Catalogue profiles

How are catalogue profiles created and linked to an equipment.
Are the catalogue profiles defined in spro?

Hi
Code and code groups are created in QS41 , Then while creating the catalog profile you can specify whether the particular codes should be available for selection in notification ( catalog profile should be assigned to equipment or functional location)
Regards
Thyagarajan

Similar Messages

  • QM_Code group assignment to catalogue profile

    Dear QM Consultants,
    I am trying to assign one code group to catalogue profile through OQN6 transaction.
    The case can be put as follows
    e.g.
    Catalogue profile     : ABCD
    It contains 4 code groups (A, B, C and D) from catalogue 9.
    Each of these code groups i.e. A, B, C and D contains 4 codes as follows
    Code group          Codes
    A                           a1, a2, a3, a4
    B               b1, b2, b3, b4
    C               c1, c2, c3, c4
    D               d1, d2, d3, d4
    where small letters indicate codes
    1.     There are 3 servers as development, quality and production.
    2.     At initial data migration above data is present in all the 3 servers.
    3.     In due course of time it happened that codes were added to code group A as a5, a6 and a7   in production server directly. That means codes a5, a6 and a7 DO NOT EXIST in development and quality server.
    4.     Now at such scenario another code group Y is created with codes y1, y2, y3 and y4 in all the servers by transport request mechanism.
    5.     The requirement is to assign this newly created code group to catalogue profile ABCD though request only since production server has status as non modifiable for OQN6 transaction.
    My query is, whether system will throw any errors while transporting request for assignment of code group Y to catalogue profile? Is there any solution to assign this new code group to this catalogue profile. Kindly note all the codes under this code group Y are present in all the 3 servers.
    Thanks in advance,
    Best Regards,
    Anand Rao

    Hi Gajesh,
    Thanks for prompt reply.
    Well, as suggested by you, the option may work. I need to test the same.
    Other way round, I feel whatever scenario I have mentioned above it will not create any problem to assign Y code group to catalogue profile, because while assigning the request which it generates in development server; contains T352C, T352B tables only. It is not affecting QPCT or QPCD tables.
    Thatu2019s why I feel it wonu2019t create any problem, but I am not so confident. Well as you rightly said, let's wait for otheru2019s opinion also.
    Have a great day ahead,
    Best Regards,
    Anand Rao

  • Person Responsible for Task is blocked for update in task catalogue in notification

    Hi experts ,
    I don't understand how come in one of my notification type, the field named "Responsible" , is open for update , however in anther notification type it is closed (the background of the field is light blue instead of white. white meaning open for update)
    Both notification types consist of Task catalogue, Task sub screen, but different catalogue profile  (the catalogue profile suppose to determine different catalogue code groups but nothing else)
    Both notification types consist partner determination procedure which consist one identical partner function Person responsible (code: VW)
    Please advice.
    Thanks ,
    Daniel

    Hi Daniel,
    possible reason could be the customizing settings for the field selection in the notification. Maybe the field "Responsible" VIQMSM-PARNR is not ready for input (= only display) for the notification type you mention.
    Check if the field is influenced by the notification type.
    Regards

  • Catalogue issues

    Dear All
    I have created a catalogue and assigned to the equipment in IE01.
    In notification after enter the equipment no; I got a message at the bottom i.e catalogue profile copied from equipment.
    But I am unable to see the same in the Items, Causes, Tasks and activities Tab
    When I am trying to select the FL with equipment, FL it is not taking.
    Further in the order with same equipment, I am unable to see catalogue (assigned in IE01) in the operations tab.
    Please suggest me the possible solution with spro settings etc.
    And last, what is the difference between, FL, Equipment & Notification Catalogues, can we assign the same use at all.

