Catalog Not found
I have lightroom 5 on my macbook pro, I had just exported some photos onto my HDD when Lightroom crashed. Upon reopening it informed me that my catalog was not found and I have subsequently lost all my photos in lightroom. Every single one.
First of all, your photos are not stored in Lightroom. They are stored on your hard disk somewhere, they are not lost.
Your catalog contains your edits and metadata — you need to find it using your operating system's search feature, the catalog's name ends with .LRCAT. When you find this file, double-click on it to open it.
Similar Messages
-
Field Catalog Not Found in ALV
Hi Experts,
I am trying to exceute the below code its shows the Field CataLog Not Found
Code is:
TYPE-POOLS:slis.
TABLES:ekpo,mseg.
TYPES: BEGIN OF ty_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
END OF ty_ekpo.
TYPES: BEGIN OF ty_mseg,
ebeln TYPE mseg-ebeln,
ebelp TYPE mseg-ebelp,
matnr TYPE mseg-matnr,
menge TYPE mseg-menge,
bwart TYPE mseg-bwart,
END OF ty_mseg.
TYPES: BEGIN OF ty_final,
ebeln TYPE ebeln,
ebelp TYPE ebelp,
qtysup TYPE MENGE_D,
qtyact TYPE MENGE_D,
qtyrej TYPE MENGE_D,
END OF ty_final.
DATA: it_mseg TYPE TABLE OF ty_mseg WITH HEADER LINE,
it_ekpo TYPE TABLE OF ty_ekpo WITH HEADER LINE,
it_final TYPE TABLE OF ty_final WITH HEADER LINE.
DATA: wa_fieldcat TYPE slis_fieldcat_alv,
it_fieldcat TYPE slis_t_fieldcat_alv.
DATA:wa_mseg LIKE LINE OF it_mseg,
wa_ekpo LIKE LINE OF it_ekpo ,
wa_final LIKE LINE OF it_final.
SELECT-OPTIONS: p_ebeln FOR ekpo-ebeln.
START-OF-SELECTION.
SELECT ebeln ebelp matnr menge FROM ekpo
INTO TABLE it_ekpo
WHERE ebeln IN p_ebeln.
IF it_ekpo[] IS NOT INITIAL.
SELECT ebeln ebelp matnr menge bwart FROM mseg
INTO TABLE it_mseg
FOR ALL ENTRIES IN it_ekpo[]
WHERE ebeln EQ it_ekpo-ebeln
AND ebelp EQ it_ekpo-ebelp
AND bwart EQ '122'.
ENDIF.
LOOP AT it_mseg .
READ TABLE it_ekpo WITH KEY ebeln = it_mseg-ebeln.
IF sy-subrc EQ 0.
it_final-qtyrej = it_mseg-menge.
it_final-qtysup = it_ekpo-menge.
it_final-ebeln = it_mseg-ebeln.
it_final-ebelp = it_mseg-ebelp.
ENDIF.
IF sy-subrc EQ 0.
it_final-qtyact = ( it_final-qtysup ) - ( it_final-qtyrej ).
ENDIF.
APPEND it_final.
ENDLOOP.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-tabname = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'Purchase Doc'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos = 1.
wa_fieldcat-outputlen = 10.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'EBELP'.
wa_fieldcat-tabname = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'Item'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos = 2.
wa_fieldcat-outputlen = 5.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'QTYSUP'.
wa_fieldcat-tabname = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'QuatitySupply'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos = 3.
wa_fieldcat-outputlen = 13.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'QTYACT'.
wa_fieldcat-tabname = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'QualityAccepted'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos = 4.
wa_fieldcat-outputlen = 13.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'QTYREJ'.
wa_fieldcat-tabname = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'QualityRejected'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos = 5.
wa_fieldcat-outputlen = 13.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
DATA: repid LIKE sy-repid.
repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = repid
TABLES
t_outtab = it_final[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks In Advance
PoornaHi,
pass parametrs as it is given below...
