Catalyst 2950: SNMP queries

Hello,
I want to get the following information from CISCO's Catalyst 2950:
1. Port's status: Up / Down
2. What MAC is connected to the port
3. Number of messages transmitted and received from the port.
What OID should I use for this purpose ?
For a reference I want to use ireasoning MIB browser.
What MIB file should I download from CISCO's FTP site ?
Thanks,
Zvika.

Up/down : 1.3.6.1.2.1.2.2.1.8 (ifOperStatus)
MAC addresses : 1.3.6.1.2.1.17.4.3.1.1 (dot1dTpFdbAddress)
Number of "messages" (I assume you mean packets) : 1.3.6.1.2.1.2.2.1.11 (ifInUcastPkts), 1.3.6.1.2.1.2.2.1.17 (ifOutUcastPkts)
For these objects you'll want the IF-MIB and the BRIDGE-MIB.

Similar Messages

SNMP on Catalyst 2950 switch - possible?

How can I add SNMP to my Catalyst 2950 switch? and what will this give me with regards to network monitoring etc. A lot of my networks go through this device and I what to get stats on port etc. I really hope you can help here.

Hi Chandru,
Here's what you should do. Firstly, go to the following site which will give you a list of MIBs supported on the 2950:
http://www.cisco.com/en/US/products/hw/switches/ps628/products_configuration_guide_chapter09186a00800d84cc.html
Then, open up the Cisco SNMP Object Navigator at:
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en
Within that, click on 'View and Download MIBs' and then select the MIBs you are interested in to download/view them.
As an example, you can get counters on memory pools from the CISCO-MEMORY-POOL-MIB
Hope that helps - pls rate the post if it does.
Regards,
Paresh.

Catalyst 2950 Blocking ports by default?

I see the layout you have, but is something not actually working?
Such as you are not able to access something.

Good day,Working on an old network that has an old unmanaged 24 port switch. They also have a Catalyst 2950 they were able to get. I reset it, setup passwords, enabled SNMP, and gave it an IP address so I can monitor it.I want to move things from the unmanaged switch to the new switch. First, I just connected a single cable between the unmanaged switch and the 2950. Then, I moved a PC from the unmanaged switch to the 2950.After doing so, the computer is still on the network, can see everything, ping everything, etc etc all is good. However, this PC can no longer establish comms on particular ports.PC is .169, other client is .168.When connected to the UNMANAGED SWITCH
Text TCP 192.168.81.169:5413 192.168.81.168:57744 ESTABLISHED TCP 192.168.81.169:5413 192.168.81.168:57745 ESTABLISHED TCP 192.168.81.169:5413 192.168.81.168:57746...
This topic first appeared in the Spiceworks Community

Cisco ISE and Catalyst 2950

Hello!
Please, could you help me? Is it possible to install ISE on Catalyst 2950? In Component Compatibility Guide
http://www.cisco.com/en/US/docs/security/ise/1.0.4/compatibility/ise104_sdt.html
Catalyst 2950 only support 802.1X and VLAN.
At first I need to know about VLAN change(from resticted to corporate). Is Catalyst 2950 support it?
Thaks for help!

this would let both user and machine authenticate. for"5434Endpoint conducted several failed authentications of the same scenario" check Suppress Anomalous Clients option. This issue comes in to picture when endpoint attempts a couple of failed authentications and if Suppress Anomalous Clients option with Reject Requests After Detection is enabled then ISE Policy nodes protect themselves from overwhelming numbers of authentication requests by sending an immediate reject for suppressed clients as opposed to processing all the steps in a normal authentication. So if that user did some authentication failure, he will be locked for 1 hours (bydefault).

