CATALOG PSE6 failed to convert
After installing PrEl7 complete, I uninstalled it and reinstalled PrE7 minimal, to save space. Installation went fine, but catalog from PSE6 failed to convert, unlike the first time. What are my options?
>How can I start a video-only catalog in this shaky PrE7
1- Please search your hard drive and check if you have any file with the pse7db file type? (be sure to have hidden files visible when you are searching) If yes, post the folder in which you find it and what its last modified and creation dates are on the pse7db file.
2- Are you using a PSE 6 catalog with the default name of "My Catalog" or have you created a catalog with your own name? Also do you use the default or a custom location for the PSE 6 catalog? Are you running XP or Vista?
the following are more general comments so I have separated them from the above specific response :
>as Barb confirmed, the catalog will not convert from PSE6. Why did it convert a few months ago?? The technology must be in flux. Or is something missing in the short version?
Based on what you reported it would seem that the conversion support may not be in the minimal/short version. I don't know for sure and I think that you might need to ask that question to Adobe tech support.
>I do have a PSE7 upgrade but chose not to install it so far, and now that the catalog permanence has been endangered again, probably to promote upgrade sales, my hesitation escalates.
I do think that it would be better to discuss this part of your question over in the PSE forum. I don't understand why you think that catalog permanence is endangered again: I do not agree with that conclusion. Upgrading a catalog is a normal activity when going to a new version of Photoshop Elements and now also Premiere Elements. I also started with Photoshop Album 2.
Now I realize that the upgrade from PSA 2 to PSA 6 was difficult and it has been difficult for other people too. I do think that Adobe should have been better at anticipating that people would be converting from PSA 2 to PSE 6 (for Vista support as well as for other reasons).
You have cleaned up your catalog so to do the upgrade from a PSE 6 catalog to a PSE 7 catalog should be much simpler. Personally, I have more confidence in Photoshop Elements 7 and the PSE 7 catalog than I do in version 6.
Similar Messages
-
I tried to a restore of database from one host to another host. During this process, I am getting Catalog Update failed, Duplicate secondary key: INDEX0.
2011-07-11 17:50:01 6169 53070 SAVPOINT B20PREPARE_SVP: 59
2011-07-11 17:50:01 6169 20008 Pager SVP(3) Start Write Data
2011-07-11 17:50:02 6169 20009 Pager SVP(3) Stop Data IO, Pages: 2 IO: 2
2011-07-11 17:50:02 6169 20010 Pager SVP(3) Start Write Converter
2011-07-11 17:50:02 6169 20011 Pager SVP(3) Stop Converter IO, Pages: 2 IO: 2
2011-07-11 17:50:02 6169 53071 SAVPOINT B20SVP_COMPLETED: 59
2011-07-11 17:50:02 6940 20039 Admin Kernel state: 'REDO LOG' finished
2011-07-11 17:50:02 6940 54000 OBJECT /sapdbQ/SCB/db/lib/lib64/liboms
2011-07-11 17:50:02 6940 ERR 5 Catalog Catalog update failed,IFR_ERROR=250,DESCRIPTION=POS(1) Duplicate secondary key:INDEX0
01
2011-07-11 17:50:02 6940 3 Admin Database state: OFFLINE
2011-07-11 17:50:02 6940 11560 COMMUNIC Releasing T47
2011-07-11 17:50:02 6940 12696 DBSTATE Change DbState to 'SHUTDOWN'(25)
+++++++++++++++++++++++++++++++++++++++ Kernel Exit ++++++++++++++++++++++++++++
2011-07-11 17:50:03 0 12845 DBSTATE Kernel exited normal
2011-07-11 17:50:03 0 12808 DBSTATE Flushing knltrace pages
2011-07-11 17:50:03 0 11560 COMMUNIC Releasing T15
2011-07-11 17:50:03 0 12696 DBSTATE Change DbState to 'OFFLINE '(29)
--------------------------------------- current write position -----------------
How to resolve this?
Thanks and Regards,
GiridharaI tried to drop and re-create GKD database as well. But the same error repeats.
