Catalog integration in MM (html - SAP-field mapping)

Hi Experts! When integrating Catalog with MM (ME21N and ME51N), the only customizable entry in the IMG is the call-structure. Anyone who knows the transaction codes  / tables for HTML-SAP-field mapping (OCI) for this scenario ?? (For PM/CS/PS-orders this is available, but I have not managed to find this for MM)...
brgs ziggy

to pull Metadata from CMS repository into MM, you will have to configure the CMS Integrator and run that CMS Integrator, this you can do from the CMC
as Werner mentioned SAP BW Integrator is being added for next MM release
its not possible to import Metadata from Excel Sheet into MM, you will need a Integrator to do that, MM supports Integrator for CMS, Data Services, RDBMS, and there are few more Integrators that are provided by MITI (it requires a separate license)
I don't think it will be possible to mimic the impact and lineage

Similar Messages

  • SAP Field Mapping to I-Doc INVOIC

    Hi,
    I am looking for a documentation of mapping for I-Doc INOVICE02. Would like to know which SAP Standard fields (VBAP, VBAK) are going to be mapped in which I-Doc Segment, field for INOIVCE (Outbound).
    Does anybody know where I can find this?
    Thanks and best regards
    Isabella

    Hi Isabella
    I've just been through the same exercise, although with a different idoc/tables.
    The best advice I have is that if the segment field name is the same as the table field name, then you've found a match.
    It's a bit hit and miss, I know, but I couldn't find a neater way.
    James

  • Mapping HTML fields to SAP Fields in OCI

    Hi Gurus,
    I am currently working on the Punchout Catalog Functionality. For mapping the HTML fields to SAP Fields, i am not getting the main node "Interface for Procurement using Catalogs".
    Is there any settings to be made or any report/program needs to be run to enable this main node?. please advice regarding this.Thanks.
    With Regards,
    Saakithyan

    Hello,
    You will need to maintain a field link to transfer the imported fields to SAP internal fields. This can be done in customizing as following IMG point (under Plant Maintenance and Customer Service - Maintenance Plans, Work Centers, Task Lists and PRTs - Task Lists) :                                                            
                  > Interface for Procurement Using Catalogs (OCI)        
                    (/) Convert HTML fields to SAP fields                                                                               
    Please review this again.  
    Regards Gabor

  • SolMan-HPQC Integration - Field Mapping

    Hi,
    All the installations and configurations are done on both SolMan and QC.
    Blueprint Integration is done and working fine.
    During Defect Integration, when we try to do "Field Mapping" in QC, getting the below error message.
    "The number of required defect fields in Quality Center is different from the number of required support message field in Application; Make sure the number of required fields is equal in both systems before you continue"
    Once clicked "OK" to error message, there are no SAP Fields listed on both 'required fileds' and 'Non-required fileds' Columns.
    Any solutions to resolve this issue?
    Thanks,
    Veera

    Hi,
    In the future, please reference the product being used to communicate between SOLMAN and HPQC.  I assume this may be SAP TAO?  Either way, you may be getting quicker replies to assist in resolving your problems this way.
    Regards,
    Mark

  • SAP GRC 10 - Field Mapping

    Gurus,
    we have defined field mapping for User type but when request got closed ....still its provisions user type "dialog" , But i have selected user type as "service" in request .
    And also define field mapping  for user type AC custom field with system field name USTYP and table is IS_LOGONDATA  @Governance, Risk and Compliance >Access Control>Maintain Mapping for Actions and Connector Groups.
    Please let me if I am missing any configuration for field mapping.
    Thanks,
    Jagat

    Hello Aman,
    Thanks for the reply.
    As per my knowledge there is no direct way or configuration in GRC10 for provisioning the non-dialog useru2019s , So thatu2019s why we have created Custom field and map this field to Su01 field in SAP.
    FYI u2026.We did all the configuration related to field mapping u2026but still by default itu2019s taking user type as dialog. Do you know any SAP Note related field mapping released by SAP for GRC10.
    Thanks,
    Jagat

