Catalog Validation in OBIEE CLuster

Hi Friends,
I am planning to do catalog validation. My environment is OBIEE Cluster... I am reading throug the documentation and it is little bit confusing...
What documentation says :
shut down both PS1 and ps2 ( Presentation services)
and put you r validation elements  in instance config (ps1)
and start your presentation services ......
Do I need to do it on both presentation services (or)
Is it fine If I do it on one node... Please clarify....
Thanks
OBIL

if your catalog is shared location then either one should work, if not then u need to do on both

Similar Messages

  • Error when create listener - thespecified IP Address 'IP' is not valid in the cluster-allowed IP range.

    Hi...
    I'm able to configure AlwaysOn and all things are great.
    I have a problem only when create a listener , I have two node in same data center (SQLP1,SQLP2) and one in DR data center (SQLD1) 
    SQLP1 + SQLP2 > Sync
    SQLD1 > Async
    The error I face is 
    The specified IP Address 'IP' is not valid in the cluster-allowed IP range. 
    Check with the network administrator to select values that are appropriate for the cluster-allowed IP range.
     (.Net SqlClient Data Provider)
    I went through some suggestion and found a permission required (create computer objects) and I give it but still error show up.
    I follow the same as here 
    http://blogs.msdn.com/b/psssql/archive/2013/09/30/error-during-installation-of-an-sql-server-failover-cluster-instance.aspx

    Hi 
    Thanks for your follow up. I hope the below information is enough
    Creating Listener through visual studio wizard “Add listener”
    Hostname
    IP Address
    Description
    SQLP1
    Public
    10.190.255.90/
    Subnet 10.190.255.0/24
    Private
    10.192.255.90
    subnet 10.192.255.0/24
    MS SQL AlwaysOn Availability Test Lab Server 1 – Main DC
    SQLP2
    Public
    10.190.255.91
    Subnet 10.190.255.0/24
    Private
    10.192.255.91
    subnet 10.192.255.0/24
    MS SQL AlwaysOn Availability Test Lab Server 2 – Main DC
    SQLDR1
    10.193.255.90/
    subnet 10.193.255.0/24
    Private
    10.194.255.90
    subnet 10.194.255.0/24
    MS SQL AlwaysOn Availability Test Lab Server 1 – DR DC
    10.190.255.93
    SQL Always on listener

  • What is Catalog Crawler in OBIEE?

    I would like to know what is catalog crawler in obiee 11g. The reason I am looking for the details is there are couple of core dumps created by catalog crawler in obiee.
    Thanks,
    Anil

    Hello,
    In a last few days catalogcrawler created several core dumps in my 11.1.1.5 OBIEE installation , on AIX. Any input would be appreciated, Can not find much on that subject on oracle support site or on the web. Also, do not see any errors reported in EM.
    Regards,
    VK

  • Java.io.EOFException while deploying RPD in OBIEE Cluster using Mbean

    I am using oracle.biee.admin:type=BIDomain.BIInstance.ServerConfiguration,biInstance=coreapplication,group=Service to deploy RPD on a clustered environment with 3 servers, I get the following error, it works fine on a single host, any clue ?
    Connecting using URL: service:jmx:t3://xxxxxxx/jndi/weblogic.management.mbeanservers.domainruntime ...
    Transaction addAvayaRepository failed with error: ; nested exception is:
    java.io.EOFException, review log to fix issue and re-execute.
    weblogic.rjvm.PeerGoneException: ; nested exception is:
    java.io.EOFException
            at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
            at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
            at javax.management.remote.rmi.RMIConnectionImpl_1036_WLStub.invoke(Unknown Source)
            at weblogic.management.remote.common.RMIConnectionWrapper$16.run(ClientProviderBase.java:918)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
            at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
            at weblogic.security.Security.runAs(Security.java:61)
            at weblogic.management.remote.common.RMIConnectionWrapper.invoke(ClientProviderBase.java:916)
            at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:1017)
            at com.avaya.reporting.bi.config.MBeanTransaction.invoke(MBeanTransaction.java:374)
            at com.avaya.reporting.bi.config.MBeanTransaction.invoke(MBeanTransaction.java:349)
            at com.avaya.reporting.bi.config.MBeanTransaction.doDomainCall(MBeanTransaction.java:314)
            at com.avaya.reporting.bi.config.MBeanTransaction.lockDomain(MBeanTransaction.java:290)
            at com.avaya.reporting.bi.config.MBeanTransaction.execute(MBeanTransaction.java:200)
            at com.avaya.reporting.bi.config.MBeanConfigExecutor.execute(MBeanConfigExecutor.java:147)
            at com.avaya.reporting.bi.config.RunBIConfig.runXmlTransaction(RunBIConfig.java:127)
            at com.avaya.reporting.bi.config.RunBIConfig.runConfig(RunBIConfig.java:99)
            at com.avaya.reporting.bi.config.RunBIConfig.main(RunBIConfig.java:84)
    Caused by: java.io.EOFException
            at weblogic.rjvm.t3.MuxableSocketT3.endOfStream(MuxableSocketT3.java:345)
            at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:827)
            at weblogic.socket.SocketMuxer.deliverEndOfStream(SocketMuxer.java:761)
            at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:958)
            at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:889)
            at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:339)
            at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
            at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
            at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
            at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)

