Catalog SC turning to a PR instead of PO in ECC

Hi All,
I am encountering a scenario where my catalog SCs are turning to RQ rather than PO in ECC.
ours is a SRM 5.5, ECC 6.0 classic scenario. Our backend document creation determination is set to PO if requisition is complete else PR. We do not have any requirements to create backend PRs.
Rest of the punchouts, FFT are working fine. this was a custom catalog with characteristics added. we activated Catalog_transfer_badi to transfer custom field to SC. Transfer of field works good. Its only after the approval of SC its expected to create PO. All data, Acct assignments structures are all the same as other SCs that are working.
In BBP_PD it shows last status as approved instead of showing item in transfer. Its not triggering the PO create badi.
Please advise.
Thanks
Viktor P

Hi,
Please check the Product Category. If the product Category in the shopping cart is missing, then the Vendor Web Shop page does not transfer the product category to your system. This could be due to different version of UNSPSC codes vendor is using or vendor has not allotted the desired UNSPSC code to the respective article on their web shop page. Please co-ordinate with Vendor in this case.
If the above is through, then check the field Source of supply, Unit of measurement, Cost Assignment, Price & Price Unit. Absence of data or wrong data in this field may cause PR conversion instead of PO based on your BADI settings if any.
Let me know the result.
Regards,
Sachin

Similar Messages

To Turn OFF ATP check in APO-GATP Instead do locally in ECC.

Dear SAP Friends,
Currently for Sales orders & Deliveries, we have ATP Check (Allocation Check + Product Check) happening in APO-GATP. We would like to turn-off ATP check in APO-GATP, instead want to do only Inventory Check in ECC locally.
We want to do above for few particular model/plant combinations and not for all model/plant combinations. Meaning APO-GATP will still be used for many other APO relevant Model/Plant combinations.
What are the changes required to CIF Integration models u2013 Salesorder+ATP Check, or any other IM. Any changes specific to material master in ECC - like MRP Controller, ATP Group, Strategy Group or any config changes on APO side.
Please guide me with stepwise instructions.
Appreciate your help.
Thank
Satish
Edited by: SatishW on Jun 18, 2010 9:33 PM

Hi Satish ,
I am not an expert on GATP but logically what I can suggest following steps :
1.As you want ATP check to happen in APO for few codes, you will have to Select/Tick 'Material Independant Object' - ATP Customization in CIF IM , so that ATP customizing settings are transferred to APO from ECC.
2. But at the same time you need this ATP check to happen in ECC locally and not in APO for certain products, then in other CIF IM you have to select 'Material dependant objects '- ATP Check where you can set the filter/exclusion on those codes so that the ATP check does not take place in APO.
3. Also like as R/3's backorder processing, in order itself you can set as the ATP check to occur in R/3 and not in APO.
Hope this helps...
Regards,
Digambar

When I turn on my iMac, instead of the normal opening screen I get an image of a gray file with a question mark in it flashing. What is is? mark

When I start my iMac, instead of the regular start up screen I get an image of a gray file folder with a question mark in it. The image is flashing. What is this? mark

Unishape, you'll need to get out you're install discs that came with your Mac. See this article for help
https://support.apple.com/kb/TS1440

POCKET TUNES NOW TURNS MY PHONE OFF INSTEAD OF WORKING

MY POCKET TUNES WORKED JUST FINE YESTERDAY AND NOW ALL OF A SUDDEN WHEN I GO TO USE IT IT TURNS MY PHONE OFF... WHAT DO I DO? HELP PLEASE ASAP!!!!!
Post relates to: Treo 700p (Verizon)

