Catalog PSE and LR

Are the LR and PSE Catalogues connected?
I cannot move PSE catalog because it tells me it is in use by another program.
I have some files in PSE that came from LR that I got on trial that expired.
What can I do?
Thanks.

No the catalogs are separate although from the Library module you can click File à Upgrade Photoshop Elements Catalog.
Most people use Lightroom as their primary raw editor but with Elements or CS6 set up as the external Editing app to do some of the more fancy stuff involving layers and masks. The initial image is sent to Elements as a PSD or Tiff together with the Lightroom Develop settings but the results after further editing in PSE are saved back to the Lightroom Library.
You normally make the round trip from Lightroom as follows:
1) Ctrl+E in the Library to export with develop settings
2) Edit in Elements; then Ctrl+S to overwrite Lightroom export copy
3) Ctrl+W to close in Elements and update Lightroom thumbnail.

Similar Messages

Having corrected my corrupt catalog (PSE 11) I now have thousands of duplicate images. Is there any way of of removing the extra copies? I've had suggestions that apply to Windows, and iPhoto but can't find any advice for Photoshop Elements on Mac Maveric

Having corrected my corrupt catalog (PSE 11) I now have thousands of duplicate images. Is there any way of of removing the extra copies? I've had suggestions that apply to Windows, and iPhoto but can't find any advice for Photoshop Elements on Mac Maverick

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Does PSA3 SE have Catalog Recover and Reconnect Missing Files

Hi Jim Jutte and Colin Walls,
I was looking at this thread over on the PS Elements forum where the submitter seems to have some problems where he thinks that some photo files did not transfer from PSA3 SE to PSE 5.
http://www.adobeforums.com/cgi-bin/webx/.3bc1dc66
I suggest that you also look at this thread. I don't have PSA3 SE to know what functions it does or does not have. If PSA3 SE does have Catalog Recover and Reconnect Missing Files, can he go back to his PSA3 SE Catalog now and do the Reconnect Missing Files and Catalog Recover, then retry the catalog upgrade again in PSE5?

Colin,
It's been a while since I'm used any bells and whistles in Access. What is
the function called?
Cheers

In adobe pse and nikon nx2, I open 2 images, select in 1 a head, copy, open image 2 and paste, than only the outlines of the selection apears but no head. who knows this problem?

in adobe PSE and in Nion NX2, I open 2 group Photos, select a head in photo 1 and copy, go to photo 2 and paste. Than only the selection-line
appears and no head is visible! Who can tell me what is going wrong? Thanks: Max.

I am sorry to have to point out to you that you have changed SpryMenuBasicSkin.css so much that it is impossible to render any assistance.
To start with, the menubar has an ID of MenuBar, yet in the CSS I only see this referenced as a CLASS as in
.MenuBar {
background-color:#cccccc;
font-family: Arial, Helvetica, sans-serif; /* Specify fonts on on MenuBar and subMenu MenuItemContainer, so MenuItemContainer,
MenuItem, and MenuItemLabel
at a given level all use same definition for ems.
Note that this means the size is also inherited to child submenus,
so use caution in using relative sizes other than
100% on submenu fonts. */
font-weight: normal;
font-size: 16px;
font-style: normal;
padding:0;
border-color: #ffffff #ffffff #ffffff #ffffff;
border-width:0px;
border-style: none none none none;
I would suggest to start again.
Once you have done that, supply a link to your site and we will assist you further.
Gramps

Cannot open Catalog Manager and Job Manager on Windows 7 (11.1.1.6.2 BP1)

Hi,
We recently upgraded to OBIEE version 11.1.1.6.2 BP1 and installed Client tools from the same version (downloaded from Oracle Support). Once installed, ODBC connections are created to connect to the BI Server and we are able to connect to BI Server using Administration Tool. But Catalog Manager and Job Manager are not opening.
Is there any setup missing to make Catalog Manager and Job Manager work?
Thanks in advance.

Hi,
It is a known bug. Please find the solution here.
http://123obi.com/2013/02/unable-to-open-catalog-manager-obiee-11g/
Cheers,
Kalyan Chukkapalli
http://123obi.com

Aero Problems on Win 7 With PRE, PSE and OE

I am using nVideo GeForce GTS 8800 (rev 8.17.12.9573 2/9/2012) and having trouble with Aero on PRE, PSE and OE version 10 and a dual monitor system. The problems are numerous and involve trying to resize windows and display resolutions with these products. My question is: Do products these fully support the Aero display modes? The problems don't show up on any other products such as BLENDER, VLC, GIMP etc. and other proprietary and GPL products.

