Catalogs from which users can shop?

Hi
I need to find out the catalogs for which a particular user can shop. Is this info stored in some table or is there a FM to get this info ?
Thanks

Hi Ankur,
As informed by Robin, you can maintain the Catalog ID concerned in the "CAT" attribute for that particular user there by restricting the user for accessing specific catalogs.
Hope this resolves your issue.Clarifications are welcome.
Rgds,
Teja

Similar Messages

  • Using two T lists i want to create a UI, from which user can make selection

    I want to create a UI in forms 6i, wherein there will be two T lists on the same canvas. I'll populate the left one from the record group and then make selections to the right one using four buttons in between.
    I'm using the add_list_element, delete_list_element, get_list_element_label, get_list_element_value built ins to do that. But it is not working properly. Giving a lot of forms errors.
    The same thing can be done in JDeveloper using a shuttle bean.
    An example of the UI that i want to construct :
    The kind of UI that i'm talking can be seen when we construct a new form manually, then we goto data block wizard. There we browse for a table and the wizard gives the list of the columns for that table, from this list selections can be done using the four buttons in the same way that i intend my form to do. This is the kind of UI i want to develop.
    I'm very new to development in forms. I'm sure you people at OTN will help me.
    Thanks,
    Abhishek.

    Hi Abhishek
    What is happening by these
    Copy(v_value, p_tlist_into); and
    ...This commans set list item value (list selection).
    The most simple way to move all elements between lists is to populate the target list from record group, and the to clear the source list. The lack of the given method - order of elements will be same, as in group.
    PROCEDURE Move_All_Elements (p_tlist_from VARCHAR2, p_tlist_into VARCHAR2) is
    v_value VARCHAR2(100);
    v_label VARCHAR2(100);
    v_index_from NUMBER;
    v_index_into NUMBER;
    v_count_from NUMBER; -- Count elements of tlist_out
    BEGIN
    --v_index_from := Get_List_element_count(p_tlist_from);
    -- Get_List_element_count never return zero!
    v_index_from := Get_List_Current_Index(p_tlist_from);
    if v_index_from = 0 then -- The source list is enpty
    --fnd_message.debug('elements=0, so return');pause;
    RETURN;
    end if;
    --v_index_into := Get_List_element_count(p_tlist_into);
    v_index_into := Get_List_Current_Index(p_tlist_into);
    if v_index_into = 0 then -- The target list contant only DEFAULT value
    --fnd_message.debug('no elements, so clearing the list');pause;
    clear_list(p_tlist_into);
    end if;
    v_count_from := Get_List_element_count(p_tlist_from);
    FOR i IN 1..v_count_from
    LOOP
    v_label := Get_List_Element_Label(p_tlist_from, i);
    v_value := Get_List_Element_Value(p_tlist_from, i);
    --Add_List_Element(p_tlist_into, v_index_into, v_label, v_value);
    Add_List_Element(p_tlist_into, v_index_into+i, v_label, v_value);
    -- The commands are lower in a loop are not necessary.
    -- The commands after the loop make too most.
    --Copy(v_value, p_tlist_into);
    --Delete_List_Element(p_tlist_from, i);
    --v_index_from := Least(v_index_from, Get_List_Element_Count(p_tlist_From));
    --v_value := Get_List_Element_Value(p_tlist_from, v_index_from);
    --v_value := Get_List_Element_Value(p_tlist_from, v_index_from + v_index_into);
    --Copy (v_value, p_tlist_from);
    --fnd_message.debug('done for one element');pause;
    --exit when v_label is null;
    END LOOP;
    clear_list(p_tlist_from);
    v_value := Get_List_Element_Value(p_tlist_into, v_count_from + v_index_into);
    Copy (v_value, p_tlist_into);
    EXCEPTION
    when others then null;
    END;

  • Restrict Which Users Can Enter Data In List Form in SharePoint Foundation 2013

    Is there a way to restrict which users can enter data in particular fields in a list item entry form?
    We are using a SharePoint Foundation 2013 list and calendar to manage vacation time. We need to restrict non-supervisor users users from entering a value in a certain field in the vacation request form.
    Here is how the system works now:
    1. Employees complete the vacation request form (which creates a list item)
    2. An email is sent to their supervisor to either approve or decline the request
    3. Approved requests are automatically entered onto the vacation calendar
    We have restricted the list so that only supervisors can edit items (the pending vacation requests). The problem is that all users can mark their own requests as approved when they fill out the request form in the first place. Is there a way to restrict
    which users can enter data in particular fields on a list item entry form?