Help with Catalyst 2950 G

Hi,
I have a doubt about the Catalyst 2950 series, i need to pass both IP and OSI traffic trought a 2950 switch. Is it supported?
Thanks

The 2950 is a layer2 switch. Anything carried over ethernet will go, no matter which layer3 protocol is used.
Regards,
Leo

Cluster Management Software on Catalyst 2950

Hi There,
I was wondering if anyone would be kind enough to provide me with some help on getting the CMS software running on a Cisco Catalyst 2950 Switch. I have followed all the instructions I could find on getting the software to load from the Switch, but it will not load. Can anyone help me?
Thank you in advance.
John Grikes
[email protected]

You can start from: http://www.cisco.com/warp/public/473/59.html

Catalyst 2950 Switch flash_init error

Hi Everyone,
I'm new to Cisco products and have a small home lab set up. I have a Catalyst 2950 switch that I would like to restore to factory defaults. Here is the issue I'm having and can't figure out.
I pull the power, telnet into the console port, hold the mode button and restore power. The boot loader (Version 12.1(11r) starts and says the usual message the system was interrupted prior to flash initialization (Paraphrasing here)
I get to the switch: command line, enter flash_init. Flash states it initialized and then all I get is a < with an underscore under it prompt. Anything I try to type comes up as bizarre characters and I can not get back to a switch: prompt unless I reboot the switch manually. Unsure of what to do here.
Thanks in advance!
-Matt
Telnet session:
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)
Compiled Mon 22-Jul-02 18:57 by antonino
WS-C2950T-24 starting...
Base ethernet MAC Address: 00:06:52:bb:c9:40
Xmodem file system is available.
The system has been interrupted prior to initializing the
flash filesystem. The following commands will initialize
the flash filesystem, and finish loading the operating
system software:
flash_init
load_helper
boot
switch: flash_init
Initializing Flash...
flashfs[0]: 4 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 3726848
flashfs[0]: Bytes available: 4014592
flashfs[0]: flashfs fsck took 7 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
õíííííí <---These characters appear no matter what keys I hit.

Hi mattymattlynch
Check the workaround on the following documents:
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/41845-192.html
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_22_ea11x/configuration/guide/scg/swtrbl.html
If no luck , the flash might be corrupted and requires a replacement.
Hope this helps
-Randy-

Will Cisco ISE appliances answer SNMP queries ?

Hello,
It is clear that ISE is able to send SNMP traps to a remote SNMP manager machine. It seems to be embeded on Cisco Application Deployment Engine (ADE) OS and explained on this documentation:
http://www.cisco.com/en/US/partner/docs/security/ise/1.1/cli_ref_guide/ise_cli_app_a.html#wp1014133
However it is not clear if ISE machines, regardless service persona type installed, will repond to SNMP queries coming from a remote SNMP manager.
Will ISE appliances respond to SNMP queries, provided SNMP configuration is fine on ADE OS ??
I would like to have a remote NOC to monitor first if ISE machine is up/down before a potential remote login on ISE for further troubleshhoting.
Thanks in advance for your help.
Jorge Mendes

Solution
Yes ISE will reponsed to the query and A similar query is already discussed on the following page with solution to what is asked
https://supportforums.cisco.com/thread/2165257

Cisco Catalyst 2950/2960/3750 Multicast Traffic Preference

Hello all,
we, as a student company act as an ISP for university dormitories. We would like to (if it's possible) deploy QoS to prefer multicast traffic over all other types of traffic.
Devices used in network:
Acces layer: Cisco Catalyst 2950, 12.1(22)EA14
Dristribution layer: Cisco Catalyst 2960G, 12.2(58)SE1
Core layer: Cisco Catalyst 3750G, 12.2(52)SE
Do you see any possibility to solve this with these devices? We have almost no experience with QoS, therefore any help would be greatly appreciated.
Thanks in advance.

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Hmm, I think it should be doable although the 2950s, if non-E variants, are especially weak in QoS features. I.e. those might create some issues.
With the 2960G and 3750G, you often will create problems when you enable QoS because QoS, by default, allocates its buffers resources for 4 egress queues per port rather than using all for 1 egress queue per port. However, this can be countered by QoS parameter tuning, but that takes some QoS expertize to match to your traffic and your overall QoS policy.

Trunking Catalyst 2950 to Catalyst 3750 problem

I cannot seem to figure out how to trunk a catalyst 3750 to a Catalyst 2950.
I've set
3750(config)#interface fastethernet 1/0/2
switchport mode trunk
switchport trunk encapsulation dot1q
BUT my Catalyst 2950 does not offer the "switchport trunk encapsulation dot1q" command
My 2950 is running IOS version 12.1(20)EA1a
is there a work around for this situation. Our network still employs a bunch of these 2950's.