Hi,
PSE shows the fewest problems, in minimum mode try expanding the window by clicking at the top (of PSE) and dragging up or down. The arrow should change to double sided and you should be able to expand or contract the window. Try it on another app. It should work okay (window expands or contracts). Also the top of the window should be translucent to be compliant with Aero (so should PRE and OE be translucent at the top).
I could live with that; but if I try to maximize the OE window in the left monitor, I only get one half of OE. The other half is off the left side of monitor.
The biggest problem is that PRE does not maximize in a 1920 x 1080 monitor; it goes back to the right monitor in 1280 x 720 res. mode. ALL of the other Windows (non Adobe) apps do work all right even BLENDER and VLC which are GPL. This means that I can't run PRE at higher res. which is a major advantage for a video editing app.
It appears that these programs from Adode may not be using the Microsoft Windows API calls, that the other Windows programs use to resize. If this is the case; it shows sloppy programming techniques.
I do have latest drivers from nVideo.
I hope that this clear; it is a little complicated. Anyhow, thanks for your interest and for giving me the opportunity to vent my frustration.
John H

Web Catalog Patching and repository patching in OBIEE 11G

Hi
Please share pointers for Web Catalog Patching and repository patching using command line in BI EE 11g.
Thanks
Edited by: user8654742 on Sep 20, 2011 11:39 PM

Hi Deepak,
When I am running the following command "./runcat.sh -cmd diff -baseline /home/oracle/SampleAppBaseline -latest /home/oracle/SampleAppChanged -outputFile /home/oracle/SampleAppDiff.txt -folder /shared -verbosity detail" in command line it is erroring out as follows : "'.' is not recognized as an internal or external command,operable program or batch file." . Is there any other way to run this command? Please help to overcome this issue.
Thanks.

Converting P12 to PSE and uploading in STRUST on ABAP

Hi Team,
We need some help from the experts.
We have a p.12 certificate of our PI/XI system from the Java stack which we need to convert to PSE and upload to strust on the ABAP side.
We are trying with sapgenpse but unable to convert from p12 to pse but unable to do so.
Is there any possibility of converting p12 to PSE and upload in strust? If yes, what command should we use to generate the same via sapgenpse?
Thanks
Rajeet
+41 76 525 0440

Hi Juan,
Below is the error I am getting
C:\Misc\ntintel>sapgenpse import_p12 -p c:\misc\cert\Payment.p12 c:\misc\cert\Payment.pse
import_p12: ERROR -- stat(Payment) failed: No such file or directory
I tried with quotes as well.
The file Payment.p12 do exist in my folder c:\misc\cert
Not sure why I am getting this error.
Thanks again for your help.
Rajeet

PSE and Nik Collection of Plug-ins

Has anyone running PSE and using the Nik Collection of plug-ins experienced any sudden problems with a missing .dll file?
Yesterday, I was unable to open up PSE due to a missing .dll file. After hours of trying to figure out the problem, I inadvertently realized it was the Nik Collection that was the problem and re-installing it solved the problem.
This morning, same error message once again and when I by-passed it and got into PSE the Nik Collection was not showing under “filters” although it was yesterday after the problem was solved. So, I uninstalled the Nik Collection and re-installed it and everything is good now.
Clearly, there is some sort of issue with the Nik plug-ins –anyone else having this problem?

Hi,
You can try this.
1. Launch PSE
2. Go to Edit -> Preferences -> Plugins
3. In the Additional Path, Provide the path of the Bokeh Plugin
4. Click OK
5. Relaunch PSE
I hope, it should work now.
Thanks,
Tarun