    Thanks for the suggestion. We ended up 1) hiding the approval column and 2) creating a second list, workflow, etc. The user no longer sees the approval column when filling out the form. Requests are now submitted to list A. Workflow #1 copies the request
    to List B, then deletes the item from List A. Once the request is added to List B, Workflow #2 emails the user that the request has been received and emails the supervisor that a request needs to be approved. Only supervisors have editing permissions on List
    B. Approved requests are automatically added to the vacation calendar (the calendar view of List B).
    We found the following site to be helpful in learning how to hide the list column:
    http://community.bamboosolutions.com/blogs/bambooteamblog/archive/2013/06/03/how-to-hide-a-sharepoint-list-column-from-a-list-form.aspx

  • OS X Server Error: No existing connection from which credentials can be copied. It will not let me get out of the screen.  I have to close the Server App to get out. Any suggestions?

    Editing any user profile, when I try to save the change I get the error: no existing connection from which credentials can be copied. It will not let me get out of the screen.  I have to close the Server App to get out. Any suggestions?

    This is also being disucssed somewhere else https://discussions.apple.com/thread/5486117. I have the same problem, sorry i can't help.

  • No existing connection from which credentials can be copied

    Hi Everyone.
    I am new to OS X and due to some silly mistake I disabled network user login
    Now when I am trying to enable these user I am getting this message "no existing connection from which credentials can be copied"
    Can someone pl. help me

    Hello Techmission_Ind
    Try out the steps in the article below as it has helped me in the past with issues creating a network accounts.
    OS X Server (Mavericks): After upgrading or migrating, network user cannot be created
    http://support.apple.com/kb/HT200018
    Regards,
    -Norm G.

  • Is it possible to get the URL from which user came to Apex Application?

    Hi,
    I have 1 web site which is created by Apex. And I have to create similar sites with slight differences. For example, even though the contents are almost same, each telephone # have to be modified.
    So, if possible, I want to use only 1 web site and depending on the URL from which user came, change some information on the page. Is it possible?
    And if it is possible, what if the user set Apex URL as favorite and visit it after some days?

    Thank you Scott,
    This is the one.
    But I have another issue.
    If a user comes to our page from their link directly, I can identify where he come from. But if he added our site to Bookmark and comes to our site through the link, is it possible to identify his original route?
    If it is impossible, I will create other Apex Application and put each URL to the link in order to catch where the user is from.

  • I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to my TV. I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my Den.

    I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

    I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

  • From which table can we get the status of sales order

    hi
    from which table can we get the status of sales order

    Hi
    Check the Table <b>VBUK for HEADER level status</b> of Sales order
    and <b>VBUP for Item level statuses</b>
    enter VBELN  = Sales order and VBTYP = C for sales orders
    as VBUK and VBUP stores all Sales documents like deliveries, Invoices, quotations, contracts etc
    <b>Reward points for useful Answers</b>
    Regards
    Anji
    Message was edited by:
            Anji Reddy Vangala

  • From which table can I display PGI (material and quantity)for a spesific cu

    Dear gurus,
    From which table can I display PGI (material and quantity)for a spesific customer order?
    Thanks in advance

    HI
    PGI and material quantity can be available in MSEG table
    for this enter the sales order number in KDAUF or* MAT_KDAUF* fields in MSEG table
    Also try with LIPS delivery item table and LIKP table
    regards
    SAP SD
    Edited by: sapkpit_sd on Jul 22, 2010 8:14 AM

  • From which node can "insurance data" be created in SPRO?

    hi,
    from which node can "insurance data" be created in SPRO? I mean the Insurance company names and other details.

    Hi,
    Personnel Administration -> Payroll Data -> Insurance -> Create Insurance Companies
    Hope this will resolve your query.
    Regards,
    Naveen.

  • What is the URL from which I can download Firefox 10 for Mac?

    I cannot use Firefox 11 for Mac because it does not yet support a security add-on that I require. So I want to downgrade to Firefox 10 for Mac in both the 32-bit and 64-bit versions.
    However, I have been unable to find the URL from which I can download these two versions of Firefox 10 for Mac. Yes, I tried putting various keywords into the search box: "download" "Firefox" "previous versions" "downgrade" etc. Still I couldn't locate the URL.
    Would you be so kind as to send me the URL?

    Just replying to help keep track of the thread. I have been looking also. I can find where to load version 3.6 - but not 10.0.2
    We are having printing problems with 11 that we never had with 10 :-(

  • After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?

    After updating my iphone 5s to 7.1 ... the keyboard is crashing and it takes too long to respond, what is the solution? if there any link from which we can download the original 7.1 firmware for A1533 Version?