Edited by: Giridhara Tadikonda on Jul 12, 2011 4:16 AM -
"Catalog launch failed" using PSE 5 on Windows 7
I loaded PSE 5 on a new Windows 7 computer and was in process of transferring catalog from old computer to new one using external hard drive with backedup files. I was able to restore the files successfully to the new hard drive on the new computer (using the Restore Catagog function in the organizer). But now the Organizer will not open in PSE 5 - I get a pop-up window "Catalog launch failed". I also reinstalled PSE 5 to see if that would help, but same behavior continued. Anyone have suggestions to help? Thanks.
Thanks for the suggestions. Tried the first option - didn't work. Was planning to also upgrade to PSE 8 - so installed that and was able to convert the catalog to PSE 8 so now things are working well on PSE 8.
-
Conversion failed when converting date and/or time from character string
Hi experts,
I'm trying running a query in Microsoft Query but it gives the following error message:
"conversion failed when converting date and/or time from character string"
when asks me the data I'm inserting 31-01-2014
i've copy the query form the forum:
SELECT T1.CardCode, T1.CardName, T1.CreditLine, T0.RefDate, T0.Ref1 'Document Number',
CASE WHEN T0.TransType=13 THEN 'Invoice'
WHEN T0.TransType=14 THEN 'Credit Note'
WHEN T0.TransType=30 THEN 'Journal'
WHEN T0.TransType=24 THEN 'Receipt'
END AS 'Document Type',
T0.DueDate, (T0.Debit- T0.Credit) 'Balance'
,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')<=-1),0) 'Future'
,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=0 and DateDiff(day, T0.DueDate,'[%1]')<=30),0) 'Current'
,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>30 and DateDiff(day, T0.DueDate,'[%1]')<=60),0) '31-60 Days'
,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>60 and DateDiff(day, T0.DueDate,'[%1]')<=90),0) '61-90 Days'
,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>90 and DateDiff(day, T0.DueDate,'[%1]')<=120),0) '91-120 Days'
,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=121),0) '121+ Days'
FROM JDT1 T0 INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode
WHERE (T0.MthDate IS NULL OR T0.MthDate > ?) AND T0.RefDate <= ? AND T1.CardType = 'C'
ORDER BY T1.CardCode, T0.DueDate, T0.Ref1Hi,
The above error appears due to date format is differnt from SAP query generator and SQL server.
So you need convert all date in above query to SQL server required format.
Try to convert..let me know if not possible.
Thanks & Regards,
Nagarajan -
I have a table-valued function that run in sql 2005 and when try to execute in sql 2008 r2, return the next "Conversion failed when converting date and/or time from character string".
USE [Runtime]
GO
/****** Object: UserDefinedFunction [dbo].[f_Pinto_Graf_P_Opt] Script Date: 06/11/2013 08:47:47 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE FUNCTION [dbo].[f_Pinto_Graf_P_Opt] (@fechaInicio datetime, @fechaFin datetime)
-- Declaramos la tabla "@Produc_Opt" que será devuelta por la funcion
RETURNS @Produc_Opt table ( Hora datetime,NSACOS int, NSACOS_opt int)
AS
BEGIN
-- Crea el Cursor
DECLARE cursorHora CURSOR
READ_ONLY
FOR SELECT DateTime, Value FROM f_PP_Graficas ('Pinto_CON_SACOS',@fechaInicio, @fechaFin,'Pinto_PRODUCTO')
-- Declaracion de variables locales
DECLARE @produc_opt_hora int
DECLARE @produc_opt_parc int
DECLARE @nsacos int
DECLARE @time_parc datetime
-- Inicializamos VARIABLES
SET @produc_opt_hora = (SELECT * FROM f_Valor (@fechaFin,'Pinto_PRODUC_OPT'))
-- Abre y se crea el conjunto del cursor
OPEN cursorHora
-- Comenzamos los calculos
FETCH NEXT FROM cursorHora INTO @time_parc,@nsacos
/************ BUCLE WHILE QUE SE VA A MOVER A TRAVES DEL CURSOR ************/
WHILE (@@fetch_status <> -1)
BEGIN
IF (@@fetch_status = -2)
BEGIN
-- Terminamos la ejecucion
BREAK
END
-- REALIZAMOS CÁLCULOS
SET @produc_opt_parc = (SELECT dbo.f_P_Opt_Parc (@fechaInicio,@time_parc,@produc_opt_hora))
-- INSERTAMOS VALORES EN LA TABLA
INSERT @Produc_Opt VALUES (@time_parc,@nsacos, @produc_opt_parc)
-- Avanzamos el cursor
FETCH NEXT FROM cursorHora INTO @time_parc,@nsacos
END
/************ FIN DEL BUCLE QUE SE MUEVE A TRAVES DEL CURSOR ***************/
-- Cerramos el cursor
CLOSE cursorHora
-- Liberamos los cursores
DEALLOCATE cursorHora
RETURN
ENDYou can search the forums for that error message and find previous discussions - they all boil down to the same problem. Somewhere in your query that calls this function, the code invoked implicitly converts from string to date/datetime. In general,
this works in any version of sql server if the runtime settings are correct for the format of the string data. The fact that it works in one server and not in another server suggests that the query executes with different settings - and I'll assume for
the moment that the format of the data involved in this conversion is consistent within the database/resultset and consistent between the 2 servers.