    Procedure as follows
    1. Edit catalogues (QS41)- create new code groups & codes under one type of catalogues say for creating all codes & code groups for object parts you need to choose catalogue type B, similarly for Damage choose C. You can create your own Catalogue type also.
    2. Define catalogue profile-(OQN6) - Assign catalogue & code groups to one profile
    3. Then assign Catalogue profile to equipment/ FL or notification etc
    4. When you create a notification & assign the reference object equipment then catalogue profile of that equipment will be copied to the notification- if the equipment do not have catlogue profile then profile of notification will maintained.
    Reference object (equipment or FL) takes the priority over notification
    When you assign both functional location & equipment- catalogue profile of the equipment will be copied (equipment takes 1st priority)
    Then you have to assign the respective object part codes, damage codes & cause codes from the default list only
    shakti
    Edited by: SHAKTI BEHERA on Feb 9, 2012 9:19 AM

  • QM_INCOMING INSPECTION WITH PARAMETERS VARIATION

    Dear QM Consultants,
    Wish you a very happy new year 2009!
    I came across a scenario,
    1.     Client does incoming inspection. Activation of 01 inspection type in materials master.
    2.     Interesting fact is that client the inspection parameters vary at every inspection lot for the same material.
    3.     For example, letu2019s take material 123 as the material for incoming inspection. For GR number 001 it length is 1000 + / -2 mm
    4.     For the same material code in next consignment the length is 800 +/- 1.
    5.     The parameter is same i.e. length but its dimensions vary at every lot. This variation is not systematic. I mean there is no definite pattern that after every 2 or 3 lots length will be so and so. It may be anything.
    6.     Client does not want to create separate material codes for this.
    7.     Also based on above parameter (LENGTH) another parameter say Area has to be calculated.
    I opted following solution,
    1.     Create MIC as LENGTH as incomplete model in QS21.
    2.     Prepare an inspection plan excluding above parameter i.e. LENGTH
    3.     Whenever lot gets generated user has to add MIC in inspection lot while result recording i.e. by create additional characteristic.
    4.     For area calculation I could not find any solution yet since calculated characteristics do not work for additionally added characteristics.
    Is there any other solution to this problem?
    Your expert comments please!
    Best Regards,
    Anand Rao

    Thanks very much, Shyamal, Gajesh, Ghanshyam, and Vinay for so prompt replies,
    1.     I will proceed as suggested by Shyamal as this seems to be easier way rather than local addition of MIC in inspection lot.Thanks Shyamal!
    2.     Whatever Vinay is saying thatu2019s also interesting. This is really a value addition for me.
    3.     Gajesh, this input processing method is completely new to me. Can you please send some more stuff or link so that I can test it in system. Thanks for your suggestion also.
    Also Dear Experts,
    Please go through following links. These are other twos questions posted by me.
    QM_Code group assignment to catalogue profile     Catalogue profile
    QM_LSMW BY RECORDING METHOD FOR QP01     LSMW by recording method for inspection plan
    I am sure; all of you can definitely throw some light for these issues.
    Thanks once again as my problem is resolved.
    Best Regards,
    Anand Rao

  • User exit for IW28

    Hi experts,
    I have question regarding user exit for IW28 tcode:-
    1) When you goto IW28 and double click on any "Notification" which does not have "Functional location".
    2) Then on "Notification" TAB if you put "Functional location" in "Functional loc." field then it automatically changes Cost Center, WBS Element and SettlementOrder fields in "Location" TAB, and these fields will be changed correspondence to the "Functional Location" entered in "Notification" TAB.
    But we don't want that. In "Location" TAB we don't want these three fields Cost Center, WBS Element and SettlementOrder to get updated whenever we enter "Functional Location" in "Notification" TAB.
    We want "Location" TAB fields should have what ever it had initially and not changed whenever we enter Functional Location in "Notification" TAB.
    I am looking for some user-exit to stop this. Please help me for 1) which user exit i should use and 2) how to proceed.
    Thank You Very Much!!
    .mala

    hi mala,
    in iw21/iw22 or iw28 when ever you you change the tech object f.loc or eqpt that data in the location tab and some more data like catalogue profile are taken from the f.loc /eqpt master records and when ever you change the tech object this data again pulled fom the respective master record but if you dont want thse fields to be updated then do not maintain in ie02/il02 ... but i suggest you to maintain this data as it would be easy in processing ..
    regards
    pushpa

  • Is Codes creation in QS41 possible against language specific?