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT =
IT_FIELDCAT = it_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_final[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks & Regards
Ashu -
"Field Catalog not found" ...problem in ALV reporting !!
Hi,
When i execute my report program where in I generate a Selection screen, I am able to select the values in the selection screen. Once I click on the execute button I get the message
"Field Catalog not found"...
The elabore message is
"Field Catalog cannot be determined becaus the output table structure name was not specified"
Where am I wrong ??
Find below my code ...
*& Report Z_MIGO_TXJCD_REPORT
REPORT Z_MIGO_TXJCD_REPORT.
TYPE-POOLS: slis.
TABLES: makt,mseg,zmigo_extend,ttxj,mkpf.
DATA: BEGIN OF migo_data OCCURS 0,
matnr LIKE mseg-matnr,
werks LIKE mseg-werks,
lgpla LIKE mseg-lgpla,
bwart LIKE mseg-bwart,
menge LIKE mseg-menge,
dmbtr LIKE mseg-dmbtr,
budat LIKE mkpf-budat,
txjcd LIKE zmigo_extend-txjcd,
END OF migo_data.
DATA: it_cat TYPE slis_t_fieldcat_alv,
wa_lay TYPE slis_layout_alv.
FIELD-SYMBOLS: <fs_cat> LIKE LINE OF it_cat.
SELECT-OPTIONS: so_matnr FOR makt-matnr,
so_budat FOR mkpf-budat,
so_werks FOR mseg-werks,
so_lgpla FOR mseg-lgpla,
so_bwart FOR mseg-bwart,
so_txjcd FOR ttxj-txjcd.
START-OF-SELECTION.
SELECT amatnr awerks algpla abwart
amenge admbtr bbudat ctxjcd INTO TABLE
migo_data
FROM mseg AS a INNER JOIN mkpf AS b ON amblnr = bmblnr INNER JOIN
zmigo_extend AS c ON amblnr = cmblnr
WHERE a~matnr IN so_matnr
AND b~budat IN so_budat
AND a~werks IN so_werks
AND a~lgpla IN so_lgpla
AND a~bwart IN so_bwart
AND c~txjcd IN so_txjcd.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-cprog
i_internal_tabname = 'migo_data'
i_inclname = sy-cprog
CHANGING
ct_fieldcat = it_cat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
LOOP AT it_cat ASSIGNING <fs_cat>.
CLEAR <fs_cat>-key.
ENDLOOP.
wa_lay-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_grid_title = 'MIGO report with Tax Jurisdiction Code'
is_layout = wa_lay
it_fieldcat = it_cat
TABLES
t_outtab = migo_data
EXCEPTIONS
program_error = 1
OTHERS = 2.Give 'migo_data' in uppercase as ''MIGO_DATA'.
-
Error ,Field catalog not found while doing billing with DP90
Dear Guru's
while doing billing with DP90 transaction code.i have given service order no xxxx and execute.Then i received the below error
Field catalog not found , Message no. 0K530.Kindly help me in solving the issue.
Thank u
S Babuhi naga suribabu,
I am also facing same issue. can you please help, where to check the configuration for this issue -
Field catalog not found...
hi all,
when i try to create billing request for a service order (using dp90), i am getting the following message :
Field catalog not found
Message no. 0K530
Diagnosis
The field catalog cannot be determined because the output table
structure name was not specified.
what can i do?I assume this error happens when you save the billing document, and it is a billing output issue. As said, you could verify this by removing all outputs before saving, and afterwards in change mode add them again one by one to figure out which is failing. Alternatively use the blue i icon to analyze the outputs.
Transaction NACE can be used for output setup across all modules. If the assumption regarding billing is correct, we are dealing with application V3. Mark this in the left side. Press 'output types' button and check the output types you saw in the billing document by double clicking. On the 'General data' is the access sequence assigned. Double click that. Probably will multiple output types be attached to the same access sequence. Mark the access sequence, and unfold the 'Accesses' to the left. Check out the condition tables in the Tab column. All condition tables below 599 is standard and probably OK. Note down the high numbers.
