Catalyst 3.9: indeed a solution for Radeon 9600pro?

Until now I have only been able to avoid system locking up and screen going black
with my Sapphire ATI Radeon 9600pro ultimate (passive cooled),
by reducing the AGP transfer rate from 8x to 4x (plus no fast writing and no sideways writing).
Yesterday I installed the new Catalyst 3.9 driver and until now I had no crash
although I'm using AGP 8X again.
Remark that I'm using system default settings (shadow disabled) and I play no
games at all.
Are there other users with similar experiences?
Azerty

I've been to optimistic, problems are back.
I'll have to return to AGP 4X
Unacceptable for a card of 225 euro.
Azerty

Similar Messages

Envy h8-1409 Desktop-Problem Installing Catalyst Control Center on Wiindows 7 for Radeon HD 7570

Hi,
I just purchased an HP Envy h8-1409 desktop. It came with Windows 8 but I downgraded to Windows 7 due to my unfamiliarity with the new Windows 8.
Officially, HP only provides Windows 8 drivers for this particular model I bought. However, I was able to find another HP desktop model (h8-1360t) that has almost the same hardware that has Windows 7 drivers. I downloaded all the Windows 7 drivers and was able to install properly for everything except for the Graphics Card (Radeon HD 7570). There was an error message during the start of the installation complaining that the driver was unable to find supported hardware on my machine. I ended up using "Windows Update" to get the driver for the Radeon HD 7570.
Having installed the Radeon HD 7570 driver only allows Windows to recognize my graphics card but I was unable to adjust any advanced settings. So I went to AMD's website to get the latest Catalyst Control Center package. During the installation, no error was found and everything seemed alright. However after the installation is complete, I was unable to see Catalyst Control Center anywhere on my computer (e.g. Start menu, right-click menu, etc). Also, when I checked the "ATI Technologies" folder, it was empty!
I also tried using AMD's auto detect agent but my graphics card was not even recognized.
I am running out of ideas on how I can get Catalyst Control Center installed. Please help!

Hello,
Here is an article about downgrading a Windows 8 computer. I hope it helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Installation of ATI driver for Radeon X1300, X1400, V5200 graphic cards on Windows 8.1

Dear Thinkpad users. After many failures and zero support from official resources, this is a comprehensive, unbiased installation procedure for the official ATI driver with Catalyst Control Center for Radeon X1300, X1400, V5200 graphic cards on Windows 8.1. In my experience, the latest driver for these cards written for Windows Vista 32-/64-bit works flawlessly on Windows 8.1 and you will benefit from multi-monitor support, full HW-acceleration and the PowerPlay option in Catalyst Control Center as well. Install only the official ATI driver, no other modification required. (The installation may work also on non-Thinkpad systems, such as Dell etc. but I have not tested it on that systems)
Installation procedure:
1. Before installation, ensure you are logged as an administrator
2. Go to ‘Control Panel’ -> ‘Power Options’ and click on ‘Choose what the power buttons do’ option from the list on the left side of the window
3. Go to ‘Shut-down settings’ on the bottom and disable ‘Turn on fast start-up (recommended)’. Unchecking that checkbox is very important because it will prevent the problem with start-up black screen on the computer.
4. Go to ‘Control Panel’ again and choose ‘Programs and Features’, then click on ‘Turn Windows features on or off’
5. Select the checkbox ‘.NET Framework 3.5 (includes .NET 2.0 and 3.0) to turn it on and wait until the installation is completed
6. Go to Windows update and install all important updates including those for ‘.NET Framework 3.5 as well
7. Download ATI video driver from the website of your hardware vendor. For Lenovo Thinkpad T60, T60p users the latest ATI video driver is for Windows Vista (32-bit, 64-bit), please visit http://support.lenovo.com/ca/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t60... and download the driver
8. Once you have the driver downloaded right-click on the file and choose ‘Properties’ from the drop-down menu.
9. Click on ‘Compatibility’ card then ‘Change settings for all users’ and check in the checkbox at ‘Compatibility mode’ with the option for Windows Vista as well as at ‘Run this program as an administrator’
10. Double left-click and install the program.
11. Go to the location ‘C:\drivers\WIN\VIDEO and open the file ‘Bin’ (for Windows 8.1 32-bit users) or ‘Bin64’ (for Windows 8.1 64-bit users)
12. Right click on ‘Setup’ file; choose ‘Properties’ from the drop-down menu and repeat the step 9
13. Once you have set the properties, double left-click on that file and install the driver
14. Follow the installation instructions and finish the installation
15. Restart the computer
cheers