    Hi
    When we are looking the notifcation catalogue profile, we could maintain the same against the language specific. I mean in configuration the transalation is possible.
    However against the same catalogue its code (damage, activities, objects etc) could be created with its specific language and there is no transalation available.
    Can you tell me how could handle this scanario. Since now we want to maintain the codes for IT, FR , ES language against its profile. Is required to create each one with QS41?
    Thanks

    HI,
    I don't know your exact requirement
    But to maintain different language for codes in QS41
    Select the codes you need to maintain  Menu --> Edit --> Translation --> select language and enter

  • Defect Valuation

    In Table QMFE-Quality Notification items, the field FEHLBEW-is defect valuation.Where in the transaction QM03 items I can see this field?
    Vishnu

    hi ,
    For getting the defect valuation field under item overview tab you need to do some configuration setting for your notification type.
    Check SPRO>Quality management->Quality Notification--->Defects Recording.
    You need to Define Defect Valuation for Catalog Profile & need to assign that catalogue profile to the notification type & report.
    Apart from this also define confirmation profile,in the confirmation profile, you specify which fields are to appear on the screens when you record defects and whether the user must enter data in these fields.
    see the sap standard config documentation also for more clarity.
    Cheers,
    Tushar

  • Equipment-Creation

    Hi Guys,
    I have no. of roll assemblies having the motor capacity 1.5 to 2 KW.Some time we replace the complete assemblies and some time we repair on the spot.My concern is that whether i should create as an equipment or something else.but the problem is that if im going to creating an equipments the No. become very large nearly 10000 rolls equipments apart from others .Can anybody suggest what should i do.In earlier post i got the answer that i should go for equipments insteed of creating a assemblies.But the problem is that motor is very small capacity.Please give your valuable suggestion to avoid any future problem as well making our structure userfriendly.If you have any better suggestion please.........
    AR
    Edited by: Amit  Rana on Feb 9, 2009 8:25 AM

    Hi AR,
    As per the standard if you need to maintain any history you need to maintain master Data such as assembly , equipment or Funtional Location. In reality sometimes it is very difficult to maintain thousands of equipment masters for the sake of it and on the other hand your persons who is creating the notification or order need to find the correct equipment number whenever they create. Which become cumbersome in enduser side
    It is completely your business call whether to maintain it has  master or not.
    In my experience ,In a single set of equipment it has around 500 small motors attached to it. Client doesn't want to maintain each an every motors as equipment master.Instead they want to know how many times motor has failed in the particular equipment. We maintained it using Catalogue profile in Equipment Master /Functional location . Whenever any breakdown or any maintenance took place it capture the data using Notificaiton and Maintenance Order.
    However there wont be any history specific to the motor it will get the record only to the main equipment or functional Location.
    Discuss wid your client the pros and cons  in detail .
    Regards
    DPS

  • Installation of camera profiles and x-rite Profiles show up only in a certain folder of a catalogue

    Dear all,
    I'm working in a Maverics environment on which LR 5 is running. I've tried to install the camera profiles for the Nikon D800 by copying them to the users Library/Applicaton Support/Adobe/CameraRaw/Camera Profiles. After re-starting LR the profiles didn't show up. In a second attempt I tried to impoprt them with the extention manager which didn't work.
    The second problem I'm facing is, that I've created camera profiles with x-rite. The profiles show up only in a certain folder in LR in the same catalogue. This means in this certain folder named shootings i can choose the x-rite porfiles. When I go -without leaving the catalogue- to an other folder ie. named sports, I can not see the profiles.
    It would be great if somebody has a useful idea
    Thank you very much in advance.
    Cheers Stefan

    See the instruction below for the location where your profiles should be placed. If they are placed in the same folder where Lightroom install package places the profiles created by Adobe they will not be recognized.
    Your custom Camera Raw & Lens Profiles should be installed to the User folders…
    Lightroom 5 no longer uses the shared ProgramData (Windows) / Application Support (Mac) folders for Camera or Lens Profiles. Instead, it stores the built-in profiles with its program files.
    When you create camera or lens profiles, they must be stored in the user locations listed below. If you previously stored custom profiles in other locations, you’ll need to move them to these user folders, otherwise Lightroom won’t be able to find them.
    Windows—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \ CameraProfiles \
    Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
    For the lens profiles, substitute the LensProfiles folder for the CameraProfiles folder.
    The camera and lens profile file extensions are:
    .dcpr—camera profile recipe file used for creating/editing a profile in the DNG Profile Editor
    .dcp—camera profile
    .lcp—lens profile