Hello Normsoft support here,
Any crash in Pocket Tunes can usually be explained by one of five things. Most common is a corrupt audio file. Second is a corrupt file system on the expansion card. Third is having incompatible software installed. Fourth is a corrupt installation of Pocket Tunes. The final one occurs with streaming audio, and is due to a low amount of available internal memory on the device itself. Palm memory being flash, the nature of the beast can cause file corruptions. The steps to resolve the problem would best be performed as:
1. Make sure you have the current version of Pocket Tunes installed. You can get the latest version here
Desktop: http://www.pocket-tunes.com/download.html or
Mobile: http://www.pocket-tunes.com/mobile/index.html
2. Make sure you have no incompatible programs installed, or have applied the solution for those that provide one. A list will be provided below.
3. Try reinstalling Pocket Tunes to rule out the possibility of a corrupt program file.
4. Format your card with the Card Info application to rule out the possibility of a bad file system on the card. Run Pocket Tunes with no audio files installed. If it doesn't crash, then that rules out an incompatible program.
5. Install your audio files, preferably one at a time until you find which one or ones are causing a problem.
Incompatible programs:
Hi-Launcher 3 - May cause your device to freeze when Pocket Tunes is running and you use Hi_launcher to turn off the device
OnlyMe - May cause a crash when screen turns off. Uninstall OnlyMe
ImageClock 1.5 - Can cause your device to reset when Pocket Tunes goes from one song to the next. May also cause excessive skipping when it is in the foreground and Pocket Tunes is playing in the background. Uninstall ImageClock
BrightIQ - Causes crash when used with Pocket Tunes.
VolumeCare 3.17 or earlier - With VolumeCare activated, the ability to use the Treo volume buttons to control PocketTunes volume is compromised. Update to the latest version
headsetcontrol - If you plug in a cassette adaptor it can cause Pocket Tunes to skip to the next song.
FontSmoother 1.68 or earlier - May cause the background to disappear on the LifeDrive. Update to latest version
VeriChat - Can sometimes use up resources when running in the background.
Unfortunately I am unable to monitor this thread, however if you require further assistance please feel free to submit a support ticket using the link below:
http://www.pocket-tunes.com/scripts/support.php
Post relates to: Treo 750 (AT&T)

I updated to ios8, and now I can't talk and have it turn into text. Instead it records my voice. How can I make it go back.

I Am not interested in recording my voice. the simple way I could just press the microphone key and talk was great. How can I go back to the old and convenie system?

There is no microphone to the bottom left, Just bottom right. And when I touch it it says "tap and hold to record and send audio." That is exactly how I do. To want my text messaging to operate.
edit. Auto corrected effed up that last sentence. That is exactly how I do not want my messaging to operate.

I updated my iPhone with the new update..and afterwards it turned off and instead of turning back on it tells me to plug it into iTunes..then iTunes tells me my phone is in recovery mode and I need to restore it..is there anything I can do w/o restoring?

I updated my iPhone with the new update..and then it turned off...instead of turning back on it tells me to plug it into iTunes..and when I do iTunes tells me that my phone is in recovery mode and needs to be restored..is there anything I can do without restoring it?

Same thing happened here ~ tech guy at a local authorized Apple repair store said it had something to do with improper backup from which the restore would be made. Still have a phone that asks to be connected to Itunes but won't do anything else . . . frustrated.

Drop down menu turning to all caps after clicked in browser

Problem. drop down menu turning to all caps after clicked in browser, instead of staying upper and lower case.
Originally, I made the drop downs in fireworks CS3. Then when I work with them in dreameaver CS3.
It looks perfect UNTIL ... after clicking on dropdown once, then go back to that page and that particular dropdown menu turns to ALL CAPS instead of what it should look like.
How can I make it NOT do that?
I did NOT do any special code that I know of to cahnge anything, I hav not experienced this problem before.
Here is a link to my website I am designing.
http://greenairenvironmental.com/3/Asset_Property.html
I need help to fix this problem. Thank You in advance.
http://greenairenvironmental.com/3/Asset_Property.html
I have attached the automatically generated .css file from fireworks that might be the source of the problem.

Take a look for this selector in your greenair.css file:
a:visited {
    font-family: Arial, Helvetica, sans-serif;
    font-size: 16px;
    font-weight: bold;
    text-transform: uppercase;
    color: #9FCE62;
and remove the text-transform.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

How can I get Photoshop Elements to import photos that it wrongly indicates are wrong or in catalog?