I suggest you read Tibor's guide to the datetime datatype (via the link to his site below) first - then go find the actual code that performs this conversion. It may not be in the function you posted, since that function also executes other functions.
You also did not post the query that calls this function, so this function may not, in fact, be the source of the problem at all.
Tibor's site -
After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.
You should install Camera Raw 4.6.
Visit this page and follow the instructions carefully:
PC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
-Noel -
SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO AS T0 LEFT OUTER JOIN
VPM2 AS T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
OVPM AS T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
VPM1 AS T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate>='[%0]' and T0.DocDate<='[%1]'Hi,
Try this:
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO T0 LEFT OUTER JOIN
VPM2 T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry
LEFT OUTER JOIN
OVPM T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
VPM1 T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate >= '[%0]' and T0.DocDate <='[%1]'
group by T0.DocStatus,T0.DocDate ,
T0.DocNum ,
T0.NumAtCard,
T0.TransId ,
T0.Comments ,
T0.CardCode,
T0.CardName ,
T0.WTSum ,
T3.DueDate ,
T3.CheckSum
Thanks & Regards,
Nagarajan -
Display in PDF Browser - Item failed to convert in Outlook
Display in PDF Browser - Item failed to convert in Outlook
ben soules - 09:26pm Aug 22, 2007 Pacific
Hi Experts,
This is a bit of a pain I have to distrubte
Adobe Acrobat Pro 8.1 to about 3000+ users and I am having a problem,
In Prefs in "Adobe Acrobat Pro 8.1"
When I tick then untick, "display in PDF Browser" from the Preferences, My Outlook will fail to convert to PDF. I get an "Item failed to convert" message and a log file. Also Word 2003 will not post a .PDF to an email.
If I restart "Outlook 2003" it will create a "pdf" when I click the icon the first time, the second time I click it will fail.
Please help.
===================================================
Requested: 1,
Converted to PDF: 0,
Skipped [Already in PDF]: 0,
Skipped [PDFMaker failed to convert]: 1
Details of Email to PDF conversion:
Failed to Convert:
From: WS XXXX XX XXXXXXX, Subject: FW: testing, Date: 8/08/2007, Status: Item failed to convertWe also deployed 8.12 to over 1000 users with the "Disable PDF in browser" option checked using the customization wizard. Now we're finding some users need it to view certain PDFs in a web-based application.
We would like to add the option, but removing the registry key doesn't actually install the option when you check it. It seems you might have to create a new mst then redeploy. We'd really like to not have to do that, if at all possible.
In the Reader archives, one guy suggested running this:
msiexec /i Adobe_Reader_8.1_MUI.msi ADDLOCAL=ReaderBrowserIntegration
I haven't tried that yet. Any feedback or other suggestions?
E Long
Austin, TX -
I tried to convert .pdf file to MS Word, but it failed.
I noticed in a previous discussion on that topic that this converter ccnnot work with
.pdf files cteated by certain producers
My was created by Acrobat Distiller 10.1.2. (Windows)
Is that a rogue producer too?
Thanks
Alexey KovalevAt this point, try Acrobat XI Pro to see if you can convert the document there. A 30-day trial of Acrobat XI Pro is available here:
www.adobe.com/go/tryacrobatpro/
If the file fails to convert with Acrobat, it may be corrupted. How did you get this PDF?
