Catalog not writable

I just returned from a six-week trip with lots of photos. Used my laptop with an external HD on which I had the trip catalog and files. When I connect the HD to the Desktop and open the trip catalog, I get the message that the catalog cannot be used because it is not writable and cannot be opened. Maybe because of incorrect pemissions or that catalog is being used by another application. Checked the permissions, seems OK, not being used by another application.
Any suggestions
Puzzled and frustrated.
Stan

Deleted lock file. Did not help.
Thanks for the suggestion. After two long chats with Adobe, now I can open the catalog, and the folder, but it shows the files in grid (even with flag and tags) but no photo. Adobe suggests I create new catalog and copy the folders to the new catalog. Perhaps I should just move the external hd catalog and folders to my desktop. Any suggestions?

Similar Messages

  • Lightroom catalog not writable ?

    I am getting this error message "lightroom cannot use the catlog because it is not writable and cannot be opened." My permissions are set correctly and disc doctor finds no errors.  I also have user and admin set correctly.
    what else should I check?
    I have tried copying the catalog to my desktop, and get the same problem. The catalog currently resides on an external drive that is otherwise fine.

    Could it be that your catalogue file is read-only? It shouldn't be.
    Hal

  • I'm not able to open a catalog. It says it is not writable and cannot be opened.

    This has been happening to me for the past few weeks.  If I close my LR5 program and try to re-open the catalog I get a error message that says
    Lightroom cannot use the catalog named "Lightroom 5 Catalog 2014" because it is not writable and cannot be opened.
    This could be caused by incorrect permissions or because another Lightroom application is using the catalog. You may try to correct the problem or you may select a different catalog.
    Then I have the option to choose a different catalog / try again / Exit
    I have to go to the backup every time.  I am currently working in Windows 8.1
    Please help!

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • Why do i get the following message when i attempt to open my backup file for lightroom cc?  "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened".  This message just started coming  up after downloadi

    why do i get the following message when i attempt to open my backup file for lightroom cc?  "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened".  This message just started coming  up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???

    Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
    Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
    Any LRcat file with .lock extension , move it to Desktop.

  • Can't open Lightroom 5.3 catalog. Get  ".. it is not writable and cannot be opened" message.

    Hi everyone,
    I'm having a problem opening a lightroom catalog. I get a message "Lightroom cannot use the catalog because it's not writable and can't be opened".
    The catalog and several thousand RAW files are stored on an external drive.
    Here are the steps which I believe caused the problem:
    1. Worked with the catalog on my PC laptop. Disconnected the drive without closing Lightroom first (big mistake).
    2. Plugged the external drive into desktop PC and did additional work. Closed Ligtroom (on desktop) and disconnected the drive.
    3. Plugged the drive back into the laptop while original catalog was still open (see #1 above). Clicked on an image at which point Lightroom crashed and closed by itself.
    The problem now is that the catalog no longer opens on either computer. Any attempt to open results in  "Lightroom cannot use the catalog because it's not writable and can't be opened" message. There are no lock or journal files that can be deleted, just the lrcat file and tons of folders with preview data.
    I'm hoping that it's not a lost cause and I can still recover the catalog. There are 2 days worth of work there.
    Thank you for any help/advice in advance!

    Ok. I found a solution. Since Ligthroom catalog is a SQLite database, you can use a database tool to fix it. Simply download SQLite from www.sqlite.org for your OS (Windows 7 in my case) and unzip to C:\SQLite for ease of use. Copy your corrupt catalog to C:\SQLite folder as well to keep things simple.
    Go to command prompt Start>Run, type 'cmd' and click Enter. This will open the command prompt where you will need to execute the following commands:
    1. cd sqlite
    2. echo .dump | sqlite3 yourcatalogfilename.lrcat > tempcatalog.sql
    3. sqlite3 -init  tempcatalog.sql  newcatalogfilename.lrcat
    After executing line 3, you may or may not see error messages. No worries, it simply truncated faulty database records which is what cause the catalog to crash.
    Now, copy the newcatalogfilename.lrcat back to your lightroom catalog folder and launch it. You should be able to get things back up and running to where you left of, or to the point where the original Lightroom catalog got corrupted in the first place.
    Hope this helps. It took me a few hours to find a solution, but it saved me at least 2 days of work. The original credit goes to the author of the following article http://www.simplyness.com/more-photography-tips/recover-corrupted-unrepairable-lightroom-3 -catalog-with-sqlite.html. It seemed to have worked for Lightroom 3 and still worked for Lightroom 5.3 in my case.