Go back to the initial screen of NACE. With the application (V3) marked, select EDIT - CONDITION TABLES in the menu.
Check each of the used condition tables here. Use utilities - Generate in the menu. Mark all boxes and execute. You can even select the entire range 500-999 at one time if you prefer. At least one condition table should give errors in the generation. -
Cisco ISE with AD Problem: "Could not read groups data: Global catalog not found"
Hi all,
When I make the ActiveDirectory integration with Cisco ISE, I have complete with this integration. but when I try to read the Groups from Active Directory, ISE shows the message "Could not read groups data: Global catalog not found".
My Domain has multiple sites and subnets, each contains GC for local logon. I have set ISE to the correct site and subnet. Forward and Reverse DNS are working with no error.
Does anyone get this problem, please help.
I have check into the ISE CLI Reference Guide 1.1.x
You are about to configure Active Directory settings.
Are you sure you want to proceed? y/n [n]: y
Parameter Name: dns.servers
Parameter Value: 10.77.122.135
Active Directory internal setting modification should only be performed if approved by ISE
support. Please confirm this change has been approved y/n [n]: y
What shoud I set in the Parameter Name ? dns.servers or my dns hostname ?
Please suggest for this too.
Thanks and Regards,
Pongsatorn M.Hi Pongsatorn,
Thanks for the reply!
I've attached the results of the ISE detailed AD test. As you can see, there is a fair number of domain controllers in the AD forest.
It seems everything works correctly until it gets to testing the AD connectivity on port 3268. Then I get this:
Testing Active Directory connectivity:
Global Catalog: pdascdc02.xyz.com
gc: 3268/tcp - refused
Testing Active Directory connectivity:
Global Catalog: pdascdc02.xyz.com
gc: 3268/tcp - refused
For some reason, the request to the controllers on port 3268 is being refused.
Any thoughts you might have are greatly appreciated.
Cheers,
Greg -
Sap upgrade-Error when using DP90-OK 530-field catalog not found
Hello,
We are upgrading from 4.6c to mySAP ERP 2004 version. In 4.6c, we are using VA90 to create a sales order from service order to bill the customer. However in mySAP ERP 2004 version, VA90 does not exist. So we created DP profile and are using transaction code DP90 to create billling request for the service order. However, System gives an error 'Field catalog not found'. The diagnosis says that -The field catalog cannot be determined because the output table structure name was not specified.
Please help us how to solve the above problem.
Thanks
Malahi mala,
did you see SAP-message 442170?
it is all about conversion VA90/DP90.
hope this helps.
br,
matthias
Message was edited by: Matthias Leitner -
Hello there,
I am having problem changing a classic ABAP report to ALV as am hitting the error "field catalog not found".
I am using this 2 functions to help me convert it to ALV format.
and a snippet from my code :
MODIFY gt_i_data FROM wa_i_data TRANSPORTING priokx.
ENDLOOP .
gt_report[] = gt_i_data[].
perform f_assign_alv.
perform f_display_alv.
1.f_assign_alv
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = c_repid
i_internal_tabname = 'GT_REPORT'
i_inclname = c_repid
CHANGING
ct_fieldcat = gt_fieldcat.
2._display_alv.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_grid_title = v_grid_title
is_layout = v_layout
it_fieldcat = gt_fieldcat
TABLES
t_outtab = GT_REPORT
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
I noticed during debug,inside 'REUSE_ALV_GRID_DISPLAY' the possible location of error cud be at :
if i_screen_start_column is initial and -
>all these values are empty
i_screen_start_line is initial and
i_screen_start_column is initial and
i_screen_end_line is initial.
gt_grid-flg_popup = space.
call screen 500. else. -
>point of error
gt_grid-flg_popup = 'X'.
call screen 700
starting at i_screen_start_column i_screen_start_line
ending at i_screen_end_column i_screen_end_line.
endif.