Invalid objects after running catalog.sql and catproc.sql

I have a db 10.1.0.3.0. standard edition with the 10.1.0.4.0 patch installed.
After executing catalog.sql and catproc.sql the database contains lots of invalid objects in the public, olapsys and xdb schemas.
I have executed utlrp.sql, the script completes successfully, but lots of invalid objects remain.
Does anyone know how to fix this?
Thanks in advance.
Below is the output of
select owner, object_name, object_type from dba_objects where status like 'INVALID';
OWNER OBJECT_NAME OBJECT_TYPE
XDB DBMS_XDBUTIL_INT PACKAGE
XDB SETMODFLG PROCEDURE
XDB DBMS_XDBZ0 PACKAGE BODY
XDB DBMS_XDBUTIL_INT PACKAGE BODY
PUBLIC DBMS_XDBUTIL_INT SYNONYM
XDB XDB$PATCHUPSCHEMA PROCEDURE
OLAPSYS ALL$OLAP2_AW_CATALOGS VIEW
PUBLIC ALL_OLAP2_AW_CATALOGS SYNONYM
OLAPSYS ALL$OLAP2_AW_CATALOG_MEASURES VIEW
PUBLIC ALL_OLAP2_AW_CATALOG_MEASURES SYNONYM
OLAPSYS ALL$OLAP2_AW_PHYS_OBJ VIEW
PUBLIC ALL_OLAP2_AW_PHYS_OBJ SYNONYM
OLAPSYS ALL$OLAP2_AW_PHYS_OBJ_PROP VIEW
PUBLIC ALL_OLAP2_AW_PHYS_OBJ_PROP SYNONYM
OLAPSYS ALL$OLAP2_AW_DIMENSIONS VIEW
PUBLIC ALL_OLAP2_AW_DIMENSIONS SYNONYM
OLAPSYS ALL$OLAP2_AW_ATTRIBUTES VIEW
PUBLIC ALL_OLAP2_AW_ATTRIBUTES SYNONYM
OLAPSYS ALL$OLAP2_AW_CUBES VIEW
PUBLIC ALL_OLAP2_AW_CUBES SYNONYM
OLAPSYS ALL$OLAP2_AW_CUBE_DIM_USES VIEW
PUBLIC ALL_OLAP2_AW_CUBE_DIM_USES SYNONYM
OLAPSYS ALL$AW_DIM_ENABLED_VIEWS VIEW
PUBLIC ALL_AW_DIM_ENABLED_VIEWS SYNONYM
OLAPSYS ALL$AW_CUBE_ENABLED_VIEWS VIEW
PUBLIC ALL_AW_CUBE_ENABLED_VIEWS SYNONYM
OLAPSYS ALL$AW_CUBE_ENABLED_HIERCOMBO VIEW
PUBLIC ALL_AW_CUBE_ENABLED_HIERCOMBO SYNONYM
OLAPSYS ALL$OLAP2_AW_DIM_LEVELS VIEW
PUBLIC ALL_OLAP2_AW_DIM_LEVELS SYNONYM
OLAPSYS ALL$OLAP2_AW_DIM_HIER_LVL_ORD VIEW
PUBLIC ALL_OLAP2_AW_DIM_HIER_LVL_ORD SYNONYM
OLAPSYS ALL$OLAP2_AW_CUBE_MEASURES VIEW
PUBLIC ALL_OLAP2_AW_CUBE_MEASURES SYNONYM
OLAPSYS ALL$OLAP2_AW_CUBE_AGG_SPECS VIEW
PUBLIC ALL_OLAP2_AW_CUBE_AGG_SPECS SYNONYM
OLAPSYS ALL$OLAP2_AW_CUBE_AGG_MEAS VIEW
PUBLIC ALL_OLAP2_AW_CUBE_AGG_MEAS SYNONYM
OLAPSYS ALL$OLAP2_AW_CUBE_AGG_LVL VIEW
PUBLIC ALL_OLAP2_AW_CUBE_AGG_LVL SYNONYM
OLAPSYS ALL$OLAP2_AW_CUBE_AGG_OP VIEW
PUBLIC ALL_OLAP2_AW_CUBE_AGG_OP SYNONYM
OLAPSYS MRAC_OLAP2_AW_DIMENSIONS_V VIEW
OLAPSYS MRAC_OLAP2_AW_CUBES_V VIEW
OLAPSYS MRAC_OLAP2_AW_CUBE_MEASURES_V VIEW
PUBLIC MRV_OLAP2_AW_DIMENSIONS SYNONYM
PUBLIC MRV_OLAP2_AW_CUBES SYNONYM
PUBLIC MRV_OLAP2_AW_CUBE_MEASURES SYNONYM
OLAPSYS CWM2_OLAP_METADATA_REFRESH PACKAGE BODY
OLAPSYS OLAP_SYS_AW_ACCESS_DIM_VIEW VIEW
OLAPSYS OLAP_SYS_AW_ACCESS_CUBE_VIEW VIEW
OLAPSYS OLAP_SYS_AW_ENABLE_ACCESS_VIEW VIEW
PUBLIC OLAP_SYS_AW_ACCESS_CUBE_VIEW SYNONYM
PUBLIC OLAP_SYS_AW_ACCESS_DIM_VIEW SYNONYM
PUBLIC OLAP_SYS_AW_ENABLE_ACCESS_VIEW SYNONYM
OLAPSYS CWM2_OLAP_OLAPAPI_ENABLE PACKAGE BODY
OLAPSYS DBMS_AWM PACKAGE BODY
OLAPSYS CWM2_OLAP_CUBE PACKAGE BODY