-David -
Fail to convert between UTF8 and UCS2
: java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv
(BC4J throws that exception)
I got that error message when try to show the table's content in uix page.
I use varchar2(40). the error occurs, when i set special characters like õ,ü,Ü.. and so on.
This affects only UTF encoded database.
We use: 9.0.2.5, Jdev9.0.3.3., UIX, iAS 9.4.2??(i dont'know)
As i know the problem is when there is 40 letters in the column and it contains "special character" it can't convert it, because the neccessary space requered to store values is much more.
If i use nvarchar, i don't think it fix this problem.
And as i know, all sql constant must use where coulmn=N'constans value' format.
Q:
How can i set the UTF database and BC4J to run correctly.
I mean... what type to use, what is the column size to set.
Thanks in advice,
ViktorI had the same problem using Oracle 9i. The problem lied within the Oracle JDBC driver itself! --;
If you're using JDBC driver from Oracle 9i, stop using it!
You should download JDBC driver of Oracle 10g from Oracle site and use that driver instead.
After I changed the driver, I now have no problem of getting Korean characters from the database.
Hope this would solve your problem too. -
Fail to convert between UTF8 and UCS2: failUTF8Conv
We need to store possibly all UTF8 chararacter in his database
especially $ & ( 4 8 < = > from WE8ISO8859P1 and from WE8ISO8859P15.
So we install an UTF8 instance and set NLS_LANG to UTF8.
We have to do select/update from a java client and sqlplus(like).
When we insert with java client it's unreadable from sqlplus and
when whe insert from sqlplus we've got 'Fail to convert between UTF8 and UCS2: failUTF8Conv '
here the code made in sqlplus
update CPW_TEST set lb_comportement='$ & ( 4 8 < = > ' WHERE ID_TEST=14805;
here the code made in java
update CPW_TEST set lb_comportement='$ & ( 4 8 < = > ' WHERE ID_TEST=14804;
and then the result in database
SELECT id_test,LB_COMPORTEMENT FROM CPW_TEST WHERE ID_TEST=14804 or ID_TEST=14805
ID_TEST LB_COMPORTEMENT
14804 B$ B& B( B4 B8 B< B= B> B
14805 $ & ( 4 8 < = >
2 rows selected
and the dump
SELECT id_test,dump(LB_COMPORTEMENT) FROM CPW_TEST WHERE ID_TEST=14804 or ID_TEST=14805
ID_TEST DUMP(LB_COMPORTEMENT)
14804 Typ=1 Len=26: 194,164,32,194,166,32,194,168,32,194,180,32,194,184,32,194,188,32,194,189,32,194,190,32,194,128
14805 Typ=1 Len=17: 164,32,166,32,168,32,180,32,184,32,188,32,189,32,190,32,128
2 rows selected
I'm not sure, but it seems that sqlplus uses true UTF8 (variable length codes) and java client uses UCS-2 (2 bytes)
How can I solve my problem?
Our configuration
javaclient (both thin and oci jdbc driver 8.1.7), sqlplus client and database Oracle 8.1.7.0.0 on the same computer (W2000 or NT4)
Thank you for yoru attention.Hi Luis, thanks for your suggestions. You're right that problem was in JServ and his JVM.
There was conflict between different versions of Java. While iFS was using JRE 1.3.1, JServ was configured to use JRE 1.1.8. As soon as I corrected link to the right Java, problem disappears.
Radek -
SRM catalog navigation fails after Microsoft patch KB2416400
After applying Microsoft patch KB2416400, displaying catalogs is failing in IE7 and IE8. Getting the "Navigation to the webpage was canceled"... If you uninstall the patch, it will fix the issue in IE7. I have already reviewed the settings found in OSSN 1511147, which has not solved the issue when the patch is applied. Has anyone else applied this IE security patch and experienced similar results? We are on SRM7.0, SP05 - EP and catalogs both using https. Thanks.
Hi Kris,
we found a solution. Please look in SAP Note 1456162.
The note was written for IE 8, but it looks that the MS patch KB2416400 provides the same security measure also for IE 7.