Had 17,000 photos on harddrive before installing Photoshop Elements 11 today. Had them well organized in a number of folders under My Pictures. PS found and imported only 467 photos. I tried Search, Browse, and import Files; was able to highlight folders and individual photo files. When I clicked Get Media, it processed for 20 seconds and came back with message that "Files are not in correct format or are already in the catalog." In fact, they are in the correct format (jpg - able to easily view with other programs) and they are NOT visible in the catalog. I went into Control Panel and enabled the Watch service, listed all of the files that PS had not imported from, and still cannot show more than 467 of my photos. Very frustrating, any suggestions? Running Win 7 on 6-months old Sony that plays Blue-Ray, with 8 GB RAM and quad core Intel processors.

This forum is amazing - thanks to all who responded over the weekend. For future users, some replies I found helpful: 1. allow a lot of time for the cataloging process. I had not realized it would be such a slow and incremental process but a day later it is continuing to add to the catalog - am now up to a couple thousand in the catalog, 2. turning off Organize and Stack visually-similar, and the corrective functions during the initial process speeds things up, 3. go into Control Panel, Administrative, Services and activate the Photoshop Elements watch function as soon as you install Elements, 4. it was helpful to repair/optimize, and 5. if you realize it is really messed up, uninstalling Elements and re-installing may work better than lots of little tweaks and fixes. Now if I can just figure out how to get photos ordered by actual date taken rather than random future dates that my camera or previous version of Elements 8 apparently assigned....

Help with HP DeskJet 5650: turning on automatically

W have an HP Deskjet 5650 that is connected to my Airport Express (Firmware 6.3; running Bonjour for Windows 4.2). We use the Airport Express to print from my desktop (Windows XP SP2) and a MacBook Pro (OS X 10.4).
When printing from the desktop, the printer will automatically turn on when detecting a print job (just like it used to do when connected to the desktop directly through using USB).
When printing from the MacBook Pro the printer will not turn on automatically. Instead, we have to walk in to the study to turn on the printer.
Any help in getting the printer to turn on automatically when detecting a print job from the MacBook Pro would be appreciated.

First, disabling the SSID broadcast is not a security measure. Freeware from the Internet can still read it. Plus, as you have determined, your printer will not like it at all.
Read this for more info: http://blogs.zdnet.com/Ou/?p=43
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

T42p vista fn + f3 and fn + f4 functions (turn off screen and sleep) not working correctly

Hi -- I recently installed windows vista on my T42p. It works fine except that the fn+f3 and fn+f4 functions do not work as expected. Before installing the hotkeys driver, the fn+f4 function worked correctly while f3 did not (going to sleep worked, turning the monitor off did not). I then installed the recommended hotkeys driver. Now fn+f4 makes the monitor turn off while f3 does nothing ... fn+f4 is supposed to put the laptop to sleep. On top of this, if i select "sleep" from the start menu, the computer turns the monitor off instead of going to sleep.
Presumably, the sleep button could still be telling the computer to go to sleep, but the actual operation of going to sleep is now broken? Just a guess. Anyways -- anyone know how to resolve this so that fn+f3 turns my monitor off and fn+f4 puts my computer to sleep?

I've too this problem, but more, my sound mute wasn't worked (for deblock, but it can block it few second before...) 5 days in 5-6 instalation of three version of winxp: winxp ru x64 sp2, winxp es/ru sp3 x32.
eventually I've found and ran "TPOSDSVC.exe" in instalation directory and it give an opportunity deblocking the sound volume!!!!!!!!!!!! and I don't need more functions
volume levels and brightness adjustment worked well without OSD (before I ran TPOSDSVC.exe) and with OSD.
and now I don't know worked this bustered sound driver in winxp x64.
ThinkPad T61 7664

Strange thing happend today when turning on my computer

Hello,
This morning when I turned on my computer, instead of the grey screen with the apple appearing, it stayed black, however, the light was on in the right hand corner (and it stayed on) and the fan was running loudly. It looked like it was sleeping except for the fact that the light was not pulsing like it usually does - it was a solid light and the computer itself was still running because I could hear it. I tried to hit a button on the keyboard to see if I could somehow get it to finish starting up - that didn't work - so the only other thing I thought to do was reset it by holding in the start up button - that didn't work. I had to hit the power strip off and then back on (probably not the best thing for the computer). Shutting the power off and then back on allowed me to start up fine and everything has appeared normal throughout the day - I have turned it off and on multiple times (just testing it out - I don't usually do this a lot throughout the day) and the computers sleep functions have been fine.
Has this ever happend to anyone else? Is there something I should look for/watch out for? Any suggestions would be appreciated. Thanks!