  • MDM catalog integration with SRM 7.0

    Hi all,
    We will be upgrading from SRM 5.0 to SRM 7.0
    We currently have CCM .....Few questins on catalog enablement for us with SRM 7:
    1.With SRM 7,0,can we use CCM oor MDM is the only option???
    2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
    3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
    4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
    5.What are additional features in SRM MDM 3.0 catalog  in contrast to CCM??
    6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
    7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
    8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
    9. Where can I find some sample catalog files for test upload?
    10.What are the lastest SP for MDM available for integration with SRM 7.0??
    11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
    12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
    I have gone through the help links but wud like ansers to above ques based on experiences of the forum members...Please provide inputs to my above queries if anybody has worked on MDM catalog integration with SRM 7.0....
    Thanks for your time.

    HI,
    1.With SRM 7,0,can we use CCM oor MDM is the only option???
       You can use any catalogs which support SAP OCI interface.
    2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
       MDM Server(contents) and AS Java(for UI) are required. Please check the installation guide.
    3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
       Same as SRM 5.0. Define External Web Services.
    4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
      Yes. You can use Import Manager. No issues.
    6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
      MDM Extractor is available.
    7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
      Mainly for contents mapping.
    8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
      Any. Even for DB interface is also supported. You see all options when you run import manager.  
    9. Where can I find some sample catalog files for test upload?
      Sample repository definition is delivered. You can manually create 1 entry by Data Manager.
    10.What are the lastest SP for MDM available for integration with SRM 7.0??
      You can find it SAP Service Marketplace. http://service.sap.com/swdc
    11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
      You can use contract and contract items are transfered to Catalog.
    12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
      Yes. Catalog is just Catalog.
    Regards,
    Masa

  • Using the HTML SAP GUI inside the Enterprise Portal?

    Hello everyone
    In our company we plan to set up the SAP Enterprise Portal (NetWeaver 7.0). The first application we want to provide inside the portal is the SAP GUI that connects to our SAP ERP 2005 system via single sign on. Therefor two different approaches exist:
    1: Using the standard SAP GUI inside a portal iView. In this case every client pc needs the SAP GUI installed.
    2: Using the HTML SAP GUI. In this case we have to set up the integrated ITS in our SAP ERP system.
    Now I have some questions about the second approach. Is the functionality of the HTML GUI equal to the functionality of the standard GUI? If not, what are the restrictions? How high is the additional load on the network and SAP ERP system caused by the HTML GUI? Would you recommend this approach for a system with more than thousand SAP users?

    Hi Marc,
    At least if you consider using webgui, you should test the transactions properly as there are some issues for example with scandinavian characters and lines visible in lists of search helps.
    Also you might want to consider the limitations of the screen resolutions and space which the portal framwork already takes from the gui. This of course is a topic for both HTML/SAP GUI's.
    Kind regards,
    Ville

  • LDAP Field Mapping in 4.6C - Using WebAS 6.10+ as an LDAP Gateway

    Dear All,
      We have a need to enable CUP Functionality (we use GRC AC 5.3) for one of our oldest R/3 systems - on 4.6C. All other R/3 backends are on 4.7+ releases, so it's a multiple backend configuration for GRC AC.
      However, LDAP Field Mapping functionality is missing in 4.6C. It was enabled through LDAPMAP in the higher releases only.
      At the same time, I discovered in one SAP HR document a diagram, which shows that indeed 4.7+ can map and post data directly to LDAP, but for 4.6C and below you can use WebAS 6.10+ as an LDAP Gateway. Meaning that 4.6C calls through RFC some functions in the higher release R/3 system to use its functions for Field Mapping and further transfer of user data to the target LDAP server.
      But... I can not find anywhere how to configure 4.7 / 6.0 servers to act as an LDAP Gateway for the older 4.6C server to bypass its limitation - absence of built-in LDAP Field Mapping functionality.
      Advice on how to realise this concept will be highly appreciated.
    Thanks,
    Laziz