This note explains 80% of the problem: 42 invalid objects are normal, I have 52 invalid objects.
I have re-executed the catpatch.sql script, I couldn't find any errors in the output. At the end Oracle Intermedia and Oracle Expression Filter remain invalid.
last lines of catpatch.sql output:
COMP_NAME STATUS VERSION
OLAP Analytic Workspace OPTION OFF 10.1.0.3.0
Oracle OLAP API OPTION OFF 10.1.0.3.0
Oracle Database Catalog Views VALID 10.1.0.4.0
Oracle Database Packages and Types VALID 10.1.0.4.0
JServer JAVA Virtual Machine VALID 10.1.0.4.0
Oracle XDK VALID 10.1.0.4.0
Oracle Database Java Packages VALID 10.1.0.4.0
Oracle XML Database VALID 10.1.0.4.0
Oracle interMedia INVALID 10.1.0.4.0
Oracle Text VALID 10.1.0.4.0
Oracle Ultra Search VALID 10.1.0.4.0
Oracle Expression Filter INVALID 10.1.0.4.0
Oracle Enterprise Manager VALID 10.1.0.4.0
Oracle Workspace Manager VALID 10.1.0.2.0
Oracle Data Mining OPTION OFF 10.1.0.3.0
OLAP Catalog OPTION OFF 10.1.0.3.0
Spatial OPTION OFF 10.1.0.3.0
SQL> select owner, object_name, object_type from dba_objects where status like 'INVALID';
OWNER OBJECT_NAME OBJECT_TYPE
WK_TEST BIN$9oUB6zbaOP/gMCzPA4J5+w==$0 TRIGGER
OLAPSYS ALL$OLAP2_AW_CATALOGS VIEW
PUBLIC ALL_OLAP2_AW_CATALOGS SYNONYM
OLAPSYS ALL$OLAP2_AW_CATALOG_MEASURES VIEW
PUBLIC ALL_OLAP2_AW_CATALOG_MEASURES SYNONYM
OLAPSYS ALL$OLAP2_AW_PHYS_OBJ VIEW
PUBLIC ALL_OLAP2_AW_PHYS_OBJ SYNONYM
OLAPSYS ALL$OLAP2_AW_PHYS_OBJ_PROP VIEW
PUBLIC ALL_OLAP2_AW_PHYS_OBJ_PROP SYNONYM
OLAPSYS ALL$OLAP2_AW_DIMENSIONS VIEW
PUBLIC ALL_OLAP2_AW_DIMENSIONS SYNONYM
OLAPSYS ALL$OLAP2_AW_ATTRIBUTES VIEW
PUBLIC ALL_OLAP2_AW_ATTRIBUTES SYNONYM