hey , can u help me ? i am having the same problem

Best email solution for the iPhone

After having messed with this since Friday, I've concluded that GMail is the best solution for iPhone email as of today. Let me explain.
Yahoo Push would be the best if I could specify a different reply-to address. As it stands now, having my emails come from a @yahoo.com address is not acceptable. It seems Yahoo IMAP is the only IMAP that supports push (a marketing decision apparently moreso than a technical one), so push is out until Yahoo or Apple come to their senses.
AT&T is not offering any email options through their service. I used to have mymmode email but that was years ago, and cingularme is down for some reason. Apparently AT&T wants your money for your voice business, but take your email needs elsewhere.
Enter GMail. IF you configre GMail using the GMail option on the iPhone, it forces a @gmail.com address too. However, you can use the Other option and configure using the GMail incoming server (pop.gmail.com), and you can specify the user name ([email protected]) but a different address ([email protected]).
Now, this seems to work only if you use an outgoing server OTHER than GMail's (smtp.gmail.com). During my testing I sent an email and it seemed to come from [email protected] even though I had specified a different address in the Address field. I did not test much as I have another outgoing email option.
As I have Verizon FIOS at home, I can use my outgoing.verizon.net server authenticating using my Verizon.net address. The added bonus here is that it works in either WiFi or Edge, as Verizon's server doesnt care where you are as long as you authenticate.
My email IDs are overrun with SPAM and GMails SPAM filters are excellent. this has the added bonus of cutting down on unwanted email on the iPhone.
Thoughts?

I am essentially doing the same thing for my Exchange account, which SMTP server can't be reached while off of the campus. I use AT&T's own SMTP server for wireless (cwmx.com, I think), and it doesn't change my From: address, so it shows as though I sent it from my campus's Exchange server. Very handy indeed!

Temporarily solution for ATI Mobility HD 3470 driver

Hi guys,
I have found a temporarily solution for installing ATI Mobility HD 3470 driver, as shown following:
1) Disable Intel X4500 in BIOS;
2) Download a software named as driver genius and install it;
The software can be download at:
http://drivers.mydrivers.com/downloa...XP-2003-Vista/
or
http://count.mydrivers.com/download....us_v2008b5.zip
3) Run driver genius and select the item of driver update (the first button on software interface). In the software, this item is shown as "驱动更新" due to it is a Chinese version;
4) Select your display adapters from the hardware list shown soon;
5) Click the green button on the lower right corner to start updating and installing the driver automatically. The button is shown as "开始更新" in the software;
6) Reboot the laptop after the driver installing completed;
7) The ATI 3470 display adpater will be shown in device manager as "ATI mobility readon HD 3400 series" if the install is successful. After the operation the VISTA score can be update to be 4.7, while a score of 3.8 can be got for Intel X4500 display adapter.
When installing X4500 display adapter, the ATI 3470 adapter should be disabled in BIOS. Then you can update the driver for X4500 adapter following similar procedure for ATI driver installing.
Hope this can be helpful for you guys!! Wish you luck!!

i want to get latest driver for grafic card ati mobility radeon 5650

I have a problem openning my Itune home, I'm getting unknown error 0x80090308, any body has a solution for this problem

I have a problem openning my Itune home, I'm getting unknown error 0x80090308, any body has a solution for this problem

hi marco
I found the problem. Do you have other wi-fi (w-lan) like repeater or tv-transmitter or d-link etc. if yes, please disconnect them once and try again after restarting the time-capsule resp. change the channel if you can to another one. then it should work again.
@ home i have a tv-transmitter via wi-fi and indeed, i changed the channel from 1 to 6 or something like that, then the iphone worked again.

Can't find the software for Radeon (TM) HD 7690M TX

Hi, I can't find the software for Radeon (TM) HD 7690M TX . I have a hp pavillion dv6c19tx but I can't find it? Can anyone just give me the link. I tried installing the Hp pavillion dv6c47tx but i can't install it. Please help

Hi JoshuaTey,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are looking for your AMD drivers for your notebook and I will be happy to help. Let me start by getting your product number and your operating system.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

ATI driver for Radeon 6490M (fglrx)?

Is Arch Linux suport fglrx drivers for Radeon HD 6490M?On ubuntu Oneric I can't install it.
Last edited by foki (2012-03-22 21:09:01)

It seems that the HD 6490 (without M) is officially supported by fglrx: http://wiki.cchtml.com/index.php/Hardwa … _Supported
Archlinux has an AUR package containing the official Catalyst driver for AMD cards: http://aur.archlinux.org/packages.php?ID=29111
You could try that.