  • After a power outage, Lightroom won't open.  It says the catalog is not writable and will not open

    How do I get lightroom to open?  It says the catalog is not writable and will not open?

    No, Jim.  I did not know where the backups were!  I've been researching this online, on here, and asking everyone I knew that used lightroom if they had any idea how I could get lightroom to open again. I checked out "permissions" too. Finally, I went to the lightroom folder which was in my PICTURES library and double clicked on "Lightroom 5 Catalog.lrdata" and Lightroom opened up.  I hadn't backed up the images since the 24th so all of those that were edited since then went back to being unedited.  I had already exported them to another folder so I don't have to do anything to those anyway.  Is this lrdata the backup?  I had a couple of people tell me to go to Lightroom and do this and do that, but I couldn't open Lightroom up to do anything at all!  After getting Lightroom back, I got the 5.5 update and everything seems to be back to normal.  I appreciate your help  AND your kindness to someone that hasn't got a clue about computers or how this software works.

  • How do I open an " not writable" catalogue?

    I just upgraded my processor and OS to Windows 7. I reinstalled Lightroom 3. When I try to open a catalogue, I get an error message that it cannot be opened because it is not writable.  Any suggestions?

    There are at least three reasons for that:
    a) You don't have write permission for the drive the catalog sits on. This is a feature in Win 7: for each drive you have to give yourself full permission. Right-click the drive in question, go >Properties >Security tab and highlight your log-on name. You should have check marks for "Full Control", "Modify", and "Write".
    If you don't, click on <Edit>, make sure that you name is highlighted and check the boxes "Full Control", etc.
    BTW you also have to do this for the drive your photos are on, i.e. for every drive that Lr uses (also think Lr cache).
    b) Lr requires enough free space on the hard drive where the catalog sits in order to be able to write to it. If there isn't enough free space left, you ge the message that the catalog is not writeable.
    c) Lock-file: When Lr is open there is a lrcat.lock file that sits right besides your catalog. It prevents that Lr is opened in two instances because that would create problems with the catalog. The lock file should NOT be present when Lr is closed, but sometimes it doesn't disappear for reasons unknown to me. With Lr closed check if you see a lock file (same name as your catalog but with ending "lrcat.lock"). If you do, send it to the Recycle Bin / Trash Can. Don't delete your catalog, the .lrcat file!

  • Some more 'not writable and cannot be opened" . . . one more time . . .

    OK, I give up and need help.  I have all LR 2.6 files and folders on an EHD (F:).  I downloaded the LR 2.6 update to C: drive on my laptop (Vista) and upon the initial opening of the updated LR was able to open one of my two catalogs (.lrcats).  However, upon closing that I am no longer able to access either THAT catalog again OR  the other .lrcat because they are " not writable and cannot be opened".
    I've read a multitude of threads on this problem and either the answers don't apply or I just don't understand what I need to do in order to open the F: lrcats on the laptop C: LR.   Double clicking on the catalogs just brings up the above message. Properties indicates the catalogs are readable and have permissions . . .   (It works perfectly on LR 2.6 on C: on my win xp sp3 desktop.)
    I've tried everything I can think of (which AIN'T much - have always admitted to being computer-challenged).  Any idea what I'm missing?

    Well, is the catalogue (and the folder it is in) writable? Have you actually checked the permissions? Lightroom won't be spitting out the error just to tick you off, and - computer wizard or not - this sounds very much like something you'll have to fix at the OS level: it's probably nothing to do with Lightroom or those funny lads at Adobe.
    Some light reading for you, courtesy of the site search: https://forums.adobe.com/search.jspa?q=%22+not+writable+and+cannot+be+opened%22&place=%2Fp laces%2F1383621&depth=ALL
    It would help to know your OS.