  • White Balance tool and Camera Calibration Profiles

    Downloaded Lightroom v4 Beta 1 for mac but the installer package failed to launch. (com.apple.installer.pagecontroller error -1.) So I've only watched the adobe tv presentations todate.
    Anyway just wanted to give some feedback as a pro photographer about use of Lightroom and improvments I would like to see in the next version.
    I am a commercial photographer who needs colour accuracy in photographing fashion/garment images - most of my work is reproduced on a printing press for catalogues and brochures. On average a shoot will yeild about 500 images for a client, so workflow is important as they normally want them all!
    As a previous user of Capture One Pro v6 and now lightroom v3.6 - the biggest issue I have with Lightroom is the dominace of red tint when setting the white balance from a gray card reference image, shot at the same time as the images to be processed. I'm not adding anything to the images other than doing a white balance, a tweak on exposure and camera neutral setting on profiles.
    To obtain a white balance setting I use the combination of an  Xrite white balance card and the Q-Card and the old fasioned Kodak Gray cards all mounted on the same surface. I've used spot and ambient light readings on the gray cards to measure exposure and I've used the Adobe DNG Profiler and the Xrite colour checker profiler with the large colour checker card as a reference, (I've made profiles for sunny days, cloudy days, dual illuminant etc etc) and I'm viewing my images on a colour calibrated apple monitor.
    Not withstanding all of the above the best results I get out of Lightroom are using the camera profile neutral setting! Everthing else is just too red!! even though the images do look more punchy; for accuracy of actual colour I choose the camera neutral profile.
    Well when I say best results, those for colour critical garment photography and skin tones, these results are similar to those obtained from capture one pro v6.
    So for the Lightroom v4 I would like to see.
    1. White balance RGB values in numbers rather than percentages.
    2. Add and delete a colour readouts points with a dropper tool on an image to enable more acurate colour balancing particularly in shadow areas - (already available on capture one pro and adobe photoshop)
    3. Curves adjustments in all RGB channels (think you've done this)
    4. Output to CMYK profiles.
    5. Individual levels channel adjustment for RGB
    6. Ability re-organize my tools palette (add and remove) is per Capture One and Photoshop
    Regards

    The legacy ACR X.x profiles are no more produced nor included for newer cameras (AFAIK, since ACR 5.1/LR 2.1). The Adobe Standard is the new default starting point for these.
    While I am at it....are the Canon camera profiles I downloaded for the 1Ds MKII the same as for the 5D MKII or do I have to download different one...I suspect they are the same or Lightroom wouldn't offer them to me...is that correct?
    The profiles are different for each camera model, even if they share the same name in the Calibration panel. If you can see them when developing 5DII files, it means the camera-specific profiles are installed for your particular camera model (otherwise, you wouldn't see them).

