Catalyst 2950 and 3750 console not responding after successful boot

i just removed two switches from my ccie R&S lab but now i has a very strange problem switches is working fine but i can not access from console after boot .

Do you have any other devices you could use to check your terminal emulator is working? I had an issue with hyperterminal once, that it would not transmit following a reboot of the device it was managing. But in my case, re-booting the PC (with a proper power cycle) cleared the problem, so it couzld have been something to do with flow control.
Kevin Dorrell
Luxembourg

Similar Messages

ITunes and other applications "not responding" after impoting CD's

Hi....After I import songs from a my CD collection into into my iTunes (version 7.02) library, many applications, including iTunes, freeze up and are "not responding", and I'm forced to CTRL-ALT-DEL to "end task" on the unresponsive applications. For example, if I have my AOL browser running, I can no longer open new web pages after importing a CD on iTunes. Also, after closing the applications (via CTRL-ALT-DEL), nothing happens when I double click on them again to reopen the programs (again, including itunes itself). To be able to run the programs again I have to either restart the computer or log off my user ID and log back on. Any help would be greatly appreciated! Thanks in advance!
Dell Dimension Windows XP Pentium 4 - 2.52 GHz, 768 MB of RAM

I am having similar problem. After I imported songs
from CD and exit itunes, I try to log off and my
computer freezes up. It doesn't log off, screen goes
black. I can't do anything, not even ctr-alt-del. I
have to push button to power off. Does anyone know
whats going on? Help
Ok, I'm embarrassed that I didn't try this fix before posting my initial question, as any sane Windows user should know to try this troubleshoot early on for many Windows problems: Running the disk defragmenter solved the problem of my PC feezing after I imported a CD into iTunes. Katikat..I'm not sure how close your issue is to the problem I was having, but I suugest trying it if you haven't already. If you've never run the disk defrag it's easy: START -- All Programs -- Accessories -- System Tools -- Disk Defragmenter, then choose your hard drive(s). Depending on how much stuff is on your hard drive and how long it's been since you last defrag, this can take anywhere from 10 minutes to over an hour. Not sure if this will help with your problem, but worth a try. Best of luck. Piachet
Dell Dimension Windows XP

N7k console not responding even after proper boot, and even from rommon mode

N7k console not responding even after proper boot, and even from rommon mode

Try using a different application (putty) and test. If that does not work, RMA the sup.
HTH

App Store not responding after upgrade to OS X Mavericks and installing free Keynote, Pages and Numbers app

My App Store is not responding after upgrading to Mavericks and installing free Keynote, Pages and Numbers Apps.
Also I tried to reboot and restart and nothing happens still unresponsive.
Tried to click as many times as I can the App Store and it won't open.
Please Help.

Dongski
I had the same problem and solved it myself.
Please see discussion https://discussions.apple.com/message/23556072#23556072
Hope it helps

HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

My Firefox won't quit and gives a "not responding" message after I use Google Mail. I have tried starting in "safe" mode and the problem still occurs.

I have an issue where Firefox wont' quit and gives a "not responding" message after I have been using Google Mail. It works fine when I am not using that program. I have tried Safe Mode and the problem still happens when I go to Google Mail, so it is not connected with add-ons, extensions, etc.

Many site issues can be caused by corrupt cookies or cache. 
Clear the Cache 
'''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''
 and 
Remove Cookies '''''Firefox/Tools > Options > Privacy.''''' 
Under '''History''', select Firefox will '''Use Custom Settings'''. 
There is a button on the right side called '''Show Cookies'''. 
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; '''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''. 
Poke around safe web sites and see if there is still a problem. Then restart.

Browsers 'open' but do not respond after system reload

safari and internet explorer both exhibit similar behavior, not completely opening. Neither opens a window, and both fail to respond after posting command menu (file, edit, view, etc). force-quit is required to close.
this was all initiated by a software update during which multiple updates were installed.
immediatley after updates (starting with OS 10.3.9) I could not access the OS, as the startup would hang as it attempted to display the User Login window.
I reinstalled OS 10.3.3 from the original system disks.
- The internet connection is good (mail, iTunes connect just fine).
- The DNS server address definition is correct
- I created a test user account, same problem.
- Console shows the following text; 'Safari[359]* -[WebPreferences privateBrowsingEnabled]; selector not recognized
thanks in advance for your thoughts.
12" G4 pwrbk Mac OS X (10.3.3)