IE7 does not allow the dynamic rendering of html by the outbound handler after the patch.
Cheers,
Jan -
Java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv
Hi all,
I am writing a servlet that connects to Oracle 8.0.6 through jdbc for jdk1.2 on NT 4.0
English version and it works fine.
But when the servlet is deployed to a solaris with Oracle 8.0.5 (not a typo, the oracle on
NT is 8.0.6 and oracle on solaris is 8.0.5) and jdbc for jdk1.2 (of course, for Solaris),
the servlet failed with the Exception:
java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv
(I am using JRun 3.0 as the application and web server for both NT and Solaris)
(The database in both the NT and solaris platform are using UTF8 charset)
My servlet looks like this: (dbConn is a Connection object proved to be connected to Oracle
in previous segment of the same method):
String strSQL = "SELECT * FROM test";
try { Statement stmt = dbConn.createStatement();
ResultSet rs = stmt.execute(strSQL);
while (rs.next()) {
out.println("id = " + rs.getInt("id"));
System.out.println("id written");
out.println("name = " + rs.getString("name")); // <-- this is the line the
exception is thrown
System.out.println("name written");
} catch (java.sql.SQLException e) {
System.out.println("SQL Exception");
System.out.println(e);
The definition of the "test" table is:
create table test(
id number(10,0),
name varchar2(30));
There are about 10 rows exists in the table "test", in which all rows contains ONLY chinese
characters in the "name" field.
And when I view the System log, the string "id written" is shown EXACTLY ONCE and then there
is:
SQL Exception
java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv
That means the resultset is fetch back from the database correctly. The problem arise only
during the getString("name") method.
Again, this problem only happens when the servlet is run on the solaris platform.
At first I would expect there are some strange code shown on the web page rather than having
an exception. I know that I should use getBytes to convert between different encodings, but
that's another story.
One more piece of information: When all the rows contains ascii characters in their "name"
field, the servlet works perfectly even in solaris.
If anyone knows why and how to tackle the problem please let me know. You can feel free to
send email to me at [email protected]
Many thanks,
Ben
nullHi all,
For the problem I previously posted, I found that Oracle had had such bug filed before in Oracle 7.3.2 (something like that) and is classified to be NOT A BUG.
A further research leads me to the document of Oracle that the error message:
"java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv"
is a JDBC driver error message of error number ORA-17037.
I'm still wondering why this behaviour will happen only in Solaris platform. The servlet on an NT machine I am using (which has an Oracle 8.0.6 and jdbc for jdk 1.2 running) is working just fine. I also suspect that this may be some sort of mistakes from jdbc driver.
Nevertheless, I have found a way to work around the problem that I cannot get non-English string from Oracle in Solaris and I would like to share it with you all here.
Before I go on, I found that there are many people out there on the web that encounter the same problem. (Some of which said s/he has been working on this problem for a month). As a result, if you find this way of working around the problem does help you, please tell those who have the same problem but don't know how to tackle. Thanks very much.
Here's the way I work it out. It's kinda simple, but it does work:
Instead of using:
String abc = rs.getString("SomeColumnContainsNonEnglishCharacters");
I used this:
String abc = new String(rs.getBytes("SomeColumnContainsNonEnglishCharacters"));
This will give you a string WITH YOUR DEFAULT CHARSET (or ENCODING) from your system.
If you want to convert the string read to some other encoding type, say Big5, you can do it like this:
String abc = new String(rs.getBytes("SomeColumneContainsNonEnglishCharacters"), "BIG5");
Again, it's simple, but it works.
Finally, if anyone knows why the fail to convert problem happens, please kindly let me know by leaving a word in [email protected]
Again, thanks to those of you who had tried to help me out.
Creambun
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by creambun creambun ([email protected]):
Hi all,
I am writing a servlet that connects to Oracle 8.0.6 through jdbc for jdk1.2 on NT 4.0
English version and it works fine.