  • Image Capture and Preview "folder not writable" error importing to shared folder

    I'm running 10.8.5 on a Late 2012 model Mac Mini. I'm trying to create a folder under my home directory where my wife can import pictures using Image Capture or Preview while logged into her account. I've tried setting permissions on the folder by setting POSIX permissions and ACLs from the command line, and also by setting ACLs using Get Info in Finder, but it seems as though both Image Capture and Preview ignore the ACLs and instead rely solely on the POSIX permissions for everyone/other (even when a relevant group is set). Unless the POSIX permissions for everyone/other are "rwx" Image Capture and Preview both give an error that the import failed, and /var/log/system.log shows errors that the "folder is not writable". I'd like to be able to set this up without making the folder and the files in it writable by everyone. My understanding was that ACLs should take precedence over POSIX permissions, but even the POSIX permissions don't seem to be getting handled properly, because the group is ignored. Any help or explanation of what's happening would be appreciated.
    Here's an example with details:
    Suppose we have the users alice and bob. We want to set permissions on the directory /Users/bob/importdir such that Alice can import files from a camera there using Image Capture (or Preview, either would do), but don't want to relax the permissions more than necessary.
    We create a group named bob_and_alice
    We set the following permissions on /Users/bob:
    POSIX: rwxr-xr-x, owner=bob, group=staff (i.e. default POSIX permissions)
    ACLs:
    0: group:everyone deny delete
    1: group:bob_and_alice allow list,search,readattr,readextattr,readsecurity
    2: user:alice allow list,search,readattr,readextattr,readsecurity
    "Get Info" shows "Read & Write" for bob and "Read Only" for alice, bob_and_alice, staff, and everyone
    We set the following permissions on /Users/bob/importdir:
    POSIX: rwxrwxr-x owner=bob, group=bob_and_alice
    ACLS: (these are already probably more permissive than should be necessary)
    0: group:bob_and_alice allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,re adextattr,writeextattr,readsecurity,writesecurity,file_inherit,directory_inherit
    1: user:alice allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,re adextattr,writeextattr,readsecurity,writesecurity,file_inherit,directory_inherit
    "Get Info" shows "Custom" for both alice and bob_and_alice, "Read & Write" for bob, and "Read Only" for everyone
    Alice opens a Terminal and cd's to /Users/bob/importdir. Alice can create and delete files in this directory.
    Now Alice opens Image Capture and with our camera connected we try to import a photo to /Users/bob/importdir. Image Capture shows an error dialog with the text "Import error. An error occurred while importing. The item 'foo.jpg' was not imported." /var/log/system.log shows the message: "Jul 20 22:12:34 computer_name.local Image Capture[32804]: Document destination folder is not writable" If instead Alice uses Preview it shows an error dialog with the text "The selected folder is not writable" and /var/log/system.log shows two error messages:
    Jul 20 22:23:45 computer_name.local Preview[33280]: Document destination folder is not writable
    Jul 20 22:23:45 computer_name.local Preview[33280]: Encountered error during image import: Error Domain=com.apple.ImageCaptureCore Code=-9934 "The selected folder is not writable" UserInfo=0x7ffda4881f00 {NSLocalizedDescription=The selected folder is not writable}
    Now we change the POSIX permissions on /Users/bob/importdir to: rwxrwxrwx
    The import succeeds with both Image Capture and Preview
    Can anyone explain what's going on here? Is there another reasonable way to do this without, moving this shared directory to /Users/shared?

    Did you figure out how to fix this?

