2B</b>. I cannot define the same logical system again as type CATALOG. So, should I create a dummy entry for this CCM backend system.. without any client assignment that is?
3)We dont have a supplier catalogue scenario. Only Product & Contract Catalogues.
When I executed the BBP_CCM_TRANSFER_CATALOG first time a SRM Product Catalog got created. Is the contract catalogue expected to be created then itslef?
Because, after we release our contracts there is no contract creation/updation happening in the CCM. Is the contract catalogue expectd to be created the first time we release any catalogue with the tick on?
Everytime we release a conract an error log is being generated for a user WF-BATCH with message
"Recepient not found.
The error ocurred by processing event RELEASED_NEWLY with GUID 70D3DB446F7CEC36E10000000A0000E8 and object_id= 5000000213" [5000000213 is our contract number"
Is this relevant to my problem? What is the issue here?
Thanks a lot again for your patience.
Regards,
Waheed -
Costing Variant Creation in spro
Hi,
Please let me know the creation of costing variant in spro.Need configuration steps for it.
Regards,
A.S.kUmARHi there
Please see
Transaction: OKKN
Or
IMG-> Controlling-> Product cost controlling -> product cost planning ->material cost estimate with quantity structure ->define cost variants
You can create your own or copy from an existing costing variant.
Regards
Louise -
Runtime error in Field catalog creation
when i try to create the field catalog using the following code.
am getting *'Field Symbol Is not assigned' Runtime error.*
Please give me idea how to resolve this issue.
data: wa_field type slis_fieldcat_alv,
t_field type slis_t_fieldcat_alv.
LOOP AT t_role INTO wa_role.
wa_field-col_pos = count1.
wa_field-fieldname = wa_role-agr_name.
wa_field-datatype = 'CHAR'.
wa_field-ref_fieldname = 'AGR_NAME'.
wa_field-ref_tabname = 'AGR_1251'.
APPEND wa_field TO t_field.
count1 = count1 + 1.
ENDLOOP.
Suitable Answers rewarded with maximum points....
it's Urgent...
Give me Quick Reply.Error is having following short text.
Field symbol has not yet been assigned.
Error analysis
You attempted to access an unassigned field symbol
(data segment 92).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump.
Please tell me how to correct this error.
It is very Urgent.. -
Catalog creation&configuration
Hi Gurus,
I need to know how to configurate and create catalogs step by step in details in CCM2.0.
If anyone has information about this issue please send me information at [email protected]
Thanks for your help
Regards,
rakhiAs promised, Sent... )
Regards
- Atul -
Need help with Catalog creation
I have a catalog of 500 item I would like to sell over the
web . This catalog is in a PDF format with graphics and text . How
can I get into contribute and add the paypal cart buttons. I am
trying to eliminate the need of recreating the catalog when it is
all already created and shoud be able to convert for use in
contribute. any help would be appreciated . If contribute is not
the product for me let me know that as well. The catalog was
created in illustrator and saved as a PDF file (if this
helps)If you have the source design in Illustrator - you might want
to use Dreamweaver or GoLive instead, so that you can insert your
graphics and text elements using layers and hotslices. Contribute
can then be used to manage your site content. For a simple site
design, you can incorporate existing sample templates in
Contribute, and then add the paypal shopping object to them. Since
you have the graphical mockup in Illustrator this should be two
ways to approach your catalog to web design. -
RMAN ( CATALOG CREATION ) STEP BY STEP by Joel Pérez
Hi everybody
I am a person that answer questions for some forums here. I have seen that a lot of people get trouble to begin to work with RMAN and my purpose with this topic is to guide rookies and everybody that wants to learn a little bit more about usage of RMAN. I go to add the steps day by day. Enjoy it!
Please do not replay in this topic!!!
When I finish this article I am going to give you opportunity to give your opinions about this.
For complete reference for this theme go here:
Recovery Manager Quick Reference Contents / Search / / PDF
Recovery Manager Reference Contents / Search / Index / PDF
Recovery Manager User's Guide Contents / Search / Index / PDF
http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage
Joel Pérez
http://otn.oracle.com/expertsNow, We have to get connection with the target database.
steps:
- Ensure the target database is started. In this case the database that will be the target database is : "LQACNS1"
- Get connect to the target database.
- Get connection to the database where the catalog is.
- Register the database in the catalog
This one of several methods to realize whether the target database is started.