    Hi,
    In order to migrate users, groups and password you have to use the command ldapaddent as you did with this sintax:
    # ldapaddent -D "cn=Directory Manager" -w secret -f /etc/group group
    # ldapaddent -D "cn=Directory Manager" -w secret -f /etc/passwd passwd
    # ldapaddent -D "cn=Directory Manager" -w secret -f /etc/shadow shadowNote that you must use passwd instead of people container.
    I suggest you to check this article from BigAdmin http://www.sun.com/bigadmin/features/articles/nis_ldap_part1.jsp
    G.

  • InfoObject to R/3 Field Mapping

    Does anybody know of a list that shows the standard Business Content InfoObjects and what they typically are mapped to in R/3?
    The reason is that I want to use the standard InfoObjects wherever possible without creating new ones unnecessarily.
    As an example of a small part of what I'm looking for, see the list below.
    0CUSTOMER                  KUNNR
    0DOC_NUMBER              VBELN
    0SALESORG                  VKORG
    Also, having something like this for CRM would also be helpful.
    Thanks!

    There really isn't any good BI Content to R3/ECC field mapping available. Using the SAP Help Portal and BI Content are the best ways to assimilate the "tribal knowledge" for this.
    Additionally, a single R3/ECC data element can map to multiple InfoObjects in SAP BW. For example, in your short list of mappings, you have VBELN mapped to 0DOC_NUMBER. This mapping is only good for Sales Orders, because VBELN is also mapped to 0BILL_NUM (Billings) or 0DELIV_NUMB (Delivery). Same for KUNNR, that can map to 0CUSTOMER but can also be mapped to 0BPARTNER (Busness Partner - there are multiple iterations of this based on subject area / application component).

  • Configure SAP LDAP mapping for MS-ASD

    Hello,
    I 'm configuring an LDAP connector from my MS-AD to my SAP-4.7 ABAP system so the user account from the MS environment gets synchronized with my SAP system.
    I have configured the connection and created some mapping already but I have still some questions about the settings:
    1. With the report I'm able to synchronize an MS_AD account with my SAP environment. For the first test I only add one account name so all other existing accounts are not changed. When the MS-AD account not exists on SAP the account is created like the mapping. I have also the option in this report to delete the user account from the SAP system when the account doesn't exist any more in the MD-AD. How could I prevent that some special user accounts on the SAP system are note deleted even when they are not available in the MS-AD?
    2. With the mapping function MAP_SPLIT_CHAR  a variable by a certain character into two ore more SAP fields like telephone number and telephone extension. Is it possible to split the content of a variable by a fixed amount of characters?
    For example the user location is written like ABC.XZZ
    ABC is the building number and X is the floor number and ZZ is the chamber.
    3. With the mapping function MAP_conc_CHAR I'm able to combine to MS-AD fields into one SAP filed. Is it possible to combine a constant value with a field from MS-AD?
    4. I'm able to insert multiple parameters or user roles by using the function MAP_CONSTANT. I add one attribute and the constant values as parameters. For a couple of parameters I have to insert a MS-AD field. How could I combine inserting constant parameters with some MS-AD fileds
    Example
    The Parameters CAC and BUK are fixed to the company code. But the parameter PER must be set to the employee number. This value I get from the MS-AD .
    5. For the Employee mapping to SAP-HR I have also to configure the Stucture and fields. Does any one have an overview of structure names and field names from the employee structure? It couldn't be asked with the F4 option which could be user with the user mapping.
    Manny thanks in advanced for the answers.
    Kind regards,
    Richard Meijn