OLAPSYS ALL$OLAP2_AW_CUBES VIEW
PUBLIC ALL_OLAP2_AW_CUBES SYNONYM
OLAPSYS ALL$OLAP2_AW_CUBE_DIM_USES VIEW
PUBLIC ALL_OLAP2_AW_CUBE_DIM_USES SYNONYM
OLAPSYS ALL$AW_DIM_ENABLED_VIEWS VIEW
PUBLIC ALL_AW_DIM_ENABLED_VIEWS SYNONYM
OLAPSYS ALL$AW_CUBE_ENABLED_VIEWS VIEW
PUBLIC ALL_AW_CUBE_ENABLED_VIEWS SYNONYM
OLAPSYS ALL$AW_CUBE_ENABLED_HIERCOMBO VIEW
PUBLIC ALL_AW_CUBE_ENABLED_HIERCOMBO SYNONYM
OLAPSYS ALL$OLAP2_AW_DIM_LEVELS VIEW
PUBLIC ALL_OLAP2_AW_DIM_LEVELS SYNONYM
OLAPSYS ALL$OLAP2_AW_DIM_HIER_LVL_ORD VIEW
PUBLIC ALL_OLAP2_AW_DIM_HIER_LVL_ORD SYNONYM
OLAPSYS ALL$OLAP2_AW_CUBE_MEASURES VIEW
PUBLIC ALL_OLAP2_AW_CUBE_MEASURES SYNONYM
OLAPSYS ALL$OLAP2_AW_CUBE_AGG_SPECS VIEW
PUBLIC ALL_OLAP2_AW_CUBE_AGG_SPECS SYNONYM
OLAPSYS ALL$OLAP2_AW_CUBE_AGG_MEAS VIEW
PUBLIC ALL_OLAP2_AW_CUBE_AGG_MEAS SYNONYM
OLAPSYS ALL$OLAP2_AW_CUBE_AGG_LVL VIEW
PUBLIC ALL_OLAP2_AW_CUBE_AGG_LVL SYNONYM
OLAPSYS ALL$OLAP2_AW_CUBE_AGG_OP VIEW
PUBLIC ALL_OLAP2_AW_CUBE_AGG_OP SYNONYM
OLAPSYS MRAC_OLAP2_AW_DIMENSIONS_V VIEW
OLAPSYS MRAC_OLAP2_AW_CUBES_V VIEW
OLAPSYS MRAC_OLAP2_AW_CUBE_MEASURES_V VIEW
PUBLIC MRV_OLAP2_AW_DIMENSIONS SYNONYM
PUBLIC MRV_OLAP2_AW_CUBES SYNONYM
PUBLIC MRV_OLAP2_AW_CUBE_MEASURES SYNONYM
OLAPSYS CWM2_OLAP_METADATA_REFRESH PACKAGE BODY
OLAPSYS OLAP_SYS_AW_ACCESS_DIM_VIEW VIEW
OLAPSYS OLAP_SYS_AW_ACCESS_CUBE_VIEW VIEW
OLAPSYS OLAP_SYS_AW_ENABLE_ACCESS_VIEW VIEW
PUBLIC OLAP_SYS_AW_ACCESS_CUBE_VIEW SYNONYM
PUBLIC OLAP_SYS_AW_ACCESS_DIM_VIEW SYNONYM
PUBLIC OLAP_SYS_AW_ENABLE_ACCESS_VIEW SYNONYM
OLAPSYS CWM2_OLAP_OLAPAPI_ENABLE PACKAGE BODY
OLAPSYS DBMS_AWM PACKAGE BODY
OLAPSYS CWM2_OLAP_CUBE PACKAGE BODY
53 rows selected.