[oracle@ozawa oracle]$ ps -ax|grep ora
16336 ? S 0:26 /opt/ora9/product/9.2/bin/tnslsnr LISTENER -inherit
16342 ? S 0:03 ora_pmon_LQACNS1
16344 ? S 0:39 ora_dbw0_LQACNS1
16346 ? S 2:36 ora_lgwr_LQACNS1
16348 ? S 0:17 ora_ckpt_LQACNS1
16350 ? S 2:21 ora_smon_LQACNS1
16352 ? S 0:00 ora_reco_LQACNS1
16354 ? S 0:04 ora_cjq0_LQACNS1
16356 ? S 8:55 ora_qmn0_LQACNS1
16358 ? S 8:58 ora_qmn1_LQACNS1
16360 ? S 8:53 ora_qmn2_LQACNS1
16362 ? S 9:00 ora_qmn3_LQACNS1
[oracle@ozawa oracle]$ export ORACLE_SID=LQACNS1
[oracle@ozawa oracle]$
[oracle@ozawa oracle]$
[oracle@ozawa oracle]$ sqlplus /nolog
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Mar 1 13:37:59 2004
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> conn / as sysdba
Connected.
SQL>
SQL> select * from dual;
D
X
SQL>
- Working with the target database and the catalog to register the database.
[oracle@ozawa oracle]$ rman target sys@lqacns1
Recovery Manager: Release 9.2.0.1.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
target database Password:
connected to target database: LQACNS1 (DBID=1237456636)
RMAN>
RMAN> connect catalog rman/rman@ldevcard
connected to recovery catalog database
RMAN> register database;
database registered in recovery catalog
starting full resync of recovery catalog
full resync complete
RMAN>
- to start of this moment you can use RMAN to perform beckups of the target database.
Joel Pérez
http://otn.oracle.com/experts -
Hi Joel Pérez,
I accidentally replied on your topic 'RMAN ( CATALOG CREATION ) STEP BY STEP'.So i am very sorry. I need your help.
According to 'Recovery Manager user's Guide' allocation disk space for recovery catalog database are-
SYSTEM tablespace 90 MB
Temp tablespace 5 MB
Rollback or undo tablespace 5 MB
Recovery catalog tablespace 15 MB
Online redo logs 1 MB each (3 groups, each with 2 members)
Is it possible to create system tablespace on 90MB on 9i rel2? Do i need to run the catalog.sql,catproc.sql & other scripts on catalog database?
Please give me a guide line how to create a catalog database.
Arif Md. Eftekhar Rashid.Hi joel
I successfully created catalog database and can backup from there. I have created two database one for my production database and one for catalog. I created those databases using dbca. Catalog database should be as small as possible for the shortage of my storage. So During the createtion of catalog database Should I include the follwing additional feature
Oracle Spatial
Oracle Ultra Search
Oracle Data Mining
Oracle OLAP
Oracle JVM
Oracle interMedia
Oracle Text
XDB Protocols
What is the function of those additional features? Can I eliminate those option during the creation of production database too?
Arif. -
Error connecting to bi bean catalog with jdev
I'm in the process of getting the bibdemo up and running.
Started with oracle 9ir2 and applied the patch set 1 as directed by the bib903 installation instructions. After installtion of bib903 ran catalog creation scripts without any errors. Installed the bibdemo (latest) without any errors as well.
Started up jdeveloper....
While testing my connection to the bi bean catalog I get
an error telling me that the connection was successful but the metadata is not valid and could not be retrieved.
As far as I can tell, everything is valid. I went ahead and copied the jdbc drives from oracle_home/jdbc/* from the database into the jdev/jdbc/home.. Also i removed the olap api 901 jar from the 'available library list'
Neither things seem to make a difference...
TIA...
The stack trace following the error is pasted below
oracle.express.idl.util.OlapiException
oracle.express.idl.ExpressConnectionModule.DatabaseInterface oracle.express.idl.ExpressConnectionModule.ConnectionInterfaceStub.getDefaultDatabase()
ConnectionInterfaceStub.java:1465
void oracle.express.mdm.MdmMetadataProvider.<init>(oracle.olapi.data.source.DataProvider, oracle.express.mdm.MdmObjectFactory)
MdmMetadataProvider.java:200
void oracle.express.mdm.MdmMetadataProvider.<init>(oracle.olapi.data.source.DataProvider)
MdmMetadataProvider.java:187
oracle.olapi.metadata.MetadataProvider oracle.express.olapi.data.full.ExpressDataProvider.getDefaultMetadataProvider()
ExpressDataProvider.java:549
oracle.express.mdm.MdmMetadataProvider oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverImpl_92.getMdmMetadataProvider()
MDMMetadataDriverImpl_92.java:1134
oracle.dss.metadataUtil.PropertyBag oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverImpl_92.attach(oracle.dss.metadataUtil.PropertyBag)
MDMMetadataDriverImpl_92.java:811
oracle.dss.metadataUtil.PropertyBag oracle.dss.metadataManager.server.drivers.mdm.MDMMetadataDriverImpl.attach(oracle.dss.metadataUtil.PropertyBag)
MDMMetadataDriverImpl.java:133
void oracle.dss.metadataManager.server.MetadataManagerImpl.buildObjectModel()
MetadataManagerImpl.java:1085
oracle.dss.metadataManager.common.MDRoot oracle.dss.metadataManager.server.MetadataManagerImpl.attach(oracle.dss.metadataManager.common.MDRoot, oracle.dss.metadataUtil.PropertyBag)
MetadataManagerImpl.java:962
int oracle.dss.metadataManager.client.MetadataManager.attach(oracle.dss.metadataUtil.PropertyBag)
MetadataManager.java:866
int oracle.dss.metadataManager.client.MetadataManager.attach()
MetadataManager.java:792
int oracle.dss.addins.designer.OLAPSource.test()
OLAPSource.java:280
boolean oracle.dss.addins.wizard.configFileEditor.OlapPanel.testConnection(boolean, java.lang.String)Hi
As part of your patching process did you run the sql module CATPATCH.SQL? If not please refer to the patch note instructions for details on how to apply this patch. This patch must be fully applied for BI Beans 9.0.3 to work correctly.