Providing DRC solution for ATMs in the enterprise network

Hi all,
I am looking for ideas on how to provide a Disaster Recovery solution for thousands of ATMs (Automated Teller Machine) deployed in the bank enterprise network. The solution should consider
the following facts:-
1.- Having the ATMs switch the connection to the Server at DRC shouldn't be automatic. This situation might last for the next few years until DRC becomes mirror image of primary data center.
2.- The ATM servers at the primary and disaster recovery center is single server equipped with high availability (Tandem). I mean to say, there is no SLBs invloved in the connection
3.- The application running on the ATMs is calling the ATM Server by hardcoded IP address in the application. The bank is willing to visit the ATMs to change once and forever.
I see source natting as the most appropriate solution, however your opanion and expertise are appreciated.
Thanks
Sami

Sami,
what kind of solution are you looking for ?
Is the concern the connection from ATM to central location ?
Or is it a concern about the server at the central location ?
For connection issues, I don't see any other solution than providing multiple lines.
If the concern is the single server, you could have a loadbalancer somewhere in your network.
The loadbalancer can use probes to check the health of the server.
If the primary fails, or is unreachable, you can automatically redirect the traffic to the standby.
ATM machines will point to the virtual ip (you could reuse the current ip and assign a new one to the servers).
Not sure where to place the loadbalancer without a better idea of the problem to solve and the network.
Gilles.

I wonder to know what is the enterprise solution for windows and application event log management and analyzer

Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.

Consider MS System Center 2012.
Rgds

Small Office Network Solution for Final Cut Server - Proxy Storage Etc.

Hi,
I haven't been able to find any answers for this question by googling, So I would love if anyone here had some advice. I have the 10 License version of Final Cut Studio with 5 clients at the moment. I would like to set-up our office in the most effective way, however we are a non-profit organization, so we are working with a limited budget.
My question is, does anyone know of any networking solutions for Proxy Storage and Media storage, that wont bottleneck, but is not as high budget/high tech as using an Xserve/XSan system?
Right now we would be looking at running Final Cut Server off of our 24inch Intel IMac (Going to beef up the RAM). We have a Gigabit Switch, 4 more intel machines running final Cut pro, and a direct attached Drobo for Media Storage. I know this is not an Ideal set-up, but it's what I have to work with right now. So, I'm looking for any kinds of tips and tricks to make this set-up work for us, and am looking at purchasing either a Network Attached or iscsI storage system for the Proxy Storage.
I hope this is a decent description of my situation, and would love some advice.
Thanks Very Much,
MacNomad

Hi,
I haven't been able to find any answers for this question by googling, So I would love if anyone here had some advice. I have the 10 License version of Final Cut Studio with 5 clients at the moment. I would like to set-up our office in the most effective way, however we are a non-profit organization, so we are working with a limited budget.
My question is, does anyone know of any networking solutions for Proxy Storage and Media storage, that wont bottleneck, but is not as high budget/high tech as using an Xserve/XSan system?
Right now we would be looking at running Final Cut Server off of our 24inch Intel IMac (Going to beef up the RAM). We have a Gigabit Switch, 4 more intel machines running final Cut pro, and a direct attached Drobo for Media Storage. I know this is not an Ideal set-up, but it's what I have to work with right now. So, I'm looking for any kinds of tips and tricks to make this set-up work for us, and am looking at purchasing either a Network Attached or iscsI storage system for the Proxy Storage.
I hope this is a decent description of my situation, and would love some advice.
Thanks Very Much,
MacNomad

HP Solutions for Install Errors for HP Officejet 6500

I recently purchased a new laptop with Windows 7 operating system. My printer is 2 years old. Windows 7 located and initially installed the printer. It worked fine at first, but after I changed the black ink cartridge, the printer would no longer print in black. Pages come through, sounds like they are printing, but they are blank or with some color (depending on the document). I have downloaded HP's install of this printer's software (took over 3 hours), seemed fine, but now it's back to no black print. I have tried to reinstall (again), but it gets stuck installing the wireless. HP sent Solutions for install, icon. Suggests disconnecting and shutting printer, modem, and computer down, then using printer install CD and reload. I have the CD, but it doesn't work with Windows 7. What to do?

This article should help resolve your blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Solution for scanning multiple pages from inside the form6i/10g

Hi All,
I need to scan multiple pages from Oracle forms (6i/10g) using a scanner which is scanning multiple pages per minute. Can any one post a solution for me.
Hafeez

here are the two ways I use to scan images.
1) if the image is a single TIF image then d2kwutil can upload the image into a BLOB field on the database (but it is limited to only SINGLE-page TIFs).
2) if the image is a single or multi-page PDF, then your forms client must copy the image to a filesystem location known by the database (where the filesystem location is a directory on the database), and then the database can import the image into a BLOB field within the database.
either solutions work pretty fast for me (<10 seconds per image)
Chris