How to sync new catalog , categories and products created in ACC to pub db

Hi all,
I have created new catalogs+categories and some sample products in my ATG application using ACC. I can access them in my application.
Now i want to move ahead and create some promotions + scenarios for those products. I went through the docs and got that recommended approach is to use BCC for these items and then deploy them to prod instance.
But before that since the newly added catalogs and products are available only with prod db, i should sync them up with my pub db. so that both of my db will be in sync. I tried to look help/steps for this but did not get any.
Can you pl provide some pointers about this, how can i do that? Any link/site for the required steps will definitely help me.
Thanks in advance,
Swati

Hi Grado ,
I doing first step, but when entering password and drp port on acc window it saying-
Could not connect to URL: rmi://localhost:8852/atg/devtools/UpdateAgent
Either the dynamo Server is not running ,or the hostname and/or port number are invalid
please tell me anything i doing wrong.
Thanks.
-Kakasaheb.

How do I transfer my catalog, files and collections into Lightroom 4 onto another computer?

How do I transfer my catalog, files and collections into Lightroom 4 onto another computer?

You can copy your image file from you PC to your Mac over your home network or via DVD/CD. You can not install you PC CS5.1 version on you Mac. Its not compatible with MAC OS. You would need a MAC version of CS5.1 and Mac version serial number to activate it. Adobe no longer markets CS5 so you most likely will not be able to pay for a platform switch media install.

One 8i instance and two rman catalogs 8i and 8

Can I have a single 8i instance for RMAN only with two catalogs, one for 8i and one for 8.0?

Robert,
Yes you can use a single database for 2 recovery catalogs. You can create 2 different schemas for each RMAN catalog version and each of those schemas can hold a different version of the RMAN catalog.
The only reason I can think that you would need 2 different catalogs is because you have an 8.1.X target and a 8.0.5 target? If so, make sure to have the RMAN catalog be the latest 8.1.x release.
In general, the rules of RMAN compatibility are as follows:
o The RMAN catalog schema version should be greater than or equal to the catalog database version. See "Note 1: 8.1 or Later Catalog Schemas in 8.0 Catalog Databases".
o The RMAN catalog is backwards compatible with target databases from earlier releases. See "Note 2: 8.1 or Later Catalog Schemas and 8.0 Target Databases".
o The versions of the RMAN executable and the target database should be the same.
Note 1: 8.1 or Later Catalog Schemas in 8.0 Catalog Databases
RMAN cannot create release 8.1 or later catalog schemas in 8.0 catalog databases.
Note 2: 8.1 or Later Catalog Schemas and 8.0 Target Databases
Restore operations for an 8.0.4 or 8.0.5 target with an 8.1 or later catalog schema do not work when both these conditions are met:
The target database is mounted or open
You are connected to a recovery catalog
If any of these conditions is not met, then you can use an 8.1 or later catalog schema with an 8.0.4 or 8.0.5 target database.
Note 3: 8.1.6 Catalog Schema and Pre-8.1.6 RMAN Executable
Using a pre-8.1.6 release of the RMAN executable with recovery catalog schema of release 8.1.6.0 or 8.1.6.1 (newly created by 8.1.6 RMAN executable using the CREATE
CATALOG command) requires the following update at the catalog database:
SQL> UPDATE CONFIG SET VALUE='080004' WHERE NAME='COMPATIBLE';
null

Will catalog item and ERP contract be in synch?

Dear Experts,
Could you please comment if the SRM-MDM catalog item and ERP contract will be in synch? Our client has the below business process:
At the end of the RFx process, the system will create a central contract in the SAP SRM system. Now, the central contract will be distributed to the ERP MM system. Once the contract is created in the backend ERP MM system, the contract will be pushed to SRM MDM catalog from ERP MM system by MECCM transaction code.
Now, the catalog contract item is used in the shopping cart. Will the shopping cart item quantity get offset in the ERP MM contract?
I hope, if the ERP MM contract quantity gets offset, it will update the central contract in SAP SRM as well.
I appreciate your input and comments.
Thanks and regards,
Ranjan
Ranjan Sutradhar

HI,
When ever a contract is uploaded to SRM MDM catalog and if this item is used in your SC from the catalog, your PO will have the contract price. Once the PO is order there will be a call off performed on the contract.
Hence whenever the ERP contract has a call off, automatic call off on the SRM cenrtal contract will also be performed.
Regards
Sam
Edited by: Sam Chacko Ninan on Nov 8, 2011 11:01 AM

Catalog.sql and Catproc.sql

Hi,
Can anyone please explain the syntax to execute these two packages? Please provide an example. Im creating a recovery catalog database and I have to run these before I am able to access my views such as RC_Database. I ran the create catalog at the RMAN prompt but still I cannot access the RC_views. My hair is falling out with my help. :)
Thanks for your help in advance.
Al

Hi Thomas,
I ran the scripts as you said with out error. Now when I re booted then at the sql prompt check to see if the views exist, they do when I type this query:
sql>SELECT * FROM ALL_CATALOG WHERE OWNER='RMAN';
RESULT PRODUCES A TABLE NAMED RC_DATABASE among others such as RC_REDO_LOG,RC_DATAFILE, etc
But when I go to query this view
sql>SELECT * FROM RC_DATABASE;
I get the following
RESPONSE: table or view does not exist
Any ideas on how to extract the information from this view? What am I doing wrong?
Thanks for your help.
Al

Catalog PSE and LR

Similar Messages

Maybe you are looking for