  • Help with working with color and profiles

    Like many others, I suspect, I am having trouble managing the colors on my iMac to match the prints I get. I have a few questions, but first, some background:
    1. Screen calibrated with Huey Pantone. Calibration was done with monitor brightness all the way to lowest. I don't use Shades or anything else. I have my Display Profile set to this profile. I'd be happy to post my .icc profile if I knew how. I can email it to anyone who can help here.
    2. I have been sending my prints to Costco with the option of turning OFF their Auto Correct. To try to get things to match, I downloaded Costco's printer profiles from http://www.drycreekphoto.com/icc/Profiles/Minnesota_profiles.htm#MN (Eden Prairie, Glossy and Lustre paper profiles).
    3. I shoot photos with a Canon XTi with color space set to sRGB. I am using iPhoto 08.
    So here are my questions:
    1. I loaded the Costco printer profile icc files into /Library/ColorSync/Profiles/Displays. When I open ColorSync, I see them under Profiles/Displays. However, in ColorSync/Devices/Displays/iMac, when I go to change the profile, I navigate to these files but the computer just beeps and won't take them. I thought all icc files could be used by monitors and printers - can these Costco iccs only be used for printers (I noticed the Costco files are 4MB, the other display iccs are 4KB)?
    2. How does iPhoto handle color spaces? I import my photos off my CF card. Under iPhoto / Prefs / Advanced, I have both Copy Items and Embed ColorSync Profiles checked. Which color profile is it embedding? The one from the camera (some generic sRGB) or the one my display is using (the Huey)?
    3. As a test, I exported my photo as a full size TIFF (a 3.3MB jpeg became a 28MB tiff). I opened the TIFF in Preview. Preview / Tools / Assign Profile came up as "Camera RGB Profile" (so I think this answers question 2 but I'm not sure). While in Preview, if I now change the Display Profile (from Huey to Adobe RGB), the whole screen changes, including the photo I'm looking at in Preview - shouldn't Preview hold the photo the same since it's using a different color profile?
    4. I set the Display Profile back to Huey. In Preview, I go back to my photo and under Tools / Assign Profile I assign the profile my Huey profile (instead of Camera RGB). I save this as a jpeg and reimport into iPhoto. When I compare these two photos side by side in iPhoto, they look indistinguishable. Why, if on the original import iPhoto embedded the Camera RGB profile into the photo and I make a copy assigning the Huey profile do they look identical? There's no reason to assume that the Camera RGB and Huey profiles are the same! Or is it some trick where the Display Profile is overriding everything?
    5. Lastly, I reopened the original TIFF export in Preview and assigned it the Costco profile (happened to use the glossy one). Lo and behold, what appears on the screen is a much closer version to what I got back as a print. Finally, as one last tweak, I changed my Display Profile from Huey to Adobe RGB and the picture I saw in Preview was closer still to what I got back from Costco. I changed the Display back to Huey, kept the Costco profile assigned and saved my TIFF back to a JPEG. I imported into iPhoto and compared - it looks much closer to my Costco print.
    So I'm utterly confused. How do professionals manage their color workflow? Is my Huey calibration whacky? Why, if I assign a color profile to something in Preview, does it really depend on what Display Profile I have set (I thought profiles managed color, but it looks like it's relative).
    I apologize for the rather long post, and very much appreciate any help and suggestions here!
    Thanks!

    The contractual requirements between the vendor and your company may be the key. The contract may or may not discuss whether the vendor's permission to modify the material includes an obligation to make the documents usable. "Usable" may be construed to mean providing original files. If the vendor is required to provide originals, they may or may not be required to provide them in a common format, like MS Word, rather than the proprietary FrameMaker format they use. Their providing a PDF may completely satisfy their obligation; your lawyers may be helpful here.
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices
    bmr0330 wrote:
    I did ask them for the source file but they haven't been forthcoming with that. I may look into the evaluation copy of FM anyway but considering the price ($868 USD through our catalogue supplier) I doubt I would be able to get a licensed copy once the evaluation runs out. I do appreciate the suggestion though. Thank you. Brian

  • Lightroom Profiles for Lumix GX7?

    I'm trying out various programs for RAW processing using my new Lumix GX7. I quite like DXO Optics Pro 9 due to the camera and lens profiles for my equipment. However, it has limited functionality compared to Lightroom 5.6 which I'm also trying.
    I note the resources folder for Lightroom contains the file Panasonic DMC-GX7 Adobe Standard.dcp which appears to support the GX7. However, the Adobe folder does not contain any lens profiles for my Panasonic or Olympus lenses.
    Does Lightroom correct aberrations in these lenses in a similar fashion to DXO Optics Pro without me having to do anything? If I need a Lightroom lens profiles for Panasonic & Olympus lenses, where do I find these since they do not appear to be installed by Lightroom 5.6?

