Catalog not completely imported.

Just upgraded from PSE9 to PSE12 and in the media browser the dates and star ratings are not displayed.  How can I get them back?

Hi,
Assuming that you converted the catalog successfully, then it is probably just the display. On the View menu make sure that Details & file names (if you want them) are checked.
You may have to increase the size of the thumbnail (see zoom at the bottom) to show the information.
Brian

Similar Messages

  • Could not complete import command.

    Hello,
    I get an error message that says "Could not complete import command because of a problem with the acquistion interface." I've commented out all of my code and even the code inside of the main entry point and still get this error. What causes this problem? Thank you.

    Could be a bad PiPL description, could be that you aren't returning the right value for success in your code, etc.
    Go back to the example code that you know works, then work forward to your code and test it at each step.

  • IPhoto does not complete importing final image

    So when using iPhoto *after last update of osx* My iPhoto will import however many pictures i have off my CF card, but when it gets to the *1 remaining* it just sits there and i have to force iPhoto to quit and then none of the pictures end up getting imported. I tried doing this with just a single picture import and the same thing happens. If there are 50 pictures it will get thru the first 49 pictures and on the 50th one it just sits there and never completes the import. Everything was fine before the latest OSX update.
    Thank you
    Chuckie.

    Chuckie:
    Welcome to the Apple Discussions. Try uploading the CF card to the desktop using Image Capture (located in the Applications folder). Then use the camera to reformat the card, not just erase but reformat. Then try again.
    I'm not an advocate of having iPhoto do the importing from the camera and erasing the card. I prefer to upload (with a card reader) to a folder on the desktop where I can name the folder what I want the roll in iPhoto to be titled, and then drag that folder into the open iPhoto library window. This will save wear and tear on the camera's USB port and avoid bad uploads (and possible damage to the library) due to a low battery shut down during the import. Also there's been too many reports of incomplete uploads and complete erasures by iPhoto. Not a good situation to be in. It's just safer, IMO, to do the uploading and erasing of the card manually.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Import successfully but all tables and data are not completely importing

    We have A UGS product called Teamcenter running on oracle 9i database. It is developement so it is very small 200M The problem is I am doing daily export but when imported back into DB it does not recovering all the data that I had exported. I am wondering any special about UGG product that requires special method for backup??? Anyone familiar with this , I would appreciate if you can provide me some leads .Thank in advance.
    Jonathan nguyen

    Don't know about UGS but it will be helpfull if you tell us that how are you taking the export?? Means full database or schema level and also how are you importing??
    Can you post the export and import command which you are using?
    Daljit Singh

  • Lightroom catalog not complete

    I'm in a bit of a pickle. Yesterday I installed OSXC yosemite on my iMac 2013. Prior to doing this I opened lightroom and backed up my catalog, which is stored along with all my pictures on an external thunderbolt drive.
    I installed yosemite clean, meaning I formatted my hard drive. installed lightroom and told it to open my catalog which is on the external.
    the problem is when it opened, it was missing about 6 months of work and files?? it was not up to date??
    i right click on the folder and tell it to synchronize. so indeed all files are there but the main issue is all those presets, changes i made to each file are gone.
    it means I now have to redo all the work on the original files, cropping, exposure and all that.
    is there a way to get it all back?
    why did it not pickup exactly where it left off - which is what i expected
    any help is very much appreciated as I've lost over 6 months of work
    again, files all seem to be intact but the actual work done to the image is gone.

    When i open lightroom, prior to installing and updating to yosemite, it would open the catalog stored on the external drive.
    the date on that file is 10-17-2014, thus current.
    my lightroom catalog is stored on the external drive, same place where all my pictures are.
    as for backups, they are identical, same issue.
    i dont understand why lightroom when opening my catalog on 10-17 was fine but when i update to yosemite and open exact same catalog its missing 6 months of information, despite the fact date on catalog is 10-17 and is same file on same location on an external drive.
    i tried a backup file and same thing.

  • Lightroom 5 (64-bit) Import from Another Catalog... will not complete.

    Ok, here is the situation.  I have a LR4.4 cataloge that contains thousands of edits and all my publish services. File size is 1.2Gb.  I used the LR5 beta and would like to import the edits from that catalog as well as the edits and services from the LR4 catalog.
    Here is what I have tried.  Open the LR4 catalog in LR5, tell it to upgrade the catalog for use with LR5.  This step works without any issues and the edits and services are present.  Now I tell LR5 to import from another catalog and select the LR5 beta catalog.  LR begins processing but will never complete.  Once it gets to checking for changes in duplicates it seems to hang.  Checking the Windows Task Manager reveals that LR5 is still processing, but I have let it sit for over a day and it will not complete the process.  I have also optimized both catalogs before attempting the import again, but that seemed to have no effect.
    The system should have plenty of processing power being that it is an overclocked 6 core Phenom II running at 4.25GHz with 16GB of RAM, but it seems to just never finish.
    Ideas?

    CSS Simon wrote:
    If that doesn't work I don't know what to suggest.
    If that doesn't work, Dax_Morgan can use WreckHover to recover develop settings from the troublesome catalog. Note: it won't get any other metadata nor collections etc., and if Dax already has fresh xmp, that might be a preferred option. But, just so ya know...

  • CC Trial version won't import video as layers - "Could not complete your request because..."

    I am trying to import a video into Ps CC trial version to make a gif.
    Every time I click file > import > video frames to layers, I get the error message "Could not complete your request because of a program error." This is before the window to choose what video I want to import even opens. I have not tweaked the preferences and have only had the program on this computer for a day.
    The same thing happens when I open the Timeline view and try to add the video through "Add Media" on there.
    I've rebooted several times, updated my operating system, etc etc. Nothing seems to work.
    Running OS X 10.9.1, i7 processor (which is 64 bit) on a 2013 MacBook Air.
    Any ideas?