Hello Jim55 & Hawiian_Starman,
Before you repair permissions, run Software Update to get OS X to 10.3.9. Then follow Eme's helpful suggestions to remedy the Disk Utility error, which Apple hasn't addressed yet.
No, I think the OS 10.3.9 Combined Update should come AFTER the fix on the Disk Utility via removing the said files.
Since in my opinion and others, Disc permission repair should be run before an OS update and all Apple Updates.
Running on os 10.3.9, I have found permissions change often enough to warrant permission repair before the update.as well as after.
This issue makes it impossibe to run Disk permission repair .Therefore the
removal of the files should be first, NOT 2nd imo
Which lead to this thread i386 of personal experience and the little itunes helper most tout to put back.
Trashing it on 10.3.9 is the better idea, it will find its way back into Start up Items. as it did on mine.
I have trashed the itunes Helper it makes no difference in my ablitiy to buy music, play it or affect my iTunes Library.
Look for this in your Console, Jim if you don't remove it.
: for architecture i386 object: ./Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/MacOS/iT unesHelper malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 13 can't byte swap it)
An apple discussion topic on can't repair permission and really a myriad of other post in regards I need not include.
Regards,
Eme:'~[ )

I have Win 7 64bit and the computer "not responding" often.

The event logs show that Bonjour is the biggest problem in system failures and the computer Not Responding. Is there a fix for Bonjour or is there a way to run itunes without it?
If itunes is not compatible for windows 7 Does apple have something else to use for media?

Hello AEC396
It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting an errorabout missing drivers. I found a couple of resources that I think might help with an error like this.
I recommend starting with the steps in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M.

When I try to open firefox it says that it is not responding, after I disabled the adobe flash plug-in it worked, how do I get it to work with flash

Since I updated my adobe flash player firefox keeps saying that it is not responding after I open it and it loads my home page, I disabled add-ons and went throught the process of figuring out which one it was and it was adobe flash, but without flash I cant access a lot of different sites, how can I fix this. I have tried uninstalling and reinstalling both firefox and adobe flash, but neither works!

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

Premiere Pro CS6 not responding after adding anything to timeline

I had been using Premiere CS6 successfully for a while, but starting a few months ago, it started not responding after I did anything. I can add a title and a transition succesfully to the timeline and it plays fine, but as soon as I add a picture or video clip, it immediately stops responding. It's frustrating because the program used to work fine before.
The only thing I can think of that might have affected it was when I upgraded to Mavericks, but I haven't read anything about any serious problems with Premiere running on Mavericks. I have a late 2008 MacBook Pro.
Thanks in advance for the help.

Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
mavericks
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
I am Windows so did not bookmark the messages, but I have seen SOME message threads with SOME solutions for SOME mavericks problems

Safari do not open and ends up not responding

Hi,
Safari no longer works for me after a software update. Safari will not open and ends up not responding upon launch at which time I have to force quit.
I have gone through the Mac help forums without finding a suitable answer and I tried the following actions but unfortunately not one is working.
-I have tried to uninstall and install safari again (to uninstall the program I have deleted also all the cookies in preferences and library and application support);
-I have created a new user and safari does not work for the new user either.
It seems to me that the mac feels that a safari window is open but I cannot see it.
Any suggestions would be very appreciated.