Need your expert advice, please guide.Thanks so much!!Hi Neesha,
If you are using FM 'REUSE_ALV_FIELDCATALOG_MERGE', during data/types declaration, you have to use the LIKE keyword and not the TYPE keyword.
If you use TYPE, the fieldcat will not be populated.
DATA: BEGIN OF GT_REPORT OCCURS 0,
ebeln LIKE ekpo-ebeln,
ebelp LIKE ekpo-ebelp,
matnr LIKE ekpo-matnr,
werks LIKE ekpo-werks,
menge LIKE ekpo-menge,
netpr LIKE ekpo-netpr,
peinh LIKE ekpo-peinh,
netwr LIKE ekpo-netwr,
END OF GT_REPORT.
Regards,
Jovito.
Edited by: dsouzajovito on Jan 10, 2011 11:32 AM -
Strange JMSException: Message catalog not found
I have built a module that offers a method to send JMS messages. I am using MQSeries as MOM product.
My send-method uses a QueueConnection created during Instantiation of the class, but creates all other JMS-related objects (like QueueSession, QueueSender, Queue etc.) when called, since these classes are not thread safe according to the IBM docs. I close these resources after usage as recommended.
Now I did some automated testing, i.e. I am sending large amounts auf messages over the queues.
It works perfectly normal at first, but after 103 (usually) or 104 (rarely) sent messages I get a strange exception from a call to my QueueConnection object (outboundConn):
The code:
try {
outboundSession = outboundConn.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
} catch (JMSException e) {
System.out.println("StubConnecion.sendMessage(Message requestMessage, String requestQueueName, boolean synchronous): creating queue connection for sending: "+e);
Exception lEx = e.getLinkedException();
System.out.println("Linked exception: "+lEx);
System.exit(1);
The exception reads:
StubConnecion.sendMessage(Message requestMessage, String requestQueueName, boolean synchronous): creating queue connection for sending: javax.jms.JMSException: MQJMS2005: Fehler beim Erstellen von MQQueueManager f�r 'rtulmx0111:QM_server'
Linked exception: com.ibm.mq.MQException: Message catalog not found
The first line is just my output, the second line is more interesting. It gives a JMS error code with a message. The message is german (as is my version of MQSeries), it translates to: "Error creating MQQueueManager for 'localhost:QM_server'
The JMS Exception encapsulates an IBM-specific MQException.
The reason 2009 means:
"Connection to the queue manager has been lost. This can occur because the queue manager has ended. If the call is an MQGET call with the MQGMO_WAIT option, the wait has been canceled. All connection and object handles are now invalid."
Well, my queue manager has not ended and the listener process one has to start for MQSeries is still running.
Does anybody have an idea what could cause this strange behaviour?Yes, I DO close the resources after usage. :-)
But I solved, or better worked around the problem.
It only occured when I used MQJMS_TP_CLIENT_MQ_TCPIP as transport type. After correcting the problem that leads to the "unable to load message catalog - mqji" error message whenever one starts a JMS app (it is caused when the mqji properties-files are not in the PATH environment variable), I was able to use MQJMS_TP_BINDINGS_MQ as transport type. That one works great.
Has anyone ever found a place where the differences between the transport types are explained? -
'Field Catalog not Found' - ALV Grid using CustomContainer+Fcat
The Following piece of code throws 'Field Catalgo not found'
Please give me necessary changes in the code.
Thanks & Regards
Harsha Ch.
*& Report ZCHK_ALV_CUSCONT1 *
REPORT zchk_alv_cuscont1 .
DATA itab LIKE STANDARD TABLE OF mara WITH HEADER LINE.
SELECT matnr meins mbrsh FROM mara INTO CORRESPONDING FIELDS OF TABLE itab UP TO 10 ROWS.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
DATA fcat1 TYPE lvc_t_fcat WITH HEADER LINE.