    Restoring the iPhone will reload its firmware.
    Plug the iPhone into (the current version of) iTunes on your computer.
    Let it sync.  Then choose "Restore" from the iPhone's summary page in iTunes.

  • Filed in the ALV report in which user can enter text manually

    Hi,
    Is it possible to enter a field in the report where user can enter data manually and save it in a ALV report?
    If yes then let

    Hi, SATYA
    Test the following Sample Report it hope it will solve out your Problems related to ALV.
    REPORT  zfsl_alv_test.
    TYPES: BEGIN OF t_it,
      mname(10),
      amount1 TYPE p,
      amount2 TYPE p,
    END OF t_it.
    *TABLES : it1_sum.
    TYPE-POOLS : slis.
    *VARIABLES
    DATA : check(1),
           rep_id TYPE sy-repid.
    *INTERNAL TABLE TYPE OF t_name
    DATA: it1_sum TYPE STANDARD TABLE OF t_it WITH HEADER LINE,
          wa_it1_sum TYPE t_it,
          it2_sum TYPE STANDARD TABLE OF t_it WITH HEADER LINE,
          wa_it2_sum TYPE t_it.
    *List Header
    DATA : it_listheader TYPE STANDARD TABLE OF slis_listheader WITH HEADER LINE,
           wa_listheader TYPE slis_listheader.
    *Event Raising to Display Heading.
    DATA: event TYPE slis_t_event,
          event_str TYPE slis_alv_event.        "Event String.
    *FIELD CATALOG
    DATA : it_field TYPE slis_t_fieldcat_alv,
           wa_field TYPE slis_fieldcat_alv.
    *SORTING
    DATA : it_sort TYPE slis_t_sortinfo_alv,
           wa_sort TYPE slis_sortinfo_alv.
    *Layout
    DATA : wa_layout TYPE slis_layout_alv.
    INITIALIZATION.
      check = 'X'.
      rep_id = sy-repid.
    START-OF-SELECTION.
      wa_it1_sum-mname = 'BBB'.
      wa_it1_sum-amount1 = '-500'.
      wa_it1_sum-amount2 = '-200'.
      APPEND wa_it1_sum  TO it1_sum.
      wa_it1_sum-mname = 'BBB'.
      wa_it1_sum-amount1 = 100.
      wa_it1_sum-amount2 = 200.
      APPEND wa_it1_sum  TO it1_sum.
      wa_it1_sum-mname = 'CCC'.
      wa_it1_sum-amount1 = 500.
      wa_it1_sum-amount2 = 10000.
      APPEND wa_it1_sum  TO it1_sum.
      wa_it1_sum-mname = 'CCC'.
      wa_it1_sum-amount1 = 105000.
      wa_it1_sum-amount2 = 20500.
      APPEND wa_it1_sum  TO it1_sum.
      wa_it1_sum-mname = 'AAA'.
      wa_it1_sum-amount1 = 21000.
      wa_it1_sum-amount2 = 22000.
      APPEND wa_it1_sum  TO it1_sum.
      wa_it1_sum-mname = 'BBB'.
      wa_it1_sum-amount1 = 5500.
      wa_it1_sum-amount2 = 2200.
      APPEND wa_it1_sum  TO it1_sum.
    *          Heading
      wa_listheader-typ = 'H'.
      wa_listheader-info = 'ALV TEST Top-of-Page'.
      APPEND wa_listheader TO it_listheader.
    *          FIELD CATALOG
      wa_field-col_pos = 1 .
      wa_field-tabname = 'IT1_SUM'.
      wa_field-fieldname = 'MNAME'.
      wa_field-seltext_m = 'Material Number'.
    *ls_fcat-do_sum = 'X'.
      APPEND wa_field TO it_field.
      CLEAR wa_field.
      wa_field-col_pos = 2 .
      wa_field-tabname = 'IT1_SUM'.
      wa_field-fieldname = 'AMOUNT1'.
      wa_field-seltext_m = 'Amount 1'.
      wa_field-do_sum = check.
      wa_field-edit = 'X'. " To add this you can edit any Colum
      wa_field-edit_mask = 'V___________'.  " Use this to place the (-) Minus Signe on the left side
    *ls_fcat-do_sum = 'X'.
      APPEND wa_field TO it_field.
      CLEAR wa_field.
      wa_field-col_pos = 3 .
      wa_field-tabname = 'IT1_SUM'.
      wa_field-fieldname = 'AMOUNT1'.
      wa_field-seltext_m = 'Amount 2'.
      wa_field-do_sum = check.
      wa_field-edit_mask = 'V___________'.
    *ls_fcat-do_sum = 'X'.
      APPEND wa_field TO it_field.
      CLEAR wa_field.
    *          SORT By MNAME
      wa_sort-spos = 1.
      wa_sort-fieldname = 'MNAME'.
      wa_sort-tabname = 'IT1_SUM'.
      wa_sort-up = check. " Here Use u2018downu2019 for descending Order
      wa_sort-subtot = check.
      APPEND wa_sort TO it_sort.
      CLEAR wa_sort.
    *          ALV Layout Setting
      wa_layout-zebra = 'X'.
      wa_layout-colwidth_optimize = 'X'.
    *          Calling function to raise event to display heading and icon above ALV
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