    Thanks for your replies !!
    In any of the RPD deployments I'm getting the same error , not for some particular RPD .
    FYI , yesterday (before this issue) I had a issue with starting presentation services , so as adviced in forum I replaced the files sawguidstate and sawguidstate.atrin the location:
    <Instance_Home>\instances\<instance_name>\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\<project>\root\system\mktgcache\<name>
    with the same files from a backup or from another working OBIEE 11g (11.1.5)instance.
    plese refer : Re: Unable to start presentation services , in OBIEE 11g
    Is this causing the deployment issue ?

  • Regarding assigning permission to dashboard to a catalog group in obiee 11g

    Hi All,
    i have a dashboard : trainee .
    i have created one catalog group that is: GroupA
    now i have assign some user to it.
    now i want to assign permission to the trainee dashboard to the groupA.
    i tried to do that but when i am doing login obieee by using any user that has assigned to group A.
    but i am not able to see trainee dashboard.
    can anyone tell me the steps for doing it.

    Hi,
    http://www.varanasisaichand.com/2011/03/obiee-11g-security-creating-users-and.html
    hope it helps
    Thanks,
    satya

  • Catalog validity period in SRM-MDM

    Hi
    I am using SRM-MDM v 7.1.
    In the subtable 'Catalogs' you can create a catalog name and specify the validity dates of that catalog:
    You can then assign a Catalog ID to each item in the main Catalog items table.
    The problem is that there does not appear to be a way to create a Named Search around the validity dates of the Catalog.
    I know there are various other ways I can achieve the hiding of expired items but it seems strange that the standard product does not make use of the validity dates in the Catalog subtable.
    I just wanted to check that I am not missing something with the use of the Catalog subtable.
    Many thanks
    James

    I've done some research and it appears that in the Free-From search I can write an Expression Search and then save this as my Named Search.
    Can anyone tell me how to write an expression for Validity Period End Date is lower than today?
    Thanks
    James
    IS_LOWER (Supplier Catalog Name. Validity Period - End Date)

  • How to do catalog validations through CA

    Hi,
    How to do field validations in BCC while somebody is editing/publishing catalog from CA? Please share document references if any.
    Gopi

    any suggestions..

  • Cannot access catalog Manager in OBIEE 11g

    When I used OBIEE 10g, I was able to access the Catalog Manager from windows if I installed the Admin Tools.
    Now that I am using 11g and dowloaded the Admin Tools for 11g... I no longer see catalog Manager.
    I use this often to move reports from one catalog to another. What can I do???
    Environmet:
    Application Server: Linux Oracle Linix R5U4
    Database Linix Server Oracle 11g.2.0.3
    OBIEE 11.1.1.5
    Tyhank you
    Steve Brault

    It is also available in 11g also with server installation. you might need to navigate to the following folder
    Windows: ORACLE_INSTANCE\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalogmanager\runcat.cmd
    Linux : ORACLE_INSTANCE/bifoundation/OracleBIPresentationServicesComponent/coreapplication_obips1/catalogmanager/runcat.sh
    Thanks
    Jay.

  • How to install only catalog manager in obiee 11g client

    hi,
    i have obiee 11.1.1.5 sever on linux & client on windows.
    since obiee 11g client does not comes with catalog manager.
    how to install only catalog manager on windows machine.
    Just to access catalog manager, Do i need to install fresh DB & OBIEE on windows?
    thanks,

    Hi,
    Download Client tool below link and also via BI Presentation Administration home page
    http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bus-intelligence-11g-165436.html
    Note: catalog manager is present in obiee11.1.1.6.0
    Thanks
    Deva
    Edited by: Devarasu on Oct 24, 2012 3:41 PM

  • Object Level security by creating catalog groups in OBIEE-10G

    Hi All,
    I have a requirement to display the dashboard based on the user login. Ex. Mike belongs to HR, Smith belongs to Accounts
    When Mike logs in he should see only these three dashboards. HR View, Common data1, common data2. When Smith logs in he should see only these three dashboards. Accounts view, Common data1, commondata2.
    The commondata1 and commondata2 dashboards has common reports for all the departments. The other dashboards are department specific with all different reports. How can I implement this?
    From one of my earlier posts I was advised to do it using Object Level security by creating catalog groups. Can you please provide me end to end instructions on how to create Object level security based on catalog groups.
    Thanks for your time and help.