DATA fcat TYPE STANDARD TABLE OF lvc_s_fcat.
DATA: c1 TYPE REF TO cl_gui_custom_container.
DATA: a1 TYPE REF TO cl_gui_alv_grid.
CREATE OBJECT c1 EXPORTING container_name = 'CC_ALV'.
CREATE OBJECT a1 EXPORTING i_parent = c1.
PERFORM populate_fcat.
PERFORM generate_grid.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form POPULATE_FCAT
text
--> p1 text
<-- p2 text
FORM populate_fcat .
fcat1-reptext = 'MATNR'.
fcat1-fieldname = 'MATNR'.
fcat1-col_pos = '1'.
APPEND fcat1.
CLEAR fcat1.
fcat1-reptext = 'MEINS'.
fcat1-fieldname = 'MEINS'.
fcat1-col_pos = '2'.
APPEND fcat1.
CLEAR fcat1.
fcat1-reptext = 'MBRSH'.
fcat1-fieldname = 'MBRSH'.
fcat1-col_pos = '3'.
APPEND fcat1.
CLEAR fcat1.
ENDFORM. " POPULATE_FCAT
*& Form GENERATE_GRID
text
--> p1 text
<-- p2 text
FORM generate_grid .
CALL METHOD a1->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME = 'MARA'
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
it_outtab = itab[]
IT_FIELDCATALOG = fcat
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GENERATE_GRIDHi
This works fine:
*& Report ZCHK_ALV_CUSCONT1 *
DATA ITAB LIKE STANDARD TABLE OF MARA WITH HEADER LINE.
DATA FCAT1 TYPE LVC_T_FCAT WITH HEADER LINE.
DATA FCAT TYPE STANDARD TABLE OF LVC_S_FCAT.
DATA: C1 TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: A1 TYPE REF TO CL_GUI_ALV_GRID.
START-OF-SELECTION.
SELECT MATNR MEINS MBRSH FROM MARA INTO CORRESPONDING FIELDS OF TABLE
ITAB UP TO 10 ROWS.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* TEXT
MODULE STATUS_0100 OUTPUT.
* PERFORM POPULATE_FCAT.
PERFORM GENERATE_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
* FORM POPULATE_FCAT *
FORM POPULATE_FCAT .
FCAT1-REPTEXT = 'MATNR'.
FCAT1-FIELDNAME = 'MATNR'.
FCAT1-COL_POS = '1'.
APPEND FCAT1.
CLEAR FCAT1.
FCAT1-REPTEXT = 'MEINS'.
FCAT1-FIELDNAME = 'MEINS'.
FCAT1-COL_POS = '2'.
APPEND FCAT1.
CLEAR FCAT1.
FCAT1-REPTEXT = 'MBRSH'.
FCAT1-FIELDNAME = 'MBRSH'.
FCAT1-COL_POS = '3'.
APPEND FCAT1.
CLEAR FCAT1.
ENDFORM. " POPULATE_FCAT
* FORM GENERATE_GRID *
FORM GENERATE_GRID .
CHECK C1 IS INITIAL.
CREATE OBJECT C1 EXPORTING CONTAINER_NAME = 'CC_ALV'.
CREATE OBJECT A1 EXPORTING I_PARENT = C1.
CALL METHOD A1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_STRUCTURE_NAME = 'MARA'
CHANGING
IT_OUTTAB = ITAB[].
ENDFORM. " GENERATE_GRID
Max -
Flash Player 11.8 SCUP Catalog not found
When should SCUP Catalog have update (vesion 11.8.800.94)?
Thank'sChrome has it's own Flash Player embedded by Google.
TO check it, type "chrome://plugins" in the address bar.
If it IS enabled, you may need to update Chrome or reinstall it. -
I tried to access PSE Organizer and received the message"catalog not found"
Why did this occur? How do I find my catalog?
judcol57Usually this happens when you accidentally move your catalog file.