But when the servlet is deployed to a solaris with Oracle 8.0.5 (not a typo, the oracle on
NT is 8.0.6 and oracle on solaris is 8.0.5) and jdbc for jdk1.2 (of course, for Solaris),
the servlet failed with the Exception:
java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv
(I am using JRun 3.0 as the application and web server for both NT and Solaris)
(The database in both the NT and solaris platform are using UTF8 charset)
My servlet looks like this: (dbConn is a Connection object proved to be connected to Oracle
in previous segment of the same method):
String strSQL = "SELECT * FROM test";
try { Statement stmt = dbConn.createStatement();
ResultSet rs = stmt.execute(strSQL);
while (rs.next()) {
out.println("id = " + rs.getInt("id"));
System.out.println("id written");
out.println("name = " + rs.getString("name")); // <-- this is the line the
exception is thrown
System.out.println("name written");
} catch (java.sql.SQLException e) {
System.out.println("SQL Exception");
System.out.println(e);
The definition of the "test" table is:
create table test(
id number(10,0),
name varchar2(30));
There are about 10 rows exists in the table "test", in which all rows contains ONLY chinese
characters in the "name" field.
And when I view the System log, the string "id written" is shown EXACTLY ONCE and then there
is:
SQL Exception
java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv
That means the resultset is fetch back from the database correctly. The problem arise only
during the getString("name") method.
Again, this problem only happens when the servlet is run on the solaris platform.
At first I would expect there are some strange code shown on the web page rather than having
an exception. I know that I should use getBytes to convert between different encodings, but
that's another story.
One more piece of information: When all the rows contains ascii characters in their "name"
field, the servlet works perfectly even in solaris.
If anyone knows why and how to tackle the problem please let me know. You can feel free to
send email to me at [email protected]
Many thanks,
Ben<HR></BLOCKQUOTE>
null -
SSRS error "Conversion failed when converting the nvarchar value"
Hi folks!
After SCCM 2012 R2 upgrade, we have errors with self made reports:
An error has occurred during report processing. (rsProcessingAborted)
Cannot read the next data row for the dataset DataSet2. (rsErrorReadingNextDataRow)
Conversion failed when converting the nvarchar value '*****' to data type int.
I found several articles to see reporting services log file for possible WMI related errors, but none exists. SQL server is 2008R2, Runned mofcomp, and re-installed reporting services role, but problem remains.
I traced the dataset2 query:
SELECT
v_Collection_Alias.CollectionID ,v_Collection_Alias.Name
FROM fn_rbac_Collection(@UserSIDs) v_Collection_Alias
WHERE
v_Collection_Alias.CollectionType = 2
Any adwice is appreciated.
~Tuomas.Hi Tuomas,
What's the SQL Server version? To verify the the SQL Server version, please see
http://support.microsoft.com/kb/321185
SCCM 2012 R2 need SQL Server 2008 R2 SP1 with CU 6 or SQL Server 2008 R2 with SP2 (http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigSQLSrvReq).
If the SQL meets requirement, I would suggest you submit a thread to SQL forum to deal with the sql issue.
Thanks.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
I'm a student I have a final project want to deliver it after two days.
I'm making a drag and drop game, I watched a tutorial to do that.
But after ending coding I faced a weird error!
I've I checked that my code is the same as the code in the tutorial.
This is the Debug error report:
Attempting to launch and connect to Player using URL E:\FL\ActionScript\Drag and Drop Project\DragAndDrop.swf
[SWF] E:\FL\ActionScript\Drag and Drop Project\DragAndDrop.swf - 87403 bytes after decompression
TypeError: Error #1034: Type Coercion failed: cannot convert paper1$ to DragDrop.
at Targets()[E:\FL\ActionScript\Drag and Drop Project\Targets.as:23]
My `.fla` File is containing 12 Objects to drag and another 12 Objects to drop on it.
The idea here is when drop the Object on the target the Object will become invisible and the target become visible (in `.fla` file `target alpha = 0`).
I made two classes:
DragDrop.as : for the objects that I'm going to drag.
Targets.as : for the targets that I'm going to drop Objects on it.
Note: match function is to animate "GameOver" MovieClip When complete the game.