  • Field Catalog Not Found in ALV

    Hi Experts,
    I am trying to exceute the below code its shows the Field CataLog Not Found
    Code is:
    TYPE-POOLS:slis.
    TABLES:ekpo,mseg.
    TYPES: BEGIN OF ty_ekpo,
           ebeln TYPE ekpo-ebeln,
           ebelp TYPE ekpo-ebelp,
           matnr TYPE ekpo-matnr,
           menge TYPE ekpo-menge,
           END OF ty_ekpo.
    TYPES: BEGIN OF ty_mseg,
           ebeln TYPE mseg-ebeln,
           ebelp TYPE mseg-ebelp,
           matnr TYPE mseg-matnr,
           menge TYPE mseg-menge,
           bwart TYPE mseg-bwart,
           END OF ty_mseg.
    TYPES: BEGIN OF ty_final,
            ebeln TYPE ebeln,
            ebelp TYPE ebelp,
            qtysup TYPE MENGE_D,
            qtyact TYPE MENGE_D,
            qtyrej TYPE MENGE_D,
           END OF ty_final.
    DATA: it_mseg  TYPE  TABLE OF ty_mseg WITH HEADER LINE,
          it_ekpo  TYPE  TABLE OF ty_ekpo WITH HEADER LINE,
          it_final TYPE  TABLE OF ty_final WITH HEADER LINE.
    DATA: wa_fieldcat TYPE slis_fieldcat_alv,
          it_fieldcat TYPE slis_t_fieldcat_alv.
    DATA:wa_mseg LIKE LINE OF it_mseg,
         wa_ekpo LIKE LINE OF it_ekpo ,
         wa_final LIKE LINE OF  it_final.
    SELECT-OPTIONS: p_ebeln FOR ekpo-ebeln.
    START-OF-SELECTION.
    SELECT ebeln ebelp matnr menge FROM ekpo
                                     INTO TABLE it_ekpo
                                     WHERE ebeln IN p_ebeln.
      IF it_ekpo[] IS NOT INITIAL.
        SELECT ebeln ebelp matnr menge bwart FROM mseg
                                                    INTO TABLE it_mseg
                                                    FOR ALL ENTRIES IN it_ekpo[]
                                                    WHERE ebeln EQ it_ekpo-ebeln
                                                    AND   ebelp EQ it_ekpo-ebelp
                                                    AND bwart EQ '122'.
      ENDIF.
      LOOP AT  it_mseg  .
        READ TABLE it_ekpo WITH KEY ebeln = it_mseg-ebeln.
        IF sy-subrc EQ 0.
          it_final-qtyrej = it_mseg-menge.
          it_final-qtysup = it_ekpo-menge.
          it_final-ebeln  = it_mseg-ebeln.
          it_final-ebelp  = it_mseg-ebelp.
        ENDIF.
    IF sy-subrc EQ 0.
          it_final-qtyact = ( it_final-qtysup ) - ( it_final-qtyrej ).
        ENDIF.
        APPEND it_final.
      ENDLOOP.
      wa_fieldcat-fieldname = 'EBELN'.
      wa_fieldcat-tabname   = 'IT_FINAL'.
      wa_fieldcat-seltext_l = 'Purchase Doc'.
      wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
      wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
      wa_fieldcat-col_pos     = 1.
      wa_fieldcat-outputlen   = 10.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname = 'EBELP'.
      wa_fieldcat-tabname   = 'IT_FINAL'.
      wa_fieldcat-seltext_l = 'Item'.
      wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
      wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
      wa_fieldcat-col_pos     = 2.
      wa_fieldcat-outputlen   = 5.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname = 'QTYSUP'.
        wa_fieldcat-tabname   = 'IT_FINAL'.
      wa_fieldcat-seltext_l = 'QuatitySupply'.
      wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
      wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
      wa_fieldcat-col_pos     = 3.
      wa_fieldcat-outputlen   = 13.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname = 'QTYACT'.
        wa_fieldcat-tabname   = 'IT_FINAL'.
      wa_fieldcat-seltext_l = 'QualityAccepted'.
      wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
      wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
      wa_fieldcat-col_pos     = 4.
      wa_fieldcat-outputlen   = 13.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname = 'QTYREJ'.
      wa_fieldcat-tabname   = 'IT_FINAL'.
      wa_fieldcat-seltext_l = 'QualityRejected'.
      wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
      wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
      wa_fieldcat-col_pos     = 5.
      wa_fieldcat-outputlen   = 13.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR wa_fieldcat.
      DATA: repid LIKE sy-repid.
      repid = sy-repid.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
          I_CALLBACK_PROGRAM             = repid
        TABLES
          t_outtab                       = it_final[]
      EXCEPTIONS
        PROGRAM_ERROR                  = 1
        OTHERS                         = 2
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Thanks In Advance
    Poorna