Solution for: no audio in time line - conforming issues - unspecified error occurred

these are all the same issue and i have the solution for it.
Adobe has once again let down the non professional user but ignoring this bug. They have also deleted alot of my other posts on the adobe forums.. perhaps so you cannot receive help from me?? who freakin knows..
b Problem:
you import your footage and there is no audio in the time line. you see the audio clip there but no information in it. some people say its because of MPEG format but MPEG files works fine in Windows Movie Maker, Ulead, Pinnacle, Sony Vegas.. etc...
let it be known that its an Adobe Premiere issue.
b Solution:
b step 1:
close adobe premiere
b step 2:
open My Computer and go to tools at the top. From the drop down menu go to folder options. In folder options click the view tab. In the advanced settings section where it says 'Hidden files and folders' make sure 'show hidden files and folders' is selected.
b step 3:
open My computer and go to c:\ drive > Documents and settings. Now click into your user name (NOT 'All users') in my case its 'proGamer'. Now click into 'Application Data' > 'Adobe' > 'common' > 'Media Cache Files'.
b step 4:
in this folder find the files you were just trying to import by searching the name. in my case its file: 20081217030338. you will now see 3 different file types with the same file name you were importing: CFA, PEK, MPGINDEX. delete them all!
b step 5:
go back and open adobe premiere, open up your project again and it will automatically recreate those files you just deleted. hopefully correctly.
b NOTE:
If this hasn't worked then open your adobe premiere project, clear all trace of the files with no audio and start again from step 1. then after step 5 just import the files back into your project.
This has proved to work with every file i've imported that had the audio not conformed.
b your second option:
simply play your clip in WMV or VLC or what ever player you use and record the audio in real time in stereo by using some music editing like cubase or logic audio. you can also use something more friendly like 'recordpad' found here: http://www.nch.com.au/recordpad/screenshots.html now you can buy it from these guys or get it how ever else you like
lemme know how u go

dmd,
I've read plenty of places that they know about the bug and are going to fix it. Will from Adobe said so in a few older posts. It's also listed as an issue in the 4.0.1 readme.
I agree that this is the most screwed up Adobe release ever but I doubt they're deleting your posts to hide it. Never know though.....
"Adobe has once again let down the non professional user but ignoring this bug" I actually wish Adobe would forget the consumers and make Premiere Pro more friendly to professionals. Dozens of multimillion dollar movies have been edited with Avid and Final Cut over the past few years. Adobe doesn't put forth any effort make Premiere a pro application. Because they pander to the consumers and prosumers they end up messing up the product for everybody.
Premiere Elements is for consumers, Premiere Pro should be for the 'Pros'

Is there a solution for Higher Ed Computer Labs?

I am an instructional Technician for the Photography Department at a Community College. We currently purchase and use the Creative Suite 6 Design & Web Premium here in the Photography, Graphics and Journalism departments. We have over 150 Macintosh computers licensed with your product and we are very interested in the Creative Cloud.
Currently we purchase the licenses for all of our student and faculty computers, we are hoping that you will be developing an education solution for computer labs like ours.
What we would like to see is an arrangement that would allow our students to subscribe to the Creative Cloud for a three-month period that would be paid for prior to the first day of classes. This would avoid classroom disruptions from students failing to pay if the subscription was on a month-to-month basis.
While I understand that the current Student and Teacher edition at $19.95 is a limited promotion, a price of $20–$25 per month or $75 for a three-month period would be less than the cost of a textbook and could be easily charged as a class fee.
A potential problem is that students sometimes do not use the same computer all the time. If students are taking multiple classes in different labs, they need to be able to access the programs on several computers. I am currently subscribed to the free trial month and my impression is that the subscription is dependent on logging in with an Adobe ID. If this is the case, students should be able to use this log in to access the software they need on whatever computer they are at as long as they have an active (paid) login, and are not logged in on another computer.
As it is everywhere in education, our program budgets are tight. The Creative Cloud would allow us to save a significant amount of funds while still offering the most current technology to our students and faculty. The ability to access any software we need and allowing students the ability to access the programs at school and at home will empower both our faculty and students. Additionally, the availability of cloud storage will allow students to work on files at home and at school seamlessly.
I am making several assumptions:
Pricing –
Student and faculty pricing will be available.
A price will be established for a three-month period to facilitate a college semester.
Access –
Students will be able to access the programs on more than one lab computer.
Is access controlled by logging in with an Adobe ID?
Once the software has been installed on a computer, will any student with an Adobe ID be able to access it?
We are hoping to be able to implement this by next fall, so I am anticipating that these details will be worked out before then.

Great to know this I will be sharing it with my professors also. To have the "team" version would be great! Many problems occur for students with portable storage units. The worst is forgetting to download a project and take it with you. which really hurts our timing on a project to completion. Also as the projects grow in size we can end up with storage issues as some files are very large. This sounds like a grand solution.
Thank you for answering my question earlier Mr. Rice. Now I need to get back to my assignments. bye.

Catalyst 3.9: indeed a solution for Radeon 9600pro?

Similar Messages

Maybe you are looking for