Catalog selection in Qualitative MIC's

Hi Experts,
I am new to QM. While doing the results recording for Qualitative MIC in QE51n i could see a pop up showing catalog selection. I dont want this pop up to appear in my results recording. Is this pop up related to Qualitative MIC and it appears always for Qualitative MICs? Is there any possible way to restrict this?
Looking forward to your reply.
Regards
Ramanan R.S.

Dear Ramanan,
I think it is possible. Just try following if works for you.
1.     You must have definitely ticked on Reference to Characteristic Attribute Required in the qualitative MIC that you are using.
2.     Just deactivate it and remove the selected set assigned to it in transaction code QS23
3.     You have to make these changes in inspection plan also  by selecting control indicators.
4.     Then in RR screen you have to key in only non-confirming units instead of selecting from pop up every time.
But, as rightly quoted by Craig and Sanil, I also recommend to inspect qualitative characteristic by means of selected set. But it depends on your business call.
Have happy week end!
Best Regards,
Anand Rao

Similar Messages

  • Search option in catalog selection in maintenance notification item, object

    Dear Experts,
    I have a problem to search & choose the relevent catalog codes in maintenance notification item,  in catalog selection pop up when F4 done on object part. Is there any setting to find the relevent codes from the cataloge selection screen or any setting for the FIND option availabilty on the catalog selection pop up.
    We are using ECC 5.0.
    Kindly provide the solution.
    Regards,
    Tushar

    Tushar,
    Your emphasis is on Relevant Codes. This means codes relevant to the Technical Object (Equipment or Functional Location)
    For this purpose only SAP has given the functionality Catalog Profile.
    Create a Catalog Profile  (OQN6) in which you mention the codes relevant to the technical object.
    Now mention this Catalog Profile in the Organisation tab of the Technical object. (Equipment or Functional Location).
    After this whenever you create a notification on such Equipments/FLs, you will get only those catalogs which you've mentioned in the Catalog Profile
    Hope this helps you.
    Regards
    Jogeswara Rao
    PS: Creating a catalog Profile is a IMG activity, which you have to do in Client 200> generate a request> and transport this request to the client of your working.

  • Error :The catalog selected is currently unavailable:Please try again later

    Hi Experts,
    I am getting an error "The catalog selected is currently unavailable:Please try again later" when select a sold to party. I am not getting this every time. Only sometimes i am getting this error. When i delete the temperorary files from internet explorer sometimes this error is not coming. What might be the reason for this error??
    Thanks a lot in Advance.
    Regards,
    Lakshman.

    Hi
    Please let us know whether the error is thrown for all the sold to parties or for some.
    This error is caused because the catalog cache is flushed out . A quick solution would be to replicate the product catalog from the CRM system to TREX system.

  • Find option for  Catalog Selection

    Hi All
    In transaction code QS42, there is no FIND option for Catalog Selection list. Please advice whether it is possible to provide find option for catalog selection.
    thanks
    Ravindra Suvarna

    Hello Ravindra,
    In the transaction QS42, there is F4 help for Catalog.
    You can give serach parameters there and get the required catalog.
    Other than this if you want to change the selction parameters of the transaction QS42, then following are the steps -
    1. Tcode - QS42
    2. Menu Catalogs -> Selected Sets -> Display
    3. Selection screen will change accordingly. You can revert back to original screen similar way by the menu Selected Sets.
    If the above doesn't solve your query, plz elobarate your query.
    PS: If the answer solves your query, plz reward points.
    Regards

  • QM: Which table we get Inspection catalog codes by using MIC

    Hi,
    I am having Master Inspection Characterstic(MIC) and plant by using this I need to get Inspection catalog codes qualitative(ex:YES/NO).
    Please provide a link table or provide function modules for Inspection catalog codes
    Thanks,
    Mahahe

    Hi,
    Can you please explain me what you want to make ,maybe i will help you out...well to have Inspection catalog codes using MIC you can have table QPAC(Inspection catalog codes for selected sets).
    i hope this will solve your problem.