         i_list_type           = 0
       IMPORTING
         et_events             = event[]
    * EXCEPTIONS
    *   LIST_TYPE_WRONG       = 1
    *   OTHERS                = 2
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    *          Calling TOP_OF_PAGE Event
      READ TABLE event WITH KEY name = 'TOP_OF_PAGE' INTO event_str.
      IF sy-subrc = 0.
        MOVE: 'TOP_OF_PAGE' TO event_str-form.
        APPEND event_str TO event.
      ENDIF.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
    *   I_INTERFACE_CHECK                 = ' '
    *   I_BYPASSING_BUFFER                = ' '
    *   I_BUFFER_ACTIVE                   = ' '
         i_callback_program                = sy-cprog
    *   I_CALLBACK_PF_STATUS_SET          = ' '
    *   I_CALLBACK_USER_COMMAND           = ' '
    *   I_CALLBACK_TOP_OF_PAGE            = ' '
    *   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
    *   I_CALLBACK_HTML_END_OF_LIST       = ' '
    *   I_STRUCTURE_NAME                  =
    *   I_BACKGROUND_ID                   = ' '
         i_grid_title                      = 'ALV Test'
    *   I_GRID_SETTINGS                   =
         is_layout                         = wa_layout
         it_fieldcat                       = it_field
    *   IT_EXCLUDING                      =
    *   IT_SPECIAL_GROUPS                 =
         it_sort                           = it_sort
    *   IT_FILTER                         =
    *   IS_SEL_HIDE                       =
         i_default                         = 'X'
         i_save                            = 'X'
    *   IS_VARIANT                        =
         it_events                         = event[]
    *   IT_EVENT_EXIT                     =
    *   IS_PRINT                          =
    *   IS_REPREP_ID                      =
    *   I_SCREEN_START_COLUMN             = 0
    *   I_SCREEN_START_LINE               = 0
    *   I_SCREEN_END_COLUMN               = 0
    *   I_SCREEN_END_LINE                 = 0
    *   I_HTML_HEIGHT_TOP                 = 0
    *   I_HTML_HEIGHT_END                 = 0
    *   IT_ALV_GRAPHICS                   =
    *   IT_HYPERLINK                      =
    *   IT_ADD_FIELDCAT                   =
    *   IT_EXCEPT_QINFO                   =
    *   IR_SALV_FULLSCREEN_ADAPTER        =
    * IMPORTING
    *   E_EXIT_CAUSED_BY_CALLER           =
    *   ES_EXIT_CAUSED_BY_USER            =
        TABLES
          t_outtab                          = it1_sum
    * EXCEPTIONS
    *   PROGRAM_ERROR                     = 1
    *   OTHERS                            = 2
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    *&      Form  top_of_page
    *       text
    FORM top_of_page.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary       = it_listheader[]
          i_logo                   = 'ENJOYSAP_LOGO'
    *   I_END_OF_LIST_GRID       =
    *   I_ALV_FORM               =
    ENDFORM.           "top_of_page
    Kind Regards,
    Faisal

  • HT3787 If you accidentally eject that local file (plain white disk image) from another user, can you get it back?

    If you accidentally eject local file from mobile me from another user, how can you get it back? Or is it stored somewhere else????
    My website was saved on there. And I need it!!
    I didn't realize that was the idisk since mobileme has been gone for so long.

    That's what I was hoping.  I use Time Machine to back up the entire computer.  But I'm assuming it was a disk image, and that wouldn't be saved on the backup?  Or where could I find it?

  • HT201303 I recently bought a MacBook Pro and want to purchase music in iTunes. Can I add my new computer to the computer list from which I can purchase music? I could switch computers if necessary.

    I recently bought a MacBook Pro and am trying to purchase music from iTunes. For security, it says that I have a different computer trying to purchase music. Can I switch the computer I purchase my music from?

    You can purchase music from up to 5 computers at once.
    Just sign in and buy

Maybe you are looking for