    Hi,
    pass parametrs as it is given below...
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      I_INTERFACE_CHECK              = ' '
      I_BYPASSING_BUFFER             =
      I_BUFFER_ACTIVE                = ' '
      I_CALLBACK_PROGRAM             = repid
      I_CALLBACK_PF_STATUS_SET       = ' '
      I_CALLBACK_USER_COMMAND        = ' '
      I_STRUCTURE_NAME               =
      IS_LAYOUT                      =
      IT_FIELDCAT                    = it_fieldcat
      IT_EXCLUDING                   =
      IT_SPECIAL_GROUPS              =
      IT_SORT                        =
      IT_FILTER                      =
      IS_SEL_HIDE                    =
      I_DEFAULT                      = 'X'
      I_SAVE                         = ' '
      IS_VARIANT                     =
      IT_EVENTS                      =
      IT_EVENT_EXIT                  =
      IS_PRINT                       =
      IS_REPREP_ID                   =
      I_SCREEN_START_COLUMN          = 0
      I_SCREEN_START_LINE            = 0
      I_SCREEN_END_COLUMN            = 0
      I_SCREEN_END_LINE              = 0
      IR_SALV_LIST_ADAPTER           =
      IT_EXCEPT_QINFO                =
      I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER        =
      ES_EXIT_CAUSED_BY_USER         =
      TABLES
        t_outtab                       = it_final[]
    EXCEPTIONS
      PROGRAM_ERROR                  = 1
      OTHERS                         = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Thanks & Regards
    Ashu

  • "Field Catalog not found" ...problem in ALV reporting !!

    Hi,
    When i execute my report program where in I generate a Selection screen, I am able to select the values in the selection screen. Once I click on the execute button I get the message
    "Field Catalog not found"...
    The elabore message is
    "Field Catalog cannot be determined becaus the output table structure name was not specified"
    Where am I wrong ??
    Find below my code ...
    *& Report  Z_MIGO_TXJCD_REPORT
    REPORT  Z_MIGO_TXJCD_REPORT.
    TYPE-POOLS: slis.
    TABLES:  makt,mseg,zmigo_extend,ttxj,mkpf.
    DATA: BEGIN OF migo_data OCCURS 0,
           matnr LIKE mseg-matnr,
           werks LIKE mseg-werks,
           lgpla LIKE mseg-lgpla,
           bwart LIKE mseg-bwart,
           menge LIKE mseg-menge,
           dmbtr LIKE mseg-dmbtr,
           budat LIKE mkpf-budat,
           txjcd LIKE zmigo_extend-txjcd,
          END OF migo_data.
    DATA: it_cat TYPE slis_t_fieldcat_alv,
          wa_lay TYPE slis_layout_alv.
    FIELD-SYMBOLS: <fs_cat> LIKE LINE OF it_cat.
    SELECT-OPTIONS: so_matnr FOR makt-matnr,
                    so_budat FOR mkpf-budat,
                    so_werks FOR mseg-werks,
                    so_lgpla FOR mseg-lgpla,
                    so_bwart FOR mseg-bwart,
                    so_txjcd FOR ttxj-txjcd.
    START-OF-SELECTION.
      SELECT amatnr awerks algpla abwart
             amenge admbtr bbudat ctxjcd INTO TABLE
             migo_data
        FROM mseg AS a INNER JOIN mkpf AS b ON amblnr = bmblnr INNER JOIN
             zmigo_extend AS c ON amblnr = cmblnr
       WHERE a~matnr IN so_matnr
         AND b~budat IN so_budat
         AND a~werks IN so_werks
         AND a~lgpla IN so_lgpla
         AND a~bwart IN so_bwart
         AND c~txjcd IN so_txjcd.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
        EXPORTING
          i_program_name         = sy-cprog
          i_internal_tabname     = 'migo_data'
          i_inclname             = sy-cprog
        CHANGING
          ct_fieldcat            = it_cat
        EXCEPTIONS
          inconsistent_interface = 1
          program_error          = 2
          OTHERS                 = 3.
      LOOP AT it_cat ASSIGNING <fs_cat>.
        CLEAR <fs_cat>-key.
      ENDLOOP.
      wa_lay-zebra = 'X'.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_grid_title  = 'MIGO report with Tax Jurisdiction Code'
          is_layout     = wa_lay
          it_fieldcat   = it_cat
        TABLES
          t_outtab      = migo_data
        EXCEPTIONS
          program_error = 1
          OTHERS        = 2.