The Catalyst 2950 series can only do 802.1Q trunking. It's the default, and only, choice. So there's no need to specify it when trunking.
In fact, since you don't have a choice of which encapsulation to use, there's no need for a "switchport trunk encapsulation" command. Which is why it's missing from the Cat2950 switch IOS.
This took me by surprise too, when I first transitioned out of the 3500XL series into 2950 and 3550 switches.

POST error Catalyst 2950

I have a Catalyst 2950 series 12 prt. switch. When the switch is booting I receive the following error: "00:00:13: POST: Packet DA mismatch on port: 9"
What does this message means? Can I still use this port?
Kind regards,

This is part of the power on self test(POST).
The switch sets the interface to loopback and sends
a packet. If anything is wrong or changed with
the packet then you get an error. In this case
the DA (destination address) was changed on
the received packet. I assume since this is a
switch they are referring to the layer2 address.
I would think this would indicate a possible hardware
failure.

IP Accounting on catalyst 2950

Hi all,
Is there a way to find out traffic information from source IP to destination IP, like ip accounting used on routers, on the catalyst 2950 switch. My switch has the standard image.
Also what performance impact would it have on the switch, if possible to implement.
Thanks,
George

Hi dukenukem,
no there is no way of interpreting flow information that way on a c2950. A c2950 is a L2 Device. Normally it doesn't really care about ip adresses.
Regards,
Sebastian

DHCP on Cisco Catalyst 2950 Switch

Hello
I need to configure my cisco catalyst 2950 series switch in order to act as DHCP server for devices connected to its ports.
Please say me, how to do that ?
Thank you
Narek

Please find the sample DHCP configuration for one of the VLANs.
Interface Vlan1
description Cisco DHCP
ip address 10.10.2.1 255.255.255.0
ip dhcp pool cisco
network 10.10.2.0 255.255.255.0
default-router 10.10.2.1
domain-name mydomain.com
dns-server 10.10.2.10
netbios-name-server 10.10.2.15
lease 7
A 24 hour lease is the default if left out and the netbios-name-server is WINS in the Windows world.
If you want to use DHCP server for other VLANs as well create similar DHCP pools and assign the DG to the corresponding VLAN interface IP.
HTH, rate if it does
Narayan

CATALYST 2950 SERIES - CLEAR OPT TABLE & DISABLE CASH

I have 2 cisco switches model - catalyst 2950 series, i recently had an network issue regarding an ip conflict with one of my member servers, after being on the phone with microsoft support for 6 days, we were able to resolve the problem by locating the correct mac address and clearing the "OPT table on the switches" by unplugging and replugging the power cord. In order to prevent this from happening again, Microsoft had asked me to contact cisco and ask the following questions, " Are these swiches managable via the gui? and we also need to make sure that the "Arp Cash is disabled on the switches" can anyone help in this matter? Thanks in advance.

Hi Arrowext289,
Thank you for your question. However the Small Business Support Community is limited to Cisco Small Business Products.
Your question below relates to a Cisco Classic Product which our community would not be able to help you with.
The best area for you to post your question would be at the Cisco NetPro forums switching area located here: https://supportforums.cisco.com/community/netpro/network-infrastructure/switching
Best regards,
Cindy
Cindy Toy
Small Business Community Manager
Customer Advocacy
Cisco Systems, Inc.
www.cisco.com/go/smallbizsupport

Catalyst 2950 bandwidth limitation

Hello,
please, can anyone tell me if it is possible to limit bandwidth on Catalyst 2950 switch on per VLAN basis.
Thanks in advance.
Maxime Frolov

Hello Amit,
I'll try to clarify my problem. I have a 2950 (Standard Image) with a giga uplink to a 6500. On the 2950 I have a VLAN composed of 4 ports. I' like to limit the use of the uplink link of this VLAN or at least of one port to 20%. Would it be possible on 2950 SI or I'll have to upgrade to EI whitch implyes hardware changes ? Or it just impossible on 2950 and I'll have to migrate to 3750 ?
Regards.
Maxime Frolov

Catalyst 2950: SNMP queries

Similar Messages

Maybe you are looking for