What version of PSE? -
I just upgraded a database to 7.6.0.12. The catalog of the upgraded database is corrupt for one user. When I try to view the triggers defined for the user I get this message :
General error;-9205 POS(1) System error: AK Catalog information not found:0000000000000000007200
SELECT * FROM "DOMAIN"."TRIGGERS"
All other entities, tables, sequences, procs appear to be valid. Another user's entities are all present and correct, including triggers.
How can I repair the catalog to allow me to recreate the missing triggers?Hi again Joe,
with the help of the vtrace you provided, we found out the TABID of the involved table: 0x000000000000051E
We now need to find out which table it is:
SELECT SCHEMANAME, TABLENAME FROM TABLES WHERE TABLEID = x'000000000000051E'
After finding out the relevant table, there are two options:
1. delete the triggers for this table
or
2. copy the table in a new table, delete the old table and rename the new table to the old table:
CREATE TABLE <schema>.<new_table> AS SELECT * FROM <schema>.<old_table>
DROP TABLE <schema>.<old_table>
RENAME TABLE <schema>.<new_table> TO <schema>.<old_table>
This all (point 1 AND 2) should preferably be done within a transaction, so it can be rollbacked, should anything go wrong.
Please note that in point 2 that all given privileges, defined views and indexes no longer apply or exist, these have to be regiven/recreated.
It might thus be a good idea to check if there are views defined using the table <schema>.<old_table> BEFORE following the steps of point 2.
Regards,
Roland -
Catalog objects are not found sometimes.
Sometimes we hit an error that our catalog objects are not found. We find that the relevant column views in the schema _SYS_BIC are missing. So it should be the root cause. But we don't know why these views are removed. Could you give us some explanation?
Thanks,
LiHi Li,
I think maybe they are deleted by someone manually.
BR,
Phoebe -
Error "Account not found" in Catalog
Hi All!
I have a problem with the catalog of OBI EE.
When connecting to multiple users showed the error "Account not found".
I've located the "Catalog Manager" accounts whose permits were <delete Account>. I deleted those accounts and have been fully rebuilt. These accounts are already functioning.
But to connect to the "Presentation" with the manager and access the option "Manage users and groups" by clicking the link "Show users and groups," again gives the error "Account not found". The log shows:
An error occurred during execution of "connect". No connection could be made Actively Because the target machine refused it.
[Socket: 868]
Type: Error
Severity: 42
Time: Mon Oct 26 13:31:01 2009
File: project / WebSecurity / securitymanager.cpp Line: 84
Properties: ThreadID-6808; HttpCommand-getAccounts; remoteIp-10.12.127.129; User-Administrator
Location:
saw.httpserver.request
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadPool
saw.threads
Account not found.
Any ideas?
Regards.When you log in into presentation services as administrator, you can still see these users in the user list? You have to delete them not only via the catalog manager, but also overthere.
And restart your services once...
Hope it helps.
Kr,
A
Maybe you are looking for
-
Hi, I am sending the ALV List through mail. But I am getting the error "MAXIMUM NUMBER OF INTERNAL SESSION REACHED". But without using the mail variant i am able to see the output. Mine mail functionality is not working
-
Newbie question to java web services....
hi, I used to be a .net programmer for a few years, and am have done web services in .net.... (using IIS, of course) And i moved onto Java side recently - and am pretty new to tomcat / axis..etc.. I looked at the netbeans ide tutorial, and it covered
-
Adding a column into existing index
Can I add a column into existing index? or do I need to drop the index and recreate one? Thanks.
-
Permission denied when I execute a unix command from within my java applet.
Hi Gang, Forgive me if this is not the appropriate forum for this problem. I'm posting this problem on this forum since I got no answers on the other forum I posted on. I've written a simple java applet that runs a unix command and then displays some
-
Browse music files by directories- possible?
is this possible ? thanks