Also please check that olap_api_92.jar is in the JDEV_HOME/jdev/lib/ext directory. This will ensure that the correct connection architecture is in place. If the file is not in this directory copy it from the JDEV_HOME/bibeans/lib directory. The file olap_api_901.jar must not be in the JDEV_HOME/jdev/lib/ext directory, if it is please delete it.
Hope this helps
Keith Laker
Product Manager
Oracle Business Intelligence Beans -
How to create a Catalog (Product/Service) & TAX issues
SRM Guru's
Product Ver: SRM 5.0 : ECC 6.0 ( No CCM or Service Master )
TAX S/w: Vertex ( O )
As of now: We are planning to implement a vanilla SRM-ECC (in ext. classic). We are into Indirect procurement w/limit orders.
Catalog:
I want to create a Catalog ( UNSPSC or 1 level company catalog),
1. Can this be created in ECC (with out Products ) and replicated to SRM (EBP)
2. How to go about creating it ?
3. Can it be done with out CCM, if so how
4. How to replicate it ? ( no CCM or middleware )
5. Can i create it in EBP ? if so, plse say how..
TAX:
Vertex mentioned that, Tax codes will be mapped to services, in our case, since we dont have Services except a free form text describing what service is provided ( eg: "Payroll Service" ), what can be done ?
In a normal scenario, i can imagine having Service Master with all "Services", but in our situation, how can we use catalog to map to TAX codes. ?
PS: If you could, please describe/break down the relationship between
Catalog -- Category Id -- Product -- Services/Materials
regards.,
-RupeshHi
<u>To create internal catalog there are three possibilities</u>
1. CCM Catalog developed by SAP.
2. SRM-MDM Catalog taken over by SAP.
3. Requisite Catalog other catalog provider.
<u>Check these links -></u>
http://help.sap.com/saphelp_ccm20/helpdata/en/index.htm
https://websmp101.sap-ag.de/ibc-srm here check SRM-MDM Catalog.
http://www.requisite.com/solutions/index.cfm?pageID=productpac_bugseye
Re: Catalog Mgmt
<b>Other related links -></b>
<u>Create Internal Catalog</u>
Re: Create Internal Catalog
CCM Create catalog link
Re: creating a catalog
Catalog ID does not exist
Re: SRM Contract Catalog - Creation
CCM SRM product catalog
Re: Product Catalog to CCM
<u>Managing Catalog content in SRM</u>
http://help.sap.com/saphelp_srm50/helpdata/en/0a/f9353e39011a38e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/ba/7a50415e216e24e10000000a155106/frameset.htm
<b>P.S: All tables for CCM (Catalog tables and CCM) start with "/CCM/" ,so you can search on that using SE11 transaction.</b>
<u>MDM-SRM Catalog</u>
Re: MDM SRM - Catalog - External Catalog - Punchout
<u>Punchout catalog</u>
Punchout catalog
<u>Loading Product Data into Catalog using CSV files</u>
Loading Product Data into Catalog using CSV2.0 file
<u>Contract catalog</u>
Re: Contract catalog
Hope this will definitely help. Do let me know.
Regards
- Atul -
MDT 2012 Deployment Workbench cannot genererate catalog for any images
It just hangs generating a catalog for the operating system (Windows 7 64-bit) and says it "could take a long time."
I have tried with multiple images.
I have waited a long time (more than 30 minutes) and the progress bar will not move.
I click Stop Execution and it tries to stop, but doesn't compete the process of stopping.
The only way to get out of it is to use task manager to force it to quit. Then the Deployment Workbench will no longer load until the entire server is restarted.