    Thanks, I can now see that the Lightroom RAW image is very similar to the DXO Optics Pro RAW image with distortion correction enabled in DXO Optics Pro. I can see a slightly wider FOV and more distorted image when the DXO Optics Pro distortion correction is turned off compared to Lightroom. Lightroom is obviously correcting the image distortion, although this is not obvious from the user interface. These results are using my Oly 9-18mm Micro 4/3 zoom at 9mm where the distortion is most evident.
    I have another curious query regarding "dead pixels" and DXO Optics Pro some of you may interested in commenting on at Lumix GX7 - Black / Dead Pixels: Micro Four Thirds Talk Forum: Digital Photography Review
    DXO Optics Pro marks various RAW pixels with a magenta cross with noise processing disabled and ACDSee Pro shows them as a black dot. I'm still unsure whether these are "dead pixels" or just pixels marked for particular analysis. Lightroom, SilkyPix and RawThreapee mentioned above have no "dead pixels" on initial RAW image import. Very curious.
    My personal preference for image rendering is DXO Optics Pro (despite the "dead pixel" issue) but I quite like Lightroom's cataloguing functionality.

  • Color profile changed in LR 5 installation?

    Hi,
    I installed LR5 from LR4 yesterday and each time I open an image in CS5 from my LR5, I get the following message:
    The document "IMG_9082.CR2"has an embedded color profile that does not match the current RGB working space.
    Embedded:  Adobe RGB (1998)
      Working  sRGB  IEC61966-2.1
    What would you like to do?
    -Use the embedded profiel (instead of the working space)
    -Convert documents's colors to the working space
    -Discard the embedded profile (don't color manage)
    My camera's settings have it set with sRGB, LR4 and LR5 have sRGB and I have CS5 workspace as sRGB.  This did not happen before.
    Is it possible that when LR5 updated the LR4 catalogue, it changed the profile of all my photos?  I don't know, maybe I've done something, but I can't see what as I don't remember changing anything.
    Thank you,
    Gloria

    When (if) LR asks you if you want to send a copy or an original, what are you chosing?

  • Skills Profile iView

    Hi All
    I want to get the Skills Profile iView to work on the portal. I have done the following configuration
    1. PD related config for Qualification Catalogue, Careers etc
    2. Home Page configuration to link Career and Job Workset to ESS role (It gets displayed on the Overview page)
    3. Service Specific Configuration.
               On this we have table T77S0 with switches
                  QUALI     DEST1
                  QUALI     DEST2
               In my place, there is no separate system for this functionality. Do I maintain my system name here?
    When I go to portal, on the overview page, i do have Career and Job and Skills profile as a quicklink. When i click on Skills Profile, it only takes me to Career and Job Page.
    Am I doing something wrong on the home page config?
    Also, is there any special license that needs to be purchased to activate these services?
    NB: Running ECC 6.0 backend SP 52 and Netweaver 7.00 SP17
    Please guide
    Thanks
    Sriram

    It was the home page config. I had put the PCD on the Page section instead of Resource

Maybe you are looking for

  • Accessing member variable within an anonymous inner class

    I'm getting a compiler error with the following snippet which resides in a constructor (error below):         final String fullNamesArr[] = new String[ lafsArr.length ];         String lafNamesArr[] = new String[ lafsArr.length ];         JMenuItem n

  • Re-assign a contact person BP from one bidder org BP to another

    Hi forum members, We have a situattion where we would like the ability to transfer a bidder contact person BP from one bidder org BP to another by means of an ABAP program. This will prevent us having to block the old contact person and create the sa

  • Weblogic server installation - multiple instances in different ports

    Hi I want to install weblogic server(10.0) in my system but it should have three instances running on different ports(equivalent to 3 servers running on the same host). The application hosted on one server will be interacting with the applications ho

  • Msql error when connect to webtogo.world

    Every time I run msql system/<password>@webtogo.world I get a No suitable Driver error. The Oracle DB is a in a different server and Mobile Server and the Mobile Kt are in a development machine. I can see the polite db with no problem using msql syst

  • Input Template: Deriving a member

    Hi All, I have the following situation - I have a Dimension "Account" which has a property Division I have another Dimension "Division" The property "Division" of Dimension Account is the same as the Dimension Division. In my Input template I have th