A few things you can try (I see you have tried some of them already):
If your Safari won't open, one or more of the following procedures should fix it:
1. Go to Home/Library/Safari/ folder and remove the following two files:
¥ history.plist
¥ lastsession.plist
(Safari may not load properly If these two files are corrupted.)
2. Go to Home/Library/Caches/Metadata/Safari/ and remove the contents of that folder.
(These are just webhistory files and are not required for Safari to run. However, similar to preference files, problems can arise if they have become corrupt.)
3. Locate the cookies.plist file that's located in the Home/Library/Cookies/ folder and remove it.
(Again, faults in stored cookies may interfere with Safari's launch.)
4. Check whether any of your third-party internet plug-ins may be interfering with the launch of Safari by carefully moving them to the desktop (do NOT delete them at this stage). You can find these in two places:
Home/Library/Internet Plug-Ins/ folder, and Global plug-ins are located in the Macintosh HD/Library/Internet Plug-ins/ folder.
Also look in Library/Input Managers where other third party add-ons may lurk. If you find a SIMBL folder, please note that some SIMBLE.bundles may require updating or possibly removal.
Restart Safari and place them back in the correct folders, one at a time, closing and re-opening Safari each time. If you discover that one of them was causing the problem with launching Safari, trash it and download and install a fresh copy.
If Safari is getting very slow:
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
If your computer is part of a network: please refer to this page: http://www.opendns.com/start/bestpractices/#yournetwork and follow the advice given.
You could also try these codes as well: 4.2.2.1 & 4.2.2.2
If you use a Router, make sure it has the latest firmware installed.
One reason for a slowness in page loading may be the 'DNS Pre-fetching' feature of Safari 5.x
This is described here:
http://support.apple.com/kb/TS3408?viewlocale=en_US
If Safari seems to hang for ages:
If you have a lot of tabs open and/or a lot of pages running Flash, Safari can sometimes 'hang', requiring a restart of Safari. This can often be inconvenient, and as it is rarely Safari itself that is hanging but merely one of its plug-ins, usually Flash, there is a way using Terminal to restart the plug-ins (without restarting Safari and losing your tabs) by quitting the WebPluginHost process:
Open the Terminal from the Utilities folder in /Applications and type
killall -9 WebKitPluginHost
Note that this command kills all Safari plug-ins, not just Flash. All plug-ins should start back up when you reload the page.
Then go back to Safari and refresh any pages that were using the Flash plug-in. This also fixes the Beachball of Death. Try this whenever Safari gets slow or freezes. The latest versions of Flash 10.1 appear to have improved the situation somewhat, but haven't completed eliminated it.

Coreaudiod and UserEventAgent both not responding

I noticed in Activity Monitor showing all process on a clean boot I get both coreaudiod and UserEventAgent both not responding. I though this might be something to do with sound but the funny thing is everything seems ok. Audio and video and the general running of the computer seems to be fine unless i had not looked in activity monitor i probably would not of noticed.
If i quit both processes they dont appear again in red not responding.
But if i start an app or play a sound ot video they both pop back up again as not responding yet the system functions as normal seemingly and sound and audio works fine.
Any Ideas. Sure seems a little strange.

OK fixed it after a bunch of research I found 2 plugins that can ause problems in the
go to :
Library\Audio\Plug-Ins folder
I had a folder called HAL which had a plugin for protools which i dont have anyways and i deleted it. Also there is a app called Hear which had a plugin i deleted as well. So basically if you are having similar issues check the various plug-ins in these folders and try removing them The Protools one is a known culprit as well as the Hear one.

Is anyone having trouble with the "home" button not responding after upgrading to 5.1.1 OS?

Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?

You will not belive how I accidently solved this - !!!
Yes I had the problem immediately after the 5.1.1 'cloud' upgrade, the problems started (on my iphone 4) ... I followed the 'get power down button, then hold HOME for 30 secs' solution, but no result, nothing seemed to work and I was starting to get a bit agressive with the keep it pushed, multiple double click frustrations, icopybot multigesture solutions etc. and paid money ... but this comedy solution now works ...
I discovered it because I ordered a waterproof case for my iphone for my motorcycle ... I've just fitted it to my iphone and all the problems have gone ??? what! ... so wondering why I looked at what the home button on the casing was doing - it was pressing ACROSS the home button i.e. it converted my finger point into a wider 'PRESS
so taking the new case off, instead of using the point of my thumb to press HOME, I used the flat of my thumb to emulate it ....and initially nothing, so I wondered if it wa making better 'cross button' contacts, so I licked my thumb, wiped it and then tried again! - it worked!
I can't explain it but it seems to work - try it! if the double click on HOME doesn't work lick your thumb dry it and try again! I've just done it again
what a mad techno world we live in! :-)
Dave

Recently my CS5 illustrator and Photoshop is not responding frequently. How to rectify?

Recently my CS5 illustrator and Photoshop are not responding frequently. keep crashing. Any solution?
Thanks,
Mike

Hi Mylenium,
My imac processor 2.66GHZ intel core i5
Memory 8G 1067MHz DDR3
Mac OS X 10.7.5 (Lion)
When I try to launch CS5 illustrator, sometime it is not responding. It also happen after I launched illustrator and I was just doing some basic design, change type and zoom in and out.
If I opened both CS5 illustrator and photoshop, while I was working on illustrator and when it start not responding, photoshop also become not responding and vice versa.
I hope this information is adequate for you and troubleshoot for me what's wrong with my mac.
Thanks
Mike

Catalyst 2950 and 3750 console not responding after successful boot

Similar Messages

Maybe you are looking for