  • Catalog selected is unavailable (E-Commerce B2C 7.0)

    Hi All,
    I'm working on E-Commerce, B2C scenario. I have not maintained R/3 related settings. All the configuration are done w.r.t CRM. When I launch the website I get the error 'The catalog that you have selected is currently unavailable; try again later'. I have checked the product catalog in COMM_PCAT_ADM & the product catalog is available. Kindly let me know how to resolve this error.
    Regards,
    Archana.

    Hi Archana,
    Please check forum subject. Here is SAP Business One E-Commerce and Web CRM forum. It is dedicate to SAP Business One - an application for SME. It is nothing related to your E-Commerce B2C 7.0. Close the thread and posted on a proper forum.
    Thanks,
    Gordon

  • Catalog selection multiple option as list

    Dear All,
    Multiple catalog option required for creating PO, currently we are using catalog but it is showing only one not multiple.
    one page is open only we required option.
    Please guide me.
    Thanks
    Shital
    Edited by: Shital Deshpande on Oct 9, 2009 1:00 PM
    Edited by: Shital Deshpande on Oct 12, 2009 11:13 AM

    Yes this is possible with standard functionality.
    You will have to create 3 separate catalogue with a variant and a view in each catalogue.
    Then you should assign the sold to party to each catalogue view.
    When the user logs on to the webshop they will be asked to select a specific catalogue.
    Please award points.

  • Selected Sets for Catalog code - 9

    Dear all,
    I am aware that Selected sets can be created only for Catalog type 1 & 3. But in our business we have classified different type of defect codes in type 9. Evenhough I am attaching specific catalog defect type in MIC, when I see it in the notification screen, whole list of defect type is showing. Is there any possibility to group the defect codes according to the plant? (For your info - We have 4 different plant and each one of them has to use different catalog type as product manufactured is different)
    Regards,
    R.Ponniah ;

    hi,
    Use catalog profile  for specific defect type, plant wise it is not possible in std SAP, better to define catalog profile and assign all defect type code grp. in that profile and assign that profile with ur notification type. goto config (SPRO)-> Quality Notification>Defect Recording-> define notification type----> and maintain all in that pop- up one by one.
    Defect type is not plant specific.
    Regards
    Edited by: D GURU on Jan 17, 2012 8:26 AM

  • Displaying long text maintained for selected set codes in result recording

    Hi Gurus,
    I have maintained qualitative mic.For this mic i have defined selected set codes & for these selected set codes i have maintained long text.
    My client requirement is that this long text should be visible while doing result recording for the mic.Is this possible.
    Regards
    Amit

    How can they expect that?  Long text can be... well.. long.......  How can you include that on the same screen as results recording.  What if you have 5 charac with long text?  What if each selected set choice has long text and you had two choices for each?  That's ten sections of long text on one screen?   Impossible.
    Printing the long text on the cert shouldn't be a problem.  You just have to get someone to code it into the layout set.
    Craig

  • Where Used for Code groups or Selected Sets

    Dear all,
    can any body plz tell me how can i know which code group or selected set is used in what qualitative MICs.
    either any report or transaction...
    thanks in advance
    zeeshan

    Hi Zeeshan,
    According to my information,,,
    For Code Group
    In QS41/42/43/44, reach up to the second screen "Change View: Codes" Overview. And then click on the "Used in Selected Set" Or short key "CntrlShiftF3"
    For Selected Set.
    I think no such std sap report is available. But what you can do is use the work bench CWBQM in display mode,,,,,
    - CWBQM---> select the "Current Working Area" as "Q_OPR_000000000010".
    - Apply the Basic Selection or Additional Selection Criteria" and then press Cntrl+F7.
    - the list of the MIC data will be available here.
    Or
    You have to write done a query SQVI
    Or
    Develop a customized report.
    Regards,
    Shyamal

  • Tables for Defect type and its description while defect recording for a MIC

    Dear Experts,
    Kindly suggest the tables name  in  system by which we can get Defect type and its description that we have used while  performing defect recording for a MIC in system at the time of result reording for an inspection lot.
    Thanks in advance for your inputs ...
    Best regards ,
    Nitishj

    hii,
    Check
    QPAC - Inspection catalog codes for selected sets
    QPAM - Inspection catalog selected sets
    QPMK-CODEQUAL- Defect code grp for rejection at MIC level
    Link above table field name with QAVE for UD code & QAMR for Results recording
    Edited by: Lokesh K on Sep 29, 2010 10:43 AM
    Edited by: Lokesh K on Sep 29, 2010 10:45 AM