How can this be fixed?If you're storing the image on a filer, it can take a bit sometimes to process a catalog file. If you're really curious what the heck it's doing and think it's frozen -- because I've gotten into the same place and thought what is this thing doing?? Check
the logfile it generates at %temp%\Microsoft.BDD.Catalog.log . It doesn't log much but will log progress for you.
Also, the image needs to be open for a catalog to be created. It will mount it in the same %temp% directory, under a long path named after the tasksequence ID. That error you saw when on another account was most likely that the WIM you were building
a catalog for was already mounted, or the mount was corrupted at that point. To resolve an error like that in the future -
1. dism /get-mountedwiminfo -- note the really long pathed image mounted to the temp directory.
2. dism /unmount-wim /mountdir:%TEMP%\whateverthefolderis /discard
3. Retry catalog creation. Usually any errors during catalog creation will be from a stale image or image in use. Checking /get-mountedwiminfo will often tell you right away if there's an issue and mark the status : Needs Remount.
Best bet with creating catalogs, watch the bdd catalog log in temp and just don't touch anything else for 15-60mins depending on network latency. Hope this helps.
Ryan -
Add a custom table for field selection while creating field catalog for LIS
Hi,
I have a requirement to add a Custom table to be available for field selection while creating a field catalog for LIS. Its required as there are many custom fields to be used for field catalog creation and adding them in one of the existing tables listed is not a feasible option for us. Please let me knw if its possible..?? If yes how to get it done..??
Regards,
Akash Sinhahi,
You need to add your field in the Data Dictionary first. For example, if
you want the new field in the Order Item field catalog do the following.
Look at structure MCVBAPUSR (SE11). If you already have a user structure
appended to this structure then you can add your new field to your existing
structure. If there is no structure already appended to MCVBAPUSR then you
must create a new structure with your field in it and then append the new
structure to this one.
If you look at structure MCVBAP you will see the data appended to the end
of it.
Now you should see it in the field catalog.
regards,
balajia -
New RMAN catalog in existing EMREP database - new user and tablespace?
Hi all,
I am FINALLY getting "with the times" and trying to get my databases to back up with RMAN. I already have a dedicated server that is running Oracle Enterprise Manager 10g Grid Control, so it already has the OMS database on it, called EMREP. I was hoping to just use this database as my RMAN catalog, is that considered good practice or not?
So assuming this practice is considered OK, I know that I need to create a new user (which I'll just call RMAN) in this database. Would it be best to also create a separate tablespace for this user? I have no idea how big I should expect this RMAN schema to get. I'm sure it all depends on the number of databases I'm backing up, but can anyone give me some realistic size expectations that I could start with?
Any advice/info is greatly appreciated!I think that the catalog is only applicable if you will have several databases to manage.
If you he will have only one, I dont see necessity to use the catalog, therefore with backups of controlfiles only, you can to execute the tasks of backup/restore/recovery.
But, for catalog creation information, see
RMAN CATALOG CREATION STEP BY STEP by Joel Pérez
RMAN ( CATALOG CREATION ) STEP BY STEP by Joel Pérez
Message was edited by:
ARF -
Inactive Catalog item still display in SRM - MDM catalog
HI,
I have one new issue in SRM-MDM catalogs.
For Catalog Item there is one field called 'status' having value Active and Inactive and I change the status to Inactive for one of the Catalog item in Data manager but when i access the same in SRM - MDM catalog from Shopping cart, the Catalog item still display there.
Does anyone guide me.
SmritiHi experts,
I'm facing the same issue...
I check the NAMEDSEARCH parameter used in the Catalog definition in SPRO and in some cases we have data in this field and in other cases we haven't. Is this a problem?
Thanks for your help
Regards,
FS
Maybe you are looking for
-
Hi all I bought a second hand mac (boo i know but i am a student so cannot afford a new one!) it is a 2009 model, 15" with 8gb memory It works fine until a point where it randomly switches itself off! I can be watching something, on photoshop, on iph
-
ABAP Query Selection Screen Comment
Hi, I want to display some text (just text) on Selection Screen of an abap query. If this was a regular abap program I could have simply used "SELECTION-SCREEN COMMENT... " and that would have been enough. But since I dont seem to have access to In
-
I recenly changed device from BB Curve 8530 to BB Bold 9900 and ever since then can't accept BBM invitations and Invites sent shows only as "Pending for Authorization" but recipients are not receiving them either. Tried sending PIN messages but I g
-
The Data Modeler is a great Tool within SQL Developer. Will there be a possibility to work with it, without installing Subversion extension in the next Version of SQL Developer?
-
Doubt abt Digital Certificates
I have got a server certificate from versign by sending my private key of weblogic. In the weblogic 6.1 i don't know what to put in the following text box provided. Server Certificate Client FileName: (Default while using weblogic certificate will be