    Hi,
    1.
    create a user group for the special users and another user group for "real" users. Restrict the synchronization report to the second user group.
    2.
    You can write your own mapping functions. You will need a developer key in your system and some ABAP knowledge. Create your functions with SE80 or SE37. It is easy to create a function
    3.
    The same: create your own mapping function.
    4.
    It might be possible to fill the different parameters from different AD values depending on the parameter name. Use the ABAP statement "CASE". But there is no such function. You have to write it by yourself.
    But think about what you really want to do. Do you want to invent an Identity Management? There are already a lot of tools. The SAP answer "SAP Netweaver Identity Management" was already mentioned.
    Regards
    Rainer

  • IDOC field mapping

    We currently use PEXR2002 IDOC for outbound payments. Is there a place in SAP where I can see what data in SAP is mapped to what fields in IDOC? I am specifically looking for segment E1IDBW1, currently this segment is blank, not sure what data goes into this segment in the standard payment processing without using any user exits.

    The is a Structure table called E1IDBW1 (for special instructions). To be found via SE16-> Use the drop down box->Tick Information System->Fill the field Table Name with E1IDBW1. make sure you select the Structures in the additional selection tab. -> execute->stand on the table name->Hit Display.

  • CUP - field mapping from request to SU01 for Accnt No worked only once

    CUP - field mapping from request to SU01 worked only once. I configured the Field Mapping for Account Number with Account Id. First request worked fine in DEV systems, 2nd and 3rd requests failed. Same thing happened in QA systems. Not sure whether the difference in SP on GRC and ECC is causing this. Any help is greatly appreciated.
    We are currentky on GRC 5.3 ABAP stack SP 14.0  
    and
    ECC - SAPK-53315INVIRSANH VIRSANH 530_700: Support Package 0015
    Any help is greatly appreciated.
    Thanks,
    Vish

    Hi Diego,
    Yes, we are on VIRSANH SP15  also VIRSAHR SP13 for SAP_HR . My connector type is SAP HR System, Version ECC 6.0.
    We are on GRC 5.3  Support Pack 14.0 . Our GRC 5.3 installation is running on ABAP stack.
    It is very strange that in QA client, SU01 got updated atleast 3 times with new account number , user group. Tried 4th time, did not work. In DEV client, it worked only once.
    Thanks,
    Vish

  • R/3 - MDM field Mapping

    Hi All,
    I am looking for latest R/3 and MDM field mapping for Customer, Vendor, material and Product. I already have IDoc to MDM mapping included in SAP business content. But i am looking for R/3 and MDM field mapping. it would be of great help for me if anyone can send me this on my id [email protected]
    Thanks,
    SHiv.
    Points will be rewarded for helpful answers.

    Hi shiv,
    When u unzip the business content for Customer,material,vendor then in the repository u have remote systems which have a list of standard remote systems namely R/'3,Data warehousing..etc.
    Now in the Import Manager select type as <given data format> and the remote system as R/3 since u r importing the data from R/3.
    After doing this you can import the maps and then u will get a list of all maps in a sequencail order .selecting this map will help you to map the R/3 fields to MDM for customer/material/vendor.
    note the mapping has to be done in the given sequence in the list.
    Please award points if u find these blog helpful.
    Thanks and Regards
    Deepankar Pandit

  • One (src)to many(target) field mapping

    Hi,
    I am new to XI.Is one to many field mapping possible in XI?
    Plz send me the links with examples.

    Hi,
    Yes it should be possible.
    Follow this links
    http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm

  • Hi guys.Is SAP Certification is beneficial to get through in SAP field

    Hi guys,
                I want to know whether SAP Certification is beneficial for guys who don't have working experience of SAP or not.Can anyone have a chance to get through in the field of SAP after clearing SAP Certification.Please provide me your valuable suggestions.Waiting for your kind response.

    Hi
    SAP certification always beneficial to come is sap
    But before come into sap you should have some 2 to 3 year of core experience of industries so you can map the procedure and understand sap logic
    and it also depend upon you knowlege after certification how much you gain at least basic knowledge of SAP
    certification will  help to get through in SAP field but certification not only one parameter there are number of parameter also which will help you
    Regards
    Kailas ugale

Maybe you are looking for