    It was already disabled when I checked. I enabled it and tried again, still didn't work. Anything else that might be wrong? i'm getting desperate lol

  • Trying to import video"Could not complete your request because it is not the right kind of document"

    When I try to import a video into Photoshop CS6 I get the error: "Could not complete your request because it is not the right kind of document".
    I have tried multiple formats with no luck. 
    I was able to improt it into Photoshop CS5 by dragging and dropping.
    Im using Photoshop CS 6 64bit, have tried 32bit with no luck
    If I try to drag and drop it, I get this error: could not place the document. Because no parser or file format can open the file. 
    I have tried opening a .mov, and a .avi file. I thought it might be a codec thing but why can cs5 open it but not cs6?
    I noticed other posts with the same issue but they did not get resolved.  Any help would be great.
    Thanks,
    Josh

    Vurgano, Powelly 100, and izzysanime,
    Has the issue been resloved?
    If so, how was it resolved?
    I see Yesughei and Powelly are on Win7.
    Izzysanime, which Win OS are you using?
    Vurgano, what platform/OS are you using?
    We are still investigating this issue and would appreciate your assistance.
    To rule out problems with the files you have, could you please verify the Photoshop CS5 sample file "CheeziPuffs.mov" will also not work? (program files\adobe\Adobe Photoshop CS5\samples)
    Also would you please verify the following:
    Virus/security/parental control software hasn't trapped parts of Photoshop, Bridge, Premiere, Lightroom, or any Adobe app using DynamicLinkMediaServer. (Make sure the Adobe apps are added as exceptions if needed.)
    Ensure you have the latest version of QuickTime
    Close all Adobe applications - wait more than 30 seconds, then launch Photoshop and try to open the file.
    - If unsuccessful, view Task Manager/Processes to verify necessary processes started up when importing video (dynamiclinkmanager.exe, dynamiclinkmediaserver.exe and Adobe QT32 Server.exe)
    - If unsuccessful, please capture the full error message text.
      4. Close all Adobe apps, wait 30 seconds - launch Bridge and try to open the file.
    If everyone is on Win 7, it makes me wonder about permissions...
    Thanks,
    Meredith

  • Importing song problem - not complete

    I am able to import most songs but I noticed that some songs are not being completely imported. I just got a new laptop (windows xp) so I don't understand why there is a problem. I did try re-installing Itunes but that didn't work. I never had a problem importing before (for the most part) and these are the same cds. It will import like half the song or other songs not at all. Can someone PLEASE help me.

    I eventually forced Aperture to close.  I was able to get the adjustment pane but in the histogram window is said no image found.
    Does it look like this in the histogram pane of the adjustment panel? And do you see warning triangles or  arrow badges on your image thumbnails, if you enable badge overlays?
    That happens, if Aperture cannot find the original image files; then you can browse the images, using the thumbnails, but cannot edit or export them.
    Have you tried to import as referenced or managed? If referenced, where should the folder with the originals be located? Do you see the originals in the Finder?
    If managed - have you repaired your Aperture library after you force quit the import? (Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library)
    Are the images still on the card?

  • HT5622 during an import my iphoto froze,  when I try to quit it tells me the import is not complete

    during an import my iphoto froze, when I attempt to quit it tells me the import is not complete

    Use the Force Quit command, under the Apple Menu

  • Whenever I try to import videos, an error tab appears, saying "Could not complete your request because DynamicLink is not available"

    Whenever I try to import videos, an error tab appears, saying "Could not complete your request because DynamicLink is not available"

    Could not complete your request because the DynamicLink Media Server is not available. | Mylenium's Error Code Database
    Mylenium

  • I have a new ipad mini 3 and the sync will not complete and import iphoto pictures

    I have a new ipad mini 3 and the sync will not complete and import iphoto pictures

    What happens? Any error messages? What iTunes level? What OS X level?

  • When I open a raw file (NEF Nikon 7100)  and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

    when I open a raw file (NEF Nikon 7100)  and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

    Oh, dear.
    If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
    OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
    I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
    PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

  • I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

    I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

    Oh, dear.
    If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
    OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
    I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
    PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

  • "Writing XMP Metadata Did Not Complete Successfully" Issue

    Hi all,
    I've been using Lightroom for a bit now. I'm on V2.5 now.  I just did a new system build and so reinstalled Win Vista 32.  My photos and XMP files are on a seperate external drive and I saved my catalog file (plus did a backup).  When I reinstall Lightroom and did the updates I then copied the old catalog 2 file to the right location.  All my pics were there with edits no problem.  I've done this several times now when I have had to reinstall the OS for various reasons. Never had an isuse
    This time I went back to change some status data on a photo that I took before the reinstall.  When I went to update the metadata I get a message that says "Writing XMP Metadata Did Not Complete Successfully".  I looked in Bridge and the data did not update.  This happens for all my RAW photos that were taken before the reinstall.  I can make changes fine but cannot get the XMP to write.
    Bridge will not make changes either. I tried changing the star rating and color label and it does nothing.
    For files that I have imported after the reinstall it all works fine.
    It is like the old XMPs are locked or the programs can't find them.  I can see them in the file manager so they are all there.
    Any ideas on the problem and how to fix it?

    I don't think they are locked.  I think Vista is just blocking Lightroom.  I went back this morning and deleted a few of the xmp's as you suggested and Lightroom worked fine and wrote the files.  Then I thought about the potential lock issue and tried opening Lightroom "As an administrator".   When I did that everything worked fine.  For some reason Vista won't let lightroom open the older files unless it sees it as the admin.  All works fine now.  Thanks!!
    Glenn

Maybe you are looking for