    Hi,
    Mike to HR
    Smit - Account
    Yes, You achive by Object Level security by creating catalog groups
    1) Create Catalog group and users in RPD part(Ex: Account_grp,HR_grp)
    2)assign user to that particular group(let say Ex: Account_grp= Smith and HR_grp=Mike )
    3) login (Admin user id ) into dashboard page and --->mange dashboard page -->add users to that particular
    dashboard to relevent users and save it then
    try to login that mike and smith user it will work
    kindly refer below link
    http://www.rittmanmead.com/2010/01/obiee-10g-web-catalog-best-practices/
    http://www.rittmanmead.com/2007/05/obiee-and-row-level-security/
    thanks
    Deva

  • Hide Manage Catalog Button in OBIEE 10g

    Hi,
    Want to ask is there any specific privileges in OBIEE 10g that can be used to make manage catalog button inside answer area dissapear from specific group/user?
    Thanks & Best Regards,
    Frans

    OracleBI\web\msgdb\l_en\messages\catalogsysmessages.xml
    Search for text 'kmsgCatalogSysManageCatalog' and delete the text between the tags
    ex:
    <TEXT></TEXT>
    Restart Presentation service.
    If it is helpful, please mark as correct or helpful

  • OBIEE Cluster

    Hi Obiee Experts,
    Kindly help me plz.......
    I am going to implement OBIEE (10.1.3.4.1 version) Clustering (Active-Active) mode.
    I had refered oracle document but no luck, I have few query's can you please share me for inputs...
    · We need to install cluster controller or already installed default (OBIEE Enterprise Edtion)?
    · We need to install BI Presentations Plug -ins in server (we have already deployed obiee in weblogic) ?
    · In Production,I had installed OBIEE Enterprise Edtion version ,Does our current version allow us to operate in the OBIEE clustered mode ?
    . We have weblogic in production, If require to install BI Presentation servers plug -ins separately or we can use weblogic plug -ins ..
    Please post me for your valuable comments it's very urgent.........
    Advance thanks...
    satya

    Hi J.A.M,
    Thanks for quick response,
    In last point, again have to raise query here.
    I am struck in this point can you please clear me...
    • A Load Balancer serves as the entry point and load balances Oracle BI web requests to multiple web servers. Two scenarios for the web tier are shown.
    • The first scenario shows IIS as the web server with BI Presentation Services Plug-in (ISAPI) deployed.
    • The second scenario shows a J2EE based application server with BI Presentation Services Plug-in
    In Clustering where we configure BI Presentation Services Plug-in, I am not understand in this scenario.
    Can you please explain this BI presentation services plug-in part means (step by step what we do).

  • Automate RPD and Catalog Patching in OBIEE 11G

    Is it possible to automate the patching process with scripting? This would be the complete cycle: compare, generate xml patch and apply patch. I see that I can script the applying of the patch but need to be able to script the compare.

    Yes, You could accomplish this using the OBIEE 11g scripts.
    The one place you may want to reconsider the "complete cycle" is when it comes to actually patching the production RPD via automated fashion. I would leave that to remain as a manual redeployment after the patching to some stage folder/area, then manually deploy the RPD. This way you are certain to retain the incremental versioning that is now provided in the Fusion Console EM, etc.

  • Validation in OBIEE

    Hi Experts ,
    We have two prompt in our report. From Date and To Date.
    We need to make sure that From Date is smaller than To Date
    For example From Date 01-01-2009 and To Date 01-04-2009
    Is there any way to validate that From Date will be smaller than To Date.
    IF the end user selects From Date greater than To Date he should get a Pop Error Message.
    Could any one of you please let me know how to achieve this.
    Thanks In Advance.
    Cheers,
    Andy
    Edited by: Andy637020 on May 14, 2009 9:34 PM

    Hi,
    see this below link for validation
    http://shivabizint.wordpress.com/2009/04/21/date-between-validation-for-dashboard-prompt/
    Regards
    Naresh

  • Qualification Catalog : Validity & Depriciation Meter

    For a position we require that the degree\qualification (e.g. MBA) of applicant is not more then 2 years old.
    how can this be incorporated while creating a qualification?.

    Dear Billal,
    While creating qualification go to last tab addational data. i hope u can manage it from that.
    Cheers
    Nawaz

Maybe you are looking for