    Give 'migo_data' in uppercase as ''MIGO_DATA'.

  • Error ,Field catalog not found while doing billing with DP90

    Dear Guru's
    while doing billing with DP90 transaction code.i have given service order no xxxx and execute.Then i received the below error
    Field catalog not found , Message no. 0K530.Kindly help me in solving the issue.
    Thank u
    S Babu

    hi naga suribabu,
    I am also facing same issue. can you please help, where to  check the configuration for this issue

  • OCI Catalog for Vendor problem : Logical system for catalog not maintained

    We have set up an OCI catalog with on of our vendors. This works fine untill we transfer shopping basket data from Vendor sysem into our SRM-system (SRM5.0). Then data is not being transfered and Vendor Webshop screen remains 'open'.
    in SLG1 i have found an error "Logical system for catalog not maintained. Inform system administrator'
    Anyone an idea what the cause of this error can be or what we need to check ?
    Thanks in advance

    Hi,
    I have not seen that error before. However, I think it may have to do with the LOGICAL_SYSTEM OCI field. Can you check if your punch-out catalog vendor is populating that field? Also, check if you have the correct BP# populated in the catalog configuration and the LOGICAL SYSTEM Field on the define External Webservices is blank.
    SG

  • Field catalog not found...

    hi all,
    when i try to create billing request for a service order (using dp90), i am getting the following message :
    Field catalog not found
        Message no. 0K530
    Diagnosis
        The field catalog cannot be determined because the output table
        structure name was not specified.
    what can i do?

    I assume this error happens when you save the billing document, and it is a billing output issue. As said, you could verify this by removing all outputs before saving, and afterwards in change mode add them again one by one to figure out which is failing. Alternatively use the blue i icon to analyze the outputs.
    Transaction NACE can be used for output setup across all modules. If the assumption regarding billing is correct, we are dealing with application V3. Mark this in the left side. Press 'output types' button and check the output types you saw in the billing document by double clicking. On the 'General data' is the access sequence assigned. Double click that. Probably will multiple output types be attached to the same access sequence. Mark the access sequence, and unfold the 'Accesses' to the left. Check out the condition tables in the Tab column. All condition tables below 599 is standard and probably OK. Note down the high numbers.
    Go back to the initial screen of NACE. With the application (V3) marked, select EDIT - CONDITION TABLES in the menu.
    Check each of the used condition tables here. Use utilities - Generate in the menu. Mark all boxes and execute. You can even select the entire range 500-999 at one time if you prefer. At least one condition table should give errors in the generation.

  • Cisco ISE with AD Problem: "Could not read groups data: Global catalog not found"

    Hi all,
    When I make the ActiveDirectory integration with Cisco ISE, I have complete with this integration. but when I try to read the Groups from Active Directory, ISE shows the message "Could not read groups data: Global catalog not found".
    My Domain has multiple sites and subnets, each contains GC for local logon. I have set ISE to the correct site and subnet. Forward and Reverse DNS are working with no error.
    Does anyone get this problem, please help.
    I have check into the ISE CLI Reference Guide 1.1.x
    You are about to configure Active Directory settings.
    Are you sure you want to proceed? y/n [n]: y
    Parameter Name: dns.servers
    Parameter Value: 10.77.122.135
    Active Directory internal setting modification should only be performed if approved by ISE
    support. Please confirm this change has been approved y/n [n]: y
    What shoud I set in the Parameter Name ? dns.servers or my dns hostname ?
    Please suggest for this too.
    Thanks and Regards,
    Pongsatorn M.

    Hi Pongsatorn,
    Thanks for the reply!
    I've attached the results of the ISE detailed AD test. As you can see, there is a fair number of domain controllers in the AD forest.
    It seems everything works correctly until it gets to testing the AD connectivity on port 3268. Then I get this:
      Testing Active Directory connectivity:
        Global Catalog: pdascdc02.xyz.com
          gc:       3268/tcp - refused
      Testing Active Directory connectivity:
        Global Catalog: pdascdc02.xyz.com
          gc:       3268/tcp - refused
    For some reason, the request to the controllers on port 3268 is being refused.
    Any thoughts you might have are greatly appreciated.
    Cheers,
    Greg

Maybe you are looking for