  • Tables for Quantitative and Qualitative charecteristic

    Hi,
    I have a query as follows:
    In case of u201CQuality Inspection Planu201D we didnu2019t maintain the u2018Master Inspection Characteristicsu2019 BUT we use to maintain it by selecting the qualitative and Quantitative check box in u2018Inspection Characteristicu2019 screen.
    we want to fetch the report of existing Characteristic to know whether the defined characteristic is qualitative Or quantative.
    The Input will be: Material and Plant.
    Out put will be: Material, Plant, Characteristic Number, Qualitative OR Quantative
    Is there any table or any way such that I can get the information whether the characteristic is Qualitative OR Quantative?
    Regards

    Hi
    While creating the MIcs you have two options whether you go with the check box selction for qualitative or quantitative or go with control data preset indicators selction which will be sam as of that particular check Box.
    For that preset indicators or control key in MICs Check Table TQ27
    Check and revert
    Regards
    Anupam Sharma

  • Decimal place for qualitative characterstics

    i have  lot with 01 inspection type ,quantity 1.5 Litres,its a qualitative MIC with classed recording ,while result recording for this
    quantity to be Accepted are rejected and partialy accepted,while entering the values i.e 1.5 its giving a error that is no decimal places are allowed,i checked all the Base units its all in Litres,how i overcome this type issue,

    Yes system behaves as per setting you have done
    1.You have selected Qualitative Char ,it means you should enter "accepted or  rejected" etc.
    but you have entered 1.5 this is a "Quantitative Value"
    2.So You have make this char as "Quantitative" ,select the upper limit ,lower limit ,base value along with decimal places(say 2).
    this will  allow you to enter value 1.5 or 1.50 etc

  • UD will be saved under 'Accept with deviation' if having any rejec. of MIC

    Hi,
    I want make a configuration of,
    Suppose one material (for example Mat u2013 A1), it has been purchased from outside. After procurement this has to check from quality angle. Problem is occurring while checking quality parameter of different MIC in QA11 (UD), suppose out of 5 MIC, 2 parameter is out of spaces and that has been rejected. In this situation , I want to configure if any parameter of a inspection lot is out of spaces  , u2018UDu2019 will be  saved under u2018 accept with deviation u2018 if any one by mistake want to save UD under u2018 Acceptu2019 or UD under u2018Rejectu2019 , UD document will not be saved.
    Under QS51, using catalog type 3, i.e. usage decision, catalog selection Z01, containing A - Accept, A0 - accept with deviation and R- rejected.
    Please let me know standard SAP configuration.
    Regards,
    Amit

    Hi,
    Problem has been solved.
    Thanks ,
    Amit

  • Entering values in Web Services ID and Description, for External Catalog

    Hi,
    I am trying to connect to an external Vendor Catalog from ERP. Pl note that we just have ERP ECC 6.0 and no SRM. I went to SPRO and followed menu path 'Materials Management >> Purchasing >> Web Services: ID and Description'. I am not sure what to enter in 1) Seq. Number  2) Name of Parameter for Web Service and 3) Call Structure COLUMNS.
    I have URL from Vendor, User Name and Password. I need to know what values are mandatory here so I can successfully connect to external Catalog. If someone can give me sample values, I can try.
    Any help is appreciated,
    Niranjan

    Update on 08/23/2011.
    We are able to connect to Vendor Catalog, select items in Cart. When I press 'Place Order' button, I see all items populated in SAP PO ME21N screen. We can then add other information and create PO. This is working great. We have another question. Heard that with ERP ECC 6.0, we can only connect 1 vendor catalog. But with SRM, we can connect more than  1 vendor catalog. Is there a BAPI or change SAP code to connect more than 1 vendor catalog from ECC 6.0 ?

Maybe you are looking for