Hello,
Thanks for your help. Here's what I did:
I went into Disk Utility and selected the hard drive icon (there were two listed which confussed me - one just said "macintosh HD" and the other one had numbers listed next to it - which one is my "volume"? I wasn't sure so I just selected the "Macintosh HD" one which was the one listed below. I hit "repair permissions" and it took approx 8 minutes - I have NEVER none this in the 2 years that i've had my iMac.
Once you tell me if i've selected the right volume i'll verify my hard drive.
Thanks for your help - I'm nervous doing anything like this due to a REALLY bad PC experience I had a few years back and I lost EVERYTHING! So, I don't go exploring around a lot on the system - although I wish I knew more.

Previous saved tabs turned into blank pages. Firefox.

Hi, I've been using Firefox for a long time and have set it to 'Restore Previous Session' setting. But earlier today as I open Firefox, all of my previous tabs have turn into new tabs instead (blank pages). The amount of tabs I had still remain the same just that they've all been turn into new tabs. I still have the list of websites I've visited in my History but my previous tabs are all saved throughout the year and I've cleared my history before. I would really appreciate anyone's help in getting back my old tabs. Thank you and regards.

In case you are using "Clear history when Firefox closes":
*do not clear the Browsing History
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

Web Catalog Publishing using MDM RPCM scenario

Hi Experts
Is it possible to do web catalog publishing using MDM Publisher or Publisher APIs? if yes, where can i get the information on how to proceed with it?
I came across this[thread|Re: Web Catalog Publishing]
where Markus has stated that web catalog publishing is possible with java APIs and SAP is having plans to include that functionality in Publisher tool as well, in its future releases.
I couldnu2019t find any straightforward answer for my question either in MDM Java docs or in Publisher guide.
Thanks in advance
SwarnaDeepika

Thank you Markus for the prompt reply.
The link was very helpful. The line
To build dynamic Web sites with complex MDM data layouts
was what i was looking for.
So using the publishing APIs MDM data can be sent through to a web site which acts as a online catalog, can you please confirm?
Can these APIs be used to expose the catalog using enterprise portal as well, instead of a normal website (just like how its done in SRM-MDM catalog)?
P.S: Kindly bear with me, if my questions are silly. An expert's opinion is all i need
Regards
SwarnaDeepika

Hide the punch out catalog for some purchasing groups

Hi ,
I want to hide one punch out catalog for purchasing groups . How is this possible ?
Can we do in PPOMA_BBP , but the excluded tab is in display mode .
Please help ...
Thanks in advance
Neha

Hi,
You can do this in PPOMA_BBP transaction. Excluded tab is in display mode because you may have added the catalog at Purchasing grp levels.
Insteading of adding the catalogs at purchasing grp levels add the catalogs at the Purchasing Org level.
Then all the catalogs will be inherited in below purchasing grps, there you can check exclude tab for one which you dont want in that purchasing grp.
Hope this solves your problem.
Thanks
Venkatesh P

Numbers for ipad: turn text on vertical axis

Can I turn print on the vertical axis?I want to type something in spreadsheet and turn it 90 degrees instead of squashing print together so the letters are above each other the right way up. eg: if I type " Apple ", can I rotate the complete word 90 degrees so I can read the word if I rotated the ipad if the rotate lock is on?I want to use this for bar graphs where there is no room to type normal way up

For future reference, there is an area for iOS apple apps, including iWork and Numbers. You will usually get more answers in the proper location for the topic.
oh, btw, yeah James is right, no way right now to rotate text. unless its in a stand alone text box.
Jason

Catalog SC turning to a PR instead of PO in ECC

Similar Messages

Maybe you are looking for