DragDrop.as:
package
import flash.display.*;
import flash.events.*;
public class DragDrop extends Sprite
var origX:Number;
var origY:Number;
var target:DisplayObject;
public function DragDrop()
// constructor code
origX = x;
origY = y;
addEventListener(MouseEvent.MOUSE_DOWN, drag);
buttonMode = true;
function drag(evt:MouseEvent):void
stage.addEventListener(MouseEvent.MOUSE_UP, drop);
startDrag();
parent.addChild(this);
function drop(evt:MouseEvent):void
stage.removeEventListener(MouseEvent.MOUSE_UP, drop);
stopDrag();
if(hitTestObject(target))
visible = false;
target.alpha = 1;
Object(parent).match();
x = origX;
y = origY;
Targets.as:
package
import flash.display.*;
import flash.events.*;
public class Targets extends MovieClip
var dragdrops:Array;
var numOfMatches:uint = 0;
var speed:Number = 25;
public function Targets()
// constructor code
dragdrops = [paper1,paper2,paper3,paper4,paper5,paper6,
paper7,paper8,paper9,paper10,paper11,paper12,];
var currentObject:DragDrop;
for(var i:uint = 0; i < dragdrops.length; i++)
currentObject = dragdrops[i];
currentObject.target = getChildByName(currentObject.name + "_target");
public function match():void
numOfMatches++;
if(numOfMatches == dragdrops.length)
win.addEventListener(Event.ENTER_FRAME, winGame);
function winGame(event:Event):void
win.y -= speed;
if(win.y <= 0)
win.y = 0;
win.removeEventListener(Event.ENTER_FRAME, winGame);
win.addEventListener(MouseEvent.CLICK, clickWin);
function clickWin(event:MouseEvent):void
win.removeEventListener(MouseEvent.CLICK, clickWin);
win.addEventListener(Event.ENTER_FRAME, animateDown);
var currentObject:DragDrop;
for(var i:uint = 0; i < dragdrops.length; i++)
currentObject = dragdrops[i];
getChildByName(currentObject.name + "_target").alpha = 0;
currentObject.visible = true;
numOfMatches = 0;
addChild(win);
function animateDown(event:Event):void
win.y += speed;
if(win.y >= stage.stageHeight)
win.y = stage.stageHeight;
win.removeEventListener(Event.ENTER_FRAME, animateDown);
...ThanksThank you very much for replying.
- dragdrops represents: the dragable objects.
- Targets obtaining the dropable objects by hitTestObject, then the dropable objects visible is turned to false, & the target visible turned to true.
Dragable objects is a 12 elements all of them have an instance names: paper1....paper12.
When I focused to the project I noticed that I forget to give the dragable objects an instance names!
after making the instance names to them, a new error occures:
E:\FL\ActionScript\Drag and Drop Project\Targets.as, Line 11
1046: Type was not found or was not a compile-time constant: paper1.
This error is continuing to paper2, paper3.....paper12 !
Please download my project, I must deliver it to my college in 24/12. I will never forget your favor. thanks.
https://www.dropbox.com/s/8mdg5w17vvryzso/Drag%20and%20Drop%20Project.rar | 715KB
Maybe you are looking for
-
PLEASE HELP! - Printing Yellow on Brown Kraft Paper
Please, please help!! I am sooooo frustrated right now! For starters, I'm a bit beyond intermediate Photoshop user (10yrs of habitual use). I NEED to print yellow on brown kraft paper. There's no alternative. I have to or I'm going to have one VERY u
-
Migration tool to support migration from WAS 5.x and WLS 8.x to AS 7.x
This is to announce the release of a new migration tool adding support for IBM WebSphere 5 and BEA WebLogic 8 to Sun Java System Application Server 7.x . Along with the tool, we refreshed the website with more partners and client solutions migration
-
ITunes 10.5 freeze when i plug iPhone or iPad2
Hi! I'll been have this problem for the past few days and i can't upgrade any of my others iPhones. iTunes work fine for music, videos etc. but when i plug my iPhone's or my iPad2 stop working doesn't say anythink. Please help me to fix that. Thank y
-
Initial Context Security Issue
Hi, I wonder if someone can help me with this one?? The problem we are experiencing is that we have a remote client that connects to 2 completely independent Weblogic 6.1 instances, and it appears that, under certain circumstances, that the initial c
-
How to type @ sign on Japanese apple wireless keyboard?
Hi: I have recently bought apple wireless japanese version, everything is ok only that I am unable to find how to type @ sign. Anyone using the same keyboard, can you please help? Regards, Nauman